Beli Vertikal Mesin Bubut bekas (76.865)

Kondisi: bekas, Tahun pembuatan: 2014, 2 vertical turning machines (tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL DATA FOR VL 3 MACHINE (Subject to errors) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-axis travel: 400 mm Z-axis travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange as per DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum speed: 7,500 rpm MAIN DRIVE AC asynchronous motor (40/100% duty cycle): 25/16 kW Full power from spindle speed (100% duty cycle): 1,800 rpm Torque (40/100% duty cycle): 134/85 Nm FEED DRIVE Rapid traverse speed, X: 60 m/min Rapid traverse speed, Z: 30 m/min Feed force in X and Z: 5 kN Ball screw diameter X/Z: 40 mm TURRET Cylinder shank holder DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT as per VDE 0113 Operating voltage: 400 V Control voltage DC: 24 V / AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS AND WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides for the X-axis, located outside the working area. PORTAL SLIDE INCLUDING SLIDEWAY GUIDES Mounting for motor spindle AC synchronous drives for X- and Z-axes Encapsulated linear measuring systems. Resolution of all linear axes: 0.001 mm. Absolute measurement. Rapid traverse speed: X-axis: 60 m/min Z-axis: 30 m/min 1 MOTOR SPINDLE size 5, DIN 55026 Max. speed: 7,500 rpm Power (40/100% duty cycle): 25/16 kW Torque (40/100% duty cycle): 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRAL OIL SUPPLY for lubricating ball screws and roller guides. COOLING UNIT The cooling unit controls the machine’s thermal balance. Motor spindle, tool turret, and control cabinet are kept at ambient temperature. TOOLING SYSTEM 1 TURRET WITH 12 POSITIONS with tool bores ø40 DIN 69880. Shortest indexing time with electric drive. Cooled for consistent accuracy. Internal coolant supply to the tool in machining position. WORKPIECE STORAGE AND TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEED Storage capacity: 27 workpieces with ø30–85 mm or 18 workpieces with ø30–130 mm Max. workpiece height: 100 mm. Loading height: 1,020 mm. Chain indexing belt with prism supports. The workpieces are NC-positioned for pick-up by the clamping device. The pick-up spindle grabs the blanks from the conversion-free storage and transport belt. COOLANT AND CHIP DISPOSAL SYSTEM 1 COOLANT SUPPLY UNIT with integrated coolant tank, Capacity approx. 300 L, coolant filter. Coolant pump output approx. 80 L/min at 7 bar. Gedsytn Emopfx Ah Rsbi 1 CHIP CONVEYOR Chip discharge height 1,250 mm, hinged belt design. 1 EMULSION MIST EXTRACTION from working area ADDITIONAL EQUIPMENT AND UPGRADES WORKPIECE STORAGE AND TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND TURNING STATION OP20 COOLANT AND DISPOSAL SYSTEM 1 FLUSHING NOZZLES Working area: 2x, main body: 1x. HYDRAULICS AND PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with attachment 1 BLOW-OFF FOR PICK-UP UNIT – with 2 nozzles – WITHOUT maintenance unit (see MAINTENANCE UNIT FOR COMPRESSED AIR)

Kondisi: siap digunakan (bekas), TVM 450/5 Exceptional vertical machining and turning center capable of handling extremely large workpieces. Both the internal and external diameters of the workpieces can be machined! The machine consists of a fixed external column and a movable internal column. Turntable: - Outer diameter: 6,300 mm - Inner diameter: 3,000 mm - Maximum workpiece diameter: 9,800 mm - Minimum workpiece diameter: 2,220 mm - Maximum table load: 300 tons - Rotational speed: 0.08 – 27 rpm - Rotational speed during turning/milling: up to 4 rpm Fixed External Column: Gbsdpfx Ajyr Tgmsh Rji - Ram size: 550 x 550 mm - Spindle diameter: 304.8 mm - ISO 60 – 37 kW at spindle - Maximum external turning/milling height: 8,700 mm - Minimum external turning/milling height: 700 mm - Vertical travel: 8,000 mm - Horizontal travel: 2,030 mm Movable Internal Column: - Ram size: 280 x 280 mm - Max. internal turning/milling diameter: 5,180 mm - Min. internal turning/milling diameter: 3,048 mm - Max. internal turning/milling height: 5,800 mm - Min. internal turning/milling height: 615 mm - Vertical travel: 5,800 mm - Horizontal travel: 1,120 mm Spindle speeds: 1.2 – 601 rpm Total power: 250 kW 5-axis CNC control

Kondisi: baik (bekas), Tahun pembuatan: 1990, UNTUK DIJUAL: Mesin Bubut Vertikal BERTHIEZ TFM 160 N (Rekondisi) Deskripsi: Dijual mesin bubut vertikal berperforma tinggi merek Perancis BERTHIEZ, model TFM 160 N. Mesin acuan ini terkenal karena kekakuan yang luar biasa dan sangat ideal untuk pemesinan benda kerja berbentuk lingkaran berdiameter besar dan berat. Riwayat & Perawatan: Asal: Made in France Gbodpfx Ahsyr Irqo Rei Kapasitas Teknis (Standar Berthiez TFM 160): Diameter meja: 1.600 mm Diameter pembubutan maksimal: sekitar 2.000 mm Tinggi maksimal di bawah traverse: sekitar 1.500 mm Berat maksimal yang diizinkan di atas meja: sekitar 10 hingga 15 ton Tipe: Mesin bubut vertikal CNC (kontrol NUM).

Kondisi: bekas, Tahun pembuatan: 2017, 1 Godpoyruu Sofx Ah Rsbi

Kondisi: bekas, Tahun pembuatan: 2020, Maximum turning diameter: 3,800 mm Spindle flange diameter: 1,900 mm Maximum swing diameter: 3,800 mm Control: Siemens 840 D sl Speed range – main spindle max.: 100 rpm Drive power – main spindle: 200 kW Max. torque: 67,000 Nm Gear ratio: 1:30 Tool holder: Capto C8 Swivel range B-axis: 0–270° Speed range – driven tool positions max.: 6,000 rpm Max. torque (driven tool): 120 Nm Tool holder: Capto C8 Number of tool stations: 41 positions Max. tool weight: 20 kg Max. tool length: 400 mm Max. tool diameter: 120 mm Chain pitch: 125 mm Tool holder: Capto C8 Number of tool stations: 25 positions Tool diameter with full tooling: 150 mm Max. tool weight: 20 kg Max. tool length: 400 mm X-axis 1: 2,800 mm X-axis 2: 3,200 mm Z-axis: 1,000 mm Rapid traverse X: 32 m/min / Z: 20 m/min Feed force X/Z: 22 kN Total connected load: 280 kVA Machine weight approx.: 155 t Space requirement approx.: 10.4 x 6.3 x 5.7 m CNC Vertical Turning Machine PITTLER – PV 4000 - Control upgrade/software: SINUMERIK 828D/840D SL ProgramSYNC software option - 12-jaw compensating chuck by RÖHM - Retractable step grates - Coolant recirculation - Coolant temperature control - Oil skimmer - SIEMENS Safety Integrated Gbsdpfxoyrhl Dj Ah Rei - Network interface/data transmission DNC option - Remote diagnostics for the NC section - Teleservice for integrated PLC of Sinumerik 840 D - Ethernet port in control cabinet - Variable speed range to avoid vibrations - Air cleaner with electrostatic precipitation - Touch probe for in-process workpiece measurement - Walk-in working area

Kondisi: bekas, Tahun pembuatan: 2021, Max. turning diameter: 2,800 mm Spindle flange diameter: 1,100 mm Max. swing diameter: 3,000 mm Control: Siemens 840 D sl Main spindle speed range: max. 230 rpm Main spindle drive power: 206 kW Max. torque: 53,000 Nm Tool holder: Capto C8 Swiveling range B-axis: 0 - 270° Driven tool speed range: max. 6,000 rpm Max. torque driven tools: 120 Nm Tool holder: Capto C8 Number of tool positions: 41 pos. Max. tool weight: 20 kg Max. tool length: 400 mm Tool diameter at full capacity: 150 mm Godpfx Ajyrhlwsh Robi Tool holder: Capto C8 Number of tool positions: 25 pos. Tool diameter at full capacity: 150 mm Max. tool weight: 20 kg Max. tool length: 400 mm Tool holder: Capto C8 X-axis 1: 2,700 mm X-axis 2: 2,700 mm Z-axis (2x 1,000 mm) Rapid traverse X: 40 m/min / Z: 24 m/min Feed force X/Z: 22 kN Total power requirement: 200 kVA Machine weight approx.: 120 t Space requirement approx.: 10.4 x 6.3 x 5.7 m CNC vertical turning machine PITTLER - PV 2500 - Control extension / software: SINUMERIK 828D/840D SL ProgramSYNC software option - 12-jaw compensating chuck RÖHM - Retractable tread grids - Coolant circulation - Coolant climatization - Oil hose skimmer - SIEMENS Safety Integrated - Network interface / data transmission DNC option - Variable speed range to avoid vibrations - Air cleaner, electrostatic separator - Probe for in-process workpiece measurement - Walk-in work area

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7-41 5157 40, The Pittler PCC vertical turning machine, machine no. 7-41 5157 40, manufactured in 1999, corresponds to the PV SL 1/1-1 model. This CNC-controlled vertical lathe is designed for precision machining of workpieces up to 300 mm in diameter. Technical specifications of the PCC Pittler: - Max. turning diameter: 300 mm - Travel paths: X-axis 920 mm / Z-axis 250 mm - C-axis: available - Chuck diameter: 250 mm - Spindle speed: 28–7000 rpm - Spindle power: 23–29 kW Godpowlaqyjfx Ah Rebi - Max. torque: 150–188 Nm - Spindle bore: 60 mm - Tool turret: 8 positions - Control system: Siemens Sinumerik 840D - Coolant and chip conveyor: integrated - Machine weight: approx. 6.5 tons - Connected load: 54 kVA at 400 V / 50 Hz This machine is designed for automated operation and is ideal for machining small to medium-sized workpieces with high precision. Availability and further information: Currently, several machines of this type from the 1999 production year are available, including machines with serial numbers 7-41 5157 35 and 7-41 5157 36. These machines are located in Germany and are in good used condition.

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06800001511, Bekas: Mesin Bubut Vertikal CNC Merek: DMG/ GILDEMEISTER Tipe: CTV250 Tahun Pembuatan: 2003 No. Seri: 06800001511 Gbodpfowzk D Ajx Ah Rsi

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 101458, 001 Gbodsxtpi Sspfx Ah Rei

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical Details Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1270 / 1120 mm Control: SIEMENS 840 D Max. workpiece weight: 5000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Crossrail adjustment: 400 mm Ram slide horizontal travel (X): -2770 / +2275 mm Ram slide vertical travel (Z): 1250 mm C-axis: 360° (0.001°) Milling drive: 37 kW Milling speed range: 10 - 3000 rpm Table drive power: 100 kW Gedpfoyrpyvex Ah Rsbi Torque: 31784 Nm Feed range (X/Z): 0.1 - 15,000 mm/min Total power requirement: kW Machine weight approx.: 55 t Space requirement approx.: m Additional Information Used CNC vertical turning lathe for turning, drilling, and milling operations The machine was only commissioned in 2011. CNC Control: Siemens Sinumerik 840 D Number of NC axes: 4 (X, Z, C, crossrail adjustment) Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram slide stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Main spindle speed range: 1.0 - 320 rpm Main spindle drive power: 100 kW Drilling-milling spindle: 37 kW Crossrail travel path: 2 steps of 200 mm each Total electrical connected load: 218 kVA Travels: X-axis: -1650 to +2165 mm Z-axis: 1250 mm Rapid traverse X/Z-axis: 15 m/min Number of tool magazine positions: 80 positions in the chain magazine, including 60 x HSK 100 and 20 x Capto C6 12-position disc magazine for turning toolholders and attachment heads Coolant unit with filtration and circulation system Chip conveyor Oil mist extraction system 1 x Pallet with jaw boxes, diameter 1800 mm 1 x hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 x measuring probes Several tool holders for turning tools Special features: Pallet changer with two stations, equipped with a faceplate Ø1800 mm and a six-jaw compensating chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is set in a pit. Condition Description: About half a year ago, the Carnaghi cross roller bearing was replaced. All Siemens components in the control cabinet were completely renewed at the end of 2023. Additionally, the machine features a probe for tool measurement and an external Renishaw probe for workpiece measurement. As a special feature, a probe is installed on the Z-axis (Z1 axis). This provides an accuracy and time advantage since the tool does not need to be removed for measuring. Currently, this probe is out of operation and should be overhauled before recommissioning. Furthermore, the machine features a Rotomors six-jaw compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Kondisi: bekas, Tahun pembuatan: 2007, Mesin telah secara rutin dirawat dan berada dalam kondisi teknis yang baik. Dengan sumbu-C. Gbodpfox Aq E Hex Ah Rsi Rincian teknis: Diameter piringan rencana: 1600 mm Kebutuhan daya total: 80 kW Berat mesin sekitar: 25 t Kebutuhan ruang sekitar: 4,4 x 4,62 m Diameter benda kerja – maks.: 2000 mm Diameter terbesar saat facing: 1800 mm Jenis dudukan alat: ISO50

Kondisi: bekas, de-001 Gbodpfx Aexpd Emeh Roi

Kondisi: siap digunakan (bekas), tinggi total: 3.600 mm, berat kosong: 22.000 kg, Schiess Ø 2070 x T 1330 mm Diameter chuck: Ø 1700 mm Diameter pembubutan maksimum – lewat: Ø 2070 mm - T 1330 mm Daya spindle: 30 kW Tinggi maksimum benda kerja sumbu Z: 1330 mm (Z: 1000 mm) Jumlah kecepatan: 1,7 -> 53 rpm Gedpjyru E Dsfx Ah Rjbi

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SCR 44 2SF, de Gsdpeg Uwmqofx Ah Robi

Kondisi: baru, Tahun pembuatan: 2026, tinggi pembubutan: 2.400 mm, diameter meja putar: 2.500 mm, beban meja: 30.000 kg, diameter meja: 2.500 mm, masa garansi: 12 bulan, kecepatan meja: 112 mm/menit, REM Vertikaldrehmaschine DREHDURCHMESSER SCR SCR 27 MANUELL Sonderanfertigung von REM für: - ZENTRAL- UND OSTEUROPA - NAHER OSTEN - LATEINAMERIKA - SCHWELLENLÄNDER UND WERKSTÄTTEN IN ENTWICKLUNGSLÄNDERN BESONDERE MERKMALE: - UNSCHLAGBARER PREIS - SEHR LEISTUNGSFÄHIGE MASCHINE - IDEAL FÜR WERKSTÄTTEN MIT KLEINER UND MITTLERER STÜCKZAHLENFERTIGUNG - OHNE GETRIEBEKÄSTEN - OHNE CNC-STEUERUNG - KEIN TEURER TECHNOLOGE UND FACHARBEITER NOTWENDIG - EINFACHE WARTUNG - EINFACHE BEDIENUNG - SCHNELLE EINFÜHRUNG/MÜHELOSE EINARBEITUNG Technische Daten: Planscheibendurchmesser: 2.500 mm Max. Drehdurchmesser: 2.500 mm + bis zu 300 mm Bearbeitungshöhe: 2.400 mm Max. Werkstückgewicht: 30 Tonnen Steuerung: Konventionell DIGITALE ANZEIGE für jede Achse Gjdov Hngtopfx Ah Rsbi Bitte beachten: Diese Werkzeugmaschine wird nach Auftrag gefertigt und kann an Ihre spezifischen Anforderungen angepasst werden.

Kondisi: bekas, Tahun pembuatan: 2001, Max. rotary diameter: 450 mm Chuck diameter: 400 mm Control unit: Siemens 840D (Index) Max. spindle speed: 4,200 rpm Main spindle drive power (35.5 / 56) kW Max. torque (340 / 550) Nm C-axis: 0.001° Number of tool stations: 2x 12 positions driven stations: 2x 12 positions Tool system: VDI 30 Max. speed of driven tools: 6,000 rpm Driven tools drive power: 9.5 kW Max. torque (40%): 19 Nm Y-axis: +/- 90 mm B-axis: +270° / -90° X-axis: 730 mm Z-axis: 340 mm Y-axis: +/- 90 mm B-axis: +270° / -90° Rapid traverse X: 40 / Z: 30 m/min Number of pallets: 24 positions Pallet size: 410 x 300 mm Gedpfxeyq Sk Ie Ah Rsbi Max. workpiece diameter: 300 mm Max. workpiece weight incl. pallet: 25 kg Chain width: 75 mm Belt speed: 7.5 m/min Total connected load: 56 kW Machine weight: approx. 9.0 t Space requirements: approx. 8.5 x 6.0 x 2.7 m CNC vertical lathe INDEX - V 300 Y/B - incl. 24-position Schnaithmann pallet circulation system - incl. ball screw spindle as spare part - incl. 39x driven tools - incl. 39x tool holders

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, general Manufacturer: EMAG Machine type: VSC 400 (VSC 7 DSL) Description according to sales documents: Vertical turning machine with associated Promot portal loading system Year of construction (machine): 2011 Year of construction (loading system): 2011 Application: Hardened bevel gears for passenger car axle drives were finish turned on this machine Condition according to documents: Technically good condition considering the age Scope of delivery EMAG VSC 7 DSL vertical turning machine Promot portal loading system Not included in the scope of delivery All workpiece-contacting components Gripper jaws of the portal loader Shuttle supports on the workpiece feeder Clamping devices Tools Control system for the Promot loading system Power supply: 3~ Frequency: 50 Hz Operating voltage: 400 V Control voltage (general): 24 V Control voltage (valves): 24 V Connected load: 43 kW Rated current: 68 A Main fuse: 100 A Lighting connection: 24 V / 18 W Total weight: 9,000 kg Data for Promot loading system Manufacturer: Promot Automation Machine type: PROMOT Portal with Cellmaster Year of construction: 2011 Operating voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Load voltage: 24 V DC Gedpoyq Rwgefx Ah Rsbi Rated current of the machine: 12 A Main connection fuse: 25 A Conductor colors according to Promot type plate Main circuit L1, L2, L3: 400 V AC – black Auxiliary circuit: 230 V AC – black Main circuit (contactors): 24 V DC – blue Control circuit PC: 24 V DC – blue Control circuit (signal lamps): 24 V DC – blue Control circuit (solenoid valves): 24 V DC – blue External voltage: 24 V DC – orange Neutral conductor N: light blue Protective conductor PE: green/yellow

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Kontrol Siemens SINUMERIK 840D, C200-4D Kecepatan putar: 6000 1/menit Gsdpeyp Icwsfx Ah Rebi Perjalanan X/Y/Z: 280/280/145 mm Jumlah revolver: 1 dengan 6 posisi Jumlah tempat alat: 2x4 Konveyor serpihan Sabuk konveyor palet Palet

Kondisi: baik (bekas), Tahun pembuatan: 1979, Mesin bubut vertikal kolom tunggal BERTHIEZ TM500 SP, dengan spesifikasi sebagai berikut: Gbedpfx Ahox A U Rao Rsi Produsen: Berthiez (Prancis) Model: TM500 SP Tahun pembuatan: 1979 Data teknis utama: Diameter meja: 6300 mm Diameter pembubutan maksimum: 15000 mm Tinggi kerja maksimum: 4000 mm Perjalanan lengan: 3600 mm Daya motor utama: 100 kW Beban maksimum yang diizinkan pada meja: 80 t Ukuran ram: 360x360 mm Berat mesin sekitar 230 ton Mesin dapat melakukan operasi pembubutan dan milling. Jangan ragu untuk menghubungi kami untuk informasi tambahan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, RAFAMET tipe KCF 400 Gedpfxeytq T He Ah Rjbi Informasi lebih lanjut atas permintaan

Kondisi: baik (bekas), Max. diameter pembubutan: sekitar 1.100 mm Diameter pembubutan di atas chuck: 800 mm Tinggi pembubutan maksimum di atas chuck: 900 mm Beban meja maksimum: 2.000 kg Gaya potong total terbesar pada diameter 700 mm: 3.400 kg 12 kecepatan putar chuck: 12 - 200 rpm Jumlah feeding, horizontal dan vertikal: 8 Ukuran feeding, horizontal dan vertikal: 0,069 – 2,6 mm/putaran Gerakan rapid support: 2.500 mm/menit Daya motor: 15 kW Dimensi P x L x T: 2.300 x 2.100 x 2.900 mm Berat: sekitar 7.500 kg Aksesori / Fitur khusus: Gbsdoxamgzjpfx Ah Rsi • Indikator digital 2-sumbu (Baru pada 2024) • Revolver bintang 5 posisi • Tombol penghenti darurat • Pelindung serpihan untuk chuck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Jerman

Kondisi: siap digunakan (bekas), Schiess 32 DZ Gbjdpjv Sfnxofx Ah Roi Tipe: 32DZ 300/350-325/160 Mesin bubut meja Schiess DZ dengan dua tiang cocok untuk segala jenis pekerjaan bubut. Diameter meja: 3000 mm Kapasitas beban maksimum: 44 ton Kecepatan: 1–100 rpm Torsi maksimum yang dapat ditransmisikan ke meja: 10.000 kpm Gaya potong pada carriage: 5000 kp Daya: 75 kW Kontrol CNC: BOSCH (spindle bola) Heidenhain linear scale Pergerakan horizontal dudukan alat dari tengah meja: 2510 mm Pergerakan vertikal balok melintang: 1600 mm Langkah vertikal dudukan alat: 1600 mm Dudukan alat dapat dimiringkan 30° ke kiri dan kanan Tinggi maksimum benda kerja: 3420 mm Diameter maksimum benda kerja: 4020 mm Penukar alat dengan 12 posisi alat

Kondisi: siap digunakan (bekas), diameter luar chuck: 6.000 mm, model controller: Siemens/Heidenhain, berat kosong: 220.000 kg, Tipe: SD 600/6500 4 sumbu terarah, spindle dengan alur bola Jarak antara kolom: 6500 mm Tinggi maksimum di bawah balok melintang: 4270 mm Gerakan vertikal balok melintang: 2500 mm Berat maksimum di meja: 160 ton Torsi meja: 30.000 Nm, 200 HP Gerakan vertikal Z1 Z2: 1750 mm Dua lift gunting independen di setiap sisi mesin bubut, dengan unit kontrol Diameter putar maksimum — bukaan: 6500 mm Daya pada spindle: 200 HP Tinggi maksimum benda kerja (sumbu Z): 4270 mm Gjdpfewaiuqex Ah Rsbi Jumlah kecepatan: 1 > 40 rpm Panjang: 20.500 mm Lebar: 8500 mm Tinggi: 6290 mm (di atas permukaan tanah)

Kondisi: siap digunakan (bekas), diameter luar chuck: 1.250 mm, model controller: E.C.S CNC 1402, berat kosong: 17.000 kg, Beban maksimum di meja: 5000 kg Perkakas KM 50 Diameter putar maksimum — lintasan: 1400 mm Daya pada spindle: 60 kW Pergerakan longitudinal maksimum sumbu X: 2700 mm Tinggi maksimal benda kerja sumbu Z: 750 mm Jumlah kecepatan: 2-430 rpm - maks 450 Nm Daya yang dibutuhkan: 3 x 380 V Perlengkapan perkakas: ya Turret: ya Jumlah perkakas: 24 Pompa pendingin: ya Gbjdjxqh R Nepfx Ah Rsi Penerangan: ya

Kondisi: siap digunakan (bekas), diameter luar chuck: 700 mm, tinggi total: 3.415 mm, model controller: Siemens 840D Solution Line, berat kosong: 17.000 kg, en-de-ultrix-800-rt Type: Ultrix 800 RT Die Ultrix 800 RT ist ein multifunktionales Bearbeitungszentrum mit 5 interpolierten Achsen und einem beweglichen Portalaufbau zum schnellen Fräsen, Drehen, Schleifen, Bohren, Gewindeschneiden, Finishing, Entgraten und der Vorbearbeitung komplexer Werkstücke. Beim Einsatz als Vertikaldrehmaschine: - Drehdurchmesser: 1.100 mm - Maximales Werkstückgewicht: 700 kg - Tischantriebsleistung: 40/30 kW - Maximales Drehmoment am Tisch: 1.500 Nm - Max. Tischdrehzahl: 800 U/min - Hydraulische Tischklemmung - Werkzeugschnittstelle Drehen: KM63 - Werkzeugwechsler mit 150 Positionen, davon 24 für Drehwerkzeuge Beim Einsatz als Bearbeitungszentrum zum Fräsen, Schleifen, Bohren usw.: - X-Achse: 800 mm - Y-Achse: 900 mm - Z-Achse: 600 mm - A-Achse: -30° / 110° - C-Achse: endlos - Maximales Werkstückgewicht: 700 kg Gbedpjxtgkajfx Ah Roi - Spindelleistung: 55/40 kW - Max. Spindeldrehmoment: 18 / 16 Nm - Max. Spindeldrehzahl: 40.000 U/min - Werkzeugschnittstelle Fräsen: HSK-E40 - Werkzeugwechsler mit 150 Positionen, davon 126 Plätze für Fräs-, Schleif- und Bohrwerkzeuge Liste der an der Maschine verbauten Optionen: 1 - Hochgeschwindigkeitsspindel mit 40.000 U/min 2 - Tischdurchmesser 700 mm mit hydraulischer Klemmung 3 - Werkzeugwechsler für 150 Werkzeuge 4 - Späneförderer 5 - Kühlsystem mit Rückgewinnung 6 - Temperaturregelung für Kühlmittel 7 - Hochdruckkühlung (40 bis 70 bar) durch die Spindel 8 - Rauchabsaugung 9 - Späneauffangbox 10 - Werkzeugvermessung und Werkzeugbruch-Kontrolle: Laser- und taktile Messtaster für Messwerkzeuge 11 - Renishaw-Messtaster Max. Drehdurchmesser (Durchlass): 1.100 mm Spindelleistung: 40/30 kW Länge: 4.655 mm Breite: 5.890 mm Revolverkopf: ja Anzahl Werkzeugplätze: 150 Kühlmittelpumpe: ja