Absaugungen Holtrop & Jansma ODFS-690 2008 Geburtstagsdeal!

Holtrop & Jansma ODFS-690

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), This is a complete production line for house construction. Prices are listed for each individual item. Consisting of the following components (see the attached document as well): Images to follow; they are already included in the attached document. Table 1 (Laying in and clamping the frame construction) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Laying the first facing layer and fastening) €25,300 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying the second facing layer, fastening, and flipping the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical components and insulation) €34,500 - Cross transport with rollers and facing layer - Table cross travel - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first facing layer and fastening the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying the second facing layer and fastening) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic cross clamping Rjdju D Amgopfx Ahven - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swivel unit - Table cross travel unit - Upper guide for holding wall elements vertically Manual surface portal with vacuum lifter on Table 2 €13,800 (Laying the first facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 3 €13,800 (Laying the second facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 5 €13,800 (Laying the first facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 6 €13,800 (Laying the second facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Wall storage rack 1: 12 m long x 24 tracks €11,500 Wall storage rack 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 Abus spreader beam 2 t €20,125 1 spreader beam 2 t

Kondisi: sangat baik (bekas), VK450 2RE log debarker. Equipped with two rotors. One is a stump grinder rotor. The other is a debarking rotor. Minimum-maximum log diameter: 8-45 cm. Minimum log length: 3 m. Comes complete with original VK centering conveyor. Will be sold after complete overhaul. Rodpfx Ahjulv Hzovsn

Tahun pembuatan: 2000, Kondisi: baik (bekas), Lini besi EWD Combimes. Tahun pembuatan 2000, tipe DK90-TL. Pengumpanan kayu dari kiri. Lebar besi maksimum 500 mm, ketebalan maksimum 120 mm. Motor penggerak 90 kW. Frekuensi siklus dengan kayu 4,0 m sekitar 18 buah/menit. Lengkap dengan sistem kontrol EWD asli. Pengiriman dari konveyor penampung sebelum pemisahan hingga pemisah serpihan termasuk. Lini lengkap dan dalam kondisi baik. Rodpfexcwvxsx Ahven

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Rsdpfxow Sy T Ho Ahvjn Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar meja: 300 mm, tinggi potong dengan pisau scoring (maks.): 100 mm, panjang spindle milling: 250 mm, Equipment: Rjdpfx Aswz H Anshven - 1 GRECON feeding transfer system with accumulation for 4 to 5 purged lamellae of varying lengths for finger jointing - 1 GRECON double finger jointing system with deep tooth profile (for glulam beams) - 1 180° transfer system with two-component gluing - 1 GRECON finger jointing press - 1 CNC controlled cross-cut saw - 1 outfeed table

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 13.000 mm, panjang umpan sumbu Y: 240 mm, panjang umpan sumbu Z: 100 mm, kecepatan pemakanan sumbu X: 25 m/menit, gaya penekanan: 40 t, tegangan masuk: 400 V, tinggi total: 1.120 mm, tinggi kerja: 1.120 mm, panjang spindle milling: 330 mm, tegangan kontrol: 400 V, tinggi benda kerja (maks.): 100 mm, diameter alat: 240 mm, kecepatan rotasi (maks.): 6.000 rpm, tekanan udara: 7 batang, panjang total meja penyerut: 13.000 mm, 1 Rodpfx Ahexfzyyovsn

Kondisi: sangat baik (bekas), jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Automatic Grecon Dimter Ultra Finger Jointing Line The machine has undergone a complete overhaul. Specifications: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Spindle diameter: Ø50 mm Redpfxjuddvaj Ahvjn - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Cutter motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding Table: - Min. board length: 150 mm - Max. board length: 700 mm - Feed rate: Infinitely adjustable Dust Extraction: Chipper extraction nozzle diameter: Ø100 mm Cutter extraction nozzle diameter: Ø150 mm Extraction capacity (flow rate): approx. 2,400 m³/h Pneumatics: Operating pressure: 6 bar Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Lamella width: 25–160 mm - Finished lamella length: approx. 6,000+15-50 mm - Pressing force: 3–7.5 T (3,000–7,500 daN) Crosscut Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust Extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (flow rate): approx. 400 m³/h Pneumatics: - Operating pressure: 6 bar - Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Work: 1. Cleaning of machine bodies and application of new paint 2. Replacement with new bearings on: main spindle of tenoner; saw spindle of the press; linear bearings on the tenoner table carriage guide; bearings on conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, assembly of a glue tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for cylinders, solenoid valves, and other pneumatic components in the machines; 7. Replacement of gears and double roller chain on the press’s belt-chain feeder. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders; replacement of worn solenoid valves with new ones. 10. Replacement with new operator panels with graphics on the tenoner control cabinet, press control cabinet, and auxiliary press control panel. 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of machine and press controlling PLCs, adaptation of the machine control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the outfeed table pusher; 14. Overhaul of the electrical installation in the control cabinets, modernization, and drawing of the electrical diagram. 15. Installation of guards, mesh guards, necessary labels, safety stickers, manufacturer’s logo, and nameplates. 16. Replacement with new V-belts, inspection of pulleys, gear motors, and motors; 17. Replacement with new limit switches, inductive sensors, and photoelectric sensors (photo-cells) We specialize in finger jointing machines. Installation, commissioning, and operator training within Poland included in the price; in other countries, available at extra cost. We provide service and access to spare parts.

Tahun pembuatan: 2022, jam operasional: 4.000 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Serutan Kayu Mesin serutan kayu yang berfungsi penuh dalam kondisi sangat baik. Rsdpfsxq Rvujx Ahvon Untuk informasi lebih lanjut, detail teknis, atau foto, silakan hubungi kami.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 3.200 h, Dijual Weinmann WBZ 160/13 Powersix mesin pemrosesan kayu tahun 2015 dalam kondisi sangat baik. Mesin ini hanya digunakan untuk kebutuhan internal perusahaan kami. Peninjauan dapat dilakukan sesuai perjanjian. Rsdpfx Aoxclhcehven

Kondisi: bekas, jarak tempuh: 371.140 km, daya: 309 kW (420,12 hp), pendaftaran pertama: 12/2012, jenis bahan bakar: diesel, berat kosong: 10.170 kg, berat muatan maksimum: 15.830 kg, berat keseluruhan: 26.000 kg, ukuran ban: 315/80 R22,5, bahan bakar: diesel, rem: intarder, warna: kuning, kabin pengemudi: lain, tipe perpindahan gigi: otomatis, kelas emisi: tidak ada, suspensi: lain, jumlah tempat duduk: 2, panjang total: 9.600 mm, Tahun pembuatan: 2012, tinggi konstruksi: 4.000 mm, jumlah tempat tidur: 1, Perlengkapan: ABS, komputer bawaan, kontrol traksi, kopling trailer, pendingin udara,