Beli Feutron Iklim Chamber bekas (2.566)

Kondisi: sangat baik (bekas), We are offering a climate test chamber here. Air-cooled Test chamber nominal volume: 280 liters Dimensions Exterior chamber dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door opening (clearance): 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climatic range: +10 to +95 °C Humidity range: 10 to 95% RH Humidity variation over time: ≤ ± 3.0 Water supply for humidifier: Mains water or distilled water, 20L reservoir Power supply: 400 V 3/N/PE, AC, 50 Hz Max. power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a Important information for your safety as a buyer! The following points are carried out on our offered chambers in advance: Nodpfx Aasiz Tqcshsdf 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored using calibrated equipment. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors!) For further questions, please do not hesitate to contact us by phone.

Kondisi: sangat baik (bekas), Feutron Type: 3702/06 Climate Test Chamber, Water-Cooled Technical Specifications: Test Chamber Nominal Volume: 2.0 m³ Dimensions: Outer test chamber, with humidifier console Width: 2970 mm Height: 2370 mm Depth: 1530 mm Rear panel Minimum installation dimensions: Width: 2970 mm Height: 2390 mm Depth: 1550 mm Test chamber internal dimensions: Width: 2000 mm Height: 1000 mm Depth: 1000 mm Doors: Double-leaf, clear opening width 2000 mm, height 1000 mm Heated viewing windows, 2 units, width 500 mm, height 600 mm Feedthrough opening, 1 unit, left side wall, Ø 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature variation, over time ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in air supply without load: Cooling up to 2.0 average K/min Heating up to 2.0 average K/min Humidity range: 10...95 % r.h. Humidity variation, over time ≤ ± 3.0 % r.h. Dew point range, temporarily up to -5...95°C Refrigeration unit: water-cooled, semi-hermetic Bitzer unit Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration unit air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class IP20 Weight: 1300 kg Condition: used Scope of supply: (see pictures) Ndedsk E Hnqjpfx Aahsf (Alterations and errors in technical data, information subject to change!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Here we offer a temperature test chamber. Feutron temperature test chamber, air-cooled Test chamber nominal volume: 280 liters Dimensions: Test chamber external: Width 1540 mm x Height 2090 mm x Depth 1240 mm With fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Ndjdpfsqxavaox Aahjf Test space: Width 720 mm x Height 690 mm x Depth 560 mm Door opening (clear width): Width 720 mm x Height 690 mm Heated viewing window: Width 500 mm x Height 600 mm Installation dimensions of the chamber with doors open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthrough openings: 2 pieces, left side wall, ∅ 100 mm Temperature range: -70°C to +180°C Heating rate: 3.0 K/min Cooling rate: 3.0 K/min Power connection: 400 V 3/N/PE, AC, 50 Hz Max. power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following procedures are carried out in advance for the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and details!) We will gladly answer any further questions by phone.

Kondisi: sangat baik (bekas), Feutron TPK 3403/15 temperature test cabinet -40 to +100°C Nsdpfx Asf E N Sxeahedf

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm Ndjdpfxjklv H Io Aahof /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Feutron temperature test chamber We offer a temperature test chamber here. Feutron temperature test chamber, air-cooled Test chamber nominal volume: 280 liters Dimensions Chamber external: 1500 x 2040 x 1075 mm With fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Ndjdpfxok Scxme Aahjf Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Power supply: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following actions are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run using calibrated measuring instruments. Condition: used Scope of delivery: (See images) (Specifications subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Feutron Model: 3416/17 Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions: External Dimensions (Test Chamber): Width 1540 mm x Height 2090 mm x Depth 1240 mm With Fan Motor and Door Removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test Chamber (Internal): Width 720 mm x Height 690 mm x Depth 560 mm Door, Clear Opening: Width 720 mm x Height 690 mm Observation Window, Heated: Width 500 mm x Height 600 mm Installation Dimensions of Temperature Test Chamber with Doors Open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthroughs: 2 units on left sidewall, each ∅ 100 mm Temperature Range: -70°C to +180°C Heating Rate: 3.0 K/min Cooling Rate: 3.0 K/min Power Supply: 400 V 3/N/PE, AC, 50 Hz Ndodpeu E N Tiofx Aahof Power Consumption (max.): 6.3 kW Weight: 635 kg Refrigerant: R507 / R23 Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, please feel free to contact us by phone.

Tahun pembuatan: 2013, Kondisi: bekas, Silakan minta detail tambahan! Tersedia 2 unit. Ndsdpfox Nih Ajx Aahjf

Kondisi: hampir baru (bekas), Binder MK 720 E5 Climatic Chamber from 2025. Ex-demo chamber, virtually as new. Fully tested, fully functional, ready for operation. PRODUCT DESCRIPTION The BINDER MK series climatic chamber is designed for all types of heat and cold testing within a temperature range from -40°C to +180°C. For cyclic temperature tests, the MK chamber offers a cost-effective alternative to expensive customized solutions. KEY FEATURES Temperature range: -40°C to +180°C Ndjdpfx Ajx I A I Hsahef APT.line™ preheating chamber technology Programmable anti-condensation protection for samples Heated viewing window with internal LED lighting BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with optical and acoustic alarm Intuitive controller with touch screen featuring segment and real-time programming Internal data logger, measurement values in open format readable via USB 2 access ports with 80 mm silicone plugs, left and right Independent, adjustable Class 2 (DIN 12880) temperature safety device with optical alarm 4 castors, two with brakes Computer interface: Ethernet Ramp function capability Integrated chart recorder Real-time clock Heated door 1 stainless steel wire shelf Stainless steel interior Halogen-free refrigerant R-452A Cooling provided by compressor unit

Kondisi: sangat baik (bekas), Vötsch Type: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With a temperature change rate of 5 K/min Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation over time (center of working space): ±0.1 K to ±0.5 K Temperature deviation spatially: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for Climatic Testing: Temperature range: +10°C to +95°C Temperature deviation over time (center of working space): ±0.1 K to ±0.3 K Temperature deviation spatially: ±0.5 K to ±1.0 K Humidity deviation over time (center of working space): ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climate range: 2°C/95% r.h. controlled for max. 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side ports: 50 mm, 125 mm Operating Data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Fusing (site provided): 63 A slow-blow Refrigerants: R404A / R-23 Weight: approx. 570 kg Important Safety Information for Buyers! The following steps are carried out on each chamber we offer before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant Nedpfx Ajx Elt Hoahsdf 3. Leakage test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Specifications subject to change and errors excepted!) For further questions, we would be happy to assist you by phone.

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), - Tegangan: 400V. - Daya terpasang: 10,90 kW. - Rentang suhu: dari -25 hingga +100°C. - Rentang kelembapan: 20% hingga 98%. - Dimensi interior: 970 x 950 x 960 mm. Ndjdox Icz Hjpfx Aahef - 2 rak. - Berat: 900 kg. - Tahun pembuatan: 2010.

Tahun pembuatan: 1997, Kondisi: baik (bekas), Vötsch VTR 7033/S Temperature Test Chamber Ndedpfx Aeuuiv Isahof Manufacturer: Vötsch Model: VTR 7033/S Article No.: 60885637 Temperature Chamber Temperature range: -70°C to +180°C Mains voltage: 400V Rated current: 24A Rated power: 9.5 kW Refrigerant (medium temp.): R 404 A Refrigerant (low temp.): R 23 Year of manufacture: 1997 TK 08 You will find further items—new and used—in our shop! International shipping costs available upon request!

Tahun pembuatan: 2008, Kondisi: bekas, Ruang VP2000 (setara dengan model Pharma 2000) dilengkapi dengan pengendali Simpac. Nedpex Nihcefx Aahedf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Binder MKT 240 E5 climate chamber. Chamber from 2025 with only 66 operating hours. One-year warranty on spare parts PRODUCT DESCRIPTION Temperature ranges from -70°C to 180°C and natural simulation capabilities make the BINDER MKT series unique in its class. At the same time, this chamber meets the highest standards of precision and performance in cyclic temperature testing. KEY FEATURES Temperature range: -70°C to 180°C 4 voltage-free relay connectors Preheating chamber technology e™ Programmable anti-condensation protection for samples Heated inspection window with internal LED lighting Ndodpfxew U Rv Rj Aahjf BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with optical and acoustic alarm Intuitive touchscreen controller with segment and real-time programming Integrated data logger, measured values in open format accessible via USB Access port with 50 mm silicone plug, on the left side Independent, adjustable class 2 temperature limiter (DIN 12880) with optical alarm 4 castors, two with brakes Computer interface: Ethernet Ramp function setting capability Built-in chart recorder Real time clock Door heating Stainless steel wire shelf Stainless steel interior Halogen-free refrigerants R-452A and R-23 Cooling provided by cascade compressor refrigeration unit

Kondisi: sangat baik (bekas), Weiss Model: WKL 64/40 For sale is a professional Weiss climate test chamber. Air-cooled -40°C to +180°C With humidity range from 10% to 98% Chamber volume: 64 liters Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1780 mm, Width 760 mm, Depth 800 mm Temperature change rate: Cooling: 5.0 K/min Nodpjx Ek Uvofx Aahedf Heating: 3.5 K/min Temporal temperature fluctuation: ±0.3 K to ±1.0 K Temperature uniformity in chamber: ±0.5 K to ±2.0 K Max. heat compensation: 800 W Climatic testing: Max temperature: +95 °C Min temperature: +10 °C Dew point temperature range: 5.5 ... 93.5 °C Humidity range: 10 ... 95 % RH Humidity constancy, stabilized, depending on climate value: ±1 to ±3 % RH Temperature deviation, temporal, in steady state, depending on temperature: ±0.3 K to ±0.5 K Temperature uniformity in chamber, depending on setpoint: ±0.5 K to ±1.5 K Nominal power: 1.8 kW; Nominal current: 8.0 A Supply voltage: 1/N/PE AC 230V ±10%/50Hz Refrigerant: R-404A 0.8 kg Weight: 120 kg Important note: "The table shown in the photos is not included in the sale." For your security as the buyer, please note the following procedures on our offered chambers: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a trial run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and error!) For further questions, feel free to contact us by phone.

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), Vötsch VSKZ 04/120/S walk-in climate test chamber Manufacturer: Vötsch Model: VSKZ 04/120/S Temperature range: -40°C to +120°C Mains voltage: 400V Rated current: 95A Nominal power: 56 kW Refrigerant: R 404 A Year of manufacture: 1996 External dimensions: W 2850 x D 4100 x H 3080 mm Ndodpjuuigyofx Aahef SO-01 You will find more items – both new and used – in our shop! International shipping costs on request!

Kondisi: sangat baik (bekas), CTS Type: C-40/350 Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. The unit is designed for demanding environmental simulations in industrial applications and is ideal for materials testing, electronics, automotive, aerospace, and research. Temperature Tests: - Temperature range: -40°C to +180°C - Temporal temperature deviation: ≤ ±0.3 K - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temporal temperature deviation: ≤ 1.0 K - Temporal humidity deviation: ≤ +3.0% r.H. The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without heat compensation, and without additional equipment. Options may influence performance data. Technical Specifications: - Cooling system: air-cooled, low-noise, fully hermetic, seamless power adjustment via electronic monitoring and control system, eco-friendly refrigerant R404A - Test chamber: Floor load capacity 150 kg/m² - Shelf: Stainless steel, usable area 620 x 600 mm, max. load per shelf 35 kg, total load with maximum shelf configuration 100 kg Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input for setpoints - Error messages in plain text - RS 232 interface - Ethernet interface - Free control channels for external test specimen operation Dimensions: - Test chamber volume: 350 liters Ndjdpfjx Ekupsx Aahsf - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: - Power supply: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: --

Kondisi: sangat baik (bekas), Vötsch VC 0150 Climate Test Chamber 0°C - +90°C Manufacturer: Vötsch Model: VC 0150 Climate Test Chamber Voltage: 230 V Rated Power: 1.5 kW Volume: 1,540 liters Temperature Range: 0°C to +90°C Njdpfsuuikfox Aahedf Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor Controller List price: €19,500 KK-09 You can find more items – new and used – in our shop! International shipping costs upon request!

Kondisi: sangat baik (bekas), en-CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description This climate test chamber enables the testing of the function or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal climate transfer to the test object. The air handling unit is located at the rear of the interior space. The service modules are mounted in a separate frame behind the main unit, ensuring easy access. The control system is housed in its own control cabinet, with the operating panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air using a blower. Technical Performance Data: Temperature Tests: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured at supply air, with/without test load/thermal radiation): – Heating: 2 K/min from -40 °C to +85 °C – Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% RH • Dew point temperature range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 – ±3% RH over time *Technical data refers to ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without irradiation and without additional features. Dimensions: Internal dimensions (test room / usable volume): • Volume: approx. 5,500 liters (5.5 m³) • Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (actual dimensions may vary depending on configuration) External dimensions: • Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: • Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz • Nominal power consumption: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Version: • Refrigeration unit: water-cooled, quiet operation, semi-hermetic design • Infinitely variable power adjustment via electronic monitoring and control system • Eco-friendly refrigerants R 23 / R 404 A Ndodpox Eaxbofx Aahsf Notes • Viewing by appointment possible (46325 Borken) • Shipping via freight forwarder available – costs & logistics on request • Scope of delivery: (see photo) * Specifications are subject to change and errors excepted! We are happy to answer further questions by phone.

Kondisi: baik (bekas), Vötsch VCS 4100 climate test chamber -40 °C to +180 °C Manufacturer: Vötsch Model: VCS 4100 Temperature range: -40 °C to +180 °C Mains voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A KK-07 Ndedpjuuiygofx Aahef You will find more new and used items in our shop! International shipping costs on request!

Kondisi: sangat baik (bekas), en-CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description This climate test chamber enables the testing of the function or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal climate transfer to the test object. The air handling unit is located at the rear of the interior space. The service modules are mounted in a separate frame behind the main unit, ensuring easy access. The control system is housed in its own control cabinet, with the operating panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air using a blower. Technical Performance Data: Temperature Tests: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured at supply air, with/without test load/thermal radiation): – Heating: 2 K/min from -40 °C to +85 °C – Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% RH • Dew point temperature range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 – ±3% RH over time *Technical data refers to ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without irradiation and without additional features. Dimensions: Internal dimensions (test room / usable volume): • Volume: approx. 5,500 liters (5.5 m³) • Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (actual dimensions may vary depending on configuration) External dimensions: • Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: Ndodpfxox Eabpe Aahsf • Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz • Nominal power consumption: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Version: • Refrigeration unit: water-cooled, quiet operation, semi-hermetic design • Infinitely variable power adjustment via electronic monitoring and control system • Eco-friendly refrigerants R 23 / R 404 A Notes • Viewing by appointment possible (46325 Borken) • Shipping via freight forwarder available – costs & logistics on request • Scope of delivery: (see photo) * Specifications are subject to change and errors excepted! We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), en-CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description This climate test chamber enables the testing of the function or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal climate transfer to the test object. The air handling unit is located at the rear of the interior space. The service modules are mounted in a separate frame behind the main unit, ensuring easy access. The control system is housed in its own control cabinet, with the operating panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air using a blower. Technical Performance Data: Temperature Tests: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured at supply air, with/without test load/thermal radiation): – Heating: 2 K/min from -40 °C to +85 °C Nsdpox D Abpofx Aahsdf – Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% RH • Dew point temperature range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 – ±3% RH over time *Technical data refers to ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without irradiation and without additional features. Dimensions: Internal dimensions (test room / usable volume): • Volume: approx. 5,500 liters (5.5 m³) • Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (actual dimensions may vary depending on configuration) External dimensions: • Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: • Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz • Nominal power consumption: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Version: • Refrigeration unit: water-cooled, quiet operation, semi-hermetic design • Infinitely variable power adjustment via electronic monitoring and control system • Eco-friendly refrigerants R 23 / R 404 A Notes • Viewing by appointment possible (46325 Borken) • Shipping via freight forwarder available – costs & logistics on request • Scope of delivery: (see photo) * Specifications are subject to change and errors excepted! We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), CTS CTS CW‑60/11 – Water-cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber allows for the testing of the function or material properties of a test object under the influence of temperature and humidity. Efficient air circulation with a correspondingly high rate of recirculated air ensures effective thermal transfer to the test specimen. The air handling compartment is located at the rear of the chamber. The machinery units are installed behind the device in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Specifications: Ndjdpfsx Ankyjx Aahef Temperature Testing: Temperature range: –60 °C to +90 °C Temperature deviation (temporal): ±0.5 to 1 K Temperature deviation (spatial): ±1 K at 200 mm from the wall Rate of temperature change (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% relative humidity Dew point range: +5 °C to +89 °C Temperature deviation (temporal): ±0.5 K Humidity deviation (temporal): ±2 – ±5% r.h. No radiant heat applied In stable operating condition Technical data is based on an ambient temperature of +25 °C, rated voltage 400V, without a test load, without irradiation, and without additional equipment. Dimensions: Internal dimensions (test space / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2100 mm Depth: 2530 mm Height: 2200 mm (Dimensions may vary slightly depending on configuration) External dimensions: Width: 2700 mm Depth: 5200 mm Height: 2520 mm (may vary depending on door, frame, accessories, etc.) Operating Data: Rated power: 84.4 kW Rated voltage: 400 V 3/N 50 Hz Rated current: 131.4 A Technical Design: Refrigeration unit: Water-cooled, low noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes Inspection by appointment (46325 Borken) Shipping by freight forwarder possible – costs & arrangements on request Scope of delivery: (see picture) (Subject to modifications and errors in technical data, all details without obligation!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS CTS CW‑60/11 – Climate Test Chamber, Water-Cooled The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in / drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: The climate test chamber enables the testing of the function and material properties of specimens under the influence of both temperature and humidity. Optimized air circulation with a high recirculation air volume ensures excellent transfer to the specimens. The air conditioning compartment is located at the rear of the inner space. All main assemblies are housed in a separate frame behind the device for easy access. Control electronics are installed in a dedicated control cabinet; the operating panel is mounted directly into the cabinet door. For chamber dehumidification, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be introduced into the test chamber via a blower. Technical Performance Data: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Temperature change rate (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Ndodpfex Anipsx Aahef Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % rH (Performance data applies without radiant heat input, in stabilized operation, at ambient temp. +25 °C, rated voltage 400 V, without specimens, no additional accessories.) Dimensions: - Interior (test / usable chamber): - Volume approx. 11,000 liters (11 m³) - Interior dimensions (approx.): Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary with configuration) - Exterior dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (may vary depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical configuration: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless power control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A - Weight: 6,000 kg Notes: - Inspections can be arranged by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements on request - Scope of delivery: (see picture) - (Specifications subject to change. Technical details are not binding.) - Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Weiss Type: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Model Series WK3-../0 with SIMPAC* control system Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulbs 2 x 24 V, 50 W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Main fuse required: 16 A slow-blow Protection class (control cabinet and operating unit): IP 54 Maximum heat output to ambient: 1200 W Sound pressure level (measured 1m from the front at 1.6m height): 46 dB(A) Data for temperature testing: Temperature range: -5°C to +90°C Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climate testing: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98% r.h. Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temporal humidity deviation: +1 to +3 % r.h. Nedsx Ag R Sspfx Aahjdf Refrigerant: R-404A Weight: 610 kg Important safety information for you as the buyer! The following measures are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New, legally compliant refrigerant refill 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of supply: (see image) (Technical data subject to change and error!) We are happy to answer further questions by phone.