Beli Gripper bekas (846)

Kondisi: bekas, Tahun pembuatan: 2023, produsen pengendali: Mazak, model controller: Mazatrol SmoothAi, ----- Description: General: Year of manufacture: 2023 Control: Mazak Mazatrol SmoothAi Max. turning diameter: 600 mm Max. turning length: 850 mm Main Spindle: Technology: Motor spindle Speed: 6,000 rpm Power: 11 kW Max. torque: 184 Nm Bar capacity: 51 mm C-axis: 0.0001° Chuck: 3-jaw chuck Chuck cylinder: Hollow clamping cylinder Sub Spindle: Technology: Motor spindle Speed: 6,000 rpm Power: 11 kW Max. torque: 184 Nm Bar capacity: 51 mm C-axis: 0.0001° Tailstock function: Yes Nodpfx Ajyrvzmsbvscp Tool Carrier (X/Y/Z/B): Technology: Gantry with milling spindle X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis: -30° / +210° Milling spindle speed: 20,000 rpm Power: 24 kW Tool Magazine: Technology: Rack magazine Number of stations: 250 Tool changer: Double gripper Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 15 bar Workpiece measuring: Renishaw RMP 60 Tool measuring: Renishaw tool setter Bar loader: IRCO ILS-MUK 7012 Finished part removal: Parts catcher Software option I: 5-axis simultaneous machining Software option II: Synchronous thread cutting Software option III: Cylinder interpolation Software option IV: Tool radius compensation Software option V: Tool length compensation Emulsion mist extractor: Mechanical Setup mode: Electronic handwheel

Kondisi: bekas, Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance 1800 mm Travel per revolution 20 mm Maximum speed 1 m/s Drive element ballscrew Guidance system recirculating ball guide size 20 Payload 60 kg Maximum ballscrew speed 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Max. current draw 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper mounted on guide carriage - Gripper jaw opens pneumatically - Unit mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Ncodjw Uc T Iepfx Abvop Nearly identical linear unit available under stock number 59700

Kondisi: bekas, en-GB-1 Nodpogf Ix Ajfx Abvecp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 620 (3D), kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 13.000 W, jumlah sumbu: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive travel distances of 1100 mm (X-axis), 560 mm (Y-axis), and 510 mm (Z-axis). The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control unit. If you are looking for high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining center we are offering for sale. Contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and in active production; inspection possible (function, geometry, overall condition) • Table size: 1,400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: Chain magazine with 30 positions and double gripper • Cooling/Media: Coolant and air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for the measuring system • Additional machine options: Ncjdpfx Aeylkl Tjbvsp • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop • HEIDENHAIN Software options: • Option 3 (#21): M120 tool radius compensation in contouring operation, LOOK AHEAD for up to 99 blocks, 3D machining, M118 handwheel positioning during program run Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 L • Manual cleaning gun for the machining area • 4-color signal tower • HEIDENHAIN probe package: Wireless workpiece probe and probe calibration ring • Manual handwheel (portable control panel) Technical specification Taper size SK 40

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), berat keseluruhan: 3.800 kg, kecepatan spindel (maks.): 600 rpm, jumlah sumbu: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle rated at 16 kW peak power. The machine accommodates a wide range of workpiece sizes, with a maximum diameter of Ø 20 mm and a load capacity of 1 kg. If you are looking for high-quality grinding capabilities, you should consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Please contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; positioning accuracy ±15''; index range 1–999; cumulative lead error over 100 mm: 8 µm; max. speed 600 rpm • Tool holder: ISO 50 • Spindle chuck sleeve clearance: max. 28 mm (with automatic clamping: Ø 20 mm) • Rated drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide vertical: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Positioning systems: • A-axis: direct measuring system • B-, X-, Y-, Z-axis: indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; circuit breaker: separate supply from the mains • Compressed air: 15–17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; software NUMROTOplus (dongle/hardlock required); zero points calibrated (calibration instructions supplied – no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up system • Max. workpiece: Ø 20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø 3.0–5.0 mm shank: 40 pieces • Ø 5.1–8.0 mm: 32 pieces • Ø 8.1–11.0 mm: 28 pieces • Ø 11.1–14.0 mm: 24 pieces • Ø 14.1–20.0 mm: 20 pieces • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø 32 mm × 200 mm; 2.5 kg • Features: Random loading of different workpieces; automatic quick-change collets supported • Chuck sleeves: Ø 6, 8, 10, 12, 14, 16, 20 Ncedpfxjyiz R Uj Abvop • External chain loader option: increases machine weight to approx. 3,800 kg and footprint to 3,000 mm × 1,875 mm • Coolant filtration system (TRANSOR): to be provided by customer; air for back-flushing approx. 700 Nl/min for 5 min every 6–9 hours

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), This EUBAMA S6 rotary indexing machine was manufactured in 2006. It features a robust base frame, hydraulic connections, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. The machine is ideally suited for precision work and is additionally equipped with a facing head and a length control system with pneumatic cylinder and laser. Contact us for further information about this machine. • Base frame • Accessories for base frame • Hydraulic fittings • Device carrier (left) TK420 • 108 drill holes • Pipework (coolant return) • Flange shaft with face gearing • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective cover • Part reversal unit – material guide • Guide axis • Cover plates with empty slots • Milling unit with NC feed • Clamping with timing belt pulley z1=16 • Timing belt pulley Z1=16 • Timing belt pulley Z2=20 • Timing belt 25 AT10 / 730 • Hydraulic unit 70 100 04358 32 l/min • Central lubrication • Deflector plate T - T Additional Equipment • Parts ejection console • Straightening and feed rollers Nedpex D If Tsfx Abvjcp • Clamping quick-change station 1 • Tools and tool holders • Actuating tools S6 • Ejector with gripper • Clamping jaws (plates) • Press-in unit for internal hexagon • Facing head PCD 100-01-101 • Length measurement with pneumatic cylinder and laser • Roller holder (star cross) • Extension (coil height) • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) • 24-volt filling unit with integrated emergency shut-off valve • Compressed air maintenance unit DA 300

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 92.000 h, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It offers a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret featuring 12 stations and driven tools on both turret 1 and 2. If you are looking for top-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we have for sale. Contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in the CAM programming system • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Sub-spindle coolant flushing (electrically actuated shut-off valve) • Foot switch • Turret (12 stations) upper and lower • Driven tools on turret 1 and 2 • Control function "Synchronous tailstock" for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant supply on slides 1 and 2 with solenoid valve • Coolant washdown gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Gantry unloading device with actuated gripper, NC-controlled Nedsylw Dcepfx Abvecp • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion application) • High pressure pump 80 bar • Workpiece clamping: • Collet chuck for pull rod, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large selection of driven tool holders and spare parts inventory

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 61.469 h, produsen pengendali: TRUMPF, model controller: TASC 6000, This TRUBEND Cell 5000 featuring the TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, equipped with 6-axis backgauge sensor technology. Ensures highest repeat accuracy thanks to angle measuring technology (ACB) in automated operation. Features a robust all-steel frame, electro-hydraulic upper drive, and modern block hydraulics. The machine is controlled by the TRUMPF TASC 6000 with a 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending tasks. Contact us for further information on this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearings and tilt adjustment • Electro-hydraulic upper drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure scale • Measurement system with glass scale and spring compensation • Hydraulic oil within the machine (lifetime lubrication) • Oil cooler Ncedpfsx Imqlex Abvep • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge/stop • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable • Teleservice via modem • Operation • Control panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety equipment • BendGuard safety device for upper tools up to 390 mm • CE marking Additional Equipment • TRUMPF BendMaster automation (standard equipment) • Robot/handling • Stable base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary union for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double-sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operating terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Highest repeatability thanks to angle measuring technology (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, produsen pengendali: KUKA, model controller: smartPAD, jumlah sumbu: 6, This 6-axis KUKA KR 10 R1440-2 robotic arm from 2023 features a payload capacity of 10 kg and a reach of 1440 mm. It comes equipped with a compact KUKA KRC4 control cabinet, a smartPAD teach pendant, and various interfaces for enhanced functionality. Ideal for tasks requiring precision and flexibility. If you are looking for advanced robotic capabilities, consider the KUKA KR 10 R1440-2 machine we have for sale. Contact us for more information about this unit. Additional equipment • Transfer gripper and support contour with integrated vacuum feedthrough • Bellows suction pad, lifting plate • Parallel gripper, terminal box • QC 90 quick-change system, pneumatic coupling • Robot 3D energy chain • Documentation in German and English Machine advantages Qualitative machine benefits • 1440 mm reach • Various transfer systems for different applications Technical machine benefits • Compact, plug-and-play control cabinet with KUKA smartPAD programming device • Selogica programming interface in German and English • Fixed end stops to limit the working range • 4x vacuum units (Venturi principle) with blow-off function • 4x 5/3 pneumatic valves with vented mid position • 4x 5/3 pneumatic valves with locked mid position • 2x eight freely programmable inputs for polishing with gripper-side sensors Nedpfx Abjx R E Stjvecp • Pneumatic maintenance unit with compressed air monitoring • Device interfaces for peripheral control • Payload capacity of 10 kg Additional information Machine still under power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Panel saw BIESSE Selco WNT 630 ini diproduksi pada tahun 2022. Mesin ini memiliki panjang potong maksimum 3.800 mm, tinggi keluaran mata gergaji 108 mm, dan kapasitas meja angkat 5 ton. Ideal untuk pengolahan panel besar hingga ukuran 3.660 x 2.200 mm. Jika Anda mencari mesin potong berkualitas tinggi, pertimbangkan BIESSE Selco WNT 630 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Nodpfxoyf I U Ss Abvecp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 20.325 h, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 880 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: TNC430, tinggi total: 3.200 mm, lebar meja: 1.250 mm, panjang meja: 1.000 mm, beban meja: 2.000 kg, berat keseluruhan: 18.000 kg, kecepatan spindel (maks.): 8.000 rpm, jumlah slot dalam magazin alat: 120, panjang produk (maks.): 6.000 mm, jumlah sumbu: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It is equipped with a Heidenhain control, an SK50 spindle taper, and 120 tool stations. With a total of 22,180 spindle hours, you should not miss the opportunity to purchase this DMG DMU 125 P hi-dyn universal machining center. Contact us for further details on this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel paths: 1250 x 880 x 800 mm • Tool holder: SK50 Nodox Sz Dhopfx Abvecp • Tool changer: 120 positions in chain magazine • Gripper type: double gripper • Control unit: Heidenhain TNC 430 • Working area: longitudinal 1250 mm, transverse 880 mm, vertical 800 mm • Dimensions: approx. 6 x 8 x 3.20 m (height) • Weight: approx. 18,000 kg • B-axis is indexed Additional Information: • Full enclosure • Through-spindle coolant • Blow air through spindle retrofitted • Chip conveyor • Coolant tank: 600 liters • NC rotary table D1250 x 1000 mm • Maximum table load in center: 2,000 kg • Clamping grid: 9 slots 18H7 at 100 mm intervals • Motor assembly with SK50 gearbox – spindle speed up to 8,000 rpm • Renishaw MP10 SK50 infrared probe • Electronic handwheel • 4 operating modes possible • Rinsing pistol with pump Technical Specification Taper size: SK 50 Through-spindle coolant: Yes Dimensions Machine depth: 8,000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, produsen pengendali: SIEMENS, model controller: 840 D, lebar meja: 500 mm, panjang meja: 500 mm, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 20.000 W, jumlah slot dalam magazin alat: 303, jumlah sumbu: 4, This DMG DMC 60H Linear horizontal machining center was manufactured in 2013 and has 46,048 production hours. It is equipped with a Siemens 840 D control unit and features 4 axes. The machine has a spindle speed of 18,000 rpm. Please refer to the original delivery note (PDF attached) for a full list of technical specifications. Additional Equipment • Scraper-type chip conveyor with 980-liter coolant system, paper band filter, discharge height 950 mm, width 380 mm, high-pressure coolant through the spindle (IKZ) 80 bar / 14 l/min (AD), infinitely programmable pressure, selectable via NC program, enclosure rinsing 180 l/min via spray nozzles using a Rippel valve Nedpoyi Ekfsfx Abvjcp • Rotatable viewing window / work area door • Coolant gun with pump • Double gripper • Wheel-type tool magazine • NC rotary table, Ø 630 mm • 3D path control Machine Advantages Quality Advantages • MCIS TDI tool management (TDI machine module) – overview, tool management, planning • Mechanical and electrical pre-installation for oil mist extraction • Tool breakage detection via mechanical design Technical Advantages • Number of pallets: 12 // round pallet storage: RS 12 • Rotating pallet changer // worktable with pallet supports // max load: 600 kg // 2 pallets 500 x 500 mm with T-slots // pallet management // pallet changer enclosure // claw-rinsed pallet • Coolant through spindle: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine places, HSK A63 • Infrared measuring probe Renishaw PP60 optical (OMP60) HSK-A 63 • MPC protective machine control (machine protection by rapid shutdown) • Laminated safety glass window for the right cabin door Additional Information Documentation and electrical circuit diagram (in German) available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have available for sale. Contact us for further information. Work Table and Clamping • 8 ATS panel supports (L = 1525 mm) and 24 guide rails • Automatic positioning of panel supports and guide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops Ncedpfx Aex D H Hcobvep • Pneumatic system for support bar holders • 6 support bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 configuration: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a machining unit with 5 interpolating axes (units can be used only when the electric spindle is vertical) • C3-P2 configuration: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • BH 42 L boring head • Chain tool changer with 22 positions (180 mm pitch) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires mounting device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Conveyor belt for removal of chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled boring head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 900 mm, produsen pengendali: SIEMENS, model controller: 840D sl, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 46.000 W, jumlah sumbu: 5, DMG DECKEL MAHO DMF 260-11 5-sumbu ini diproduksi pada tahun 2017. Ini adalah pusat pemesinan universal dengan kolom bergerak, penggerak linier sumbu-X dengan kecepatan 80 m/menit, dan spindle motor dengan kecepatan hingga 15.000 rpm. Dilengkapi dengan kepala putar, majalah alat 30-slot, dan meja tetap berukuran 3.200 x 1.100 mm. Manfaatkan kesempatan untuk membeli pusat pemesinan universal DMG DECKEL MAHO DMF 260-11 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Spesifikasi Teknis Ukuran Taper SK 40 Ncsdpfx Ajx D Iclobvsp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 55.000 h, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 7.000 kg, produsen pengendali: TRAUB, model controller: TX8i-s, jumlah sumbu: 7, This 7-axis TRAUB TNL 32-7 horizontal lathe was manufactured in 2013. It is ideal for precision turning operations and offers robust performance and reliability. Take advantage of the opportunity to purchase this TRAUB TNL 32-7 horizontal lathe. Contact us for more information. Ncjdpfxoyrd H Ds Abvsp Additional equipment • Coolant pump 3 bar / Coolant pump 8 bar • Chip conveyor, hinge belt type H=1000 mm • Linear scale on X-axis for upper/lower turret • Fabric filtration for coolant: filtration grade approx. 30-40 µm • High-pressure coolant pump 20 bar • CO2 fire extinguishing system by Kraft & Bauer Machine advantages Technical advantages • Maximum bar diameter: 32 mm • Spindle stroke: 305 mm • Automatic bar loader: fmb lsk38-3200, max. bar length 3200 mm • Upper turret: x/y/z/h-axis, 10 double-driven tools • Lower turret: x/y/z/h-axis, 9 tools with identical drive; counter-spindle with independent drive • Conveyor belt for finished parts with gripper • Machine was operated exclusively with cutting oil

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 1.316 h, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 828D, tinggi total: 2.840 mm, beban meja: 600 kg, berat keseluruhan: 5.600 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 8.000 g, jumlah sumbu: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20–12,000 rpm and an automatic tool changer with 24 positions. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Further highlights include a Renishaw PP40 touch probe, a 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Additional Equipment • Job Shop Package • Renishaw PP40 wireless workpiece probe • TS27R tool setting probe • Scraper chip conveyor • Coolant tank capacity: 200 l (left side) • Coolant pump: 20 bar internal coolant through spindle • Machine enclosure roof • LED workplace lighting Machine Advantages Technical Machine Advantages • Table size: 850 × 650 mm • Automatic tool changer with 24 positions and double gripper Ncsdpfx Abox D Nigovop • Drive type: ball screw drives with AC servomotors • Voltage: 3 × 400 V Additional Information The machine is in fully functional condition Inspected and certified by DMG service report, including accuracy measurements Complete documentation is available Currently disconnected from power Dimensions: Machine depth: 3065 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 2.215 h, produsen pengendali: HEIDENHAIN, model controller: TNC 640, kecepatan spindel (maks.): 20.000 rpm, daya motor spindle: 35.000 W, jumlah sumbu: 5, This 5-axis MTcut UDS80H-5A was manufactured in 2019. It features a spindle with 20,000 rpm, 120 Nm torque, and 35 kW drive power. Equipped with an HSK63 tool holder, 96-position tool changer, and a Kessler rotary-tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with Heidenhain glass scales and BLUM laser tool measurement. Contact us for further information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program run time 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary-tilting table with 2 A-axes and 1 C-axis, directly driven torque motors • Feedback: Heidenhain glass scales on all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" TFT color display • Connections: Ethernet interface, 2x USB ports • Control functions: Plain text programming; short processing times; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Additional Equipment • Chip conveyor Njdpfsx D In Uex Abvocp • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measuring system • Heidenhain TS460 workpiece probe system for HSK63 with wireless and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, airflow 1,250 m³/h • Swiveling inspection window • Work area lighting • Tool package Technical Specification Taper size: HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, produsen pengendali: KUKA, model controller: KRC4, jumlah sumbu: 6, These KUKA welding robots are equipped with a rotary/tilting module offering a maximum payload of 2,600 kg and a KUKA KL4000 linear track. If you are searching for high-quality welding solutions, consider this welding robot package we are offering for sale. Contact us for more information. Additional Equipment • Component cradle (cradle mount) between the rotary tilting table and the counter bearing. Dimensions: L = 4,250 mm x 1,000 mm. Pre-drilled with 16 mm holes as specified. • Connection to the backing plates with Bräuer standard hole pattern (installation height still to be adjusted to ensure the largest possible swing radius). • The component holder is designed for quick changeover (Bräuer standard). Machine Advantages Technical Machine Benefits • Rotary-tilting module (payload 2,600 kg) • Installation position (mounting): KL4000 track Nedpsx D Hzmsfx Abvecp • Hofmann blue finish. Rotary module with counter bearing • Rotary-tilting module KP2-HV 2600 HW with counter bearing for robot system // rotary-tilting module KP2-HV 2600 HW, freely programmable, max. load 2,600 kg, max. torque 3,900 Nm, max. tilting moment 9,250 Nm, max. rotary axis speed 50°/s, max. tilting axis speed 25°/s • Rotary diameter = 1,200 mm • KRC4 standard control cabinet • Design services for fixtures, grippers, positioners or custom accessories • Enclosed cable ducts for installation within the system on the floor/base plate, or open cable trays for installation above the safety fence • CDA layout plan Additional Information The machine is brand new and unpacked. It was built by the system integrator but was never delivered. Counter bearing for rotary-tilting module KP2 Counter bearing for the rotary-swivel module KP2 11/26, allowing the KP2 to be used as a tailstock rotary device. The counter bearing is bolted to the base (Demmler) and can be adjusted on the Demmler plate in 100 mm increments. Diameter = 28 mm. Rotary diameter = 1,200 mm. Work Area Overview - Connection plan - Project schedules - Assembly drawings Conversion and configuration Conversion and configuration of the system from a 3D CAD model to a simulation model for Cenit. Electrical and pneumatic wiring.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, produsen pengendali: FANUC, jumlah sumbu: 3, This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021 and offers advanced horizontal turning capabilities. This machine is ideal for complex and precise metalworking applications, delivering efficient production thanks to its robust construction and state-of-the-art technology. If you are looking for a high-quality lathe, consider the CMZ TTL-66-66-TTY-T2Y machine we are offering for sale. Please contact us for further information. Machine Advantages Technical Features • LPS for left spindle / axial stop for left spindle / coolant supply through left spindle / Hainbuch Axfix 65 collet chuck for left spindle / LPS system in right spindle / coolant supply through right spindle / tailstock on right spindle (long version) for rotating tailstock center MT3 / Hainbuch Axfix 65 collet chuck for right spindle Nsdpfsx D Ei Aex Abvocp • Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar) / lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar) • Tool presetting device / tool life management / tool load monitoring / double radial holder for 20x20 mm tools / holder for Ø32 h75 boring tools / TTL/10400/02 axial holder for AGW ER32 with internal coolant supply 70 bar / TTL/10400/09 radial holder for AGW with internal coolant supply 70 bar ER16 • Coolant nozzles above the spindles / coolant wash nozzle / coolant tank level monitoring • Rotatable viewing window / machine status light / rear chip conveyor with double chain / preparation for extraction, connection flange Ø150 / special portal enclosure / GL20-II 3-axis CNC gantry loader / servo-controlled 2x180° double swivel gripper for shaft parts / WS-700-3000 workpiece carrier on left front side / WS-700 with 3 rows of V-guides • Collet set for raw material: Ø32 mm, Ø35 mm, square 30 mm / gripper set for finished parts: Ø32 mm, Ø38-40 mm, square 30 mm • Extraction system: LTA E120-X1-H, including mounting parts, hoses, and bracket • CMZ requires a signal indicating that a part can be placed / an output signal indicating that the conveyor belt can run freely

Tahun pembuatan: 2010, jam operasional: 51.200 h, Kondisi: siap digunakan (bekas), diameter sekrup: 80 mm, en Ncodpfx Aeyffcajbvep

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, en Ncodjx D Hypopfx Abvop

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), berat keseluruhan: 900 kg, daya motor spindle: 85.000 W, This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting center for aluminum profiles with a feed travel of 7,395 mm and a feed rate of up to 60 m/min. The saw blade swivel angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for large-scale, precise cutting tasks. Contact us for further information on this machine. Additional Information • Power supply: 400 V / 3-phase / 50 Hz • Saw motor output (50 Hz): 3 kW • Blade motor output (60 Hz): 36 kW • Feed travel (U-axis): 7,395 mm • Feed speed (U-axis): 0-60 m/min • Acceleration (U-axis): 33 m/s² • Positioning accuracy (U-axis): ±0.15 mm • Saw blade swivel angle (B-axis): from -45° to +45° (optional: -225° to +225°) • Rotational speed (B-axis): 1,833 rpm • Acceleration (B-axis): 0.93 m/s² • Positioning accuracy (B-axis): ±1° • Min. cut length: 7,200 mm (with gripper arm L = 937 mm) • Standard blade diameter: 500 mm (optionally 550 mm) • Blade rotational speed (50 Hz): 2,845 rpm • Blade speed (60 Hz): 3,400 rpm • Operating air pressure: 6-8 bar Nsdjx D D E Nopfx Abvocp • Air consumption per cycle: 120 l/min • Bar feed magazine cart (optional) • Infeed/outfeed roller conveyors • External safety enclosure

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 22.000 W, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling centre, Index G200 C, was manufactured in 2000. Take advantage of the opportunity to acquire this Index G200 C turning and milling centre. Contact us for further information. Additional Equipment • Synchronisation device for sub-spindle machining • Tool carrier 3 for sub-spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning device • Tool changer without gripper (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • With C-axis • No driven tools Ncedpfxsyailze Abvsp Machine Advantages Technical Advantages • Footprint (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel with multi-axis configuration • High precision with 0.001 mm resolution in numerical control • Versatile expansion steps and supplementary equipment for enhanced functionality Additional Information Motion Cross Slide 1 (top) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotating): 360° swivel range, angle increment 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross Slide 2 (bottom) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm Turret right: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock centre distance: 400 mm Max. thrust: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Filling capacity: 70 litres Coolant system: Pump output (switchable): 20 l/min @ 18 bar / 50 l/min @ 3 bar / 60 l/min @ 5-7 bar Filling capacity: approx. 230 litres Chip conveyor: Hinged belt or scraper conveyor Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Sub-spindle: D140 external mount (only pull tension allowed for collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (30 mm bore) / 85 mm (42 mm) / 100 mm (60 and 65 mm) Max. speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar diameter (workpiece-Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine depth 3580 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, This 6-axis Mitsubishi RV-7FRLM-D robotic arm was manufactured in 2011. It features a vertical articulated structure, capable of handling a maximum payload of 7 kg with a reach of 908 mm. The robot is equipped with an AC servo motor and can be installed on the floor, ceiling, or wall. Operating with a swift cycle time of 0.35 seconds, it carries an IP67 protection rating. Take this opportunity to acquire the Mitsubishi RV-7FRLM-D robotic arm. Contact us for more information. • Design: Vertical articulated type • Environmental Specifications: Oil mist • Protection rating: IP67 • Installation: Floor/ceiling/wall mounting • Degrees of freedom: 6 • Drive system: AC servo motor (all axes with brake) • Position detection: Absolute encoder • Payload: Maximum: 7 kg / Rated: 7 kg • Upper arm: 435 mm • Lower arm: 470 mm Ncedpsx Enknefx Abvsp • Maximum reach radius: 908 mm • J1: -240° to +240° • J2: -110° to +130° • J3: 0° to +162° • J4: -200° to +200° • J5: -120° to +120° • J6: -360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum composite speed: 11,000 mm/sec • Cycle time: 0.35 sec • Repeat positioning accuracy: ±0.02 mm • Ambient conditions: Operating temperature: 0–40°C / Robot weight: 67 kg • Permissible torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 Nm • Permissible moment of inertia • J4: 0.45 kg-m² • J5: 0.45 kg-m² • J6: 0.10 kg-m² • Tool interfaces Tool wiring: • 8 inputs / 8 outputs for gripper • Multifunction gripper & sensor signal cable • LAN × 1 (100BASE-TX) • Tool pneumatic hoses: • Primary: Ø6 × 2 • Secondary: Ø4 × 8 • Controller Connected controller type: CR800-07VD / Controller type: Stand-alone

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 25.000 W, jumlah sumbu: 5, Diese 5-Axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for vertical precision machining, this used machine is a valuable addition to any workshop. Take the opportunity to purchase this vertical machining center DMG DECKEL MAHO DMC 60U RS5, including a Schuler automation system. Contact us for further details. Additional Equipment • Tool Changer & Magazine: Horizontal double gripper / magazine type: chain magazine / capacity: 60 tool stations / tool clamping: according to DIN 69872 / tool breakage control: mechanical version • Schuler automation • Coolant tank: 900 L • ICS (internal coolant supply): Form AD with paper band filter • Probe: Heidenhain TS 641 (infrared) • Tool measurement: Blum laser for measuring tool length and diameter, horizontal/vertical • Rotating viewing window Machine Advantages Technical Advantages of the Machine • Production hours: 54,347 operating hours, spindle hours 26,748 (new spindle has 3,500 hours) • Universal milling head with controlled B-axis • Very well-maintained machine, used for high-end applications • Spindle replaced in 2021 at a cost of approx. 40,000 EUR • Service history available Additional Information Disc changer and 4 pallets included, control system: 3D Heidenhain path control "Millplus IT with Millplus IT handwheel" Optional: more pallets Regularly serviced Geometry protocol dated February 5, 2026 Spindle taper regrinding: €1,500-€3,000 Ncedpfeyaam Asx Abvep