Beli Fs 520 bekas (3.418)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, There are 2 identical Grasselli membrane skinners available. 1) Year of manufacture: 2013, working width: 520mm, dimensions (L/W/H): approx. 700mm/700mm/1000mm. 2) Year of manufacture: 2014, working width: 520mm, dimensions (L/W/H): approx. 700mm/700mm/1000mm. An on-site inspection is possible. Godpfx Ahet Hxfij Djtw

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 500mm/290mm, cross slide travel: 260mm, turning length: 1000mm, spindle bore: 70mm, spindle speed: 3050 rpm, torque: 920 Nm, rapid traverse X/Z: 8 m/min / 10 m/min, feed rate X/Z: 5 m/min, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection possible. Gjdpfxevnd Tlo Ah Detw

Tahun pembuatan: 1989, Kondisi: siap digunakan (bekas), Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnetic chuck dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center to table distance: 350mm (+/-50mm), table feed: 20m/min, creep feed: 0mm/500mm/min, spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible. Godpfx Aov Exrweh Dstw

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 95.239 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 173937, gaya penjepit: 2.000 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, tinggi cetakan (min.): 250 mm, panjang total: 5.100 mm, lebar total: 1.800 mm, tinggi total: 2.200 mm, berat keseluruhan: 6.630 kg, Perlengkapan: dokumentasi / manual, The machine was running perfectly until the very last day before the new machine was delivered. Therefore, the machine is in good used condition. Gedpjv D Nxlefx Ah Dotw Due to a lack of space in the injection molding area, the machine is being sold and is no longer connected to power. Pump / injection unit / clamping unit are leak-free. Machine manual is available. Videos of the machine are available. Operating hours pump: 95,239 Operating hours automatic: 86,082 Repairs carried out in recent years: - Filter replaced annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed incl. new piston

Kondisi: baru, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 479394, MAKROSKOP PEMBANDING FORENSIK MOTORIS LEICA FS C. TAHUN 2019. BELUM PERNAH DIGUNAKAN! Gsdeyifdcjpfx Ah Dotw Dapat digunakan untuk berbagai penyelidikan forensik, termasuk analisis balistik, jejak pada alat, dan perbandingan dokumen.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 520 mm, CNC-controlled double-head mitre circular saw machine with electronic saw unit swivelling A high-performance circular sawing machine for the precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for single cuts—using both saw heads simultaneously to cut the profile—or in automatic mode, where the double-head saw operates as a single-head saw automaton. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135° Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cutting length in automatic mode: unlimited (the profile is pushed and pulled) Length of the accompanying roller conveyor: 2,300 mm Maximum space required: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with touchscreen and colour graphics on a movable control panel - Import and export of CSV / LTE files (for loading cutting lists from external CAD software) - Graphical profile display Gtodpfx Ahjyhzifo Dow Optionally equipped with a label printer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 78.100 h, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 25 mm, Arburg 520S 1600 290/70 Two-Component Gtsdpsx A Dy Rjfx Ah Dew 78,099 hrs Automatic Injection Unit 1: Horizontal, 290 mm, 25 mm diameter, max. 71 ccm³ Injection Unit 2: Vertical, 70 mm, 18 mm diameter, max. 21 ccm³ Opening Stroke: 925 mm Electric index rotation 12-zone hot runner system integrated 3x core pull 2x air blow (needle shut-off actuation) Various customer inputs/outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800 mm C, G, X, and B axes pneumatic Various customer inputs/outputs (gripper monitoring, etc.) At Maschinen-Handel, we provide a commissioning guarantee for every machine purchased from us, which includes commissioning by the manufacturer. This offers you, as the customer, maximum security on the used machinery market. Important notice! – Current tax information and benefits for used machines: From 01/07/2025, used machines will be tax-deductible with a special depreciation of 30% annually. In addition to the better pricing compared to new equipment, you can claim the same depreciation amounts as for new machinery. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Grinding length 600 mm Grinding width 0 mm Total power requirement 7.5 kW O F F E R We can offer you, subject to prior sale and errors excepted, from stock and without obligation: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Type FS 6 - Z CNC Year of manufacture 1996 _____ Max. grinding length (table longitudinal travel 660 mm): 600 mm Max. grinding width (cross travel max. 360 mm): 0 mm Max. grinding height under wheel approx.: 375 mm Gtjdpfxox Haryo Ah Dew Distance table – spindle center min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping surface: 820 x 0 mm Max. table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Cross / vertical rapid traverse speed: 5 m/min Grinding wheel size: 300 x 50 x 76.2 mm Grinding spindle speed, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW - 400 V – 50 Hz Weight approx.: 2,600 kg Equipment / Special features • SIEMENS CNC control type 840 D with extensive GEIBEL&HOTZ grinding software, user-friendly operation, text and graphical support, easy programming of even complex grinding wheel profiles, and fast chaining of grinding operations. • All standard grinding programs and cycles such as surface and multi-plane grinding with roughing – finishing – spark-out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes. • Table movement via toothed belt drive, enabling both very high and low table speeds, also ideal for profile grinding. • Dressing unit with swing diamond (mounted left on table), automatic dressing cycle, compensation, also for profile dressing. • Fixed dresser with interchangeable holder (mounted left on table). • Fitted sine table permanent electromagnetic chuck approx. 600 x 200 mm, fine-pole. • Wet grinding system with free-standing band filter coolant filtration unit. • Free-standing electrical cabinet, work light, various accessories, operating manuals. Condition : Good to very good condition! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net – upon receipt of invoice Always a large selection of grinding machines in stock – please inquire about your requirements!

Kondisi: baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Mesin gerinda permukaan Geibel&Hotz Tipe FS 40 Primus SA Kondisi: baik Berfungsi penuh Godpfeyh Hutox Ah Detw

Kondisi: bekas, Thicknesser: Lebar penyerutan maksimal: 400 mm Gedpoxwvqdefx Ah Djtw Tinggi penyerutan maksimal: 240 mm Panjang minimum benda kerja: 200 mm Diameter poros pisau: 700 mm Jumlah pisau: 3 Putaran poros pisau: 5000 rpm Penyesuaian tinggi kerja manual Joiner: Panjang total meja: 1810 mm Meja dapat diatur Peredam suara pada poros pisau Pelindung poros pisau Lubang ekstraksi: 2x120 mm Fencing miring Daya listrik: 400 V Daya motor: 5 kW Dimensi keseluruhan: Panjang: 2030 mm Lebar: 800 mm Tinggi: 1160 mm

Kondisi: sangat baik (bekas), Technical data: Max. planing width: 400 mm Max. planing height: 240 mm Cutter shaft diameter: 120 mm Number of knives: 4 Feed speed: 6–12 m/min Gsdpfxsv Rv Dbo Ah Dstw Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Kondisi: bekas, Data teknis: Lebar maksimum penyerutan: 520 mm Tinggi maksimum penyerutan: 250 mm Diameter poros pisau: 110 mm Jumlah pisau: 4 4 kecepatan umpan Pengangkatan elektrik Gtedpfx Ahox Hgdco Djw Daya listrik: 400 V Daya motor: 4 kW Dimensi keseluruhan: Panjang: 1000 mm Lebar: 1080 mm Tinggi: 1080 mm

Kondisi: baru, daya: 368 kW (500,34 hp), konfigurasi gandar: 6x2, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, suspensi: udara, Perlengkapan: ABS, EBS (Sistem Rem Elektronik), pendingin udara,

Kondisi: baru, daya: 368 kW (500,34 hp), konfigurasi gandar: 6x2, warna: biru, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, suspensi: udara, Perlengkapan: ABS, EBS (Sistem Rem Elektronik), pendingin udara,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jumlah bilah: 4, berat keseluruhan: 700 kg, lebar kerja: 520 mm, jumlah mata pisau planer: 4, tinggi kerja: 250 mm, Thick Planer GRIGGIO PSA 520 Specification: • Condition: used • Manufacturer: GRIGGIO • Model: PSA 520 • Max. working width: 520 mm • Max. working height: 250 mm Gtsdjvgm Upjpfx Ah Dew • Table length: 985 mm • Main motor power: 6.0 kW • Total power: 6.75 kW • Cutterhead with 4 TERSA system knives • Slip roller in lower table • Spiral infeed roller • Two steel outfeed rollers behind the cutterhead • Electric height adjustment (up/down) • Analog planing thickness indicator • Cutterhead diameter: 120 mm • Cutterhead speed: 5000 rpm • 2 feed speeds • Extraction port diameter: 150 mm • Weight: approx. 700 kg • Overall dimensions: 115 x 110 x 120 cm (W x L x H)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, gaya penjepit: 1.300 kN, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Tie bar distance (vertical): 520 mm Tie bar distance (horizontal): 520 mm Gtsdpfxswv Hrxe Ah Dow Min/Max mold height: 350 mm Opening stroke: 925 mm Shot volume: 201 cm³ Type: Horizontal Drive: Hydraulic + Apex sprue picker robot Core pulls: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2008, gaya penjepit: 1.700 kN, Perlengkapan: dokumentasi / manual, Demag Systec 170/520 - 600 Clamping Unit Clamping force: 1,700 kN Locking force: 1,870 kN Max: 500 mm Min. mold height: 275 mm Max. mold height: 585 mm Max. daylight between plates: 1,085 mm Platen size: 770 × 770 mm Tie bar spacing: 520 × 520 mm Max. mold weight: 1,900 kg Max. mold weight on moving platen: 1,300 kg Ejector Ejector stroke: 160 mm Ejector force: 59 kN Return force: 29 kN Injection Unit 600 L/D ratio: 20 Screw diameter Ø45 mm Injection pressure: 1,914 bar Shot volume: 323 cm³ Shot weight (PS): 294 g Max. screw stroke: 203 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating capacity: Ø40 → 11.1 kW Ø45 → 11.3 kW Ø50 → 15.7 kW Material hopper capacity: 50 l General Machine Data Oil tank capacity: 400 l Hydraulic unit: 22 kW Gjdpfx Ahex Ury Eo Detw Total system power: 33.1 kW / 33.3 kW / 37.7 kW EUROMAP 6 Dry cycle: 1.95-364 Machine weight (without oil): 6,900 kg Machine dimensions (L × W × H): 5.3 × 1.6 × 2.0 m Noise level: 68 dB(A)

Kondisi: baik (bekas), Tahun pembuatan: 2018, jam operasional: 718 h, tipe tiang: telescopik, jenis bahan bakar: hibrida, warna: putih, Falcon Spider FS290 Gjdpfx Ahjtync Ss Dstw

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 1.997 h, jenis bahan bakar: hibrida, warna: putih, FS330Z-DE01 Gtodpfx Ajuba I Hsh Djw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar sabuk konveyor: 520 mm, lebar total: 1.200 mm, panjang total: 1.030 mm, tegangan masuk: 400 V, frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 01/2027, sekring listrik: 16 A, lebar bukaan: 30 mm, lebar kerja: 520 mm, jenis arus masuk: tiga fasa, Mesin Penggilas Adonan Sinmag SM 520 F Teknologi matang ... telah teruji berkali-kali! Pengoperasian manual yang mudah Untuk semua jenis adonan, penggilasan dan pelapisan Gtjdpfx Asyakkrjh Djw Meja dapat dilipat ke atas Ketebalan gilasan 1 hingga 30 mm Lebar penggilasan hingga 520 mm Panjang sabuk konveyor: 2x 980 mm Mesin berdiri dengan roda, lengkap dengan rol adonan Hanya di tempat kami, sudah lulus uji DGUV V3 Sambungan 400V, steker 16A-CEE Ukuran: 1030 mm panjang x 1200 mm lebar Mesin bekas, sudah dibersihkan & diuji SAB Dengan garansi & layanan suku cadang Opsi: Sabuk penarik Sabuk kain felt Kontrak perawatan Paket layanan Kotak suku cadang Layanan antar Pelatihan & instalasi

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 1.600 mm, lebar penggilingan: 600 mm, New high-precision surface grinding machine, Brand: Kraft, Model: FS 16060 SD Grinding area of 1600 x 600 mm Technical Main Data Grinding length: 1,600 mm Grinding width: 600 mm Distance table surface to spindle center: 820 mm Table drive: Hydraulic Table load capacity (incl. magnetic chuck): 1,230 kg Table speed, steplessly adjustable: 5-25 m/min Max. table travel: 1,700 mm Max. transverse travel speed: 2,000 mm/min Max. transverse travel: 610 mm Max. vertical travel speed: 2,000 mm/min Grinding spindle power: 22 kW Grinding wheel dimensions: 500 x 75 x 304.2 mm Grinding spindle speed: steplessly adjustable Machine weight (net): 8,500 kg Machine width: 7,500 mm Machine depth: 3,400 mm Machine height: 2,700 mm Power supply: 400 V / 50 Hz Features: see attachment. Standard equipment: - 1 piece standard grinding wheel 500x75x302.4 mm - 1 piece standard grinding wheel holder - 1 piece dressing stand including dressing diamond - 1 piece balancing arbor - 1 piece balancing stand - 1 piece machine lamp - 1 set of machine tools - 1 set of documentation including spare parts list - Machine in CE design (metric version) Equipment features: - Surface grinding machine with automatic vertical infeed Godpfx Ajyak H Hoh Dstw - Grinding process: roughing – finishing – spark-out - Siemens S700 touchscreen panel and electronic handwheel for Y - Digital readout in vertical axis Y and cross axis Z - Grinding spindle drive 22 kW (incl. stepless speed regulation) - Electro-magnetic chuck combination (L 1600 x W 600mm) - Magnetic chuck power supply unit - Coolant cleaning system (incl. coolant tank, paper band filter, and pressure pump) Installed special accessories: - 1 additional grinding wheel holder for 500 x 75 x 302.4 mm grinding wheel - 1 full machine enclosure. Completely enclosed machine cover with manually operated sliding doors including safety interlock - 1 dressing device, mounted on the spindle head (for straight dressing of the grinding wheel) - 1 mist extraction system including base frame Precision and surface quality at an optimal price. Ready for grinding, equipped for universal use across a wide range of industrial and application areas.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 500 mm, lebar penggilingan: 250 mm, New High-Precision Surface Grinding Machine – “Optimal” Series Grinding Area: 500 x 250 mm Godpfx Ahoyak Dlo Djtw Standard Features: ● Surface grinder with automatic vertical feed ● Grinding cycle: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital readout for vertical axis Y and cross axis Z ● Table guard and splash shields in stainless steel design ● Electrical cabinet primarily equipped with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Technical Main Data: Grinding Length mm 500 Grinding Width mm 250 Distance table surface to spindle center mm 450 Table Drive Hydraulic Table Load Capacity kg 180 Longitudinal Motion X Table speed, infinitely variable m/min 7 - 23 Max. longitudinal travel mm 560 Cross Motion Z Max. traversing speed mm/min 990 Max. cross travel mm 275 Vertical Motion Y Max. traversing speed mm/min 460 Grinding Spindle / Grinding Wheel Grinding spindle power kW 2.2 Grinding wheel dimensions mm 200 x 20 x 31.75 Spindle speed (speed control optional) min-1 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (incl. table movement) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 grinding wheel flange ● 1 dressing device incl. diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of service tools ● 1 set of documentation incl. spare parts list ● Machine in CE design (metric version) Precision and surface finish at optimal price. Fully equipped for universal use in various industrial and application sectors.

Kondisi: baik (bekas), jarak tempuh: 145.900 km, daya: 390 kW (530,25 hp), pendaftaran pertama: 05/2024, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 3.800 mm, bahan bakar: diesel, rem: retarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, panjang total: 5.990 mm, lebar total: 2.530 mm, Tahun pembuatan: 2024, Perlengkapan: ABS, AdBlue, kendali jelajah, kulkas, kunci diferensial, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, retarder, spion elektrik, spoiler,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 900 mm, gerak cepat sumbu X: 10 m/menit, pergeseran cepat sumbu Y: 10 m/menit, pergerakan cepat sumbu Z: 10 m/menit, torsi: 1.200 Nm, produsen pengendali: Heidenhain iTNC 426, berat benda kerja (maks.): 9.000 kg, tinggi total: 3.320 mm, panjang total: 9.660 mm, lebar total: 4.918 mm, kecepatan spindel (min.): 11 rpm, kecepatan spindel (maks.): 2.500 rpm, The machine is currently disassembled and undergoing refurbishment with the following scope of work: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of independent balancing circuit for the console - Milling head “O” – complete overhaul including replacement of gear wheels - Replacement of gearbox bearings - Replacement of drive belts - Repair of ball screws and their bearings - Resealing of hydraulic circuits throughout the machine and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and upgrade of sealing components - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and spindle motor - Repair and adjustment of Indramat drives - Overhaul of electrical cabinet with control elements - Replacement and upgrade of limit switches throughout the machine - Repair or replacement of cabling for the Heidenhain system including TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain control system including TNC 426, keyboard, and display unit - The machine will be fully operational, with geometric accuracy certified by a protocol - New machine paintwork in RAL 5005 and RAL 9010 color scheme Technical Data of the Machine: Maximum spindle torque: 1200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Total table area: 1000 x 4000 mm Number of T-slots / spacing: 7 / 140 mm T-slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel "X": 4000 mm Cross travel "Y": 1000 mm Vertical travel "Z": 900 mm Minimum distance horizontal spindle axis to table clamping surface: 150 mm Maximum distance horizontal spindle axis to table clamping surface: 1500 mm Minimum distance vertical spindle face to table clamping surface: 130 mm Maximum distance vertical spindle face to table clamping surface: 1030 mm Distance horizontal spindle face to inner edge of table: 80 mm Distance vertical spindle axis to inner edge of table: 100 mm Spindle taper: ISO 50 Drawbar clamping force: 16,100 N Horizontal spindle rotation – bidirectional: 180° Vertical spindle rotation – bidirectional: 180° Spindle head positioning: 2.5° increments Usable main drive motor power: 22 kW Spindle speed range: 11 ÷ 2500 rpm Number of speed steps: stepless Feed range: 1 ÷ 5000 mm/min Rapid traverse in Y and Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Gtsdpfexnkkaex Ah Djw Estimated machine delivery: End of 2025.

Kondisi: baru, Tahun pembuatan: 2024, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2300 mm Jointer fence, angle adjustable: yes Jointer tables, foldable: pneumatic Maximum thicknessing height: 250 mm Thickness table height adjustment: electric with position control Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: sectional Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Gjdpfx Aevadxlsh Dstw Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg