Beli Gripper bekas (872)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 1.680 kg, Tahun pembuatan: 2006,

Tahun pembuatan: 2017, Kondisi: seperti baru (mesin pameran), Like-new parallel gripper for workpieces up to 49 kg Lhodpfxohhyuao Aahor

Kondisi: sangat baik (bekas), warna: lain, Tahun pembuatan: 2022, Year of manufacture: 2022 Unladen weight: 1,100 kg Dimensions (L x W): 190 x 80 cm Suitable application for: Excavator Quick coupler system: Yes Technical condition: Very good Visual condition: Very good Condition CE type: CE Lhedpfx Aswlzckeahsr

Kondisi: sangat baik (bekas), daya: 6 kW (8,16 hp), Tahun pembuatan: 2003, Tahun pembuatan: 2003 Kondisi teknis: sangat baik Kondisi optik: sangat baik Kerusakan: tidak ada Hubungi Ferdinand Pater untuk informasi lebih lanjut. Lhedpfju Hlgbex Aaher

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Bandwidth: up to 76 mm Feed length: up to 76 mm Strip thickness: 0.076 - 1.91 mm Speed: up to 195 strokes/min at full feed length Feed force: 205 N with mechanical control valve or optionally as shown in the photo with solenoid valve (24V or 230V) Also available in: - Bandwidths from 38 to 400 mm Lhedpfxsxaqvo Aahsr - Feed lengths up to max. 300 mm - Strip thicknesses 0.05 to 3.18 mm

Kondisi: baru, Tahun pembuatan: 2022, Purpose: Construction CE marking: yes Country of manufacture: NL Ljdjgfu Nmjpfx Aahjhr Please contact Kristoff Van Havere for further information.

Kondisi: baru, Tahun pembuatan: 2025, Band width: max. 38 mm Feed length: max. 50 mm Lsde Ea U Hepfx Aahjhr Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Selectable with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Kondisi: baru, Tahun pembuatan: 2022, Intended use: Construction Unladen weight: 1,415 kg Please contact Kristoff Van Havere for further information. Lodpfopz H Edjx Aahshr

Kondisi: baru,

Kondisi: baru, nomor mesin/kendaraan: wtc1270,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 330 t, Die Maschine ist zum Stanzen, Prägen, Ausbrechen von Abfall und Nutzentrennen konzipiert – verkauft im Ist-Zustand (as is). Das System verfügt über einen Hochleistungs-Bogenanleger, der für einen vollautomatischen NON-STOP-Betrieb ausgelegt ist: • Für vollautomatisches Stanzen, Rillen und Prägen mit oder ohne Greiferrand • Zum Ausbrechen von Innenabfall sowie seitlichen und hinteren Bogenrändern • Für die stapelförmige Ablage gestanzter und ausgebrochener Bogen mit vorhandenen Greiferrändern oder • Für das Abtrennen der Greiferränder mit anschließender stapelförmiger Restbogenablage • Patentiertes Greiferwagen-Registersystem garantiert höchste Passergenauigkeit • Paketstapelmaschine ermöglicht vollautomatische Trennbogenzuführung sowie NON-STOP-Ablage, ohne Umrüstung selbst bei kleinformatigen Zuschnitten (Wechseltisch mit Kammstruktur) • Trennbogenmagazin mit elektrischer Vorratsüberwachung, während des Betriebs nachfüllbar Lhjdpfx Aeww E Nrjahjr • Centerline-Ausrüstung • Automatische Palettenwechselvorrichtung im Ablagebereich Spezifikationen: - Max. Bogenformat: 760 x 1060 mm - Min. Bogenformat: 350 x 400 mm - Maximale Stanzkraft: 3,3 MN (330 t) - Geschwindigkeit: 9.000 Bogen/h Verarbeitbare Materialien: - Papier ab 80 g/m² - Karton bis 2000 g/m² - Wellpappe bis 3 mm (max. Bogenkrümmung 4 %) Ausstattung: - Optische Bogenanlage (Dyset) - Automatischer Non-Stop Anleger - Ausbrechstation - Nutzentrennstation - Centerline - Vollautomatische Palettenwechseleinrichtung Ablage - Inklusive Podest - Schnellspannrahmen in allen Werkzeugstationen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 30 kg, jangkauan lengan: 2.033 mm,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 3.200 h, gaya penekanan: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift +230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Robust base and manipulator in die-cast aluminium construction - Load capacity 60 kg, sheet plus gripper - Low floor track in welded construction - Sheet sensor for contour detection - Rotary union for easy gripper change Gripper coupling on BendMaster - Sensors for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Remote service via internet - Comfort operation via monitor, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper kit without singulation (material for 3 grippers) + Modular vacuum gripper kit with singulation (material for 3 grippers) + Tongs gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-side door for safety fence (or left when combined with ToolMaster) Machine - Robust machine frame in all-steel construction - Press beam - Spherical mounting of the press beam with tilt - Electro-hydraulic upper drive with 4-cylinder technology - Optical setup and positioning aid with control valves - Generous bending clearance - Flat front covers Lhjdpfx Aaexayl Dshsr - Blockwise hydraulics - Electronic pressure scale - Measuring system with glass scale and deflection compensation - Hydraulic oil inside the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge system - 2-axis backgauge system, X- and R-axis Tool clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool shifting, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touchscreen - Network capability - Remote service via internet Operation - Operator console with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety devices - CE marking

Kondisi: bekas, nomor mesin/kendaraan: 006211, Maximum panel width: 4300 mm Maximum panel length: 2200 mm Maximum main saw blade projection: 135 mm Ledpoiwbfuofx Aahehr Number of clamping grippers: 10 Second flexible hold-down device: yes Rotating station: yes

Kondisi: bekas, Tahun pembuatan: 2023, Exhibition Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year of manufacture: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm: 80 Working table height mm: 950 Number of standard clamps: 5 Number of clamps for versions 33/38/43: 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included): 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm: 3300x2100 Version 33 (Opt.) mm: 3300x3200 Version 38 mm: 3800x3200 Version 38 (Opt.) mm: 3800x3800 Version 43 mm: 4300x3200 Version 43 (Opt.) mm: 4300x4300 AXIS SPEEDS Variable saw carriage speed m/min: 6 – 60 Variable pusher speed ( ) m/min: 60 MAIN SAW BLADE Motor power (S6 -40%) - 50Hz (star-delta start) kW (HP): 7 (9) (11) Rotation speed – 50Hz rpm: 4650 Saw blade diameter mm: 340 Main saw blade shaft diameter mm: 80 SCORING SAW Motor power (S6 -40%) - 50Hz kW (HP): 1.5 (2) Rotation speed – 50Hz rpm: 5850 Scoring blade diameter mm: 200 Scoring saw spindle diameter mm: 80 INSTALLATION Installed power kW: 12÷15 Machine base voltage Euro voltage (400 V / 50 Hz) Compressed air requirement NL/min: 300 Required air pressure bar: 7 Extraction air requirement m³/h: 2440 Extraction air speed m/sec: 20 Extraction spigot diameter mm: 4x120 ( ) Note: For countries where EC standards apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL CHARACTERISTICSAutomatically controlled horizontal panel saw with PC/PLC control unit, for cutting panels of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame constructed as steel tube design - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring blade - Vertical lift of the saw blade on linear ball guides and shoes - Guide wheels made of hardened and ground steel - Balanced mass distribution for best cutting quality - Direction of travel against the longitudinal fence - Saw carriage drive via rack and pinion - Carriage runs on cylindrical guides - Cylindrical guides made of hardened and ground steel (5 years warranty), protected by special dust wipers - Pneumatic switch for fast and safe change of main saw blade and scoring bladePressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to avoid collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam for cleaning the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Slides on linear ball guides and shoes.* Travel: 1200 mm* Minimum working width: 60 mm* Maximum working width: 1200 mmPositioning pusher and rear section of the machine - Positioning pusher over the entire length with motor drive via a robust shaft. Positioning pusher... Lhjdpjxyl U Rjfx Aaher

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 48.570 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Merek: MIYANO Tipe: ABX-64SY Tahun pembuatan: 2009 Kontrol FANUC 31i, alat bertenaga, kepala revolver, sumbu C, Lsdpfx Aoxzrpweahjhr konveyor komponen, konveyor serpihan, pengambil komponen, magazin pemuatan batang Multifeed

Kondisi: bekas, Tahun pembuatan: 1994, gaya penekanan: 200 t, panjang meja: 1.780 mm, PRESS DESIGN .. Drive system: Eccentric / Crank .. Frame type: 2-column, tie rod .. Side frame window: yes Lodpfex Nd T Tex Aahjhr .. Bolster cushion: yes .. Material feed direction: left-right PRESS FORCES .. Total rated force: 200 t PRESS TABLE .. Clamping area (left-right): 1780 mm .. Clamping area (front-back): 1300 mm .. Bed opening (left-right): 1445 mm .. Bed opening (front-back): 260 mm SLIDE .. Slide force: 200 t .. Clamping area (left-right): 1500 mm .. Clamping area (front-back): 1100 mm .. Stroke: 178 mm .. Max. strokes per minute: 120 /min SLIDE (MECHANICAL PRESS) .. Slide adjustment: 150 mm .. Min. strokes per minute: 20 /min .. Max. strokes per minute: 120 /min DRAW CUSHION (BOLSTER CUSHION) .. Number of cushions: 11 .. Draw cushion force: 3 t TOOL INSTALLATION DIMENSIONS .. Tool installation height (stroke bottom, slide adjustment top): 542 mm .. Free lateral passage (width): 900 mm COIL UNWINDING UNIT .. Design: Double decoiler .. Max. sheet width: 260 mm .. Max. coil weight: 2 t .. Max. outer diameter of coil: 1500 mm .. Expansion range from: 460 mm .. Expansion range to: 530 mm SHEET STRAIGHTENING UNIT .. Max. sheet width: 250 mm .. Max. sheet thickness: 2 mm .. Min. sheet thickness: 0.3 mm .. Number of straightening rollers: 19 .. Roller diameter: 18 mm .. Min. working speed: 5 m/min .. Max. working speed: 60 m/min .. Loop control: yes FEED UNIT .. Strip feed type: Roller feed .. Max. sheet width: 250 mm TRANSFER SYSTEM .. Tool pitch, stroke X max.: 260 mm .. Tool pitch, stroke X min.: 60 mm .. Fixed stroke Y: 55 mm .. Gripper rail inner width closed max.: 455 mm .. Gripper rail inner width closed min.: 205 mm ELECTRICAL CONNECTION DATA .. Connection voltage: 400 V .. Mains frequency: 50 Hz ADDITIONAL EQUIPMENT (PRESS) .. Decoiler: yes .. Straightener: yes .. Feed unit: yes .. Gripper rail transfer: yes + Strip processing line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper rail transfer SANDER with adjustable pitch + Draw cushion bar with various spacers and cushions (separate data sheet available)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 23.043 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 375 mm, produsen pengendali: Heidenhain TNC 640, berat benda kerja (maks.): 250 kg, kecepatan spindel (min.): 20.000 rpm, daya motor spindle: 35.000 W, Year of manufacture: 2017 CNC control: Heidenhain TNC 640 Axes Travel X-axis (mm): 400 Travel Y-axis (mm): 400 Travel Z-axis (mm): 375 C-axis indexing (degrees): 360º (0.001) B-axis indexing (degrees): -5 / +110º NC milling/turning table: Number of pallets: 30 positions with robot Pallet dimensions (mm): 450 x 400 Max. workpiece weight (kg): 250 Spindle Max. spindle speed (rpm): 20,000 Spindle drive power (kW): 35/25 (40% duty cycle/continuous) Spindle torque (Nm): 130/86 Ljdpfxjx Nhrae Aahehr Cooling Coolant supply through spindle (bar): 40 Tank capacity (liters): 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Chip conveyor Infrared touch probe Rinsing gun NC rotary-tilting table Preparation for 3D quickSET Laser tool measurement for measuring tool length and diameter Direct position measuring system XYZ Spindle active cooling unit MPC – Machine Protection Control Preparation for handling system interface via M65 Paper band filter Machine operating hours: Hours powered on: 43,989 Spindle operating hours: 23,043

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 105981, Pressing force: 45 t Adjustable ram stroke: 20 - 80 mm Ram adjustment: 50 mm Die height (bottom stroke, top adjustment): 300 mm Clearance between uprights L-R: 710 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 700 x 360 mm Pass-through opening in table: 600 x 100 mm Strokes per minute: 80 - 400 min-1 Power requirement: 10 kW Height above floor approx.: 2900 mm Machine weight approx.: 7.2 t Control system: Siemens S7 Ljdpfouqc Ngex Aahjhr Standard equipment: With gripper feed Machine was completely overhauled in 2001 with SIEMENS S7 control.

Kondisi: bekas, nomor mesin/kendaraan: 008113, Lebar maks. panel: 3800 mm Panjang maks. panel: 3200 mm Maks. sorong mata gergaji utama: 75 mm Jumlah penjepit: 7 Lhjdpfx Aaow Iddhsher

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 9.085 h, Sistem hidrolik S.W. tahun 2018, Rototilt R8 cocok untuk alat berat 28.000 hingga 32.000 kg, dilengkapi dengan perangkat gripper dan hammer, stick sekitar 3000 mm, AC, biaya tambahan untuk bucket, kendaraan dapat ditempel atau diberi tulisan iklan. Harga tanpa Rototilt dan tanpa bucket! Penawaran kami pada umumnya tanpa inspeksi TÜV baru. Jika inspeksi TÜV baru diinginkan, kami dengan senang hati akan memberikan penawaran dari bengkel mitra kami! Kendaraan dapat ditempel atau diberi tulisan iklan. Berlaku syarat dan ketentuan pengiriman dan pembayaran umum kami. Ledpfevy Ridjx Aahehr Kami juga siap membuat penawaran pembiayaan atau leasing untuk unit ini. Silakan hubungi kami!

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: 130861, Press force: 50 t Ram stroke: 54 mm Ram adjustment: 80 mm Installation height (stroke bottom, adjustment top): 303 mm Table clamping area approx.: 810 x 550 mm Number of strokes per minute: 65 - 400 min⁻¹ Machine weight approx.: 7.5 t Main drive power requirement: 11 kW Standard equipment Additional equipment IMCO press force measuring device Lsdpfxouqc Hlo Aahshr Automation Gripper feeder, type ZR18ZT1 Max. strip width 180 mm Feed length 150 mm

Kondisi: bekas, jam operasional: 40 h, Kondisi baru, mesin: 6 silinder Cummins, EU Stage V / Tier 4, Adblue, boom mono, lengan sekitar 2.925 mm, bucket buldoser 1.200 mm, perangkat gripper dan hammer, pelat alas 600 mm, kabin, AC, joystick proporsional, kamera mundur dengan monitor di kabin, pencahayaan, radio, Bluetooth, pemanas. Kendaraan dapat diberi stiker iklan dan/atau tulisan. Penawaran kami secara umum tanpa pengujian TÜV baru. Jika pengujian TÜV baru diinginkan, kami dengan senang hati akan memberikan penawaran dari bengkel mitra kami! Kendaraan dapat diberi stiker iklan dan/atau tulisan. Syarat dan ketentuan pengiriman serta pembayaran kami berlaku. Ljdsxyccfepfx Aahjhr Kami juga dapat menawarkan skema pembiayaan atau leasing untuk objek ini. Silakan hubungi kami!

Kondisi: bekas, berat muatan maksimum: 22.590 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 07/1989, DIEBOLT semi-trailer teleskopik dua sumbu dengan crane kayu di leher angsa, perpanjangan area muat hingga sekitar 15.540 mm, gripper Loglift, penyangga lantai, 1x ekstensi hidrolik, kontrol gripper, kontrol kursi tinggi, as BPW, ban ganda, sistem rem tromol, suspensi daun, coupling derek, kendaraan dapat dilapisi dan/atau diberi tulisan iklan. Lsdpfx Aasxf S D Ajhjhr

Kondisi: bekas, jarak tempuh: 313.010 km, daya: 180 kW (244,73 hp), pendaftaran pertama: 02/1998, jenis bahan bakar: diesel, berat keseluruhan: 19.000 kg, konfigurasi gandar: 2 gandar, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: euro2, lebar total: 2.550 mm, tinggi total: 4.000 mm, volume ruang muat: 5 m³, panjang ruang muatan: 4.000 mm, lebar ruang muat: 2.370 mm, tinggi ruang muatan: 500 mm, Perlengkapan: ABS, derek, penggerak semua roda, 3-way tipper body, ATLAS mid-mount crane, Type: AK 140.1 A3, dual hydraulic outriggers, gripper control, 3-stage hydraulic extension, max. lifting capacity 6,000 kg, load chart: approx. 4.30 m – 3,060 kg, 6.2 m – 2,030 kg, 8.1 m – 1,510 kg, 10.1 m – 1,200 kg, technically possible: crane with 3 mechanical extensions up to 12.1 m – 920 kg, 14.0 m – 730 kg, 15.9 m – 600 kg outreach, all-wheel drive, ABS, differential locks, hill-start assist, cruise control, standard driver’s air-suspension seat, rear window, roof hatch, heated exterior mirrors, sash window, headlight guards, 2 x revolving beacons, air horns on cab roof, vertical exhaust, leaf suspension, 1x storage box, vehicle may be stickered and/or lettered with advertising. Lhedpfev Ruk Hsx Aahjr Our offer does not generally include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops! Vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing quote for this unit. Please contact us!