Beli Emco Maximat Super 11 bekas (140)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.500 mm, diameter pembubutan: 520 mm, kecepatan spindel (maks.): 3.200 rpm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 1.055 mm, berat benda kerja (maks.): 1.200 kg, en-01 Kwjdpsv Hqntofx Aglet

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), X-axis: 210 mm, Z-axis: 610 mm, swing diameter over bed/cross slide: 540/360 mm, max. turning diameter: 310 mm, length: 1730 mm, width: 2860 mm, height: 1880 mm, weight: 4.3 t, equipped with FMB unirobot MH5L-XP automation. Kjdpfxjg Rcf Ss Aglswt

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), X-axis: 210 mm, Z-axis: 610 mm, swing diameter over bed/cross slide: 540/360 mm, max. turning diameter: 310 mm, length: 1,730 mm, width: 2,860 mm, height: 1,880 mm, weight: 4.3 t, equipped with FMB unirobot MH5L-XP automation. Ksdpog Rcf Iefx Aglewt

Kondisi: siap digunakan (bekas), Emco emcomat FB4 Mesin Milling Kontrol CNC pada sumbu X dan Y oleh Proto Trak Tipe AGE 2 Juga dapat digunakan secara konvensional. Spindle taper SK40 Kecepatan spindle: 50-2500 rpm X-axis: 450 mm Y-axis: 300 mm Z-axis: 350 mm Kjdpfsxc H I Rjx Aglowt Panjang meja: 800 mm Lebar meja: 400 mm Dilengkapi dengan sistem pendingin, emergency stop, dan pelindung meja dengan interlock.

Kondisi: bekas, Tahun pembuatan: 2017, Emcomat E300 untuk dijual. Mesin tahun pembuatan 2017. Tipe mesin: EM300x1500 SIEM Beberapa perbaikan telah dilakukan, dan kami mengetahui kekurangan berikut: Geometri telah diperiksa. Rel pemandu Z di area spindle utama (chuck) agak aus. Slider Z miring pada sumbu X dan Y di bawah beban hingga 0,1 mm, artinya pada area ini dengan tekanan penjepit tinggi tidak memungkinkan pengerjaan presisi lagi. Pemutar alat telah diperiksa dan disetel. Kwedpfxsw I S Uus Aglst Sabuk sumbu X diganti dan titik nol mesin diatur. Pelumasan sabuk otomatis - kehilangan oli: masalah sudah diperbaiki setelah pengecekan, saluran oli pelumas diganti. Mesin berfungsi – dengan catatan pada pemandu sumbu Z.

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 25 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan rotasi (min.): 5.000 rpm, tinggi total: 1.800 mm, panjang total: 2.500 mm, lebar total: 2.200 mm, berat keseluruhan: 2.600 kg, saluran batang: 25 mm, Diameter batang (maks.): 25 mm, Emco ET425 2 main spindles, 2 pick-off spindles 2 turrets, 12 tools per turret or 4 driven tools with double loading magazine Kodpfjw Adxpox Agljwt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Machine available IMMEDIATELY with extensive accessories from the Mayrhofen factory for sale to the highest bidder Kwodonk Uabjpfx Aglot

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 17.300 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Q4A124301, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 300 mm, kecepatan spindel (maks.): 10.000 rpm, jumlah slot dalam magazin alat: 20, en-001 Kwsdpfexa Araox Aglot

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 720 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D4D194801, diameter putar di atas sled silang: 190 mm, lubang spindel: 50 mm, diameter pembubutan di atas alas geser: 340 mm, tinggi pusat: 170 mm, kecepatan spindel (maks.): 3.000 rpm, This machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Centre distance: 700 mm Centre height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool shank cross-section: 20 x 20 mm Main drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral offset: ±13 mm Kwedpfsv Iqm Sjx Agljt Permissible Workpiece Weights Between centres: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle centre height above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS 3-jaw chuck Ø200 - 5 x quick-change tool holders B25/120 - Tool kit - Fixed centre MK 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 470 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D4D210301, diameter putar di atas sled silang: 190 mm, lubang spindel: 50 mm, diameter pembubutan di atas alas geser: 340 mm, tinggi pusat: 170 mm, kecepatan spindel (maks.): 3.000 rpm, The machine was used for training purposes only and has approximately 460 spindle hours. TECHNICAL DETAILS Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speed: 40 - 3,000 rpm Speed control: Infinitely variable Speed ranges: 4 Speed intervals: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Kedpov Iqlzjfx Aglewt Quill taper: Morse taper 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Center height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS three-jaw chuck Ø200 (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool set - Fixed center MK 5 - Turning tool set (3 x standard, 1 x parting tool)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, jam operasional: 272 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S4E150081, panjang pembubutan: 510 mm, diameter putar di atas sled silang: 300 mm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 510 mm, kecepatan rotasi (maks.): 6.300 rpm, diameter pembubutan di atas alas geser: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control system: Siemens Sinumerik Operate Travel Range X-axis travel: 160 mm Z-axis travel: 510 mm C-axis: 360° Main Spindle Draw tube internal diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (internal diameter): Ø 80 mm Drive power: 8 / 13 kW Tool Turret Number of tool stations: 12 Tool holder shank: VDI 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 units Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in X-axis: 4,000 N Feed force in Z-axis: 6,000 N Positioning accuracy Ps (per VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. clamping force: 6,000 N Inner taper for live center: MT 4 MACHINE DETAILS Spindle hours: 272 h Center height above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Kwedpfx Aev Imzfjglst Coolant system: 250 l Pump capacity at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar feeder - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Electronic handwheel - Cleaning gun / Multiflow - Pneumatic automatic parts catcher - Fully automatic machine door - Chip conveyor - Comprehensive tool set - Three-jaw chuck

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, jam operasional: 290 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F1F 161101, jarak pergerakan sumbu X: 190 mm, jarak lintasan sumbu Y: 140 mm, jarak gerak sumbu Z: 260 mm, kecepatan spindel (maks.): 3.500 rpm, lebar meja: 125 mm, panjang meja: 420 mm, kecepatan rotasi (maks.): 14.000 rpm, Milling machine including engraving spindle unit and 4th axis, as well as automation preparation! The machine was used for training purposes only and has approximately 290 spindle hours. TECHNICAL DETAILS Travel X-axis: 190 mm Travel Y-axis: 140 mm Travel Z-axis: 260 mm Usable carriage travel Z-axis: 120 / 190 mm Distance spindle nose – table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling Table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots to DIN 650: 2 pcs., 11 mm T-slot spacing: 90 mm Milling Spindle Drive Kwsdpjv Ip Izjfx Aglot Three-phase asynchronous motor power: 0.75 kW Speed range (steplessly adjustable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool Changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with / without changer: Ø 40 / 60 mm Feed Drive Precision via 3-phase stepper motors: 0.5 µm Feed rate and rapid traverse: 0 - 2 m/min Mean positioning deviation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Overall height: 980 mm Total weight incl. tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D-View simulation software - 8-position tool changer with pick-up system and air blast device - Electronic handwheel - Swiveling table with keyboard drawer - Pneumatic vice 72 mm - 4th axis with 3-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and clamping nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating manual with spare parts list

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A8EW4982, diameter pembubutan: 250 mm, kecepatan spindel (maks.): 6.300 rpm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 300 mm, model controller: Sinumerik Operate, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 100 mm Travel Z-axis: 300 mm C-axis for main spindle: available C-axis speed: 0 - 1,000 rpm Main drive power: 5.5 kW Main spindle speed: 60 - 6,300 rpm Tool turret: 12-position VDI16 Driven tools: 6 units Driven tool speed: 200 - 6,000 rpm Driven tool drive power: 1.2 kW Max. finished part length: 120 mm Max. finished part diameter: 25 mm Max. finished part weight: 0.5 kg EQUIPMENT - Coolant system - Pneumatic hollow clamping cylinder - Pneumatic tailstock - Full enclosure - Central lubrication - WinNC for Sinumerik Operate -I/M - Machine license M.M - Keypad module SINUMERIK Operate - MOC: Integrated PC with 12" color display, keyboard and mouse - Safety features according to CE - Various tool holders (Radial tool holder M4 (2x), Radial tool holder M3 (1x), Collet holder ESX 16 (2x), Set of collets ESX 16 (1x), Indexable insert drill holder Ø16 mm (1x), Boring bar holder Ø10 mm (1x), Radial angular milling holder 90° (1x), Axial straight milling holder (1x)) - Various clamping systems (RÖHM power chuck KFD #HS 895/3 with 926 mm passage, 1 set of soft top jaws (432 095) with 1/16" × 90° fine serration, set of hard reversible jaws 95/3, collet chuck 385E / 5C incl. draw tube (A8Z 150 010) for draw-in collets 385E / 842 / 5C Ø2 - 25.5 mm Kwodpfx Agjv Dlr Ioljt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R6AP3801, panjang pembubutan: 600 mm, diameter pembubutan: 360 mm, model controller: Siemens CNC 840 D, TECHNICAL DETAILS Swing diameter: 360 mm Turning length: 600 mm Control: Siemens CNC 840 D MACHINE DETAILS Operating voltage: 400 V~ Phases: 3/PE Frequency: 50/60 Hz Maximum current: 48 A Rated current: 36 A Kwjdpfow Em A Ajx Agljt Short-circuit current (Ik): 6 kA EQUIPMENT - Twin spindle

Kondisi: hampir baru (bekas), Tahun pembuatan: 2001, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 200 mm, lubang spindel: 50 mm, diameter pembubutan di atas alas geser: 350 mm, panjang pembubutan: 700 mm, panjang total: 1.650 mm, lebar total: 1.050 mm, tinggi total: 1.650 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 35 rpm, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 35 rpm, jenis arus masuk: tiga fasa, diameter chuck tiga rahang: 200 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - Multifix quick-change tool post with 3 holders - coolant system Kodpfxewy Hvxo Aglewt - machine lighting - live center - bed stop - machine feet

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Penggunaan Logam Jenis produk Mesin bubut Mode operasi Manual Nomor seri 8303059 Kecepatan spindle maksimum 2200 rpm Merek Emco Daya yang dibutuhkan (kW) 1,4 Negara dan wilayah produksi Austria Sumber energi Listrik Jenis kontrol Konvensional Kwedpfsyalhxex Aglet Berat mesin (kg) 300 Model/Tipe Maximat Super 11 Tahun produksi 1983

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, EMCO Maximat Super 11 – Precision Lathe in Excellent Condition Kjdpfx Aoxqx Nveglowt For sale is a pre-owned EMCO Maximat Super 11, a robust and precise universal lathe "Made in Austria." This machine is ideally suited for workshops, training facilities, or discerning hobbyists who value quality and accuracy. The machine is used but well-maintained and in full working order. All gear changes are smooth, the guides are in good condition, and the machine has been regularly serviced. Technical Data: Centre height: 140 mm Distance between centres: 600 mm Speed range: 55 – 2200 rpm (8 geared steps) Tailstock: MT2 taper Toolholder: Quick-change toolpost Lighting: Integrated LED work lamp Weight: approx. 360 kg Dimensions (L × H × W): approx. 1.3 m × 1.2 m × 0.6 m Condition & Accessories: Machine runs smoothly with minimal vibration Tailstock operates easily and can be adjusted precisely Quick-change toolpost included LED work lamp for optimal visibility Various clamping devices or tools can be purchased additionally by arrangement Price: The price is within a reasonable range and negotiable. Open to price discussions with serious enquiries. Other Information: Collection preferred, viewing by appointment The machine can be demonstrated under power

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Bubut Emco Super 11 CD. 380V, motor 3 tahap 2 kecepatan, operasi halus. Poros utama digerakkan melalui girboks, roda gigi berjalan dalam oli. 8 kecepatan spindle dapat diatur dari 55 hingga 2200 rpm. Girboks Norton untuk pemotongan ulir yang mudah. Gerakan otomatis memanjang dan melintang. Senter tailstock MK2. Pompa pendingin terletak di bagian belakang kabinet dasar. Pelindung chuck. Penukar alat pelepas cepat. Jarak antara senter: 650 mm. Tinggi senter: 140 mm. Diameter spindle: 35 mm. Kwodpoyalrksfx Aglst

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Lathe EMCO Maximat V13 380 Volts Serial No.: D1E8706022 Machine No.: 99826 Condition: used Kedpfx Agsv H Uklelewt Location: 86928 Hofstetten Price: €8,900 / net

Kondisi: bekas, Tahun pembuatan: 1990, diameter putar di atas sled silang: 210 mm, lubang spindel: 31 mm, diameter pembubutan: 320 mm, tinggi pusat: 165 mm, Machine can be tested under power and is fully operational. Includes accessories. Collet equipment is included. Kedpfx Agowpkd Sjlswt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 56.089 h, KRnlc2hkbDQ3 Kodjw Dfhuspfx Aglewt

Tahun pembuatan: 2007, jam operasional: 8.500 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Vertical Machining Center Emco FAMUP MCX 750-1200 with 40 bar Through-Spindle Coolant Year of manufacture: 2007 Control: Fanuc 21i Operating hours: 8,500h Chip Blaster high-pressure system - Max. spindle speed 8,000 rpm • Tool magazine with 24 magazine slots (ISO 40) • Tool holder ISO 40 - 24 draw bars ISO 40 • Standard paint: Red – Grey – Black • Spindle prepared for high-pressure cooling (Connection A) • Tapping without compensating chuck • Central lubrication system • Chip removal from enclosure via flushing device • Cleaning pistol for work area, clamping devices, parts • Coolant system with 3 adjustable nozzles • Coolant tank 500 l • Spindle air blast device for cleaning the taper during tool change • Work area illumination with 24 V halogen lamp • Two-color alarm lamp TECHNICAL DATA MCX 750 X-axis travel (longitudinal): 750 mm Y-axis travel (crosswise): 500 mm WORKING AREA Z-axis travel (vertical): 640 mm Clamping surface: 900 x 520 mm T-slots: Number, width, spacing 5x18x100 mm Max. table load: 400 kg TABLE Distance table surface – floor: 925 mm Speed range: 50 ÷ 8,000 rpm Spindle motor power: 13/9 kW Tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive: Belt drive Rapid traverse X,Y,Z m/min: 24 Working feed X,Y,Z m/min: 20 AXIS DATA Axis acceleration (X,Y,Z) G: 0.25 Kwjdpfxeh Akhks Aglst Unidirectional positioning accuracy across entire travel XYZ µm: ±8 Repeating precision X, Y, Z µm: ±8 PRECISION Reversal error µm: 5* Number of tool stations: 24 Tool selection: random Max. tool diameter with (without) adjacent tools ø: 75 (150) mm Max. tool length: 250 mm Max. tool weight: 6 kg TOOL CHANGE Tool change time (tool/tool): 1.5" Connected load: 20 kVA Dimensions LxWxH: 2,650 x 2,400 x 3,050 mm Weight: 5.5 t.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, daya motor spindle: 29.000 W, kecepatan spindel (maks.): 5.000 rpm, berat keseluruhan: 620 kg, jumlah sumbu: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turn-mill center features a main and a sub spindle, each with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle offers speeds up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the advanced Sinumerik ONE control system. If you're looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have offered for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Sub spindle (direct drive): • Max. drive force: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and Axes: • Upper cross slide with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, tool interface BMT55P • Spindles and Clamping: • High-pressure cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the sub spindle Kjdpfx Agex D E Hbolewt • Programmable clamping pressure for main and sub spindle • External feed flushing on main and sub spindle • Mechanical holding brake on main and sub spindle • C-axis for main and sub spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB • SHOPTURN conversational programming • 3D simulation and drawing • Residual material detection • External memory unlocking • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and Operating Materials: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioner • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/Measurement: • Glass scales: X1 (incl. air unit), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic mount for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / dynamic balancing (SINUMERIK option) • Optional end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Sub spindle as tailstock (SINUMERIK option) • Bar loader (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, produsen pengendali: SIEMENS, model controller: SINUMERIK, tinggi total: 2.450 mm, lebar meja: 325 mm, panjang meja: 850 mm, beban meja: 150 kg, kecepatan spindel (maks.): 5.000 rpm, daya motor spindle: 9.000 W, jumlah sumbu: 3, This Emco VMC 300 vertical machining center was manufactured in Austria in 2003. It is equipped with a SIEMENS SINUMERIK control system. Additional Equipment • Maximum torque: 100 Nm (at 5000 rpm), 78 Nm (optional at 8000 rpm) • Tool change time: T1: 5.8 s, T2: 3.9 s, T3: 3.9 s // Chip-to-chip time (VDI 2852): T1: 8.9 s, T2: 7.0 s, T3: 7.0 s • Coolant system: Tank capacity 100 liters / Flow rate 10 l/min / Maximum delivery pressure 3.7 bar / 4 external nozzles Ksdpfxoya Hg Nj Aglewt • Lubrication system: Automatic central lubrication for guideways and ballscrews / Grease lubrication for main spindle bearings • Pneumatic connection / System pressure 5 - 10 bar • Minimum air flow rate 750 l/min / Average air consumption 180 l/min • Electrical connection: Mains connection 3/PE ~ 400 V 50/60 Hz / Connected load 15 KVA / Main fuse 35 A slow-blow Machine Advantages Technical machine advantages • Qualitative advantages of the machine: • Reliable 12-station tool changer system • Integrated automatic lubrication system for guideways and ball screws Technical Specification Taper size: SK 40 Dimensions Machine depth: 2300 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 4.902 h, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 40 mm, jarak gerak sumbu Z: 610 mm, tinggi total: 2.500 mm, berat keseluruhan: 6.000 kg, produsen pengendali: SIEMENS, model controller: Sumerik 810 D, jumlah sumbu: 3, This 3-axis EMCO Turn 365 TCMY was manufactured in 2003 and is equipped with a 12-position tool turret, VDI 30 tool holders, and driven tools with a speed range up to 4,000 rpm. It features a power chuck, live center, collet chuck device, and additional tool holders. This machine is ideal for precision turning operations and provides robust features with a spindle bore of 65 mm and a Z-axis travel of 610 mm. Contact us for more information about this machine. Additional Equipment • Oil cooler • Parts catcher Machine Advantages Qualitative Advantages • Machine in very good condition Technical Advantages • Swing diameter over flat bed: 360 mm • Workpiece dimensions with tailstock: 200 × 520 mm diameter • Tooling system: 12-position tool turret • Driven tool speed range: 0-4,000 rpm • Operating voltage: 400 V • Frequency: 50-60 Hz • Rated current: 29 A Additional Information Available tooling and accessories: Power chuck: KITAGAWA BB08, Live center by RÖHM, Collet chuck device with 11 collets, 8 driven tool holders, various left- and right-hand turning tool holders, various holders for boring bars and drills, various turning tool holders for indexable inserts. Scope of supply: 1x Kitagawa power chuck 1x live center 8x driven tool holders 1x collet chuck with 11 collets Kjdpex D H Adofx Aglowt 5x boring bar holders 7x turning tool holders, left and right Dimensions Machine depth: 4,000 mm