Beli Gildemeister Ctv 160 bekas (237)

Kondisi: bekas, Tailstock, Counter Support for Dividing Head, Indexing Device -Tailstock source: from a Gildemeister lathe -Center height: 270 mm -Quill: electrically driven -Foot switch -Taper: Morse Taper 5 (MT5) -Quantity: 1 tailstock available Kodpfedkru Hsx Aciodn -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 68.410 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4903-0234, jumlah spindel: 6, kecepatan spindel (maks.): 2.700 rpm, Diameter batang (maks.): 42 mm, diameter pembubutan: 42 mm, Perlengkapan: pengumpan batang, Submitting a bid implies a binding commitment to collect the item(s) on schedule by 15/11/2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Maximum turning diameter: 42 mm Spindle speed (main spindles): 500–2,700 rpm Ksdpsxnxnyjfx Acijdn Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. across flats for hex stock: 36 mm Max. cross-section for square stock: 29 mm Max. bar stroke per station: 130 mm Max. bar stroke over two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. stroke tool spindles: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Drive Motor Rated power: 22 kW Motor speed: 1,455 rpm Coolant tank capacity: 750 l Operating hours: 68,410 h EQUIPMENT Bar magazine (length approx. 3000 mm) Work benches Additional accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 40.724 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8018030323B, jumlah spindel: 6, kecepatan spindel (maks.): 2.700 rpm, Diameter batang (maks.): 42 mm, diameter pembubutan: 42 mm, Perlengkapan: pengumpan batang, The submission of a bid obligates the buyer to collect the item by the deadline of November 15, 2025! Kedjxnxkhopfx Aciedn The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. hexagonal bar size (across flats): 36 mm Max. square bar size (width across): 29 mm Max. bar stroke per station: 130 mm Max. bar stroke over two stations: 260 mm Max. stroke, radial slide: 52 mm Radial slide adjustment, fwd/rev: ±20 mm Max. stroke, axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, fwd/rev: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Main motor rated power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 40,724 h EQUIPMENT Bar loader (length: approx. 3,000 mm) Work tables Additional accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 57.860 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4903-0261, Bidding obligates the buyer to collect the machine on time by 15/11/2025! Kdedpfx Asxnxqbecien The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, year 2005: Listing ID A20302860 Gildemeister GM 42-6, year 2004: Listing ID A20303020 Gildemeister GM 42-6, year 2011: Listing ID A20303110 Gildemeister GM 42-6, year 2007: Listing ID A20303190 Gildemeister GM 42-6, year 2005: Listing ID A20303220 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. across-flats for hex stock: 36 mm Max. width across flats for square stock: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke across two stations: 260 mm Max. stroke of radial slide: 52 mm Radial slide adjustment, forward/back: ±20 mm Max. stroke of axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. stroke of tool spindles: 120 mm Adjustment, forward/back: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main drive Main motor rated power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 57,860 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Worktables Additional accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 69.287 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4903-0238, jumlah spindel: 6, kecepatan spindel (maks.): 2.700 rpm, Diameter batang (maks.): 42 mm, diameter pembubutan: 42 mm, Perlengkapan: pengumpan batang, Submission of a bid obliges the bidder to collect the machine(s) within the specified deadline, no later than 15.11.2025! The following machines are also being auctioned exclusively from the same location: Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Maximum turning diameter: 42 mm Kdodpfx Asxnxapscion Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar width across flats for hexagonal material: 36 mm Max. bar dimension for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. axial slide travel: 72 mm Maximum rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power main motor: 22 kW Speed main motor: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 69,287 h EQUIPMENT Bar loader (length: approx. 3,000 mm) Work tables additional accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 46.942 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4903-0208, jumlah spindel: 6, kecepatan spindel (maks.): 2.700 rpm, Diameter batang (maks.): 42 mm, diameter pembubutan: 42 mm, Perlengkapan: pengumpan batang, The submission of a bid constitutes an obligation to collect the machine(s) within the specified deadline, no later than 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Search ID A20302860 Gildemeister GM 42-6, Year 2011: Search ID A20303110 Gildemeister GM 42-6, Year 2007: Search ID A20303190 Gildemeister GM 42-6, Year 2005: Search ID A20303220 Gildemeister GM 42-6, Year 2007: Search ID A20303265 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides (side slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. across flats for hexagonal material: 36 mm Max. bar size for square material: 29 mm Max. bar stroke per station: 130 mm Max. bar stroke across two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Drive Motor Rated power, main motor: 22 kW Kjdsxnxgpopfx Aciedn Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 46,942 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 55.585 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4903-0266, jumlah spindel: 6, kecepatan spindel (maks.): 2.700 rpm, Diameter batang (maks.): 42 mm, diameter pembubutan: 42 mm, Perlengkapan: pengumpan batang, Submitting a bid obligates the buyer to collect the item by the deadline of 15/11/2025! The following machines are also exclusively for sale by auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. across flat for hexagonal material: 36 mm Max. side length for square material: 29 mm Max. bar feed per station: 130 mm Max. bar feed across two stations: 260 mm Max. radial slide stroke: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. axial slide stroke: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank volume: 750 L Operating hours: 55,585 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Kodpfx Asxnxm Aociedn Work tables Additional accessories

Kondisi: bekas, CNC control unit, numeric control, removed from GILDEMEISTER GDM 65/2A Kdsdoh Ecnaepfx Acisn GILDEMEISTER type Eltropilot EP20 GD-2A Year of manufacture: 1989 Order no.: 150 299 Serial no.: 0.854.183 Power connection: 220 VAC 50 Hz Rack with 20 module slots - 11 modules installed Dimensions (W x H x D): 480 x 260 x 220 mm Weight: approx. 7 kg The control came from a Gildemeister GDM 42/2A lathe. You can find additional components from Gildemeister under stock numbers: 60343, 60346, 60347

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, CNC Bubut GILDEMEISTER CTX 420 Linear 2007 Siemens 840 D Spesifikasi teknis: * Panjang pembubutan: 600 mm * Diameter pembubutan: 680 mm * Lubang spindle: 79 mm Kdedpfx Acow Slfbsion * Kecepatan putar spindle: 5000 rpm * Daya spindle: 25 kW * Konveyor serpihan: Ya * Kecepatan putar variabel: 5000 rpm Spindle utama dengan kapasitas batang: Ø 65 mm Chuck self-centering Autoblock: Ø 250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Pusat pembubutan dan milling CNC GILDEMEISTER TWIN 500 Linear Tahun produksi: 2002 Kontrol Siemens Ksdpfx Acew Tarfjijdn Data teknis: Diameter ayun: 610 mm Diameter pembubutan: 610 mm Panjang pembubutan: 1870 mm Daya penggerak: 69 kW Kecepatan putar: 3200 min-1 Torsi poros C: 650 Nm Spindel utama kiri Diameter chuck: 250-500 mm Diameter batang maks.: 102 mm Slider atas Kecepatan rapid traverse X/Y/Z: 45/24/70 m/menit Lintasan slider X1/Y: 1605/105 mm Spindel bubut/milling HSK 63A Kecepatan spindel maks.: 12.000 rpm Sumbu B Rentang ayun B1: 120° Resolusi: 0,001° Majalah alat Jumlah alat: 40 Panjang alat / jumlah maks.: 350/40 mm

Kondisi: sangat baik (bekas), Boring bar head, spindle head, boring head, parting boring head, parting head, spindle boring head, counterboring head, spindle tool Kdodpsb A Hvaofx Acien - Taper: SK50 - Tool holder: M20 - Price: for both holders - Weight: 16 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 11.600 h, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 107 mm, kecepatan spindel (maks.): 4.000 rpm, berat keseluruhan: 10.000 kg, model controller: Siemens 810D, Perlengkapan: konveyor serpihan, en Kdsdpoymn Ibjfx Acisn

Kondisi: bekas, Tahun pembuatan: 1985, Core drilling diameter – max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofit and modernization by TBT _____ Drilling – solid drilling approx. 1 – 18 mm Kdjdpfjt Hwvajx Acisn Drilling – counterboring approx. 25 mm Drilling depth 320 mm Center height above bed/table 150 mm Travel of drilling slide max. approx. 500 mm Travel of positioning slide (linear guides) 500 mm Spindle center distance 125 mm Drilling feed/rapid traverse stepless approx. 35 – 1,000/7,000 mm/min Center distance between the spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive power of the complete machine approx. 33 kW – 400 V – 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump parts (Ø approx. 25 x 150 mm, hole approx. 5 mm) which are loaded via an inclined conveyor into a dual positioning station for correct orientation check, and then automatically and in pairs via a crosswise to the machine mounted loading portal (2 x double grippers) clamped in the machining zone between drilling bush holder and powered tailstock. After machining, the second pair of grippers takes over the workpieces and transfers them to a blow-off and drill breakage detection station. After successful inspection, the workpieces drop into transport containers. - The process programming and monitoring is handled by a SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated HF spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw spindle - Separate coolant oil system approx. 1,500 liters with various pumps and a sophisticated belt filter purification system - Separate hydraulic system approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate electrical and control cabinets, CE-marked Condition: good to very good – soon ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1991, Turning diameter: 42 mm Turning length: 250 mm Control system: Total power requirement: kW Machine weight approx.: t Space requirement approx.: m G I L D E M E I S T E R Universal 8-axis CNC lathe with bar feeder Model: GAC 42 Year of manufacture: 1991 Serial no.: 5.1096 Bar diameter: 42 mm Chuck diameter: 140 mm Spindle bore: 56 mm Spindle speeds (max. 485 Nm): 71 - 6,300 rpm The machine is equipped with 2 two-axis side cross slides, 2 one-axis side parting slides, and 1 two-axis turret slide. Turret slide X/Z travel (X5 / Z5): 40 / 274 mm Feed / rapid traverse: 5 / 15 m/min Feed force X / Z: 600 / 1120 daN Cross slide X/Z travel (X3/Z3, X4/Z4): 70 / 164 mm Feed / rapid traverse: 5 / 8 m/min Parting slide X travel (X1, X2): 70 mm Feed / rapid traverse: 5 / 8 m/min Spindle drive: 18 kW Total power consumption approx.: 25 kVA - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Features Kdedjt Hwz Aopfx Acien - GILDEMEISTER 8-axis CNC control type EPL 2 with color display, electronic handwheel, and all standard options: graphics, cycles, subprograms, parallel programming, etc. - 4 CNC side slides (2 with X/Z axes, 2 with X axis) with presettable quick-change toolholders, 20 mm tool shank (square) - Tool turret with 8 VDI 30 positions, 4 of which are driven for drilling, milling, and threading with driven tools - Rotating pick-off device (chuck diameter 80 mm) for rear-side machining using a linear toolholder mounted on the right bed side (max. 3 tools) - Hydraulic hollow clamping system with collet chuck - SAMECA hydrostatic bar feeder MONOSAM 45 - 2-circuit coolant system, BMF chip conveyor, lockable sliding door, various driven tool holders, operator's manual, and further accessories Thanks to the combination of the advantages of a turret with driven tools, rear-side machining, and 4 CNC side slides, this machine is highly versatile! Condition: good to very good - demonstration ready Delivery: ex stock - as inspected Payment: net - upon receipt of invoice We look forward to receiving your order. Further conventional and CNC lathes in stock – please inquire.

Kondisi: baik (bekas), Tahun pembuatan: 1989, jam operasional: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Kdjdpfx Aovr Eh Escien Feed range longitudinal & cross: 0.5 – 5,000 mm/min Rapid traverse longitudinal & cross: 9 m/min Main drive: 30 kW Dimensions of the machine with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT display General Description: CNC manual input control with programming via function and numeric keypad. All data entry in dialog with the screen. Integrated menu navigation and plaintext display of all functions. Control keypad, screen, and handwheel in a separate chip guard hood. The EPL control offers the following possibilities: Programs can be entered and modified without prior programming knowledge, directly by operator guidance through the EPL control. NC programs in ISO/EIA format can be entered and output via serial RS 232 interface, or entered directly by hand. Machining Cycles: Roughing cycles for longitudinal, facing, and contour turning, also with excess allowance. Threading. Undercuts according to DIN 509 Form E and F and DIN 76, and programmable grinding allowances. Axial and radial grooves to DIN 471 and 472, also with bottom finishing. Radii at 90° and chamfers at 45°. Automatic tool nose compensation for cycles, undercut, groove, radius, and chamfer. Programming: Block-oriented, metric/inch, diameter input in absolute mode, radius in incremental mode, full circle programming, subprogram technology with skip levels for program sections. Zero point offset. Operating mode selection via menu. Program input and output: Dialog via menu with operator guidance or direct dialog input. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged-chip conveyor • 12-position VDI 40 tool turret, 6 standard tool positions + 6 driven tool positions • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: baik (bekas), Multi-spindle automatic lathe (6 spindles) Max. bar diameter: 16 mm Guide tubes: 4,000 mm Kdodpfx Acep Dux Tjion Chip conveyor

Kondisi: baik (bekas), Centre height: 260 mm Tailstock taper: MT 4 Quill stroke: 100 mm This hydraulic tailstock originates from a GILDEMEISTER CT 40 CNC slant-bed lathe. Image similar. Kedoralkmopfx Acisdn Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Kondisi: bekas, Tahun pembuatan: 2011, Turning machines Travel X: 270 mm Travel Y: 120 mm Travel Z: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Max. torque: 680 Nm Speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Kedpewwv Ifefx Acijdn Chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal unit Conveyor belt for removal of workpieces from the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extractor Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, saluran batang: 60 mm, model controller: Siemens 840D Powerline, kecepatan spindle sekunder (maksimal): 5.000 rpm, DETAIL TEKNIS Lubang spindle: 65 mm Diameter batang yang bisa dilewati: 60 mm Kecepatan putaran spindle utama maks.: 5.000 rpm Kecepatan spindle lawan: 5.000 rpm DETAIL MESIN Kontrol: Siemens 840D Powerline Berat mesin: 3.500 kg PERLENGKAPAN Sumbu C Kdsdpfxeymw Iqs Acijn Magazin pengumpan batang IEMCA Master 880/33 HF (panjang batang hingga 3.200 mm) Suplai cairan pendingin KSS / unit pendingin Konveyor serpihan tipe sabuk engsel

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Main spindle: Max. bar capacity: 65mm, draw tube bore: 75mm, collet chuck diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5,000 rpm, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Sub-spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5,000 rpm, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis sub-spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal feed force (S1): 2,400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Workpiece discharge (UA-WA): max. discharge weight: 4daN, max. discharge diameter: 70mm. Total number of tool stations: 12, tool holder clamping diameter: 30mm, driven tool positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4,000/min): 2.9kW, CNC control: Siemens 840D, operator panel: ErgoLine, display: 19” TFT color, spindle count (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h powered on, 48,657h in production. Machine runs on cutting oil. Including documentation and FMB Turbo 8-80 XT 3200 bar feeder. On-site inspection possible. Kedpfjyln Ekjx Acisdn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Hello, I am offering for sale a renowned brand CNC LATHE: GILDEMEISTER CTX 400 V3 with driven tools and C-axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Kjdpjtpuh Aefx Acijdn Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of origin: Germany Year of manufacture: 2000 _ Machine specifications: - Turret: 12 stations for VDI 30 tool holders (every other station is driven) - Max spindle speed: 5000 rpm - Max turning length (Z-axis): 640 mm - Max turned diameter (X-axis): 290 mm - C-axis - Driven tools - BERG KH 200 spindle chuck - Max bar diameter: 65 mm – finished part catcher - Coolant system - Hydraulic tailstock - Chip conveyor - Spindle drive power: 21 kW - Technical documentation (DTR) - Machine weight: 5.2 tons _ WHY BUY MACHINES FROM PPM? - We have our own in-house and mobile service teams - Over 700 DMG machines sold - Machine commissioning at customer’s site available - Operator training and machine delivery included in the price - All our machines undergo a professional technical inspection – 100% ready for operation - Machine purchase available with installment payment plans and leasing options.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, EN001 Kodpfxstw U E Uo Acisdn

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, greeting I am offering for sale a renowned brand CNC LATHE, DMG GILDEMEISTER CTX 500 V3, featuring C-axis and driven tools. The machine is in excellent technical and visual condition. _ Kdodou Aauxjpfx Acijn Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 500 V3 Control system: HEIDENHAIN 3190 + TURN PLUS overlay for program generation Country of manufacture: Germany Year of manufacture: 1998 _ Machine specifications: - Turret: 12 stations for VDI 40 tool holders (every second position driven) - Max spindle speed: 3,500 rpm - C-axis - Driven tools - Max turning length in Z-axis: 1,150 mm - Max turning diameter in X-axis: 500 mm - BERG chuck on spindle, diameter 315 mm - Max bar diameter: 91 mm - Coolant system - Hydraulic tailstock – programmable - Chip conveyor - Spindle drive power: 31 kW - Technical documentation (DTR) - Machine weight: 9 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own service team – both stationary and mobile - We have sold over 700 DMG machines - Machine installation at the customer's site available - Operator training and delivery included in the price - All our machines undergo a professional technical inspection – ready for immediate operation - Machines can be purchased via installment plan or leasing.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 450 mm, panjang pembubutan: 1.000 mm, lubang spindel: 107 mm, kecepatan spindel (maks.): 3.050 rpm, kecepatan spindel (min.): 4 rpm, jarak gerak sumbu Z: 1.000 mm, gerak cepat sumbu X: 10 m/menit, pergerakan cepat sumbu Z: 15 m/menit, kecepatan rotasi (maks.): 3.050 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, cnc-drehmaschine-gildemeister-ctx600-en Kedpfx Ajyl Nutocisdn

Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, travel X/Z: 220mm/635mm, spindle speed: 5,000 rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool stations: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4,500kg. An on-site inspection is possible. Kdodpfx Acov Uqcgjisn