Beli Galion T 500 bekas (82.858)

Kondisi: baik (bekas), Sentrifugal Serbuk Kayu T & A Tipe MZ 500L - Model: MZ 500 L - Tahun pembuatan: 2001 - Kecepatan putaran: 980 1/menit - Kapasitas pemuatan: 50 kg - Diameter drum: 500 mm - Daya: 4 kW - Kapasitas penerimaan drum – diameter: 500x350 mm - Volume drum: 50 liter - Diagram kelistrikan tersedia Dimensi: P x L x T 1,0 x 1,0 x 1,3 meter / Berat sekitar 380 kg Kesalahan dan kekeliruan input dimungkinkan. Kdedpfoybb Dfox Ag Rji

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 367,75 kW (500,00 hp), jenis bahan bakar: diesel, konfigurasi gandar: 8x4, jarak roda: 4.250 mm, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS,

Kondisi: baru, daya: 397,17 kW (540,00 hp), jenis bahan bakar: diesel, konfigurasi gandar: 8x4, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: hidrolik, komputer bawaan, kopling trailer, retarder,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 397,17 kW (540,00 hp), jenis bahan bakar: diesel, konfigurasi gandar: 8x4, rem: intarder, warna: putih, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, lampu depan tambahan, pendingin udara, retarder,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, warna: lain, Tahun pembuatan: 2026, de Kdsdsxqhy Repfx Ag Rsi

Kondisi: baru, Tahun pembuatan: 2022, Cantilever racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW immediately available from stock. - Load capacity: 500 kg per arm - Load capacity: 2250 kg per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels in total) Racking system consists of: - 04 x uprights, including base, approx. 300 cm from IPE160 - 12 x cantilever arms, approx. 120 cm from IPE 80 - Including all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities of uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use; unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1. - Long-term repurchase guarantee. - Upright base and upright back are welded together for additional safety and reduced installation times, as feet do not need to be bolted to the upright back. - Bracing made from angle steel, eliminating the need for turnbuckle tensioning. This reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,265.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery available on request by our partner carrier; costs depend on postcode. Ksdpfsyuv Hnsx Ag Rsdi Assembly: Our trained staff are available to professionally assemble or dismantle your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 400 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from warehouse - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 04 x uprights incl. base, approx. 400 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE 80 - Incl. all necessary connectors and bolts Why choose BLT cantilever racking? - Certified German manufacturer to DIN EN 1090 – Made in Germany - All stated load capacities for frames and arms are statically verified at 100% load - All racking systems are supplied as hot-dip galvanized units, suitable for indoor and outdoor use without rusting like painted systems. Consistent appearance for many years Kedpfx Agsyuv Dgo Rodi - We use legally required hot-dip galvanized bolt sets as per DIN EN 15048-1 - Long-term availability guarantee for replacements - Base plates and rear uprights are welded together for added safety and reduced assembly time—bases do not need to be bolted separately - Cross bracing made of angle steel, so no tensioning devices or turnbuckles are necessary, reducing assembly time - No slotted hole system, so the upright profile strength is not compromised Price: €2,462.00 net + statutory VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged upon request by our partner carrier; costs are dependent on postcode. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your workplace equipment if required. Our recommendation: Let us know your requirements... We are happy to assist with your projects, from planning and ordering through to installation.

Kondisi: bekas, jarak tempuh: 430.000 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 02/2023, jenis bahan bakar: diesel, berat muatan maksimum: 440.000 kg, berat keseluruhan: 7.975 kg, ukuran ban: 315/70 R 22.5, konfigurasi gandar: 4x2, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 2,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Load capacity: 15 t double-sided rope drum Rope diameter: 8 mm with 6 strands Precision lifting Kedpfoimhcbjx Ag Rjdi Lifting height: 8.5 meters

Kondisi: baik (bekas), Tahun pembuatan: 1980, Travels X/Y/Z 350/250/300 mm, table surface 480x360 mm, installation height 450 mm, max. current 40 A; 4.8 kW; Heidenhain digital display, 3R wire guide system, operating hours 21,383 h Kjdpfx Aeiv H Egsg Rsdi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 6.000 mm, tinggi pemasangan: 1.000 mm, lebar total: 2.400 mm, panjang total: 3.500 mm, gaya penekanan: 500 t, lebar meja: 1.500 mm, panjang meja: 2.000 mm, berat keseluruhan: 45.000 kg, kapasitas tangki oli: 1.200 l, Perlengkapan: penghadang cahaya keselamatan, HIDROLIKSAN HCFP – 500 t Hydraulic Tryout / Test Press for Tool and Forming Technology This machine is a tryout/test press specifically designed for tools used in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. Construction features a robust 4-column design, offering a generously sized working area. The hydraulic system is equipped with REXROTH pump technology. Operation and control are provided by a SIEMENS S7-1200 system with touch panel, offering extensive parameter configuration options. Kodpfxsx D Tv De Ag Rjdi Scope of Supply & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roller block / support console 10 t (GÜTHLE) - 4-channel tool holding system (length 1,500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Machine Condition - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electrics in good condition - Mechanically solid, no visible damage - Machine remains assembled and can be demonstrated under power Pressing Force: - Rated force: 500 t - Max. pressing force at 250 bar: approx. 510 t Dimensions & Weight - Approx. total dimensions: 3,500 × 2,400 × 6,000 mm - Approx. total weight: 45,000 kg Working Area - Table size: 2,000 × 1,500 mm - Inner column spacing: 2,000 × 900 mm - Installation height: 1,000 mm - Stroke: 800 mm (linearly adjustable via linear measurement system) - T-slots available (configuration by customer) Hydraulic System Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary / Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank - Pump: REXROTH axial piston, 100 ccm, approx. 150 L/min - Hydraulic tank: 1,200 L - Oil system: 1,000 L capacity Speeds - Advance stroke: 120 mm/s - Return stroke: 150 mm/s - Working / press stroke: 12 mm/s Control & Safety - Controller: SIEMENS S7-1200 + ET200S - 12" Schneider Electric touch panel Operating modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep-drawing mode with die cushion Measurement & safety components: - Novatechnik linear measuring system (63 bit) for slide & die cushion - SICK light curtains front and rear (height: 1,050 mm) - Side safety fences with limit switches - Remote maintenance via Ethernet possible - Mobile control panel International Notice Block (DE/EN) German Dismantling, deinstallation, loading and transport are carried out exclusively by the buyer, at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection is only possible by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices, or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), SICA SOCKETING MACHINE .1.T. 100-500 For KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 1997 Kodpfsvfyntox Ag Rsdi 1 socket per cycle Socketing tools for: 250mm - 315mm - 400mm sewer pipes The socketing machine is in good condition, ready for operation.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with straightening beam, 1500 mm length - Pressing force: 50 t - With semi-automatic control Control unit (99 programs, each with 16 steps) Kdodpfsdk H A Isx Ag Rji Incl. bending pin (without punch) Incl. tool holder for dies and foot pedal - Infinitely variable stroke adjustment 0-300 mm - Adjustable working speed Working stroke max. 10 mm/sec Return stroke 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 900 mm - Enclosed table - Replaceable wear plate - Weight: 1,300 kg - Bending capacities: Flat bar: 300 x 15 mm Flat bar upright: 60 x 15 mm Round pipe: 3/8" – 2 1/2"

Kondisi: baru, Table load capacity: 500 kg Table load capacity: 250 kg (vertical) Table diameter: 550 mm Swivel range: 135° (-45° to +90°) Rotational speed: 0 – 5 rpm, steplessly adjustable Connection voltage: 230 V Total power requirement: 0.8 kW Machine weight: approx. 0.255 t Space requirements: approx. 0.82 x 0.73 x 0.71 m Welding positioner equipped with: - large through hole: 165 mm - foot switch Kdodpfxeulbbwe Ag Rei - motorised tilting - stepless speed adjustment - 250 amp welding current transmission Demonstration machine – documentation available in English only.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 32.769 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H/7529, gaya penekanan: 500 t, lebar meja: 2.400 mm, panjang meja: 1.300 mm, panjang langkah: 800 mm, TECHNICAL DETAILS Pressing force: 500 t Table area: 2,400 x 1,300 mm Ram area: 2,400 x 1,300 mm Stroke: 800 mm Max. stroke length: 830 mm Control system: Siemens S7-400 Installation height: 400 mm/min Working speed: 25 - 60 mm/s Closing speed: 500 mm/s Rapid traverse up: 450 mm/s Tool base area: min. 1,400 x 900 mm Tool base area: max. 2,300 x 1,200 mm Tool weight: max. 3,000 kg MACHINE DETAILS Weight: 83,000 kg Power output: 255 kW Rated current: 435 A Kdedpfx Aowa S R Isg Roi Voltage: 400 V Frequency: 50 Hz Hydraulic pressure: 255 bar Oil capacity: 3,700 l

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: 1044, Electric pallet truck tiller 2500 kg very well maintained Ksdpfx Asdg T Ukjg Rsdi integrated charger immediately ready for use with TÜV valid until 2024 If you have any questions, please feel free to contact me Thank you in advance

Kondisi: sangat baik (bekas), Dijual: Mesin frais universal WAGNER FCA 500 dalam kondisi teknis sangat baik. Mesin konstruksi Jerman yang kokoh, dilengkapi pembacaan digital 3 sumbu (DRO) yang sangat memudahkan pengerjaan presisi. Mesin frais ini sangat cocok untuk bengkel pembuatan alat, produksi satuan, dan pekerjaan servis. Data teknis: • Produsen: WAGNER Maschinen • Model: FCA 500 • Tahun produksi: 2004 • Pembacaan digital SINO – 3 sumbu (X,Y,Z) • Kecepatan spindle hingga 2000 rpm • Tegangan: 380 V • Frekuensi: 50 Hz Kedpfx Agsyrhb Se Rodi • Daya total: 6,5 kW Perlengkapan: • Kepala frais vertikal • Pembacaan digital SINO • Pengaturan kecepatan • Meja kerja besar dengan alur T Mesin lengkap, dalam kondisi teknis baik dengan bekas pakai normal.

Kondisi: bekas, Steinert Drum Elektromagnetik Kedoyv Dt Hepfx Ag Rsdi

Kondisi: bekas, Konveyor Sabuk LKOREMAN Ksdpeyv Drvofx Ag Rodi

Kondisi: bekas, Slide pengatur dosis listrik KISA Ksdpsyvv Ehjfx Ag Redi

Kondisi: baik (bekas), renz_punch_500_de Ksdpsynfxajfx Ag Redi

Kondisi: sangat baik (bekas), Derek bengkel profesional dengan counterweight dan penggerak hidrolik. Kondisi sangat baik, sepenuhnya berfungsi, siap digunakan. • Model: Hydrobull HB 500 GK • Produsen: E. Ziegler GmbH, Renningen (Jerman) • Tahun produksi: 2004 • Kapasitas angkat: 500 kg • Tinggi angkat: 280 cm • Panjang lengan: 150 cm • Counterweight: 850 kg • Berat sendiri: sekitar 1200 kg (350 + 850 kg GG) • Jangkauan: A1–A7 (240–500 kg, sesuai tabel beban) • Struktur baja, bergerak dengan roda industri • Pengangkatan dan penurunan lengan secara hidrolik • Kondisi teknis dan visual sangat baik Kdedpfx Aexmt H Ieg Rji

Kondisi: baru, Approx. 8.4 linear meters, H: 500 cm, compartment load: 4,500 kg, pallet racks, heavy-duty racks, high bay racking, industrial shelving, racking available immediately from stock Approx. 8.4 lm, H: 500 cm, compartment load: 4,500 kg, pallet racking, heavy-duty racking, high-rack storage, industrial shelving, racking available immediately from stock Specifications: - Height: approx. 500 cm - Depth: approx. 110 cm - Length: approx. 8.4 linear meters - Load capacity: 4,500 kg per compartment - Uprights galvanized - Beams: 270 x 15 x 5 cm, type T45 - Beams color: orange - New BLT PR50/101 - Manufactured in Europe & tested according to the latest standard DIN EN 15512. - 100% quality at the best price. Racking consists of: - 04 x uprights approx. 500 cm x 110 cm, disassembled. - 18 x beams approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. Kdedpfeyuw D Iex Ag Rji - Levels: floor + 3 - 36 pallet positions incl. floor locations. -- AVAILABLE IMMEDIATELY MULTIPLE TIMES -- Price: €1,840.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Pre-assembly of the frames can be carried out by us at a small extra charge of €12.50/net per piece.

Tahun pembuatan: 1997, jam operasional: 54.646 h, Kondisi: bekas, Traub TNA500 SN 253 Kdsdpfxoyt Slwo Ag Rsi Spindel 2800 rpm Revolver alat 12-positi Dilengkapi dengan alat bertenaga Daya 46 kVA

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, berat keseluruhan: 830 kg, Kondisi sangat baik Kedpfx Agsyuug Ts Rjdi