Beli Hidrolik Press bekas (14.789)

Kondisi: bekas, Dijual mesin industri profesional. Press hidraulik untuk membengkokkan kayu. SNERVATORE 2000/120-70 dari produsen Italia terkemuka Vecchiato Valter & C. s.n.c. – spesialis dalam press hidraulik dan peralatan pembengkok kayu. Spesifikasi teknis: • Model: SNERVATORE 2000/120-70 • Tahun produksi: 2008 • Daya: 2,2 kW • Daya listrik: 380 V / 50 Hz • Tekanan oli maksimum: 200 bar • Berat: sekitar 3150 kg • Nomor seri: 14/08 • Asal produksi: Italia Cgsdpfx Aajx H Sz Hs Tep Mesin kokoh dengan konstruksi industri berat, dirancang untuk kerja intensif di bengkel kayu dan pabrik produksi. Ideal untuk pemrosesan profesional elemen kayu.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Press rangka hidrolik Mesin lengkap dan berfungsi penuh Cgsdsxmr Spspfx Aa Tsp Rentang kerja 3000 x 2000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi kerja penuh dan dalam keadaan baik. Dimensi kerja: 3200 x 2200 mm Pengaturan dimensi dikontrol secara elektrik dari panel kontrol. Ditenagai oleh unit hidrolik. Codpjxmr Rxofx Aa Tjgp

Kondisi: bekas, Single-column hydraulic press HIDROLIKSAN, model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight opening: 495 mm Table dimensions: 900 x 700 mm Ram face: 900 x 700 mm Maximum tool weight: 500 kg Table height above floor: 1000 mm Hydraulic working pressure: max. 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 Volt, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control panel or manually via the control system - SIEMENS S7 1200 control system with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection for safe operation Cedpfx Aaoxf Uqre Togp - Ram stroke, pressing force, and stroke speed programmable via the control system - Pressure and stroke shut-off - Dwell time continuously programmable - Ram equipped with direct position measuring system - Control cabinet with electrical controls mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV (accident prevention inspection) for hand-insertion work, last inspected October 2024 Required space (L x W x H): 2300 x 1700 x 2750 mm Weight: 8 tons Very good condition

Tahun pembuatan: 2020, Kondisi: hampir baru (bekas), Pressure: 150 t Stroke: 500 mm Approx. machine weight (without operating fluids): approx. 8.5 t Dimensions (L x W x H): 1200 x 1800 x 3100 mm Motor power: 10 kW Max. working height: 1000 mm Max. feed speed: 9.9 mm/sec Pressing speed: 100 t = 9.9 to 0 mm/sec Table height above floor level: 1000 mm Lubrication for guides: grease nipples Column diameter: 230 mm chrome-plated Return speed: 25 mm/sec Hydraulic tank: 500 l Oil requirement: approx. 400 l Perimeter maintenance platform: 5800 ? Enclosed side panels left and right: 3900 ? Cgjdpfxedxvfij Aa Top Rear enclosed: 2800 ? Front light curtains for higher speed, only with maintenance platform and rear closed: 4800 ? Tripling of speed, only with maintenance platform, enclosed sides and rear: 29000 ? Siemens S7 1200, monitor control with 12" monitor and Pilz safety technology: 8200 ? Steel quality: LCG engineering steel ASTM A36, manufactured in accordance with DIN 8651 All parts in contact with salt are made of stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, nomor mesin/kendaraan: DF0240 - Rev.00, Pressure: 300 t Clear width: 600 mm Stroke: 500 mm Approx. machine weight (without operating fluids): 8.5 t Dimensions (L x W x H): approx. 2275 x 1650 x 4050 mm Return force: 30 t Cgsdpfxodxvfks Aa Tep Motor power: 30 kW Max. working height: 800 mm Max. feed speed: 10 mm/sec Press phase speed: 10 mm/sec Travel distance: 500 mm Ram plate: 600 x 600 mm Table plate: 600 x 600 mm Table height above floor: 850 mm Oil tank: 350 l Oil cooling (electric): 1.5 kW (max) Ejector stroke: 250 mm Ejector force: 50 t Peripheral maintenance platform: 2,800 € Oil drip tray: 2,800 € Upper and lower tool (for 8 kg salt block): 11,000 € Automatic filling with 500 kg storage: 58,000 € Speed increase to 80 mm/sec: 19,000 € Each additional meter of conveyor belt: 850 € Light barriers front and rear: 6,800 € Side paneling: 4,200 € 7 m roller conveyor – for salt block transport and intermediate storage: 12,900 €

Kondisi: baru, nomor mesin/kendaraan: DF0238 - Rev.00, Pressure: 20 t Passage width: 400 mm Stroke: 300 mm Machine weight approx. (without operating fluids): 3 t Dimensions L x W x H: 2200 x 650 x 2540 mm Drive power: approx. 4.5 kW Table plate: 400 x 400 mm Ram plate: 400 x 400 mm Clear height: 300 mm Table height above floor approx.: 950 mm Cgedpfx Aefxyhbea Top Pressure adjustment (in 2t increments): 2 - 20 t Siemens control system: S7 1500 Equipment: Automatic vertical door Electric oil cooler for hydraulic oil Warm air extraction with 150 mm extraction nozzle, with fan, outlet at the top of the press Heating plates separately controllable Heating capacity max. 300°C, digital display, adjustable from 50°C to 300°C in 5°C increments Tolerance ±5°C Constant pressure maintenance with a tolerance of 5% Cooling via built-in circulation pump, monitored, connection to external water supply Functions: Pressure, speed, temperature, heating time, and holding positions adjustable via control system Ventilation intervals adjustable All values are documented and can be exported as an EXCEL file. At an additional cost of 15,000 euros, we can supply a built-in high-capacity cooling unit for the machine.

Kondisi: bekas, Tahun pembuatan: 2017, Pressure: 500 t Pass-through width: 1300 x 800 mm Stroke: 600 mm Approx. machine weight: 18 t Space requirement approx.: 2400 x 2400 x 5500 mm Return force: 50 t Operation: Two-hand control Cylinders: 1 piece Motor: 50 kW Oil cooling: electric Column diameter: 200 mm Working height (distance between ram & table plate): 700 mm Table size: 1900 x 800 mm Table height above floor approx.: 1000 mm Ram plate: 1300 x 800 mm Approach speed: 150 mm/sec Working speed: 5–10 mm/sec Return speed: 150 mm/sec Oil tank: 1500 l Oil quantity: 1400 l Control system functionality: The linear scale continuously communicates the position of the ram and ejector to the control unit. The travel path, upper stop point, and the switching point at which the press changes from rapid traverse to working speed—along with the target end position—can all be easily and quickly input via the monitor control. The working speed can be set in 1 mm/sec increments from 2 to 15 mm, and in 10 mm increments from 15 up to 150 mm. Additionally, the machine features pressure monitoring, which can either automatically return the ram to the upper position upon reaching the desired pressure, or maintain pressure at the set value (with ±5% tolerance) for a configurable time before opening. The control system monitors all safety zones, the complete hydraulics, the pumps, and the temperature. It also controls the synchronization of the main cylinders and compensates for uneven loads accordingly. The control is housed in an attached electrical cabinet. Operation of the press itself is performed via an adjustable two-hand control, reducing operator movements. Further information: Cgedpod E Irmofx Aa Tjp Included in the offer are detailed 3D drawings, which must be checked and approved by the customer. Columns and cylinders are made of tool steel, induction hardened and chrome plated on the outside. Ram guides are manufactured using bronze sliding bushings. Scope of delivery includes: ? Manuals and operating instructions for the motors, pumps, and the press itself, as well as the CE Declaration of Conformity (each in duplicate) ? Safety inspection by a qualified company ? The machine complies with the EU Machinery Directive 2006/42/EC for hydraulic presses and with DIN EN 693/2011

Tahun pembuatan: 2019, Kondisi: baru, nomor mesin/kendaraan: DF0364, Pressure: 20 t Passage width: 500 mm Stroke: 250 mm Machine weight approx. (without operating fluids): 2.6 t Dimensions L x W x H: 1200 x 1400 x 2900 mm Drive power: 11 kW Table plate: 450 x 400 mm Table cutout: 150 x 150 mm Table height above floor approx.: 900 mm Max. working height: 500 mm Return force: 2 t Feed speed: 300 mm/sec Pressing speed: 50 mm/sec Csdpfx Aasfxykzs Togp Rapid traverse speed: 300 mm/sec Travel distance: 250 mm Oil tank: 250 l Oil cooling (electric): 1.5 kW (max) Monitor: Siemens 10 inch

Kondisi: baru, Tahun pembuatan: 2025, C-FRAME EINSTUFIGE HYDRAULIKPRESSE MODELL CFSS100 / 100 TONNEN Stößelzylinder-Kapazität (Tonnen): 100 t / 250 bar Min. Arbeitsdruck: 30 bar Max. Arbeitsdruck: 250 bar Hauptzylinderdurchmesser: Ø220 mm * 1 Stk Hilfszylinderdurchmesser: Ø50*35 mm * 2 Stk Tischgröße (mm): 800 x 500 mm Hub (mm): 400 mm Lichte Weite (mm): 500 mm Eilgang (mm/s): 110 mm/s Rücklaufgeschwindigkeit (mm/s): 160 mm/s Arbeitshubgeschwindigkeit (mm/s): 10 mm/s Motor (kW): 11 kW Cgsdpfx Aajwbtihs Top Pumpe (Liter): 26 l / 19 ccm Gesamtmaße (LxBxH): 1900 x 1700 x 2930 mm Gewicht (kg): 5.500 kg

Kondisi: baru, Tahun pembuatan: 2025, H-Rahmen Doppelwirkende Hydraulikpresse MODELL HDD 400 / 400 t Codpswbtn Rofx Aa Togp Zylinderkraft (Stößel) (t): 400 t Min. Arbeitsdruck (bar): 30 bar Max. Arbeitsdruck (bar): 250 bar Hauptzylinder-Durchmesser: Ø 420 mm, 1 Stk. Hilfszylinder-Durchmesser: Ø 100 x 60 mm, 2 Stk. Tischgröße (mm): 1500 x 1200 mm Hub (mm): 1000 mm Lichte Weite/Öffnung (mm): 1400 mm Eilgang (mm/sec): 1400 mm/sec Rücklaufgeschwindigkeit (mm/sec): 200 mm/sec Arbeitsgeschwindigkeit (mm/sec): 2–12 mm/sec Ziehkissenkraft (t): 200 t Ziehkissenhub (mm): 400 mm Auswerferkraft (t): 10 t Auswerferhub (mm): 300 mm Motorleistung (kW): 37 kW Pumpenleistung (cc): 100 cc Gesamtmaße (LxBxH): 2550 x 3500 x 6100 mm Gewicht (kg): ca. 26.000 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar meja: 1.800 mm, panjang meja: 2.700 mm, Press hidrolik lengkap dalam kondisi kerja baik, dengan 12 pelat berukuran 2700/1800 mm. Csdpfx Aaexzgplo Tjgp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 6.000 mm, tinggi pemasangan: 1.000 mm, lebar total: 2.400 mm, panjang total: 3.500 mm, gaya penekanan: 500 t, lebar meja: 1.500 mm, panjang meja: 2.000 mm, berat keseluruhan: 45.000 kg, kapasitas tangki oli: 1.200 l, Perlengkapan: penghadang cahaya keselamatan, HIDROLIKSAN HCFP – 500 t Hydraulic Tryout / Test Press for Tool and Forming Technology This machine is a tryout/test press specifically designed for tools used in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. Construction features a robust 4-column design, offering a generously sized working area. The hydraulic system is equipped with REXROTH pump technology. Operation and control are provided by a SIEMENS S7-1200 system with touch panel, offering extensive parameter configuration options. Scope of Supply & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roller block / support console 10 t (GÜTHLE) - 4-channel tool holding system (length 1,500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Machine Condition - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electrics in good condition - Mechanically solid, no visible damage - Machine remains assembled and can be demonstrated under power Pressing Force: - Rated force: 500 t Csdpfxsx D Tv Ds Aa Tjgp - Max. pressing force at 250 bar: approx. 510 t Dimensions & Weight - Approx. total dimensions: 3,500 × 2,400 × 6,000 mm - Approx. total weight: 45,000 kg Working Area - Table size: 2,000 × 1,500 mm - Inner column spacing: 2,000 × 900 mm - Installation height: 1,000 mm - Stroke: 800 mm (linearly adjustable via linear measurement system) - T-slots available (configuration by customer) Hydraulic System Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary / Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank - Pump: REXROTH axial piston, 100 ccm, approx. 150 L/min - Hydraulic tank: 1,200 L - Oil system: 1,000 L capacity Speeds - Advance stroke: 120 mm/s - Return stroke: 150 mm/s - Working / press stroke: 12 mm/s Control & Safety - Controller: SIEMENS S7-1200 + ET200S - 12" Schneider Electric touch panel Operating modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep-drawing mode with die cushion Measurement & safety components: - Novatechnik linear measuring system (63 bit) for slide & die cushion - SICK light curtains front and rear (height: 1,050 mm) - Side safety fences with limit switches - Remote maintenance via Ethernet possible - Mobile control panel International Notice Block (DE/EN) German Dismantling, deinstallation, loading and transport are carried out exclusively by the buyer, at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection is only possible by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices, or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Kondisi: bekas, Pressure 10 t Stroke 400 mm Codpfsd R Szusx Aa Tsgp Downward speed from 200 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 8.5 kW Machine weight approx. 1.3 t Space requirements approx. ... m - Without clamping plate - Approved only for operations with closed tooling

Tahun pembuatan: 2020, Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: DF0317, Pressure: 400 t Passage width: 600 mm Codpod E Irhefx Aa Tsgp Stroke: 400 mm Machine weight approx. (without operating fluids): 14 t Dimensions L x W x H: 2380 x 1680 x 3580 mm Motor power: 36 kW Max. working height: 750 mm Max. feed speed: 10 mm/sec Pressing speed: 10 mm/sec Column diameter: 230 mm Return force: 40 t Rapid traverse speed: 25 mm/sec Travel distance: 500 mm Oil tank: 600 l Oil cooling: 1.5 kW Conveyor belt length: 6 m Monitor: WEG 12 inch Light barriers front and rear: 6800 ? Side paneling: 4200 ? Speed upgrade to 80 mm/sec.: 19000 ? Each additional meter of conveyor belt: 850 ? Steel quality: Engineering steel LCG ASTM A36, manufactured according to DIN 8651 All components that come into contact with salt are made of stainless steel

Tahun pembuatan: 2021, Kondisi: baru, Here are the technical specifications of the machine on offer: If the press does not exactly meet your requirements, simply request a customized offer tailored to your needs with just one click: Contact us for a personalized quotation. HIDROBRASIL manufactures presses exactly to your specifications at surprisingly competitive prices! Technical data and information: Hydraulic 50 T laboratory heating press This is a downstroke press with an open height of 400 mm Ram stroke: 300 mm Heating plate performance up to 250°C Heating plate size: 200 x 200 mm Weight: approx. 1,500 kg Height: 1,950 mm Hydraulics integrated into the press frame Hydraulic reservoir: 100 l Monitored vertical safety door for the press area Pressure, position, and speed adjustable via SIEMENS S7 1200 SIEMENS 9-inch touchscreen display Safety technology supplied by SICK (C-frame press, hydraulic press, laboratory press) Are you looking for a machine customized to your needs? Cedpfxogrkige Aa Tegp Contact us for an individual quotation. Our hydraulic presses are manufactured in accordance with the German Machinery Directive, as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety regulation NR 12, which builds upon these standards. Our main strength lies in special-purpose machine construction and press automation. We offer tailored hydraulic presses, press brakes, and guillotine shears at surprisingly attractive prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2023, nomor mesin/kendaraan: 7YXXX, VIS G ist die ideale und effizienteste Lösung für die Schrottverarbeitung wie Stanzteile, Abschnitte und Drähte und wird vor allem für die Automobilindustrie, Metallrecycler sowie die Nichteisenmetall-Recycling- und Umschmelzindustrie empfohlen. Cgjdpfemqi Akex Aa Tep

Kondisi: baru, Technical Data: Capacity: 200 t Installation height: 900 mm Max. working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Cgsdspl T Diepfx Aa Tep Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight (approx.): 2600 kg Features: - Laterally adjustable cylinder via rack-and-pinion with handwheel - Spacious working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Your benefits: - One of the heaviest-duty models on the market - Available with capacities up to 500 tonnes - Maximum performance and stability - Different frame widths available on request - Hydraulics cylinder horizontally repositionable, handwheel, rack, and pinion (from 160 t) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Panjang rak: 3000 mm Lebar rak: 1300 mm 6 piston hidrolik Diameter piston: 70 mm Cedpfx Aajw Nqnvs Togp Saklar pengaman – tali tarik darurat Pemanas oli elektrik Berat: 3300 kg Pelapis rak aluminium baru Tahun pembuatan: 2013

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 818 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 350 t, panjang langkah: 890 mm, masa garansi: 12 bulan, 📋 Technische Daten (German) Kapazität: 350 t bei 250 bar (inklusive Hilfszylinder) Cjdpfexf Dzgex Aa Tegp Hauptzylinder: Ø395 mm, Kolbenstange Ø300 mm, Hub: 890 mm Hilfszylinder: Ø80 x 100 mm, Kolbenstange Ø50 mm, Hub: 890 mm Polsterzylinder: Ø180 x 230 mm, Kolbenstange Ø115 mm (4 Stück) Motor: 18,5 kW – 25 PS, 1.500 U/min, IE3, 380 V Pumpe: 71 ccm, 105 L/min, variabler Förderstrom, druckkompensierte Axialkolbenpumpe (Taiwan, Import) Ventilblock: NG-16, 24 V DC, P-Q Proportionalregelung Ausgestattet mit präziser Proportionalregelung für alle Bewegungsabläufe: Pumpenschutzventil, Entlastungsventil, Stößel–Polster-Leitung, Drucktransmitter, Hilfskehlenschutzventil, Polsterdichtschutzventil, Freifallventil. Schaltschrank: Siemens Bedienfeld: GMT 7” (inländisch, 1 Jahr Garantie) Vorfüllventil: NG 160 (Taiwan-Modell) Geschwindigkeiten: Schnellhub abwärts: 175 mm/s (P-Q proportional einstellbar) Schnellhub aufwärts: 285 mm/s (P-Q proportional einstellbar) Pressgeschwindigkeit: 5 – 14,5 mm/s (P-Q proportional einstellbar) Abmessungen: Tisch 1200 x 1000 mm, Lichte Weite 1000 mm Wegmesssystem: Ja Lichtschranke: Ja Maschinengewicht: ca. 15.000 kg Öltank: 1300 x 900 x 600 mm, 700 L Fassungsvermögen

Kondisi: siap digunakan (bekas), C-frame Hydraulic Press, PYE Press 3t, Used Machine Manufacturer: VEB Wema Model: PYTE 3.15 Overall dimensions: 500 x 730 x 1170 mm Pressing force: 3.15 t Stroke: 280 mm Table size: 280 x 280 mm Cgjdpsw Hc H Hsfx Aa Top Electrical specifications: 380 V; 1.5 kW; 4 A

Kondisi: siap digunakan (bekas), dehydraulische Presse, Vierständerpresse, Eitel 100T Hersteller: EITEL Cgedpjuhl E Refx Aa Tjp Presskraft: 100 Tonnen Gesamtmaße: 1900x1100x3300 mm Tischgröße: 1050x800 mm Hub: 400 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 3.000 mm, panjang umpan sumbu Z: 180 mm, lebar total: 2.300 mm, panjang total: 4.120 mm, tinggi total: 2.650 mm, tinggi kerja: 180 mm, lebar kerja: 2.000 mm, kedalaman pelat tekanan: 120 mm, gaya penekanan: 2 t, berat keseluruhan: 2.000 kg, panjang langkah: 100 mm, masa garansi: 12 bulan, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis penyesuaian ketinggian: mekanis, daya: 3 kW (4,08 hp), Doppelte hydraulische Rahmenpresse – Industrielle Lösung für präzise und effiziente Montage Für anspruchsvolle Produktionsumgebungen konzipiert, bietet diese doppelte hydraulische Rahmenpresse höchste Anpassungsfähigkeit und strukturelle Integrität. Sie ist ideal für das Verpressen von Holzrahmen – von Fenstern und Türen bis hin zu maßgefertigten Möbelkomponenten unterschiedlichster Formen und Größen. Maximale Flexibilität für vielseitige Einsatzbereiche Dank ihrer intelligenten Konstruktion und verstellbaren Spannsysteme passt sich die Presse zügig an Rahmen mit verschiedenen Stärken und Geometrien an, ohne aufwendige Umrüstungen oder manuelle Eingriffe. Der Wechsel zwischen Werkstücken erfolgt schnell und unkompliziert, was die Produktionseffizienz erheblich steigert. Industrietauglicher Aufbau für schwere Beanspruchung Der Pressenrahmen besteht aus hochwertigem Baustahl und gewährleistet durch seine robuste Konstruktion erhöhte Verwindungssteifigkeit und Stabilität auch unter hoher Last. Die Seitenholme werden aus einem einzigen massiven Stück gefertigt, wodurch Schwachstellen durch Verschraubungen oder Schweißnähte entfallen. Gezielt eingesetzte Verstärkungen minimieren die Torsionsverformung beim Pressen und sichern die exakte Ausrichtung und Rechtwinkligkeit aller Rahmenkomponenten. Diese stabile Bauweise fördert nicht nur die Betriebssicherheit, sondern verlängert auch die Lebensdauer der Maschine selbst bei kontinuierlichem industriellen Einsatz. Effizientes hydraulisches Pressen mit präziser Kraftregelung Codpfewgybujx Aa Togp Das System verfügt über 10 hocheffiziente Hydraulikzylinder (6 vertikale, 4 horizontale), die über die gesamte Rahmenfläche gleichmäßigen und kontrollierten Pressdruck ausüben. Das garantiert eine konstante Pressung der Verbindungen und eine gleichmäßige Leimverteilung – Fugen oder Schwachstellen werden vermieden. Zusätzlich sorgen drei frontale Presssysteme für optimalen Kontakt zwischen Werkstück und Pressentisch und ermöglichen eine präzise Positionierung vor dem Spannen. Modulare Presskolben mit Schnellspannvorrichtung lassen sich einfach umpositionieren, um punktgenau Druck auf unterschiedlich große oder komplex geformte Rahmen auszuüben. Dies ist besonders vorteilhaft bei anspruchsvollen Geometrien oder sensiblen Bereichen. Einfache Bedienung durch vollautomatisches Hydrauliksystem Dank einer leistungsstarken Hydraulikpumpe arbeitet die Presse autark – externe Druckquellen sind nicht erforderlich. Alle Pressfunktionen und Druckeinstellungen werden über benutzerfreundliche elektrische Bedienelemente aktiviert, wodurch körperliche Belastung für den Bediener entfällt. Jeder Arbeitsbereich verfügt über ein separates Fußpedal für noch mehr Flexibilität am Arbeitsplatz. Die Hydraulikpumpe gewährleistet während des gesamten Presszyklus einen konstanten und gleichmäßigen Druck, was eine durchgehend hohe Qualität der Pressergebnisse sicherstellt. Ausgelegt für industrielle Hochleistungsproduktion Diese doppelte Rahmenpresse überzeugt durch: - hohe Verarbeitungskapazität, - Anpassungsfähigkeit an verschiedene Rahmen- und Materialtypen, - effizienten und zuverlässigen Betrieb. Sie ist die ideale Lösung für Unternehmen in der industriellen Serienfertigung und verschafft Ihrem Betrieb einen echten Wettbewerbsvorteil in punkto Geschwindigkeit und Präzision bei Montagearbeiten. Technischer Support verfügbar in Englisch – Rumänisch – Deutsch.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, The P50MR motor-driven hydraulic press ensures high performance and maximum operational precision, thanks to its robust structure entirely laser-cut with no welds at the most stressed points. Codpefvhqgefx Aa Tsgp It is equipped with a submerged motor control unit (400 V, 50-60 Hz), a fast approach and return pump preset to 20 bar, and a pressure pump with adjustable handwheel to achieve the desired force. The machine also features a maximum pressure valve with mechanical lock to prevent overpressure, and the standard pressure gauge allows extremely accurate calibration of the delivered force. Technical Data: Pressing force: 50 tons Clearance between uprights: 800 mm Approach speed: 1,800 mm/min Working speed: 350 mm/min Fast flow rate: 26 l/min Slow flow rate: 5 l/min Cylinder stroke: 300 mm Cylinder bore: 135 mm Rod diameter: 70 mm Shank diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Frequency: 50-60 Hz Motor power: 3 kW Maximum absorbed current: 5.5 A Weight: 500 kg Dimensions: 1550 x 800 x 1965 (h) mm

Kondisi: bekas, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, and secondary raw materials Serial No. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Press plate stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber base area: 1500 x 1100 mm Press chamber height: 1650 mm Filling opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale size: 1500 x 1100 mm Bale height: max. 1100 mm Hydraulic operating pressure: 200 bar Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz, 12 Amp. - Equipped with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Press operation possible only when press chamber door is closed - Two-hand control for hydraulic ejection of finished bale - Clearances for manual strapping - Produces standard industrial bales of 1500 x 1100 x 1100 mm - The highly compacted bale is automatically tilted onto a pallet - Only 62 operating hours Installation dimensions (L x W x H): 2120 x 1350 x 3220 mm Transport height with retracted hydraulic cylinders: approx. 260 cm Weight: 1.8 tons The machine is in excellent, as-new condition. The new price for this press from BEMA is EUR 22,200 net. Cjdpovq Rtkjfx Aa Togp BEMA also purchases packaging waste that you bale with this press.