Beli Hedelius bekas (31)

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 520 mm, CNC control Heidenhain iTNC530 NC rotary-swivel table on the right Fixed integrated table on the left 30-position tool changer Electronic handwheel Internal coolant supply (20 bar) Chip conveyor Technical details: X-axis travel: 1200 mm X-axis travel on rotary-swivel side: 500 mm X-axis travel on fixed table side: 570 mm Y-axis travel: 650 mm Z-axis travel: 520 mm A-axis: +90 / -110° C-axis: 360° Spindle taper: SK40 Spindle speed range: 30–8000 rpm Feed rate: 0–45,000 mm/min Swivel rotary table dimensions: 520 x 420 mm Interfering edge diameter: 610 mm Support bearing height: 90 mm Fixed table dimensions: 700 x 600 mm Number of tool magazine stations: 30 Prodpfxjtu S Ire Ab Iod Drive power: 22 kW Weight approx.: 8,500 kg Technical data, accessories, and machine description are not binding.

Kondisi: bekas, Tahun pembuatan: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control system: Heidenhain TNC 640 Swivel range -98 to 98 degrees Rotary table diameter 750 mm Total power requirement 29 kW Machine weight approx. 16 t Hedelius Gantry-Type Machining Centre Tiltenta 7 Magnum with infinitely variable swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW / 117 Nm main spindle drive 50-12000 rpm, 50-position tool magazine and integrated NC rotary table in the stationary machine table. Machine Equipment: T7M-3200, Operation mode 3 - High-pressure pump 50 bar - Heidenhain TNC 640-T Series - Spindle speed 12,000 rpm / 29.0 kW - Extended swivel range TNC/T - Handheld control unit HR 510 - Standby magazine SK40/190 - Taper cleaning station - Slant bed coolant system 900 l - Internal coolant supply 25 bar - Pre-filter for slant bed coolant system - Electrostatic exhaust filter T / 2x1300 Psdpfxowfqqko Ab Isrd - Compressed air nozzle at spindle head - Internal compressed air supply - Blow-off pistols - Washdown pistols - Infrared receiver M&H 91.40 - 3D infrared probe M&H 25.50 - Toolsetter M&H 35.70 - Work area partition wall T7 with sliding door Control on: 33,163:56:22 Machine on: 24,185:07:21 Program run: 16,784:12:57 Spindle: 11,751:13:08

Kondisi: baik (bekas), Tahun pembuatan: 2000, Ref. No.: 10588 Manufacturer: HEDELIUS Model: CB 70 - 3200 Year of manufacture: 2000 Control type: CNC Prjdpfx Absxvw N Ee Ijd Control system: Heidenhain TNC Location: Halberstadt Country of origin: Germany Machine serial no.: 0032XXXX Required floor space: 7200 x 3400 x 3100 mm (L x W x H) X travel: 3200 mm Y travel: 720 mm Z travel: 600 mm Table height: 900 mm Number of T-slots: 5 Max. workpiece weight: 3000 kg Max. tool length: 330 mm Clamping surface: 3900 x 650 mm T-slot width: 18 mm T-slot spacing: 125 mm Tool holder: DIN 69871 AD 40 Spindle speed: 30 - 8000 rpm Maximum torque: 102 x 240 Nm Feed rates X/Y/Z axes: 30000 mm/min Rapid traverse X/Y/Z: 30 / 30 / 30 mm/min Total power consumption: 50 kW Boring diameter: 28 x 44 mm Max. feed force: 9000 / 9000 / 9000 kN Distance spindle nose to table: 140 - 740 mm Number of tools: 30 pcs Tool clamping: Disc spring Max. milling capacity: 400 x 600 Max. tapping diameter: M20 x M30 mm Coolant pressure: 250 bar Additional information: - L = 7.50 m: Special accessory automatic door - H = 3.60 m: Special accessory full enclosure of machining area - Ø 125 mm only with free adjacent slots 35 mm The machine can be inspected under power by prior arrangement.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Data Umum Berat mesin: 29.000 kg Penggerak Utama Kecepatan spindle: 6.000 rpm Jumlah sumbu: 5 Prsdpfx Asxwqt Hjb Iod Pergerakan Pergerakan Sumbu X: 3.500 mm Pergerakan Sumbu Z: 770 mm Pergerakan Sumbu Y: 1.000 mm Mesin 5-axis HEDELIUS RS 100 K MAGNUM ini diproduksi pada tahun 2009. Mesin ini memiliki jarak gerak 3.500 x 1.000 x 770 mm dan meja putar-miring dengan kapasitas beban benda kerja maksimal 1.200 kg. Spindle beroperasi pada kecepatan hingga 6.000 rpm, dan mesin dilengkapi dengan majalah alat kapasitas 50 buah. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin HEDELIUS RS 100 K MAGNUM yang kami tawarkan. Silakan hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: X-axis travel: 2500 mm Y-axis travel: 1000 mm Z-axis travel: 750 mm Table size: 3220 x 1000 mm Max. workpiece weight: approx. 3000 kg Spindle taper: ISO 50 Spindle speed range: 20 – 5,000 rpm Feed rate: 1 – 30,000 mm/min Rapid traverse: 30 m/min Prsdevptmwjpfx Ab Ied Total power requirement: 40 kW Floor space required (approx.): 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with CNC control HEIDENHAIN TNC 426 30-station automatic tool changer RENISHAW touch probe Coolant system with internal coolant supply (IKZ) and chip conveyor Various tool holders

Kondisi: bekas, Tahun pembuatan: 2008, x-axis travel 1800 mm y-axis travel 510 mm z-axis travel 480 mm Psdpfx Absxuv Sve Isrd Machine weight approx. 5500 kg ISO40 Tool changer with 20 positions

Kondisi: bekas, Tahun pembuatan: 2012, de__9f5d17-81dc-4848-a061-42d7f4776bfd Predpfx Abew Np A Ss Isd

Kondisi: bekas, Tahun pembuatan: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm Spindle taper SK40 Speed range 50 - 12,000 rpm Number of tools in magazine 30 pcs Table clamping surface 3900 x 750 mm Rapid traverse x/y/z 12/12/12 m/min Total power requirement 29 kW Machine weight approx. 15,000 kg Space requirements approx. 7200 x 3500 x 3100 mm CNC travelling column machining centre Hedelius Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - ICS 15 bar - SK40 tool holders - Operating manual The following repairs were carried out in 07/2022: - Guide carriage of X-axis - Various pneumatic hoses - Safety glass of loading doors - Various illuminated push buttons - Door safety actuators - X-axis cover (lamella) - ICS filters (4 pcs) - Filter cabinet Pedpfxsv S Irts Ab Ijrd - Timing belt Z + Y axis - Door wipers with damper - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles external cooling - 2x bellows of Y-axis - 1x set of door rollers with rail (6 meters) - 1x Klüber grease with taper extractor

Kondisi: baik (bekas), Tahun pembuatan: 2008, 10581 Prodexvw Nlepfx Ab Ijd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, x-Weg 1800 mm y-Weg 520 mm z-Weg 520 mm Steuerung iTNC 426-M Spindeldrehzahl: 8000 UpM Tischgröße 2300 x 420 mm Eilgänge x/y/z 30 m/min Werkzeugaufnahme SK 40 Tischbelastung 3 t Werkzeugmagazin mit 30 Plätze Spindelmotor 22 kW Prsdpfx Aboxg R Hrj Ied Drehmoment an der Spindel 220 Nm Maschinengewicht ca. 5,5 t Raumbedarf ca. 3 x 5 m 3 Achs Vertikal-Bearbeitungszentrum Hedelius, Mod. CB 50 - 1800 mit Steuerung Heidenhain iTNC 426-M. Es handelt sich um ein Gebrauchtobjekt, daher verkaufen wir unter Ausschluss jeglicher Gewährleistung. LAGERHALTENDER HAENDLER MIT AUSSTELLUNGSHALLE VON 1600 m².

Kondisi: bekas, Tahun pembuatan: 2005, Vertical Machining Centre HEDELIUS - C 60 / 2000 x-axis travel: 2,000 mm y-axis travel: 620 mm Predpsvnvz Iofx Ab Isd z-axis travel: 520 mm Control: Heidenhain iTNC 530 Spindle speed range: 30 - 12,000 rpm Torque: 121 Nm Main spindle drive power: 21 kW Tool holder: SK 40 Table clamping surface: 2,500 x 600 mm Max. table load: 2,000 kg Number of T-slots: 5 T-slot (size): 18 H8 Number of tool stations: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets empty: 125 mm Max. tool length: 330 mm Max. tool weight: 8.5 / 15 kg Chip-to-chip time: 6.0 sec Tool-to-tool change time: 3.0 sec Total power requirement: 25 kVA Machine weight approx.: 10.5 t Dimensions approx.: 8.0 x 4.0 x 3.5 m Spindle run time: approx. 12,045 h Including: - Hofmann RT 320 NC rotary table - Centre height: 220 mm - Max. rotation speed: 22 rpm - Drive torque: 500 Nm - Weight: 135 kg - Hofmann RE-40 / 220 tailstock - Taper: MK 3 - Quill stroke: 40 mm - Centre height: 220 mm - incl. 2x chucks - incl. spare pump - incl. jaws - WITHOUT clamping devices, WITHOUT tools

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Travel X: 2500 mm Travel Y: 800 mm Travel Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Podpexa Hl Dofx Ab Ierd Tool changer: 40 stations Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special features: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Rinse guns - Renishaw TS27R tool measurement system - Renishaw infrared workpiece measurement system - Ethernet connection - Handheld control module Other information: - Ball screws X and Y replaced in 2018 - Complete documentation available Machine weight: approx. 20 t Space requirements: 6.5 (width) x 3.8 (depth) x 3.7 m (height) This HEDELIUS BC80 is in good condition and can be inspected under power by arrangement with the owner.

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 1200 mm y-travel 620 mm z-travel 520 mm Control Heidenhain iTNC 530 Clamping table surface 1550 x 600 mm Table load capacity 1500 kg Rapid traverse 45 m/min Spindle speed range 8,000 rpm Tool holder SK 40 Number of tools in magazine 30 pcs Machine weight approx. 9.0 t Dimensions L x W x H 5.1 x 2.6 x 2.85 m Vertical travelling column machining centre. - Chip conveyor Psdswc Dyyopfx Ab Isrd - External handwheel - 3D probe - Coolant gun

Kondisi: bekas, Tahun pembuatan: 2001, 47b3d0c7 Psdpfovh R Txox Ab Ierd

Kondisi: baik (bekas), Tahun pembuatan: 2007, 10473 Pedpfxjxvw Hws Ab Ijrd

Kondisi: bekas, Tahun pembuatan: 1998, hedelius_bc40d20_de_basics Prodpfx Aexddq Sjb Iod

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 002840, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 520 mm, berat keseluruhan: 9.000 kg, - Tahun pembuatan: 2000 - Tangan pertama dan penggunaan sendiri - Berfungsi penuh, dalam kondisi terpasang listrik, siap untuk demonstrasi - Kontrol: Heidenhain TNC 426 - Majalah alat: 30 tempat - Perjalanan sumbu X: 1800 mm - Perjalanan sumbu Y: 520 mm - Perjalanan sumbu Z: 520 mm - Operasi pendulum: 2 x 700 x 520 mm - Sistem filter belt tekanan tinggi / IKZ Psdexgq A Tepfx Ab Iord - Pendingin melalui spindle: 20 bar - Konveyor sabuk silang: 50 x 1800 Harga bersih tidak termasuk bongkar, lokasi Luckenwalde (Jerman) tanpa transportasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 770 mm, berat benda kerja (maks.): 3.500 kg, kecepatan spindel (maks.): 7.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area Travel X-axis: 2,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 770 mm Spindle nose distance: 890 mm Number of machining axes: 3 Table Clamping area left-right: 3,220 mm Clamping area front-back: 1,000 mm Workpiece weight: max. 3,500 kg Spindle / Head Speed range: up to 7,000 rpm Drive power: 40 kW Tool Magazine Number of tool positions: 50 Workpiece Automation Type of storage: Magazine Control System Control type: CNC Control model: Heidenhain ITNC 530 Prodpjwztphsfx Ab Isd MACHINE DETAILS Electrical Data Connection voltage: 400 V Dimensions & Weight Footprint left/right: 6,500 mm Footprint front/back: 5,000 mm Overall height: 3,700 mm Total weight: approx. 22,000 kg EQUIPMENT Chip conveyor: yes High-pressure pump Magnetic plates are not included in the scope of delivery (optional for an additional €15,000). Machine will be provided partially dismantled, ready for collection from shop floor level.

Kondisi: bekas, Tahun pembuatan: 2005, x-travel 2000 (775 + 600) mm y-travel 620 mm z-travel 520 mm Control system Heidenhain iTNC 530 Spindle speed range - main spindle: 12,000 rpm Drive power - main spindle: 18 kW Table clamping surface: 1,200 x 600 mm Rotary table diameter: Ø 500 mm tiltable +15/-95° rotatable 0-360° max. table load: 1000/350 kg Tool holder: SK 40 Number of tool stations: 30 positions Internal coolant supply: 20 bar Rapid traverse (X / Y / Z): 30 m/min Dimensions L x W x H: 5.0 x 2.5 x 3.3 m Machine weight approx. 11 t Universal CNC machining center with 5 axes and fixed table for pendulum operation, completely overhauled for €60,000. - NC rotary tilting table in the right machining area - Fixed table in the left machining area - 4th axis on fixed table, 165 mm center height - Internal coolant supply - Dual cartridge filter - Chip conveyor - Partition wall for pendulum operation - External handwheel - KinematicsOpts - 3D probe IR - Oil mist extractor Pedpfx Abexbh D Dj Iord - Motorized "roll roof" above the machine - Overhaul in 2022/2023 for €60,000 All guideways + ball screws replaced - Pendulum mode - First commissioning in 2006 - Replacement spindle in 2016 at approx. 21,000 spindle hours.

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel 2000 mm Y-axis travel 620 mm Z-axis travel 520 mm Table size 2500 x 600 mm Max. workpiece weight 2000 kg Tool holder SK40 Control HEIDENHAIN Spindle speeds 30 - 8000 rpm Feed rate 45 m/min Rapid traverse 45 m/min Total power requirement 20 kW Machine weight approx. 10,500 kg Space requirement approx. 5400 x 3300 x 3000 mm Equipment: Podpjulnbksfx Ab Isrd - Heidenhain iTNC 530 control - Tool magazine with 30 positions - Chip conveyor - Sieve filter system with high-pressure coolant (IKZ) - Operating manual Optional (on request): - Wireless probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 720 mm, jarak gerak sumbu Z: 600 mm, model controller: Heidenhain TNC, berat benda kerja (maks.): 3.000 kg, 001 Prjdpfsxn Nd Sox Ab Iod

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 770 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, lebar meja: 1.000 mm, panjang meja: 4.150 mm, beban meja: 4.000 kg, 3-Axis Machining Centre Manufacturer: Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Table load capacity: 4000 kg Feed rate X-axis: 30,000 mm/min Psdowycmmspfx Ab Isrd Feed rate Y-axis: 30,000 mm/min Feed rate Z-axis: 30,000 mm/min Tool holder: ISO 50/BT/MK Spindle power: 50 kW Spindle speed: 4500 rpm Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: Yes Coolant system: Yes Length: 8000 mm Width: 5000 mm Height: 3700 mm Weight: 30,000 kg

Kondisi: bekas, Tahun pembuatan: 2011, Travel path - X axis: 570 / 500 (1,070) mm Travel path - Y axis: 650 mm Travel path - Z axis: 530 mm Control: HEIDENHAIN iTNC 530 Prodpfswlvraox Ab Ijd Spindle speed: 12,000 rpm Tool holder: SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, internal coolant supply (50 bar), zero-point clamping system, and chip conveyor. The machine has only 7,863 spindle hours. A comprehensive tool package is included in the scope of delivery. The machine is in well-maintained condition. Please refer to the original order confirmation attached to the offer for further equipment details. #Tags: RS605 K IC 40 | RS-605 | RS 605

Kondisi: bekas, Tahun pembuatan: 1995, x-travel 1700 mm y-travel 400 mm z-travel 400 mm Control Siemens 480 D Number of axes 4 pcs. Table width 500 mm Table length 2000 mm Tool holder DIN 2079 SK 60 SK 40 Total power requirement 16.25 kW Machine weight approx. 4750 kg Space requirement approx. 3000 x 2500 x 2800 mm Machine number 9599 - 4th axis / horizontal / diameter 315 mm Psdpfx Aovf Rhweb Isrd - Chip conveyor - 20-position tool changer

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 026375, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 620 mm, jarak gerak sumbu Z: 520 mm, berat benda kerja (maks.): 2.000 kg, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 620 mm Pjdpfx Abowtq Tuo Ierd Z-axis travel: 520 mm Rapid traverses X-Y-Z: 30 - 30 - 30 m/min Table size: 2,500 x 600 mm Maximum load capacity: 2,000 kg MACHINE DETAILS Weight: 10,500 kg Voltage: 400 V Frequency: 50 Hz Total connected load: 25 kVA