Beli Gildemeister Gmx bekas (238)

Kondisi: baik (bekas), Tahun pembuatan: 2003, panjang pembubutan: 1.505 mm, Turning and Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control system: Sinumerik Power line Technical Specifications: Main spindle ISM 90 drive power: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Magazine capacity: 120 slots Milling spindle tool holder: HSK 63 Counter spindle ISM 90 drive power: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed for driven tools: Number of turret stations: 12 Tool holder: VDI 40 Equipment: Ppedpfx Ajwzbq Tebuel - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D touch probe - Tailstock function for counter spindle - Automatic sliding doors

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 72.899 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07510001241, panjang pembubutan: 1.185 mm, diameter pembubutan: 640 mm, kecepatan spindel (maks.): 12.000 rpm, berat benda kerja (maks.): 150 kg, tinggi total: 3.040 mm, panjang total: 7.800 mm, lebar total: 4.100 mm, berat keseluruhan: 16.500 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Indicated spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - Slide travel X1: 550 mm - Slide travel Y1: 180 mm - Slide travel Z1: 1,185 mm - Slide travel B1: 240° - Slide travel X2: 180 mm - Slide travel Z2: 1,050 mm - Slide travel Z3: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse (Slide 1 X/Y/Z): 40/24/70 m/min - Rapid traverse (Slide 2 X/Z): 24/36 m/min - Rapid traverse (Slide 3 Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 - Including tool holders mounted on the turret - Including bar feeder, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Attention, the machine has the following defects: - The hydraulic unit is faulty and needs to be repaired - The Q2 axis (tool changer milling spindle) fails frequently - X2 axis (guideways) moves slightly skewed - Guideways and drives are worn according to the age Note: A vehicle with a 3,000 mm transport width is required for transportation! FCA D-58256 Ennepetal, loaded on truck at a date to be agreed at the end of February 2026. Ppjdpsyaqczefx Abuel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, We offer you the following: Manufacturer: DMG Gildemeister Model: GMX 250 linear Year of manufacture: 2006 Control: Siemens 840 D powerline Technical Specifications: Maximum turning diameter: 640 mm Turning length: 1,185 mm Draw tube inner diameter: 67 mm Travel paths: X1 axis: 550 mm Y axis: +/- 90 mm Z1 axis: 1,185 mm B axis: +/- 120° X2 axis: 180 mm Z2 axis: 1,050 mm Main spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Counter spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Milling spindle: Speed range: 0 – 12,000 rpm Indexing: 1° Tool holder: HSK63A Number of tool stations: 46 positions Turret: Number of tool holders: 12 positions Fixture: 40 mm Through-bore clamping device: Ø 67 mm Operating hours: approx. 92,100 h Spindle hours: approx. 47,800 h Technical features and accessories: - Main and counter spindle ISM 76 Psdpfx Absyfmibeujpl - C-axis and spindle brake, hydraulic - B-axis interpolating and with hydraulic clamping - Tool magazine with 4 additional loading stations - Absolute, direct measuring systems on all linear axes - Coolant tank 600 l with lift pump and level regulator - Coolant filtration with band filter, coolant pump 8 bar; 20 l/min - Chip conveyor - Preparation for work area suction - USB and Ethernet interface - Tool monitoring system, manufacturer Artis type CTM - Star turret with driven tools, including direct measuring systems - Counter spindle with partial through-bore clamping, c-axis and spindle brake (hydraulic), holding brake, and direct measuring system - Automatic sliding safety door - Coolant spray gun - Control cabinet lighting and socket - 4-color signal light - Tailstock function for the counter spindle - 2x three-jaw power chucks, manufacturer Forkardt 30QLC 250-72 - Turret-mounted steady rest, range 8–101 mm Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in technical data and specifications, as well as prior sale, are subject to change!

Kondisi: bekas, Tahun pembuatan: 2005, Swing diameter: 640 mm Turning length: 1,185 mm Control: SINUMERIK 840D Max. workpiece diameter: 640 mm Distance between spindle heads: 1,500 mm Slide I: X1 / Y1 / Z1 / B Travel X-axis: 550 mm Travel Y-axis: 180 mm Travel Z-axis: 1,185 mm B-axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Podsydfllspfx Abuepl Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00/11.00/7.50 kN Tool holder: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Number of tools in magazine: 46 Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free slots: 120 mm Max. tool weight: 6 / 10 kg Slide II: X2 / Z2 Travel X-axis: 180 mm Travel Z-axis: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (multi-station): 12 positions Tool holder DIN 69880 Ø40 Driven tool stations: 12 Driven tool speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm Slide III Z3 mm Travel Z-axis: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36.00 m/min Feed force Z-axis S6: 13.00 Nm Main spindle ISM90 Main spindle speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm Counter spindle speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm Total power requirement: 70.00 kW Machine weight approx.: 20.00 t Space requirements approx.: 8.50 x 4.50 x H3.10 m Machine features: SIEMENS SINUMERIK 840D control, main and counter spindle, chip conveyor, oil mist separator, DMG Automation WH10top. Main spindle ISM90: Hollow clamping device, C axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow clamping device, C axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Workpiece transfer device with integrated conveyor belt, automatic safety cover, differential pressure clamping. With pump skid for coolant: - Pump 1: 17 l/min at 80 bar - Pump 2: 20 l/min at 8 bar - Pump 3: 40 l/min at 20 bar Without coolant system, previously connected to central system. Accessories: Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Pusat pembubutan dan milling CNC GILDEMEISTER TWIN 500 Linear Tahun produksi: 2002 Kontrol Siemens Data teknis: Diameter ayun: 610 mm Diameter pembubutan: 610 mm Panjang pembubutan: 1870 mm Daya penggerak: 69 kW Kecepatan putar: 3200 min-1 Torsi poros C: 650 Nm Spindel utama kiri Diameter chuck: 250-500 mm Diameter batang maks.: 102 mm Slider atas Kecepatan rapid traverse X/Y/Z: 45/24/70 m/menit Lintasan slider X1/Y: 1605/105 mm Spindel bubut/milling Pjdpfew Tarfjx Abuspl HSK 63A Kecepatan spindel maks.: 12.000 rpm Sumbu B Rentang ayun B1: 120° Resolusi: 0,001° Majalah alat Jumlah alat: 40 Panjang alat / jumlah maks.: 350/40 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.185 mm, diameter pembubutan: 640 mm, kecepatan spindel (maks.): 4.000 rpm, diameter pembubutan di atas alas geser: 640 mm, torsi spindle sekunder (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle noses: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° Feed rate X-axis: 0 - 40,000 mm/min Feed rate Y-axis: 1 - 24,000 mm/min Feed rate Z-axis: 1 - 70,000 mm/min Feed rate B-axis: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free spaces: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm Feed rate X-axis: 1 - 24,000 mm/min Feed rate Z-axis: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool interface: DIN 69880 Ø40 Driven tools - quantity: 12 Speed: 1 - 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Feed rate Z-axis: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Podpfx Abswyvc Ueujpl Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: through-hole clamping system, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping system, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pickup system with integrated conveyor belt Automatic safety hood Differential pressure clamping With pump station for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece gripper for turret

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.185 mm, diameter pembubutan: 640 mm, kecepatan spindel (maks.): 4.000 rpm, diameter pembubutan di atas alas geser: 640 mm, torsi spindle sekunder (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle noses: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° Feed rate X-axis: 0 - 40,000 mm/min Feed rate Y-axis: 1 - 24,000 mm/min Feed rate Z-axis: 1 - 70,000 mm/min Feed rate B-axis: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free spaces: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm Feed rate X-axis: 1 - 24,000 mm/min Feed rate Z-axis: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool interface: DIN 69880 Ø40 Driven tools - quantity: 12 Speed: 1 - 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Feed rate Z-axis: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Ppsdpfxoxf A Ede Abusl Main spindle ISM90: through-hole clamping system, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping system, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pickup system with integrated conveyor belt Automatic safety hood Differential pressure clamping With pump station for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece gripper for turret

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 57.588 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07500000781, kecepatan spindel (maks.): 12.000 rpm, lubang spindel: 79 mm, diameter ayun di atas peluncur melintang: 640 mm, diameter spindel: 120 mm, tinggi pusat: 1.343 mm, jarak antara pusat: 1.930 mm, TECHNICAL DETAILS Centre height: 1,343 mm Centre distance: 1,930 mm Max. swing diameter: 640 mm Work spindle Spindle nose to DIN: Flat flange Size: 170 h5 Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm Max. chuck diameter: 200 / 250 / 315 mm Max. torque 100/40% duty cycle: 270 / 390 Nm Infinitely variable speed range: 20 to 4,000 / 12,000 rpm Saddle Tooling system: Disc turret / tool spindle Number of bed slides: 3 Number of cross slides: 2 Longitudinal travel: z₁ = 1,585 mm / z₂ = 1,400 mm / z₃ = 1,500 mm Cross travel: x₁ = 550 mm / x₂ = 180 mm Tailstock Psdoww Hafopfx Abujpl Quill taper: MT5 Max. tailstock offset, manual / automatic: 1,500 mm Feed rates Rapid traverse, longitudinal: Z₁ = 65 / Z₂ = 40 / Z₃ = 40 m/min Rapid traverse, cross: X₁ = 40 / X₂ = 24 m/min Feed force longitudinal: Z₁ = 7.5 kN / Z₂ = 11 kN / Z₃ = 11 kN Feed force cross: X₁ = 7.5 kN / X₂ = 9 kN MACHINE DETAILS Year of manufacture: 2005 Length: 8.9 m Width: 4.5 m Height: 3.1 m Weight: 24,000 kg Power-on hours: 102,104 h Spindle hours: 57,588 h

Kondisi: bekas, Tahun pembuatan: 2004, jam operasional: 11.022 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07520000211, panjang pembubutan: 1.070 mm, diameter putar di atas sled silang: 400 mm, diameter pembubutan: 560 mm, daya motor spindle: 37 W, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 79 mm, jarak pergerakan sumbu X: 485 mm, jarak lintasan sumbu Y: 160 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a coolant filtration system as well as a comprehensive selection of HSK 63 - A tools, approximately 40 pieces. Additionally, a Berg chuck is included, as shown in the photos. The machine is being sold due to a lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading can be carried out without any issues. Pjdpfjug Uc Nox Abuepl

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A CNC twin-spindle turning and milling center by Gildemeister, including a coolant system (KSS-Anlage) and chip conveyor, is available. Swing diameter over bed: 640 mm, machining diameter: 400 mm, center distance: 1930 mm, travel X/Z: 550 mm / 1585 mm, Y-axis travel: +/-110 mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: Power: 36 kW / 45 kW, speed: 4,000 rpm, torque: 600–730 Nm, spindle bore: 107 mm. Milling spindle: speed: 12,000 rpm, power: 13.2 kW / 22 kW, torque: 100 Nm. Tool stations: 60, turret: 12-position star turret SW 380. Machine dimensions (X/Y/Z): approx. 9300 mm / 4600 mm / 3100 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D powerline. Documentation available. Inspection on site is possible. Psdpfx Abewmdv Aeuspl

Kondisi: bekas, Gildemeister GMX250 Ppjdpfx Abjx Up A Dsusl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jam operasional: 38.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 325202, panjang pembubutan: 305 mm, diameter pembubutan: 210 mm, kecepatan rotasi (maks.): 5.000 rpm, saluran batang: 42 mm, model controller: Heidenhain Elektro Pilot 1190, DETAIL TEKNIS Diameter putar di atas tempat tidur: 440 mm Diameter putar di atas dudukan: 210 mm Panjang pembubutan: 305 mm Diameter lubang batang: 42 mm Kecepatan putar: 5.000 rpm Revolver: 12 posisi Sistem pemasangan alat: VDI 20 DETAIL MESIN Kontrol: Heidenhain Elektro Pilot 1190 Dimensi & Berat Dimensi (P x L x T): 2.800 x 1.651 x 1.771 mm Berat mesin: sekitar 3.000 kg Jam operasi: sekitar 38.000 jam PERLENGKAPAN Sistem pendingin cairan Senter tetap Dokumentasi Ppsdpfx Aeyfgttebuel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jam operasional: 17.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 305 mm, kecepatan spindel (maks.): 5.000 rpm, diameter ayun di atas peluncur melintang: 440 mm, saluran batang: 42 mm, model controller: Heidenhain Elektro Pilot 3190, RINCIAN TEKNIS Diameter putar di atas ranjang: 440 mm Diameter putar di atas eretan: 210 mm Panjang pembubutan: 305 mm Lubang batang: 42 mm Podpfsycu A Rex Abuopl Kecepatan putar: 5.000 rpm Revolver: 12 posisi Bertenaga: 6 posisi Mounting alat: 20 VDI RINCIAN MESIN Kontrol: Heidenhain Elektro Pilot 3190 Dimensi & Berat Ukuran mesin (P x L x T): 2.800 x 1.651 x 1.771 mm Berat mesin: sekitar 3.000 kg Jam kerja: sekitar 17.000 jam PERLENGKAPAN Konveyor serbuk Sumbu C Alat bertenaga Penangkap benda kerja Dudukan tailstock Dokumentasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 19.300 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 750 mm, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 185 mm, jarak gerak sumbu Z: 750 mm, diameter ayun di atas peluncur melintang: 320 mm, RINCIAN TEKNIS Diameter putar di atas pelana: 320 mm Diameter putar di atas dudukan: 150 mm Panjang pembubutan: 750 mm Perjalanan sumbu X: 185 mm Perjalanan sumbu Z: 750 mm Lubang batang: 52 mm Kecepatan spindle: 4.000 rpm Kepala spindle: 55027/A6 DIN Daya spindle: 9 kW Rapid traverse sumbu X: 10 m/menit Rapid traverse sumbu Z: 8 m/menit Diameter pinol tailstock: 70 mm Stroke pinol tailstock: 120 mm Konektor pinol tailstock: MK 5 DETAIL MESIN Kontrol: Heidenhain Manuel Plus Dimensi & Berat Dimensi mesin: 2.450 x 1.668 x 1.825 mm Berat mesin: sekitar 2,0 t Jam operasi: sekitar 19.300 jam PERLENGKAPAN Chuck 3 rahang Tailstock Multifix ukuran B Pjdpjycuvkjfx Abuepl Dokumentasi

Kondisi: siap digunakan (bekas), jam operasional: 28.339 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 450 mm, diameter pembubutan: 300 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, model controller: Siemens 840D ShopTurn, RINCIAN TEKNIS Diameter putar: 300 mm Panjang putar: 450 mm Perjalanan sumbu X: 160 mm Rentang kecepatan spindle utama: 5.000 rpm Rentang kecepatan spindle lawan: 5.000 rpm Diameter batang: 65 mm Tipe dudukan alat: VDI 30 Stasiun alat berpenggerak: 12 Ppjdpfx Asycupqsbuel Kecepatan alat berpenggerak: 5.000 rpm Kecepatan rapid feed sumbu X: 60 m/menit Kecepatan rapid feed sumbu Z: 45 m/menit RINCIAN MESIN Kontrol: Siemens 840D ShopTurn Dimensi & Berat Ruang dengan konveyor serbuk: 6.895 x 2.284 x 1.885 mm Berat mesin: sekitar 4,3 t Jam Operasi Jam nyala: 59.643 jam Jam spindle: 28.339 jam PERLENGKAPAN Konveyor serbuk Spindle lawan Chuck collet Hainbuch 65 mm Chuck collet Hainbuch 42 mm Part catcher Sabuk pengangkut Sumbu C Alat berpenggerak Dokumentasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, saluran batang: 60 mm, model controller: Siemens 840D Powerline, kecepatan spindle sekunder (maksimal): 5.000 rpm, DETAIL TEKNIS Lubang spindle: 65 mm Diameter batang yang bisa dilewati: 60 mm Kecepatan putaran spindle utama maks.: 5.000 rpm Kecepatan spindle lawan: 5.000 rpm DETAIL MESIN Ppedpfsya Ecvox Abujl Kontrol: Siemens 840D Powerline Berat mesin: 3.500 kg PERLENGKAPAN Sumbu C Magazin pengumpan batang IEMCA Master 880/33 HF (panjang batang hingga 3.200 mm) Suplai cairan pendingin KSS / unit pendingin Konveyor serpihan tipe sabuk engsel

Kondisi: bekas, Tahun pembuatan: 2003, Data Teknis: Diameter Putar: 680 mm Jarak antara senter: 1000 mm Kecepatan putar: 2800 rpm Chuck: ø300 mm Dimensi (perkiraan): 5560 x 2400 x 2130 mm Berat (perkiraan): 10.000 kg Perlengkapan: Ppedpfxeyfnqgo Abujl - Kontrol: Heidenhain CNC Pilot 4290 - Revolver 12 posisi VDM 40 - Sumbu C

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, CNC – Pusat Bubut & Milling Gildemeister CTX Beta 1250 4A dengan Sinumerik 840D Shopturn Tahun pembuatan: 2012 Jam operasi program: sekitar 20.000 jam OPSI PEMBENTUKAN GIGI DIUNLOCK Data teknis: Kecepatan spindle utama: Daya penggerak: 32 KW ISM 102 Kecepatan counter spindle: Daya penggerak: ISM 76 Sumbu Y pada kereta 1 Alat bertenaga 1x12 pada kereta 1+2 Paket bar feeder Gripper pengambil benda kerja dapat digunakan pada spindle utama dan counter spindle Sistem pendingin Konveyor chip Pjdpfx Aoyfcrrjbujpl Bar feeder pendek IRCO MUK

Kondisi: bekas, Tahun pembuatan: 1995, The machine is being sold for parts / as spare parts... CNC lathe manufacturer: GILDEMEISTER Model: CTX 600, year 1995 Forkardt chuck, 315 mm Tool turret Tailstock Steady rest Headstock Guideway covers and sheet metal panels Motors Machine is for sale in individual components... Ppjdpfxsnximuo Abujl Please let us know which parts you need and we will provide you with an offer.

Kondisi: baik (bekas), Tahun pembuatan: 1985, CNC lathe Manufacturer: GILDEMEISTER Type: N.E.F. 1020 Year: 1985 Control: EPL 2 Turning diameter over bed: 1,020 mm Ppsdpeqc Ul Ajfx Abujl Turning diameter over cross slide: 600 mm Turning length: 3,000 mm Spindle speeds: 5 – 1,120 rpm Motor power: 30 kW Spindle bore: 128 mm Tool turret: Parat size 4 with 10 holders Faceplate: 900 mm, steady rest, boring block, chip conveyor, complete machine documentation and parameter sets available. Machine disassembled and in storage. Total weight approx. 12,000 kg. For further technical details, please refer to the data sheets.

Kondisi: bekas, Tahun pembuatan: 1995, Gildemeister CTX-200 – CNC Lathe - Gildemeister/DMG CNC control - 3-jaw chuck Ø 140 mm - 12-position tool turret with driven tools - Work area lighting - Chip conveyor - 10,810 operating hours - Includes various tools - Includes operating manuals and documentation - Year of manufacture: 1995 Pedjxy R Uiepfx Abuspl Technical Data Working area: - Max. swing diameter over bed cover: 440 mm - Max. swing diameter over cross slide cover: 210 mm - Cross travel (X-axis): 160 mm - Longitudinal travel (Z-axis): 350 mm Spindle: - Spindle head Ø: 120 mm h5 - Spindle head Ø at front bearing: 85 mm - Spindle bore: 56 mm - Chuck diameter: 140 mm Main drive: - Drive power 100/50% duty cycle: 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 – 5,000 rpm Feed drive: - X-axis feed force: 200 daN - Z-axis feed force: 300 daN - X-axis rapid traverse: 12 m/min - Z-axis rapid traverse: 16 m/min - Measuring system: Incremental encoder Tool turret: - Universal disc turret, automatic indexing with directional logic - Number of tool stations: 12 - Tool holder, cylindrical shank (DIN 69880): 20 mm - Turret indexing time per station (30°): 0.48 s Universal disc turret with driven tools: - Number of tool stations: 12 - Max. number of driven tools: 12 - Max. clamping diameter for driven tools: 12 mm - Drive power 100/50% duty cycle: 2.5 / 3.0 kW Tailstock: - Quill diameter: 50 mm - Quill stroke: 120 mm - Quill taper: MT 3 - Max. quill pressure: 300 daN Machine dimensions: - Dimensions with chip conveyor (WxHxD): 3930 x 1690 x 1651 mm - Weight without chip conveyor: 2,950 kg Noise emission value: - Workstation-related continuous sound pressure level: 77 dB(A)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 25 rpm, kecepatan spindel (maks.): 500 rpm, lubang spindel: 79 mm, jarak pergerakan sumbu X: 220 mm, jarak gerak sumbu Z: 635 mm, gerak cepat sumbu X: 20 m/menit, pergerakan cepat sumbu Z: 24 m/menit, diameter luar chuck: 200 mm, hidung spindel: 170 h5, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin berasal dari pemilik pertama (instansi pemerintah) dan sangat lengkap. CTX 400 ini tersedia di lokasi kami dan dapat dilihat dalam kondisi beroperasi apabila diinginkan. Mesin ini secara standar dilengkapi dengan: - Konveyor serbuk sisa (chips) - Instalasi ekstraksi asap oli IFM - Kontrol TurnPlus Ppodpfx Absydpdxjuel - Sistem collet untuk 185E dan chuck 3-jaw KH 200/68 dengan rahang tambahan - Set konversi untuk collet 173E - Kopling pembatas beban untuk sumbu X dan Z - Pedal kaki ganda (chuck + tailstock) - Dokumentasi asli Gildemeister dan Heidenhain - Sekitar 20 holder VDI-30, termasuk 2 unit penggerak

Kondisi: baik (bekas), Tahun pembuatan: 2008, panjang pemakanan sumbu X: 575 mm, panjang umpan sumbu Y: 90 mm, panjang umpan sumbu Z: 300 mm, L.-Nr. 3.2-115 1 gebrauchte CNC-Drehmaschine GILDEMEISTER Modell CTV 160, Baujahr 2008 1 used CNC lathe GILDEMEISTER type CTV 160, year of manufacture 2008 Siemens 840D Steuerung 3-Backenfutter Späneförderer Kühlmitteleinrichtung Siemens 840D control 3-jaw chuck Chip conveyor Psdpsubvv Tsfx Abuspl Coolant equipment Technische Daten / Technical details: Drehdurchmesser / Turning diameter: 160 mm X-Achse / X-axis: 575 mm Z-Achse / Z-axis: -- mm Y-Achse / Y-axis: 300 mm (+-90 mm) Drehzahlbereich / Spindle speed range: 6000 UpM / rpm Gewicht der Maschine ca. / Weight approx.: 6000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich – Technical data, accessories, and description of the machine are not binding.

Kondisi: bekas, Tahun pembuatan: 2006, kecepatan spindel (maks.): 5.000 rpm, lebar total: 45.000 mm, panjang total: 19.900 mm, tinggi total: 23.000 mm, jarak pergerakan sumbu X: 165 mm, jarak lintasan sumbu Y: 80 mm, panjang batang: 600 mm, Gildemeister Sprint 65 Linear CNC Lathe (with 2nd spindle, 3 turrets, and Y-axis) Spindle bore diameter: 65 mm Spindle speed: 5,000 rpm Pjdpfx Asyddv Ajbujpl Spindle motor: 25/20 kW Counter spindle speed: 5,000 rpm X-axis travel: 165 / 165 / 165 mm Y-axis travel: 80 mm Z-axis travel: 220 / 150 / 650 mm W-axis movement (counter spindle to main spindle): 690 mm C-axis indexing: 0.0001° Number of turrets: 3 Number of tools per turret: 12 (3x 12) Tool holder: VDI 30 Bar loader: LNS Quick Load Servo 65 If you have any questions about the machine, or to schedule a viewing appointment, please feel free to contact us by phone or email. Please also have a look at our other listings to get a comprehensive overview of our current inventory.

Kondisi: bekas, Tahun pembuatan: 2006, kecepatan spindel (maks.): 5.000 rpm, lebar total: 45.000 mm, panjang total: 19.900 mm, tinggi total: 23.000 mm, jarak pergerakan sumbu X: 165 mm, jarak lintasan sumbu Y: 80 mm, panjang batang: 600 mm, Gildemeister Sprint 65 Linear CNC Lathe (with 2nd spindle, 3 turrets, and Y-axis) Spindle bore diameter: 65 mm Ppodpfxeyddvvs Abuel Spindle speed: 5,000 rpm Spindle motor: 25/20 kW Counter spindle speed: 5,000 rpm X-axis travel: 165 / 165 / 165 mm Y-axis travel: 80 mm Z-axis travel: 220 / 150 / 650 mm W-axis movement (counter spindle to main spindle): 690 mm C-axis indexing: 0.0001° Number of turrets: 3 Number of tools per turret: 12 (3x 12) Tool holder: VDI 30 Bar loader: LNS Quick Load Servo 65 If you have any questions about the machine, or to schedule a viewing appointment, please feel free to contact us by phone or email. Please also have a look at our other listings to get a comprehensive overview of our current inventory.