Beli Gastl Rg 200 bekas (18.116)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Zheng Zhou Shi
3.958 km
Peralatan penghancur
Construction waste recycling plant100-200 t/h sand gravel production plant
Hubungi
Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 300 kW (407,89 hp), berat keseluruhan: 65.000 kg, ukuran ban: 6*2, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, konfigurasi gandar: 3 gandar, kelas emisi: Euro 3, Tahun pembuatan: 2026, nomor mesin/kendaraan: V9638J96, Perlengkapan: hidrolik, komputer bawaan, penggerak semua roda, Sand- und Kiesaufbereitungsanlage | MINGYUAN Schwerindustrieausrüstung
Eine Sand- und Kiesaufbereitungsanlage ist ein integriertes System zur Herstellung hochwertiger Baustoffe wie Sand, Kies, Splitt und künstlichem Sand. MINGYUAN bietet komplette Lösungen für das Brechen und Sieben von Zuschlagstoffen für Steinbrüche, den Bergbau, den Bau sowie Infrastrukturprojekte und gewährleistet dabei eine effiziente Materialaufbereitung und gleichbleibende Produktionsleistung.
Allgemeine Beschreibung
Die Sand- und Kiesproduktionslinie von MINGYUAN kombiniert fortschrittliche Brech-, Sieb-, Wasch- und Fördertechnik, um Rohmaterialien wie Kalkstein, Granit, Basalt, Flusskies und Quarz zu Baustoffsanden und Kies unterschiedlicher Körnung zu verarbeiten. Die Anlage umfasst in der Regel Backenbrecher, Prallbrecher, Kegelbrecher, Vibrationssiebe, Sandwaschanlagen, Bandförderer und Entstaubungsanlagen und bildet so ein vollständiges, automatisiertes Produktionssystem. Anwendung findet sie im Straßenbau, in Betonmischwerken, im Baustoffsektor und in Wasserkraftprojekten.
Leistungsspektrum: 30–1.000 Tonnen pro Stunde (kundenspezifisch anpassbar)
Nedpfx Ajq Nia Ieaaewf
Aufgabekörnung: ≤800 mm (abhängig vom Brechertyp)
Endkörnungen: 0–5 mm (Sand), 5–10 mm, 10–20 mm, 20–40 mm (Kies)
Hauptausstattung: Backenbrecher (PE/PEX-Serie), Kegelbrecher, Prallbrecher, VSI-Sandhersteller, Vibrationsförderer, Vibrationssieb, Sandwaschanlage, Bandförderer, Steuerungssystem
Energieversorgung: Elektrisch oder dieselbetrieben wählbar
Automatisierung: PLC-Steuerung mit Echtzeitüberwachung und einstellbarer Kornverteilung
Die MINGYUAN Heavy Industrial Equipment Co., Ltd. bietet komplette Lösungen für Sand- und Kiesaufbereitung mit zuverlässiger Leistung, wettbewerbsfähigen Preisen und professionellem After-Sales-Service für Kunden weltweit in der Bergbau-, Bau- und Zementindustrie.
2. Brechen und Sieben:
- Die gewonnenen Rohstoffe müssen häufig gebrochen und gesiebt werden, um die Teilchengröße zu verringern und nach Korngrößen zu sortieren.
- Brecher zerkleinern größere Gesteinsbrocken, und Siebe trennen das Material nach Korngröße.
3. Waschen:
- Durch das Waschen werden Verunreinigungen wie Ton, Schluff und Staub aus den Rohstoffen entfernt. Dies ist besonders bei Zuschlagstoffen für den Bau wichtig.
4. Klassieren und Sortieren:
- Nach der Wäsche werden die Materialien häufig klassiert und sortiert, um sie nach Kornfraktionen und Qualitätsstufen separieren zu können.
5. Lagerung und Haldenbildung:
- Aufbereitete Materialien werden in Halden zwischengelagert. Geeignete Lagermöglichkeiten sind notwendig, um verschiedene Körnungen zu managen.
6. Förderung und Transport:
- Förderbandsysteme transportieren die Materialien zwischen den verschiedenen Verfahrensstufen. Den Abtransport zur Verteilung übernehmen Lkw oder Förderbänder.
Schlagworte
Sandproduktionslinie, Kiesaufbereitungsanlage, Zuschlagstoff-Brecheranlage, Steinbrecher, Sandherstellungsmaschine, Sandwaschanlage, Vibrationssieb, Backenbrecher, Kegelbrecher, Prallbrecher, VSI-Brecher, Steinbruchausrüstung, Bergbaumaschinen, Baustoffzuschlagstoffe, künstlicher Sand, Splitt, Flusskies, Kalksteinbrecher, Basaltbrecher, Granitbrecher, Sandwaschanlage, Siebanlage, Fördersystem, MINGYUAN Sandanlage, Aufbereitungsmaschinen für Zuschlagstoffe, Steinbrechlinie, Sand- und Kieswaschanlage, Hochleistungsbrecher, Umweltfreundliche Sandanlage, Hersteller von Zuschlagstoffproduktionsanlagen.
Iklan kecil
Nanjing
3.692 km
Mesin gerinda pusat
Technica14-M-200 (Manual)
Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 170 kg, kecepatan spindle penggilingan: 45.000 rpm, kecepatan spindel (min.): 5.000 rpm, kecepatan spindel (maks.): 45.000 rpm, diameter penjepit: 140 mm, panjang penjepitan: 2.000 mm, masa garansi: 12 bulan, DE2001
Njdpfxoxrnche Aaaswf
Iklan kecil
Zheng Zhou Shi
3.958 km
Crawler / Penghancur Seluler Terpasang di Jalur
Crawler / Track Mounted Mobile Crusher200 t/h for sand gravel crushing plant
Hubungi
Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 450 kW (611,83 hp), Tahun pembuatan: 2025, de
Nwjdpfx Aaeq Nfvuoajf

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Sumitomo DemagIntElekt 50/370-200
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, sumitomo-demag-intelekt-50370-200-en
Nwedpfx Aasy Dp E Rsaof
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
KraussMaffeiKM 200-1400 CX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode
Year of manufacture: 2018
Injection unit:
Screw diameter: 60 mm
Shot weight: 617 g
Injection pressure: 2,007 bar
Metering volume: 679 cc
Clamping unit:
Nedjy Dqiqepfx Aaaewf
Clamping force: 200 t
Tie bar distance: 560x560 mm
Platen size: 915x915 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: MC6 - touchscreen
Additional equipment:
Very good technical condition
Operating hours: 12,000 h in automatic mode
Euromap 67 interface
Robot interface
Air valve with vacuum monitoring x 1
Hydraulic core pull units x 3
Air core pull units x 3
Hot runner control x 10
Injection unit hardened – bimetallic
Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps
Parallel movements
Proportional valve on injection unit – precise injection
Machine manufactured in December 2018, delivered to customer in 2019
Robot Krauss Maffei LRX Easy Control 100
Year of manufacture: 2019
4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic
Touch control panel
Robot safety package
Robot with adapter, conveyor belt, and safety enclosure
Purchase of robot and conveyor belt subject to surcharge
Dimensions:
Weight: 11,500 kg
Length/Width/Height: 6.10x2.20x2.30 m
All offered machines are started up by our service technicians prior to sale.
It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Temukan lebih banyak mesin bekas
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Engele-victory 200/80
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating Hours: approx. h in automatic mode
Year of manufacture: 2012
Injection Unit:
Screw diameter: 30 mm
Shot weight: approx. 71 g
Injection pressure: 2400 bar
Injection volume: 85 ccm
Clamping Unit:
Clamping force: 80 t
Tie bar spacing: 0x0 mm
Platen size: 670x600 mm
Ejector: electric
Clamping unit: hydraulic
Control: CC 200 touchscreen
Additional equipment:
Production line with Engel Viper 12
Machine in very good technical condition
Electric machine: energy-saving and very quiet
Operating hours: approx. h in automatic mode
Air valve x 4
Hydraulic core pull x 1
Hot runner control x 12
Injection unit is wear-resistant and corrosion-resistant
Main motor – servo motor with inverter – energy-saving
Proportional valve on the injection unit – precise injection
Kistler sensor – mold pressure control
Parallel movements
Robot Engel Viper 12
Year of manufacture: 2012
5-axis robot: 3 axes driven by servo motors (electric): X, Y, Z; Axis B – pneumatic and axis C
Nsdpfx Ajy Dp Irsaaowf
Touch control panel
Safety package for robot
Robot with adapter, conveyor belt and safety enclosure
Purchase of the robot and conveyor belt at an additional cost
Dimensions:
Weight: 5500 kg
Length/Width/Height: 4.40x1.40x2.00 m
All offered machines are commissioned by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Iklan kecil
Egenhofen
11.027 km
Tarik gergaji
GrauleZS 200 N
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Cutting height at 90°: 200 mm
Cutting length: 410 mm
Mitre range horizontal: 45° - 90° - 25°
Mitre range vertical: 60° - 90° - 30°
Roller conveyor / support table: no
Saw blade diameter: 520 mm
Speed: 2800 rpm
Nwedpfx Aaoiuld Soaof
Motor power: 5 kW
Motor brake: yes
Extraction port: 100 mm
Machine length:
Machine width:
Weight: 300 kg
Iklan kecil
Nattheim
11.085 km
Unit hisap
FelderRL 200
Hubungi
Kondisi: bekas, Tahun pembuatan: 2007, Koneksi ekstraksi: 200 mm Aliran volume maksimum: 4000 m³/jam Luas filter: 20 m² Tekanan suara: 70 dB Volume serpihan: 400 l Kebutuhan ruang: 1775 x 898 x 2005 mm
Nwsdpfx Aoy Hry Asaajf
Lokasi gudang: Nattheim
Iklan kecil
Günzburg
11.086 km
Digunakan hid. tekan rem
WEINBRENNERGP 200/3050
Hubungi
Tahun pembuatan: 1992, Kondisi: baik (bekas),
Iklan kecil
Günzburg
11.086 km
Mesin tekuk pelat
WEINBRENNERGP 200/3050
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Tekanan: 200 t
Panjang penekukan: 3050 mm
Jarak antar kolom: 2550 mm
Stroke ram: 274 mm
Kontrol: Cybelec ModEva Pac
Berat mesin kira-kira: 17.000 kg
Nwodpfx Aexb Sugsaaof
Aksesori/Perlengkapan:
- Konversi kontrol ke Cybelec ModEva Pac
- 2 alat bantu penekukan di depan mesin
- Tirai cahaya Fiessler di depan mesin
- Saklar kaki
Iklan kecil
Belanda
11.216 km
Mesin pembungkus peregangan dengan film penutup atas
UNITECH S.r.l.UNIWRAP 200 AE
Hubungi
Kondisi: bekas, Technical data: Turntable stretch wrapping machine with top cover film, for fully automatic, waterproof packaging of palletized goods
Manufacturer: UNITECH S.r.l., Via Buscaglia 10, 27029 VIGEVANO, Italy
Type: UNIWRAP 200 AE
Year of construction: 2007
Throughput rate: approx. 30 pallets per hour
Connected load: 400 V / 50 Hz / 7.5 kW
Weight: 3,700 kg
Stretch film, roll diameter: 300 mm
Roll height: 500 to 750 mm
Core diameter: 76 mm
Film thickness: 15 to 35 microns
Roll weight: 25 kg
Top PE cover film, roll diameter: 250 mm
Core diameter: 76 mm
PE film roll width max.: 1,700 mm
Film thickness: 60 to 100 microns
Control: Siemens Simatic S7-200
Control panel: Siemens OP 77A
Dimensions of wrapping unit: 3,400 x 3,100 x 3,900 mm (L x W x H)
Dimensions of roller conveyor: 10,000 x 1,150 x 570 mm (L x W x H)
Nedpfx Aaju Tg Nnoajwf
Description:
The Uniwrap 200 AE is a robust stretch film wrapping system, constructed from high-quality components to ensure long-term reliability and minimal maintenance costs. The use of state-of-the-art technology enables complete control over the film tension applied to the product, pre-stretch ratio, and overall containment force of the packaging.
The Uniwrap 200 AE is equipped with a top film applicator that can be programmed according to customer requirements.
Condition:
The entire packaging line is still installed, in truly good condition, immediately operational, and can be inspected in operation on site.
Notes:
All documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is fully available. Inspection possible by appointment. We do not assume liability for the technical specifications or any errors.
Iklan kecil
Belanda
11.216 km
Ballenpresse 200 t mit Horizontalabbindung
MACPRESSE EUROPA S.R.L.112
Hubungi
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 44.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, kapasitas tangki oli: 3.100 l, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2025, Technical Data Baler:
Nwjdpex Dnb Uefx Aaaef
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of Manufacture: 2002, partially overhauled in December 2025
Operating hours: 44,590 hours, as of December 2025
Main press force: 200 t
Specific press force: 16.5 kg/cm²
Feed hopper dimensions: 2,000 x 1,020 mm
Feed volume: 2.65 m³
Theoretical throughput: 795 m³/hour
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 75 kW
Tying: 5-fold horizontal, fully automatic
Throughput (MSW): approx. 48 to 54 t/hour, depending on material
Hydraulic oil tank volume: 3,100 L
Machine weight (press): approx. 50.8 t
Scope of delivery:
1 unit baler MACPRESSE, type 111A
1 unit operating manual with CE declaration, electrical and hydraulic diagrams
Comments:
The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced:
• Hydraulic oil tank drained and cleaned
• Oil and air filters replaced
• New hydraulic oil filled
• All hydraulic hoses replaced
• Dismantled press ram, disassembled into individual parts, overhauled the mechanics
• Replaced the front two main running rollers
• Replaced the knives on the press ram
• Main hydraulic cylinder dismantled and disassembled, checked cylinder tube and piston rod, replaced complete set of seals
• Counter-blade in the frame replaced
• Knife clearance adjusted to approx. 3 mm
• Upper steel guide rails on the left and right in the frame replaced
• Removed worn press floor, replaced base plate with wear-resistant HARDOX steel
• Dismantled tying and twisting unit, disassembled, overhauled the mechanics, replaced all twisting shafts and ball bearings
• Replaced all wire spools in the needle heads
• Cleaned and readjusted wire cutters, lubricated and tensioned chains
• All wire guide rollers refurbished
• All door contact switches replaced
• Vibulator dismantled, disassembled and serviced
• General maintenance performed
Finally, the baler was tested in both manual and automatic modes; see our video of the machine function test.
Complete documentation is included (operating manual, CE declaration, electrical/hydraulic diagrams). Inspection is possible by appointment. We accept no liability for the technical data or possible errors.
Iklan kecil
Cantù
11.224 km
Mesin pelapis tepi
HIRZT - ITALYB 200
Hubungi
Kondisi: baik (bekas), 0366
Nwodpfx Aaoy Hlapoasf
Iklan kecil
Borken
11.250 km
Hangat: +50°C / +200°C Dingin: -70°C / +100°C
CTS Temperaturschock-PrüfschrankTSS-70/350-A 130 Liter
Hubungi
Kondisi: sangat baik (bekas), CTS
Type: TSS-70/350-A
Water-cooled refrigeration unit
For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/350-A.
This device is designed for conducting thermal shock tests and is typically used in industrial, research, and quality assurance applications.
Fields of application:
- Material testing
- Aging tests
- Electronics and component testing
- Thermal shock and temperature cycling tests
Technical data:
Type: TSS-70/350-A
Temperature range:
Hot chamber: +50°C to +200°C
Cold chamber: -70°C to +100°C
Electrical data:
Connection: 400 V, 3/N, 50 Hz
Rated power: approx. 20.4 kW
Rated current: approx. 36.5 A
Refrigeration system:
Refrigerants: R404A / R23
Pre-cooling stage: approx. 6.0 kg
Cooling stage: approx. 3.0 kg
Water-cooled
Features / Equipment:
- CTS control unit with touch display
- Microprocessor-controlled regulation and monitoring system
- Program operation
- Digital target/actual value display
- 2-zone system (hot and cold chambers)
- Automatic carriage for shock tests
Technical design:
- Separate hot and cold chambers
- Carriage system for rapid temperature change
- Test chamber made of stainless steel
- Removable shelf / grid rack
- Viewing window in the door
- Water cooling connections available
- Integrated control cabinet
Dimensions:
External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm
Unit installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm
Nodpfey Hkgbex Aaajwf
Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm
Weight:
approx. 950 kg
Additional data:
Protection class: IP 54
Operating overpressure: approx. 25 bar
Test pressure: approx. 27.5 bar
For your safety as a buyer, please note the following information!
The following steps are carried out in advance on the chambers we offer:
1. Function check and replacement of necessary components
2. If necessary, refilling with legally compliant refrigerant
3. Leak test with certificate
4. Upon successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: see pictures
(Specifications and data subject to change and errors!)
We are happy to answer further questions by phone.
Iklan kecil
Borken
11.250 km
Hangat: +50°C / +200°C Dingin: -80°C / +100°C
CTS Temperaturschock-PrüfschrankTSS-70/130 130 Liter
Hubungi
Kondisi: sangat baik (bekas), CTS
Type: TSS-70/130
Water-cooled chiller unit
For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130.
This unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance.
Application areas:
- Material testing
- Aging tests
- Electronics and component testing
- Thermal shock and cyclical temperature testing
Technical data:
- Type: TSS-70/130
- Test volume: 130 liters
- Temperature range:
- Hot chamber: +50°C to +200°C
- Cold chamber: -80°C to +100°C
- Heating rate: approx. 6 K/min from ambient to +180°C
- Cooling rate: approx. 4 K/min from ambient to -60°C
- Temperature deviation:
±1 K over time
±2 K spatially
- Rate of temperature change:
max. 100 K/min on average for thermal shock testing
without radiant heat
- Transfer time between chambers:
≤ 15 min in the range from -65°C to +200°C with 10 kg ICs
- Switching time:
< 10 seconds
Electrical data:
- Connection: 400 V, 3/N, 50 Hz
- Rated power: approx. 16.7 kW
- Rated current: approx. 26.8 A
- Site-side fuse: 32 A (slow blow)
- Connector: Cekon 32
Refrigeration system:
- Refrigerants: R404A / R23
- Water-cooled, low-noise, fully hermetic
Features / Equipment:
- CTS control panel
- Microprocessor controlled regulation and monitoring system
- Programmable operation
- Up to 100 test programs possible
- Digital setpoint and actual value display
Nwedjy Hkfdopfx Aaajf
- RS232 interface
- 2 free switching channels for external test specimen control
- Failure warning via potential-free contact
- Load up to 30 V-DC, 2 A
- EMC tested
Technical design:
- Hot and cold chambers
- Trolley with spindle drive
- Test compartment / trolley made of stainless steel, material no. 1.4301
- Removable basket made of stainless steel wire
- Pipe sleeve NW 50 with closure plug
- Compressed air connection 1/4" male thread
- Condensate drain (non-pressurized) R 1/2" internal thread
- Safety door lock
- Lockable door with window
Dimensions as per installation drawing:
- External dimensions approx.: 2335 x 940 x 1820 mm
- Delivery opening approx.: 1990 x 940 x 1652 mm
- Test space dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm
- Window: 300 x 300 mm
Additional data:
- Protection class: IP 22
- Noise level: < 60 dB(A)
- Weight: approx. 950 kg
- Average consumption per test cycle: approx. 8 kWh
For your safety as a buyer, please note:
The following points are carried out in advance for all chambers we offer:
1. Function check and replacement of necessary components
2. Refilling with legally compliant refrigerants if required
3. Leak test with certificate
4. After successful inspection, chambers undergo a documented test run.
Condition: used
Scope of delivery: see photos
(Specifications subject to change or errors!)
Further questions can be answered by phone.
Iklan kecil
Borken
11.250 km
Hangat: +50°C / +200°C Dingin: -80°C / +100°C
CTS Temperaturschock-PrüfschrankTSS-70/130 130 Liter
Hubungi
Kondisi: sangat baik (bekas), CTS
Type: TSS-70/130
Water-cooled refrigeration unit
For sale is a premium thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130.
This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance.
Applications:
- Material testing
- Aging tests
- Electronic and component testing
- Thermal shock and temperature cycling tests
Technical data:
Type: TSS-70/130
Test volume: 130 liters
Temperature range:
Hot chamber: +50°C to +200°C
Cold chamber: -80°C to +100°C
Heating rate: approx. 6 K/min from ambient temperature to +180°C
Cooling rate: approx. 4 K/min from ambient temperature to -60°C
Temperature constancy:
±1 K over time
±2 K spatially
Temperature change rate:
Max. 100 K/min average for shock tests
Without radiant heat
Transfer rate:
≤ 15 min in range from -65°C to +200°C
with 10 kg ICs
Nodpfey Hkd Hox Aaaewf
Transfer time:
< 10 seconds
Electrical data:
Connection: 400 V, 3/N, 50 Hz
Rated power: approx. 17.2 kW
Rated current: approx. 29 A
Site-side protection: 32 A slow-blow
Connection: Cekon 32
Refrigeration system:
Refrigerants: R404A / R23
Water-cooled, low-noise, fully hermetic
Features / Equipment:
- CTS control panel
- Microprocessor-controlled regulation and monitoring system
- Program operation (up to 100 test programs possible)
- Digital setpoint and actual value display
- RS232 interface
- 2 free switching channels for customer test item activation
- Fault indication via potential-free contact
(Load up to 30 VDC, 2 A)
- EMC tested
Technical design:
- Hot and cold chamber
- Drawer carriage with spindle drive
- Test space / basket made of stainless steel, material no. 1.4301
- Insert basket made of stainless steel wire
- Tube feedthrough NW 50 with sealing plug
- Compressed air connection 1/4" external thread
- Gravity condensate drain, R 1/2" female thread
- Safety door lock
- Lockable door with window
Dimensions according to installation sketch:
External dimensions approx.: 2335 x 940 x 1820 mm
Installation dimensions approx.: 1990 x 940 x 1652 mm
Test chamber dimensions: Height approx. 410 mm; Width approx. 480 mm; Depth approx. 660 mm
Window: 300 x 300 mm
Further data:
Protection class: IP 22
Sound pressure level: < 60 dB(A)
Weight: approx. 950 kg
Average consumption per test cycle: approx. 8 kWh
For your safety as a buyer, please note the following information!
The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If required, refill with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: see pictures
(Changes and errors in technical data reserved!)
Further questions? We are happy to answer them by phone.
Iklan kecil
Langenfeld (Rheinland)
11.262 km
Unit penggerak untuk mesin edge banding
Homag - BrandtFahrwerk für Edgeteq S-200
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Sasis untuk mesin pelapis tepi
Sudah terpasang pada Homag Edgeteq S-200, KDF 1130 FC (1100kg). Namun, kemungkinan juga cocok untuk mesin lain, seperti Brandt (mungkin perlu sedikit penyesuaian).
Panjang profil U sekitar 1130 mm
Tinggi keseluruhan termasuk roda sekitar 150 mm
4 roda baja kokoh sebagai roda putar dengan nipple pelumas
2 rem pengunci
2 pelat penambah untuk penyesuaian ketinggian
Nwsdsw S Dmdepfx Aaaof
Mesin dapat didemonstrasikan langsung di tempat kami setelah membuat janji. Kami hanya menawarkan mesin yang siap untuk didemonstrasikan di gudang kami, lihat juga "penawaran lain dari penjual ini".
Iklan kecil
Austria
10.648 km
Alat press pelurus
SICMIPCR 200
Hubungi
Kondisi: baru, de-01
Nwjdpfx Asynnfisaaof
Iklan kecil
Garbsen
11.055 km
Penumpuk palet
ToyotaSPE 200 D, 330 h!
Hubungi
Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 330 h, kapasitas angkut: 2.000 kg, tinggi angkat: 1.600 mm, pengangkatan bebas: 172 mm, jenis bahan bakar: listrik, tipe tiang: simpleks, tinggi konstruksi: 1.335 mm, panjang garpu: 1.200 mm, berat kosong: 1.350 kg, panjang total: 1.600 mm, jenis penggerak: Elektro, lebar konstruksi: 790 mm, Electric High Lift Stacker
Load Centre: 600 mm
Mast Type: Standard
Technical Condition: Very good
Front Tyres Type: Polyurethane
Front Tyres Condition: 100%
Rear Tyres Type: Polyurethane
Njdpeqynq Rofx Aaaowf
Rear Tyres Condition: 100%
Battery Voltage: 24V
Battery Capacity: 300Ah
Battery Year: 2022
Description: Factory-refurbished used device from Toyota including new inspection and new certification according to FEM (formerly UVV). Equipped with power steering.
Impulse control, initial lift, CE certificate,
Iklan kecil
Cloppenburg
11.148 km
Vollmer CMF 200 tahun 2013
VollmerCMF 200
Hubungi
Kondisi: bekas, Tahun pembuatan: 2013, Suitable for automatic, double-sided grinding of tooth flanks on carbide-tipped circular saw blades.
Accessories:
- Full enclosure
- Coolant system
- Automatic central lubrication
- Measuring system for saw blade measurement
- Control panel with LCD color display
- DNC service
- Alphanumeric keyboard
- Grinding speed and stroke length adjustable according to tooth surface
- 2 grinding wheel mounts
- Coolant fill level monitoring
- Automatic grinding wheel compensation
- Prepared for robotic operation with automatic loading door
- Oil collection tray
- 2 x magnetic saw blade holders >Ø 320mm, >Ø 180mm
- 1 centering ring
Circular saw blade diameter: 200 - 840 mm
Nsdov Sbmqspfx Aaajwf
Circular saw bore diameter: from 16 mm
Tooth pitch: 6 - 180 mm
Grinding stroke: up to 25 mm
Tangential clearance angle: 0 to 10°
Max. grinding wheel diameter: 125 mm
Grinding wheel bore diameter: 32 mm
Grinding spindle speed: 1600 - 5500 rpm, variable
Connected load approx.: 8 kVA (400 V / 50 Hz)
Dimensions W x D x H: 2770 x 1900 x 2045 mm
Weight: approx. 4700 kg
Color: grey
Iklan kecil
Cloppenburg
11.148 km
Vollmer CL 200 tahun 2010
VollmerCL 200
Hubungi
Kondisi: bekas, Tahun pembuatan: 2010, Suitable for the automatic grinding of tooth face, tooth back, and blade body on carbide-tipped circular saw blades in a single clamping operation. All common tooth geometries (flat, alternate, trapezoidal tooth, etc.) can be ground automatically and in a single pass.
Nwsdpfswp Eblox Aaaof
Accessories:
- Full enclosure
- Measuring probe
- System for grinding with oil cooling
- Automatic fire extinguishing system
- Grinding mist extraction unit N 183
- Alphanumeric keypad insert
- Oil drip tray
- Machine lamp
Saw blade diameter: 80–840 mm
Bore diameter: from 10 mm
Blade thickness: < 8 mm
Tooth pitch: 6–120 mm
Cutting length:
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Cloppenburg
11.148 km
2019 Vollmer CM 200 / ND 230
VollmerCM 200 / ND 230
Hubungi
Kondisi: bekas, Tahun pembuatan: 2019, Suitable for the automatic grinding of carbide-tipped circular saw blades on both face and top in a single clamping operation. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically in a single pass.
Accessories:
- Full enclosure
- Wet grinding system
- Equipment for robotic operation with automatic loading door
- ND 230 loader
- Measuring device for saw blade measurement
- Chip divider grinding attachment
- Infinitely variable grinding speed for both grinding spindles, from 1600 to 5500 rpm
- Grinding speed and grinding path per tooth surface infinitely adjustable
- Automatic central lubrication
- Software package for oscillation grinding on rake and clearance angles
- Automatic closing flap
- Automatic fire extinguishing system
- Electrostatic oil mist separator N281
- Calibration tool
- Saw blade holder with guide bushing Ø 16 mm for saws >Ø180
- Saw blade holder with guide bushing Ø 16 mm for saws >Ø320
- Grinding wheel flange for chip divider
- Centering ring for adapter pin Ø 16 mm for saw hole Ø 32 mm
- Centering ring for adapter pin Ø 16 mm for saw hole Ø 40 mm
- Centering pin Ø 10 mm
- Machine lamp
- Saw blade air blast device
- Data entry station DES 400
- 3 loading carts with 30 mm spindles
- Oil catch tray
Nwjdpsyvgf Dsfx Aaaef
- Automatic central lubrication
Saw blade diameter: 200 – 840 mm
Bore diameter: from 16 mm
Blade thickness: up to 15 mm
Tooth pitch: from 6 to 180 mm
Cutting length: up to 25 mm
Rake angle: from -35° to +20°
Clearance angle: 0° - 25°
Bevel on tooth back: up to 45°
Bevel on tooth face: up to 30°
Bevel on negative tooth face: up to 30°
Tooth height difference: any
Grinding wheel diameter: max. 200 x 32 mm
Dimensions (W x D x H): 2770 x 1900 x 2058 mm
Weight: 4700 kg
Connected load: 8.7 kVA (400 V / 50 Hz)
Color: grey RAL 7045 / grey RAL 7047
Iklan kecil
Cloppenburg
11.148 km
2010 Vollmer QXD 200
VollmerQXD 200
Hubungi
Tahun pembuatan: 2010, Kondisi: bekas, 1
Njdpfeycckcex Aaaowf
Iklan kecil
Burgoberbach
11.050 km
Klimaprüfkammer
FeutronKPK 200 Typ 3423/16
Hubungi
Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual kamar uji iklim KPK 200. Unit dalam kondisi sangat baik dan siap digunakan langsung.
Data teknis:
Tahun pembuatan: 2011
Volume nominal ruang uji: 280 dm³
Dimensi luar kamar uji: 1500 x 2040 x 1075 mm
Ukuran minimal masuk: 2060 x 1095 mm
Dengan motor kipas dan pintu dilepas: 1500 x 1940 x 925 mm
Ruang uji: 720 x 690 x 560 mm
Lebar bersih pintu: 720 x 690 mm
Jendela penglihatan berpemanas: 500 x 600 mm
Jumlah rak: 3 pcs
Nwodpfx Aey E Ilxeaajf
Beban maksimum yang diizinkan: 90 kg (merata pada 3 rak)
Beban maksimum per rak: 30 kg
Bahan ruang uji: Stainless steel Wst.-Nr. 1.4301
Iklan kecil
Nattheim
11.085 km
Pusat permesinan CNC
SCMMorbidelli X 200
Hubungi
Kondisi: bekas, Tahun pembuatan: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 — Drilling and Milling Made for You!
Nwsdeywvldjpfx Aaasf
This CNC machining center comes equipped with a comprehensive range of accessories for milling and drilling, catering to every requirement in the processing of wood and similar materials.
Ø Powerful: Equipped with drilling spindles operating at 8,000 rpm. The technology features the toughest spindle available on the market, providing over 1,000 maintenance-free operating hours.
Ø Better equipped: Offers a wide variety of configuration options thanks to the multifunction table, allowing for optimal customization according to your needs.
Ø Easier programming: Simplified and more intuitive programming enabled by the integrated Cad-Cam module "MAESTRO CNC".
Ø User-friendly: The worktable is accessible at all times; the control cabinet and vacuum pump are integrated and, in the PRO SPACE configuration, there are no protective barriers.
Load-Bearing Structure
The load-bearing structure is built with an especially robust monolithic steel base, heavily ribbed and extremely rigid. The extra-wide support surface is specifically designed to provide the machine with outstanding stability, ensuring lasting precision under any working conditions without requiring floor anchoring.
The base forms a large and solid support for the movable gantry: the work unit is thus provided with a balanced, stable, and durable backing, resilient to heavy-duty operation, ensuring higher quality performance and increased accuracy.
The movable portal is a solid, single piece anchored on both sides of the base and runs on premium-grade prismatic guides with recirculating ball carriages. Dual motorization along the X-axis guarantees peak performance even in demanding operational environments.
Movement of the lower mobile unit (X-axis) and the work unit along the mobile unit’s beam (Y-axis) is driven via helical toothed rack and pinion, delivering higher tooth-to-tooth thrust for greater acceleration and increased speed along the X and Y axes. The specially designed helical gearing minimizes mechanical wear and provides quieter operation.
The vertical Z-axis is powered by a ball screw, ensuring perfect balance under dynamic loads and accommodating high acceleration and deceleration rates.
The main milling unit is directly coupled to the Z-axis carriage, ensuring outstanding finish quality by eliminating vibrations completely.
Movement along the X-Y-Z axes is achieved by “brushless” motors powered by static inverters, delivering:
- Reduced processing times through improved acceleration
- Enhanced positioning accuracy thanks to high-resolution encoders
- No zeroing procedures required after startup due to absolute encoders
- Minimal maintenance, as the “brushless” system has no brushes
Axis movements and all main machine operations are managed via an industrial NS module with digital data transmission.
Kami memudahkan pencarian untuk Anda: "gastl rg 200"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Gastl Rg 200 (18.116)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan



























































































































































































































































