Beli Final Concept 350 bekas (13.634)

Kondisi: baru, Tahun pembuatan: 2025, Description: IE3 motor as standard Maximum air flow up to 8,500 m³/h at the fan Approx. 73 m² filter area, residual dust content according to H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already complies with prEN 16770 Optional: models with type-tested rotary valve (FSA) Certified backflow damper Integrated automatic extinguishing system Inlet diameter: 350 mm Nominal motor power: 11 kW Voltage: 400 V / 50 Hz Max. air flow: 8,500 m³/h Rated air flow: 6,927 m³/h Negative pressure at Qnenn: 2,765 Pa Filter area: 73 m² Chip collection volume (net/gross): 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3,112 x 1,058 x 2,351 mm Hfodjcqy I Sspfx Adqsn Weight: 1,074 kg Location: in stock, 54634 Bitburg

Tahun pembuatan: 2025, Kondisi: baru, new machine Hfsdpfjw Nafkox Adqjn year of manufacture: 2025 features and technical specifications: complete in standard version with: - sturdy, torsion-resistant frame made of steel, welded and bolted construction - upper slat press beam with 6 elements, lateral slat press beam with 5 elements - slat press beams with field-proven tolerance compensation (Ganner system) for tightly compressed carcass joints - counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick coated bearing plates - continuous pressing surface with a height of 95 mm at the lower vertical press beam - electric motor adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance carriage nuts with grease reservoir - pressing is performed electromechanically via 2 separate worm gear motors (2 x 0.75 kW) - the pressing force of the press beams is infinitely electronically adjustable by 2 potentiometers and controlled via frequency inverters, making the pressing force control completely wear-free - pressing force for horizontal press beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - pressing force for vertical press beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - pressing and adjustment speed of the press beams with fine positioning, via 3-step selector switch 5 / 10 / 25 mm/sec - inching operation for precise positioning of both press beams, e.g. for low pressing forces, drawers, and carcasses at 45° - very simple operation via 6 separate pushbuttons, 8 movement sequences selectable via control system - freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - post-press function to increase or reduce the pressing force during the pressing process - working height/feeding height: 300 mm - working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm including extra charge for rapid traverse speed for quick positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special parts including set of machine feet for 500 mm working height location: flörsheim availability: short notice

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 150 kg, diameter meja: 300 mm, Tanpa harga minimal – dijual pasti kepada penawar tertinggi! Batas waktu pembayaran mesin adalah 20.11.2025! Penawaran bersifat mengikat dan mewajibkan pengambilan tepat waktu antara 01.12.2025 dan 05.12.2025! DETAIL TEKNIS Diameter alas: 300 mm DETAIL MESIN Dimensi & Berat Dimensi: 1.000 x 900 x 800 mm Berat: 150 kg PERLENGKAPAN Perangkat keras yang sesuai Hfjdpfx Adoxm U D Ieqen

Kondisi: bekas, jarak tempuh: 141.052 km, daya: 95 kW (129,16 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 4x2, jarak roda: 3.950 mm, pendaftaran pertama: 06/2022, panjang ruang muatan: 4.220 mm, lebar ruang muat: 2.110 mm, tinggi ruang muatan: 2.350 mm, kelas emisi: Euro 6, warna: putih, kabin pengemudi: kabin harian, suspensi: lain, ukuran ban: 235/65R16, jumlah tempat duduk: 3, Tahun pembuatan: 2022, Perlengkapan: ABS, kendali jelajah, kontrol traksi,

Kondisi: bekas, Empty weight: 4,200 kg Dimensions (L x W x H): 190 x 390 x 180 cm - Number of spindles [pcs.]: 4 - Spindle 1: - Motor power [kW]: 7.5 - Spindle diameter [mm]: 50 - Spindle 2: - Motor power [kW]: 7.5 - Spindle diameter [mm]: 50 - Spindle 3: - Motor power [kW]: 15 - Spindle diameter [mm]: 50 - Spindle 4: - Motor power [kW]: 15 - Spindle diameter [mm]: 50 - Max. planing width [mm]: 240 - Max. planing height [mm]: 85 - Infeed table length [mm]: 1440 - Feed motor [kW]: 5.5 - Extraction nozzle diameter [mm]: 150 - Documentation available: No - CE marking present: Yes - Serial number: 90-58-07 - Transport dimensions: 1900 mm x 3900 mm x 1800 mm (L x W x H) - Transport weight [kg]: 4200 kg - Transport packages [pcs.]: 1 Financial information VAT: The stated price is plus VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Hfsdpfx Adownh U Ejqsn Yorick Diebels

Kondisi: baik (bekas), Tahun pembuatan: 2004, Several units industrial gas burner Oilon GP-80 H + GasMultiBloc Dungs MB ZRDLE 420 B01 S20 + DUNGS FRS 520 OILON GP-80 H Capacity: 350-1000 kW Year of manufacture: 2005 Voltage: 230/400V 2kW 50Hz IP20 Control unit: LFL1.322 Gas pressure: min. 20 mbar / max. 360 mbar Weight: 62 kg Monoblock burner, aluminium cast housing Electronic control panel with signal diagram displaying the various combustion phases and alarms, allowing for continuous monitoring and correct burner operation Flame sensor type: QRA2 Control relay software: LFL1.322 Gas train with suitable adapter, mounted on the burner side Adjustable burner flanges Air damper actuator Quick connector for mains cable Automatic closure of air supply when the burner is off Seat and gas safety valves Gas pressure regulator included Differential air pressure switch Minimum gas pressure controller Hjdpocvkalofx Adqefn Complete electrical control system.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm Hjdow Td A Iopfx Adqefn - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), A demonstration double-mitre cold circular saw for metal with a 350mm circular saw blade. Cutting capacity: Round/Rectangle 90°: 120 mm / 140 x 100 mm Round/Rectangle 45° right and left: 100 mm / 100 x 100 mm Cutting speed: 18 / 36 m/min For further technical data, see PDF document. Technical data and dimensions subject to change/errors. Hfjdjpgmngepfx Adqjn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3500322132F, panjang mata gergaji pita: 4.520 mm, lebar pita gergaji: 34 mm, kecepatan pita gergaji: 1.666 mm/dtk, berat kosong: 1.200 kg, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! Hjdpfexm Rkqsx Adqjfn Batas waktu pembayaran untuk mesin adalah 20.11.2025! Penawaran mengikat untuk pengambilan tepat waktu antara 01.12.2025 dan 05.12.2025! RINCIAN TEKNIS Panjang pisau gergaji pita: 4.520 mm Lebar pisau gergaji pita: 34 mm Tinggi pisau gergaji pita: 1,1 mm Kecepatan pisau gergaji pita: 20 m/menit – 100 m/menit RINCIAN MESIN Panjang conveyor roller: 2.000 mm Lebar conveyor roller: 450 mm Dimensi & berat Dimensi (P x L x T): 2.500 x 2.000 x 1.800 mm Berat kosong: 1.200 kg PERLENGKAPAN Conveyor roller

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Clamping force: 50 tons Hfedewmqx Rjpfx Adqon Plate size: 455 x 455 mm Tie bar spacing: 320 x 320 mm Maximum daylight opening: 575 mm

Kondisi: baik (bekas), Tahun pembuatan: 1990, Reference no.: 10301 Manufacturer: TITAN Model: RU 350 x 1-1500 Hedpfx Adsxmd Rwoqefn Year of manufacture: 1990 Control system: Conventional Location: Halberstadt Country of origin: USA Max. grinding length: 1,500 mm Max. workpiece weight: 300 kg Grinding diameter: 350 mm Grinding wheel diameter max.: 280-500 mm Grinding wheel width: 80-100 mm

Kondisi: bekas, Brand: SOCO Model: MC-350 Hfjdpfsgtmi Usx Adqen Suitable e.g. for cutting aluminium, brass, copper, PVC, and carbon Cutting capacity for tubes at 90°: 101.6 mm Profile cutting capacity at 90 degrees: 76.2 x 127 mm Saw blade dimensions: 355.6 mm automatic feed length: 685.8 mm Notes: 2 shortest cut length (automatic): 1/4” (6.35 mm) Saw motor: 5 HP, 1750 rpm Voltage: 220/3/60

Kondisi: baru, Tahun pembuatan: 2025, Rojek Panel Saw PF 350 Industrial Version The machine design includes many technical innovations that enhance the practical utility of this machine. Its high-quality workmanship makes this panel saw one of the best in its class. The machine is equipped as standard with the CV 360T aluminium sliding table, featuring very precise and sturdy mounting on hardened bars. Optionally, the machine can be upgraded with the CV 400T aluminium sliding table, which is an extremely rigid multi-chamber construction, precise and robustly attached with steel bars. Aluminium sliding table dimensions: 400 x 3200mm. Precision and reliability are ensured by the solid pivot segment guide of the saw mechanism housed in the heavy cast iron body and the scorer unit with a separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7.5 kW/3×400 V Hfsdpfx Adon D Arhoqjn Motor speed 2,870 rpm Max. saw blade diameter with scorer Ø 350 mm Spindle diameter 30 mm (1") Saw blade spindle speed 4,450 rpm Max. cutting height 120 mm (83 mm at 45°) Saw blade tilting 0° ÷ 45° Max. cutting width 1,300 mm Scorer Scorer unit motor power 0.75 kW (1 kW) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed 8,530 rpm Machine Dimensions Length 3,355 mm Width 3,450 mm Table height 892 mm Max. machine height 1,460 mm Table size 1,185 x 500 mm Extraction port diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminium Sliding Table CV360T Table size 3,200 x 360 mm Support frame size 1,240 x 650 mm Cutting length 3,200 mm Power supply protection 16 A (25 A) Noise level (without technology) 81.8 dB(A) Noise level (with technology) 85.3 dB(A) Location: Ex-stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, lebar meja: 1.000 mm, panjang meja: 900 mm, gaya penekanan: 350 t, panjang langkah: 270 mm, Perlengkapan: penghadang cahaya keselamatan, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch & Brake System • T-Slotted Extension Plate • 8-Guided Slide/Ram • Adjustable Stroke on Single Connecting Rod Arm • Balancer Piston on Slide • Fully Automatic Fine Lubrication System • PLC Control System • Piano-Type Control Panel • Touchscreen LCD Display • Motor Reverse Operation • Hydraulic Overload Safety Device • Motorized Slide Adjustment Mechanism • Light Curtain (Photoelectric Safety Guard) • Enclosed Gear Group in Oil Reservoir • Double-Coil Safety Valve • CE Conformity • Production Range: C-Type Eccentric Press from 10 to 300 tons; • Production Range: D-Type Eccentric Press from 60 to 300 tons; • Production Range: H-Type from 150 to 2000 tons; • Country of Origin: Turkey • Warranty Period: 24 months • Delivery Time: Ex-stock TECHNICAL SPECIFICATIONS: CAPACITY: 350 TABLE (LOWER) USABLE AREA: 1000x900 mm TABLE (UPPER) USABLE AREA: 1000x900 mm FIXED STROKE LENGTH: 270 mm RATED TONNAGE: 9 mm STROKES PER MINUTE (SPM): 30-45 MAX. CLOSED DIE HEIGHT: 500 mm MIN. CLOSED DIE HEIGHT: 380 mm SIDE WINDOW DIMENSIONS: 600x800 mm SLIDE ADJUSTMENT (RAM ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 1 piece Hodpfx Aoxnmdpjdqjfn NUMBER OF ECCENTRIC SHAFTS (CRANKS): 1 piece SAFETY CLUTCH: Hydraulic PANEL INTERNAL SWITCHGEAR: European – Domestic LUBRICATION SYSTEM: Automatic SCREEN – PLC – INVERTER: DELTA - PILZ SAFETY BARRIER: REER WORKING SYSTEM: 4-position DIE MEMORY: 99 sets INSTALLATION TYPE: Floor-mounted BODY TYPE: Monoblock MOTOR POWER: 37 kW MOTOR SPEED (RPM): 1450 APPROX. MACHINE DIMENSIONS (L x W x H): 5000 x 2000 x 2000 mm APPROX. WEIGHT: 30 – 35 tons

Kondisi: baik (bekas), Tahun pembuatan: 1997, Aluminium cross-cut saw, aluminium circular saw, semi-automatic aluminium circular saw, mitre saw, glass bead saw, metal cross-cut saw, cross-cut and mitre saw, aluminium-metal circular saw, light metal circular saw Manufacturer: Berg Schmidt, Alu-metal circular saw Velox 350 24V with heavy-duty base frame Saw blade: Ø 350 mm, 1800/3600 rpm Double mitre: 45° Hfjdpfsn D Urpjx Adqon Cutting capacity - round 90°/45°: Ø 120 | 115 mm Cutting capacity - rectangular 90°/45°: 200x88 | 150x80 mm Drive: 1.5/1.8 kW Double clamping device: manual operation Dimensions: 900/585/H1850 mm Weight: 194 kg

Kondisi: baik (bekas), jarak tempuh: 154.303 km, daya: 95 kW (129,16 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 4x2, jarak roda: 3.950 mm, pendaftaran pertama: 03/2022, panjang ruang muatan: 4.430 mm, lebar ruang muat: 2.140 mm, tinggi ruang muatan: 2.360 mm, kelas emisi: Euro 6, warna: putih, kabin pengemudi: kabin harian, suspensi: lain, ukuran ban: 235/65R16, jumlah tempat duduk: 3, Tahun pembuatan: 2022, Perlengkapan: ABS, kendali jelajah, kontrol traksi, pendingin udara,

Kondisi: bekas, jarak tempuh: 644.577 km, daya: 300 kW (407,89 hp), pendaftaran pertama: 07/2010, jenis bahan bakar: diesel, jumlah tempat duduk: 52, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, warna: putih, rem: retarder, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Steuereinheit Schnittstelle: HSK 63 Hersteller: OKUMA Modell: OSP-100L Hauptantrieb Anzahl Achsen: 5 Werkzeuge Anzahl Werkzeugplätze: 40 Maximale Werkzeuglänge: 1500 mm Zusätzliche Ausstattung Automatiktür Dieses 5-Achsen-Okuma MacTurn 350 Dreh-Fräszentrum wurde 2003 gebaut. Es verfügt über ein HSK 63 Werkzeugaufnahmesystem und kann bis zu 40 Werkzeuge aufnehmen. Die Maschine ist mit einer Automatiktür ausgestattet und ermöglicht eine Bearbeitungslänge von 1500 mm. Nutzen Sie die Gelegenheit, diese Okuma MacTurn 350 Dreh-Fräszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche Drehen Hfjdpfxexl H Hre Adqen

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-1 Hfsdpfx Ajb Eln Dsdqjn

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), DE20240613A1 Hfedoxl H Amopfx Adqon

Kondisi: baru, Tahun pembuatan: 2025, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Hedsw Sgnkepfx Adqjfn Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Tahun pembuatan: 2000, jam operasional: 111.000 h, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 16.000 kg Krauss Maffei 350-1900 C1 ini diproduksi tahun 2000. Sebuah mesin injection moulding hidrolik yang kokoh dengan gaya penutupan 300 ton dan diameter screw 70 mm. Memiliki kapasitas kerja 1.900 cm3 dan berat 16.000 kg. Manfaatkan kesempatan untuk membeli mesin injection moulding hidrolik Krauss Maffei 350-1900 C1 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection Moulding Hedew Ih Udopfx Adqsfn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates Hfjdpfxsw Tdymj Adqjn - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, A highly reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your benefits: • IE 3 motor as standard • Approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content reliably maintained at 0.1 mg/m³ (wood dust) • Optional with type-tested rotary valve (FSA) • Tested backflow damper • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3 Ph • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Nominal airflow: 6,927 m³/h • Negative pressure at nominal flow: 2,543 Pa • Suction inlet: 350 mm • Noise level: 71 dB(A) at full load (in accordance with DIN EN ISO 11201) • Chip collection bin volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg Hfedpfx Adohkzt Neqen - Dust class H3 Location: Available immediately from stock in 54634 Bitburg - In stock – immediate availability Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements Hedpfx Adsiidm Njqefn - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -