Beli Iklim Celje bekas (220)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de-to-hu Gedpohu Aw Hofx Adtstt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tinggi total: 2.100 mm, panjang total: 650 mm, lebar total: 750 mm, kebutuhan tinggi: 2.100 mm, persyaratan ruang panjang: 650 mm, lebar yang dibutuhkan: 750 mm, Lemari pendingin krim Gram SKS 64 Model Gram: SKS 64 CCG Konstruksi stainless steel Untuk nampan 600 x 400 mm Tampilan suhu digital dari -5 hingga 12°C Siap digunakan Pendingin dengan sirkulasi udara Koneksi: 230V Perangkat bekas, kondisi seperti baru Dengan garansi Kualitas dari bengkel profesional! Manfaatkan pengalaman lebih dari 35 tahun! Opsi: Kontrak perawatan Paket layanan Kotak suku cadang untuk keamanan lebih Godpfxexmra He Adtett Layanan pengiriman Pelatihan & commissioning Kunjungi ruang pameran besar kami!

Kondisi: bekas, Diese Anzeige bezieht sich auf den LABCOLD RLDF1520 Klimaklasse 4 Kühlschrank. Das Gerät befindet sich in einwandfreiem Zustand und ist sofort einsatzbereit. Gsdpfx Adoxhdthetett Der LABCOLD RLDF1510 ist ein apotheken- bzw. impfstoffgeeigneter Kühlschrank, ausgelegt zur Lagerung temperatursensibler Arzneimittel, Impfstoffe oder biologischer Materialien. Wesentliche technische Daten und Merkmale: Merkmal Spezifikation / Detail Kapazität: ca. 430 Liter Außenmaße (H × B × T): 1860 mm × 600 mm × 700 mm Temperatur-Arbeitsbereich: +2 °C bis +8 °C (nominaler Betrieb ~5 °C) Steuerung/Überwachung: „IntelliCold™“-Regler, 24/7 Temperaturaufzeichnung, Alarme (Über-/Unterschreitung, Tür offen, Stromausfall) Isolierung/Konstruktion: Gehäuse aus emailliertem Stahl, innen korrosionsgeschütztes, lackiertes Aluminium; Umluftkühlung mit Lüfter; automatische Abtauung im Aus-Zyklus Türtyp: massive Tür (keine Glastür) Weitere Merkmale: Türschloss mit Schlüsseln, Zugang für Temperatursensor, Fernalarm-Kontakte, Datenspeicherung (13 Monate) Stromverbrauch: typischerweise ca. 5,52 kWh/24h (bezogen auf ein 440L-Modell/ähnliches Modell) Zusammenfassend handelt es sich um einen robusten, nach Vorschrift gefertigten Kühlschrank für den Einsatz in der Kühlkette (d. h. zur Aufbewahrung von Medikamenten, Impfstoffen und biologischen Produkten) und nicht für den allgemeinen Haushalts- oder Lebensmittelgebrauch.

Tahun pembuatan: 2013, Kondisi: bekas, Silakan minta detail tambahan! Tersedia 2 unit. Gtodsx Nih Ajpfx Adtjt

Kondisi: sangat baik (bekas), Vötsch Type: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With a temperature change rate of 5 K/min Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation over time (center of working space): ±0.1 K to ±0.5 K Temperature deviation spatially: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for Climatic Testing: Temperature range: +10°C to +95°C Temperature deviation over time (center of working space): ±0.1 K to ±0.3 K Temperature deviation spatially: ±0.5 K to ±1.0 K Humidity deviation over time (center of working space): ±1% to ±3% r.h. Gedox Elt Hepfx Adtett Humidity range: 10% to 98% r.h. (Extended climate range: 2°C/95% r.h. controlled for max. 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side ports: 50 mm, 125 mm Operating Data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Fusing (site provided): 63 A slow-blow Refrigerants: R404A / R-23 Weight: approx. 570 kg Important Safety Information for Buyers! The following steps are carried out on each chamber we offer before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leakage test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Specifications subject to change and errors excepted!) For further questions, we would be happy to assist you by phone.

Kondisi: hampir baru (bekas), Binder MK 720 E5 Climatic Chamber from 2025. Ex-demo chamber, virtually as new. Fully tested, fully functional, ready for operation. PRODUCT DESCRIPTION The BINDER MK series climatic chamber is designed for all types of heat and cold testing within a temperature range from -40°C to +180°C. For cyclic temperature tests, the MK chamber offers a cost-effective alternative to expensive customized solutions. KEY FEATURES Temperature range: -40°C to +180°C APT.line™ preheating chamber technology Programmable anti-condensation protection for samples Heated viewing window with internal LED lighting BINDER Multi Management Software APT-COM™ Basic Edition Gjdpfxjx I A I He Adtott Diagnostic system with optical and acoustic alarm Intuitive controller with touch screen featuring segment and real-time programming Internal data logger, measurement values in open format readable via USB 2 access ports with 80 mm silicone plugs, left and right Independent, adjustable Class 2 (DIN 12880) temperature safety device with optical alarm 4 castors, two with brakes Computer interface: Ethernet Ramp function capability Integrated chart recorder Real-time clock Heated door 1 stainless steel wire shelf Stainless steel interior Halogen-free refrigerant R-452A Cooling provided by compressor unit

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), - Tegangan: 400V. - Daya terpasang: 10,90 kW. Gtedpfox Icz Hex Adtot - Rentang suhu: dari -25 hingga +100°C. - Rentang kelembapan: 20% hingga 98%. - Dimensi interior: 970 x 950 x 960 mm. - 2 rak. - Berat: 900 kg. - Tahun pembuatan: 2010.

Tahun pembuatan: 2008, Kondisi: bekas, Ruang VP2000 (setara dengan model Pharma 2000) dilengkapi dengan pengendali Simpac. Gtjdsx Nihcepfx Adtjt

Kondisi: sangat baik (bekas), CTS Type: C-40/350 Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. The unit is designed for demanding environmental simulations in industrial applications and is ideal for materials testing, electronics, automotive, aerospace, and research. Temperature Tests: - Temperature range: -40°C to +180°C - Temporal temperature deviation: ≤ ±0.3 K - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Gjdjx Ekupjpfx Adtott Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temporal temperature deviation: ≤ 1.0 K - Temporal humidity deviation: ≤ +3.0% r.H. The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without heat compensation, and without additional equipment. Options may influence performance data. Technical Specifications: - Cooling system: air-cooled, low-noise, fully hermetic, seamless power adjustment via electronic monitoring and control system, eco-friendly refrigerant R404A - Test chamber: Floor load capacity 150 kg/m² - Shelf: Stainless steel, usable area 620 x 600 mm, max. load per shelf 35 kg, total load with maximum shelf configuration 100 kg Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input for setpoints - Error messages in plain text - RS 232 interface - Ethernet interface - Free control channels for external test specimen operation Dimensions: - Test chamber volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: - Power supply: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: --

Kondisi: sangat baik (bekas), en-CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description This climate test chamber enables the testing of the function or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal climate transfer to the test object. The air handling unit is located at the rear of the interior space. The service modules are mounted in a separate frame behind the main unit, ensuring easy access. The control system is housed in its own control cabinet, with the operating panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air using a blower. Technical Performance Data: Temperature Tests: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured at supply air, with/without test load/thermal radiation): – Heating: 2 K/min from -40 °C to +85 °C – Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: • Temperature range: +10 °C to +90 °C Gtedox Eaxbopfx Adtjt • Humidity range: 10% to 95% RH • Dew point temperature range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 – ±3% RH over time *Technical data refers to ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without irradiation and without additional features. Dimensions: Internal dimensions (test room / usable volume): • Volume: approx. 5,500 liters (5.5 m³) • Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (actual dimensions may vary depending on configuration) External dimensions: • Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: • Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz • Nominal power consumption: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Version: • Refrigeration unit: water-cooled, quiet operation, semi-hermetic design • Infinitely variable power adjustment via electronic monitoring and control system • Eco-friendly refrigerants R 23 / R 404 A Notes • Viewing by appointment possible (46325 Borken) • Shipping via freight forwarder available – costs & logistics on request • Scope of delivery: (see photo) * Specifications are subject to change and errors excepted! We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), en-CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description This climate test chamber enables the testing of the function or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal climate transfer to the test object. The air handling unit is located at the rear of the interior space. The service modules are mounted in a separate frame behind the main unit, ensuring easy access. The control system is housed in its own control cabinet, with the operating panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air using a blower. Technical Performance Data: Temperature Tests: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured at supply air, with/without test load/thermal radiation): – Heating: 2 K/min from -40 °C to +85 °C – Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% RH • Dew point temperature range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 – ±3% RH over time *Technical data refers to ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without irradiation and without additional features. Dimensions: Internal dimensions (test room / usable volume): • Volume: approx. 5,500 liters (5.5 m³) • Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (actual dimensions may vary depending on configuration) External dimensions: • Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: • Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz • Nominal power consumption: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Version: • Refrigeration unit: water-cooled, quiet operation, semi-hermetic design • Infinitely variable power adjustment via electronic monitoring and control system Gedpfox Eabpox Adtjtt • Eco-friendly refrigerants R 23 / R 404 A Notes • Viewing by appointment possible (46325 Borken) • Shipping via freight forwarder available – costs & logistics on request • Scope of delivery: (see photo) * Specifications are subject to change and errors excepted! We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), en-CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description This climate test chamber enables the testing of the function or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal climate transfer to the test object. The air handling unit is located at the rear of the interior space. The service modules are mounted in a separate frame behind the main unit, ensuring easy access. The control system is housed in its own control cabinet, with the operating panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air using a blower. Technical Performance Data: Temperature Tests: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured at supply air, with/without test load/thermal radiation): – Heating: 2 K/min from -40 °C to +85 °C – Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% RH • Dew point temperature range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 – ±3% RH over time *Technical data refers to ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without irradiation and without additional features. Dimensions: Internal dimensions (test room / usable volume): • Volume: approx. 5,500 liters (5.5 m³) • Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (actual dimensions may vary depending on configuration) External dimensions: • Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: • Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz • Nominal power consumption: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Version: • Refrigeration unit: water-cooled, quiet operation, semi-hermetic design • Infinitely variable power adjustment via electronic monitoring and control system • Eco-friendly refrigerants R 23 / R 404 A Gedpfxsx D Abpo Adtjtt Notes • Viewing by appointment possible (46325 Borken) • Shipping via freight forwarder available – costs & logistics on request • Scope of delivery: (see photo) * Specifications are subject to change and errors excepted! We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), CTS CTS CW‑60/11 – Climate Test Chamber, Water-Cooled The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in / drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: The climate test chamber enables the testing of the function and material properties of specimens under the influence of both temperature and humidity. Optimized air circulation with a high recirculation air volume ensures excellent transfer to the specimens. The air conditioning compartment is located at the rear of the inner space. All main assemblies are housed in a separate frame behind the device for easy access. Control electronics are installed in a dedicated control cabinet; the operating panel is mounted directly into the cabinet door. Gtodpfxjx Anipj Adtet For chamber dehumidification, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be introduced into the test chamber via a blower. Technical Performance Data: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Temperature change rate (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % rH (Performance data applies without radiant heat input, in stabilized operation, at ambient temp. +25 °C, rated voltage 400 V, without specimens, no additional accessories.) Dimensions: - Interior (test / usable chamber): - Volume approx. 11,000 liters (11 m³) - Interior dimensions (approx.): Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary with configuration) - Exterior dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (may vary depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical configuration: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless power control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A - Weight: 6,000 kg Notes: - Inspections can be arranged by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements on request - Scope of delivery: (see picture) - (Specifications subject to change. Technical details are not binding.) - Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Weiss Type: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Model Series WK3-../0 with SIMPAC* control system Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulbs 2 x 24 V, 50 W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Main fuse required: 16 A slow-blow Protection class (control cabinet and operating unit): IP 54 Maximum heat output to ambient: 1200 W Sound pressure level (measured 1m from the front at 1.6m height): 46 dB(A) Data for temperature testing: Temperature range: -5°C to +90°C Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climate testing: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98% r.h. Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg Important safety information for you as the buyer! The following measures are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New, legally compliant refrigerant refill 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of supply: (see image) (Technical data subject to change and error!) Gsdox Ag R Sjpfx Adtjtt We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), en-GB Gtjdpfxetr Dinj Adtst

Kondisi: baik (bekas), TIRA Model: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260 mm x 3850 mm x 2780 mm Test chamber (W x D x H): approx. 2254 mm x 2645 mm x 2251 mm Door opening (W x H): approx. 2251 mm x 2254 mm Gtedpfx Aeuvipwsdtot Condition: Used Scope of delivery: (See picture) (Subject to technical modifications and errors. All information without guarantee!) For further questions, feel free to contact us by phone.

Kondisi: baik (bekas), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical Data - Climatic Chamber: Temperature range: -40 to +120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15 to approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone. Gjdjuvi R Aspfx Adtott

Kondisi: sangat baik (bekas), Weiss Model: SC/KWT 450 Salt Spray Chamber Gedpew Hz Trjfx Adtott Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine tank capacity: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Application areas: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW, Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilated): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change. Errors and omissions excepted!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), en_TIRA_Type_TCC_7120_Temperature_range_-75C__180C_Air-cooled_co ndenser_Temperature_stability_temporally_and_at_the_center_of_the _test_chamber_0.1C__0.3C_Maximum_temperature_change_rate_Heating_ 4C_per_min_Cooling_3C_per_min_Humidity_range_10__to_98__relative_ humidity_Humidity_stability_temporally_1__to_3__Dew_point_range_f or_long-term_tests_2C_to_94C_Dew_point_range_for_short-term_tests _-20C_to_2C_External_dimensions_LxWxH_1320_x_2235_x_2137_mm_Test_ chamber_dimensions_LxWxH_1000_x_1130_x_1020_mm_Test_chamber_volum e_approx._1152_liters_Max._load_per_shelf_50_kg_Max._floor_load_i n_test_chamber_100_kg_Refrigerants_R404A_and_R23_Power_supply_400 V_+6_-10__50Hz_3P_N_PE_Nominal_power_10.2_max._17.5_kW_Nominal_cu rrent_19.5_max._32.0_A_Noise_level_approx._80_dBA_Weight_1180_kg_ For_your_safety_as_buyer_please_note_the_following_The_following_ services_are_performed_in_advance_on_the_chambers_we_offer_1._Fun ction_check_and_replacement_of_necessary_components_2._If_necessa ry_recharge_with_legally_compliant_refrigerant_3._Leak_test_with_ certificate_4._After_successful_inspection_the_chambers_are_subje cted_to_a_documented_test_run_Condition_used_Scope_of_delivery_Se e_picture_Specifications_subject_to_change_and_errors_Please_feel _free_to_call_us_with_further_questions_ Gtjdpfewfddwjx Adtjt

Kondisi: sangat baik (bekas), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity Control (Air-Cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Overall Dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C time deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Testing: Temperature range: -70°C to +180°C Temperature deviation in steady-state, according to IEC 60068-3-5 dependent on test chamber temperature time deviation: ±0.1 to ±0.3 K spatial deviation: ±0.5 to ±1 K Humidity range: 10% to 98% RH Electrical Connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Fuse protection: 16 A slow-blow, provided by customer Refrigerants: R-404A/R23 Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components Gedoxfh Spopfx Adtjtt 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Climate Test Chamber We are offering you a Heraeus Vötsch climate test chamber. Model: VC³ 0100 Gtjdpfen Ard Ssx Adtot Test chamber dimensions (H x W x D): approx. 950 x 1100 x 950 mm TEMPERATURE TESTING: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate (cooling): 0.2 K/min Temperature change rate (heating): 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Heat compensation at +20°C: 350 W CLIMATE TESTING: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% r.h. Temporal humidity deviation: ± 1 to ± 3% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.6 kW Rated current: 12 A Refrigerant: R 404A Weight: approx. 1400 kg For your security as the buyer, please note the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Type: VC³ 0100 / Year of manufacture: 2013 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Heraeus Vötsch Climate Test Chamber We are offering a Heraeus Vötsch Climate Test Chamber. Heraeus Vötsch climate chamber with humidity control (water-cooled) Test chamber internal dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Godomt Du Topfx Adtstt External dimensions: Width 1090 mm x Depth 1960 mm x Height 1995 mm Specification for temperature tests: Temperature range: -45°C to +180°C time deviation ± 0.1 to ± 0.5 K spatial deviation ± 0.5 to ± 1.5 K Rate of temperature change according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climate tests: Temperature range: -45°C to +180°C Temperature deviation in steady-state, per IEC 60068-3-5 depending on test chamber temperature Temperature range: -10°C to +95°C time deviation ± 0.1 to ± 0.3 K spatial deviation ± 0.5 to ± 1.0 K Humidity range: 10% to 98% RH Temporal humidity deviation: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Test chamber volume: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For your safety as a buyer, please note the following information! The following procedures are carried out on the chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are run through a test cycle, which is monitored using calibrated equipment. Condition: used Scope of delivery: (See picture) (Technical details are subject to change and errors excepted!) If you have any further questions, please contact us by phone.

Kondisi: sangat baik (bekas), Here we offer a walk-in climate chamber. Godpfx Aeqw U Aasdtett Manufacturer: RS Simulators, water-cooled The chamber can be disassembled into 3 parts for transport (bolted) Temperature range: -30°C to +100°C Refrigerants: 20kg R-404A + 20kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test chamber dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68kW rated power Voltage: 3x400V/PE Current: 135A Type: KKM 40 / 45 S Further technical data will follow! For your security as a buyer, please note the following information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant in compliance with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see images) (Specifications and technical data are subject to change and errors excepted!) We will be happy to answer further questions by phone.

Kondisi: baik (bekas), Vötsch Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance Data for Temperature Testing: Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climate Testing: Temperature range: +10°C to +95°C Gtjdpfx Aeuudx Dedtjt Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3°C to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber internal dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Power supply: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further inquiries, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Type: WK3-340/70 Weiss Climate Test Chamber, Water-Cooled Control Panel: "Touch Panel" All control and operation commands can be executed by simply touching the function icons on the "Touch Panel" control interface. Leveling Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine unit, the climate test chamber is equipped with adjustable feet. Access Ports The test chamber is fitted with access ports on both the left and right sides, enabling the introduction of measuring cables and test devices into the test space. Gtodjxmg Sdspfx Adtjt Access ports included as standard equipment: R1: Nominal width 125 mm L1: Nominal width 85 mm Chamber volume: 335 liters Test chamber interior dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Data for temperature tests: Minimum temperature: –72°C Maximum temperature: +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operating data: Test chamber lighting: Halogen, 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuses (to be provided on-site): 16 A slow-blow Refrigerants: R-452A / R23 Weight: Approx. 585 kg Important information for your safety as a buyer! The following checks are performed on our offered chambers prior to sale: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (see picture) (Specifications and data subject to change and errors excepted!) Should you have any further questions, we are happy to assist you by phone.