Beli Holz Her Evolution 7405 bekas (161)

Tahun pembuatan: 1989, Kondisi: baik (bekas), - tilting spindle - shaft diameter 50 mm - height adjustment - pneumatic spindle position adjustment - power supply 400V - feed mechanism is not included in the offer Kwodpfjgxpiljx Ag Rjw

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: Ksdpfx Aswka H Seg Reww - Equipped with a new glue application system - Infeed fence, manually adjustable - Milling unit 1961 - Edge feed unit 1903 - Glue application station 1906 with sensing nozzle - Pressing unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper station 1929 - Chip collection box - Area scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge material thickness depending on configuration: 0.4–5 mm - Edge height max.: 55 mm - Edge strip length: min. 350 mm - Edge overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper station: 280 m³/h - Static negative pressure: - Jointing milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Minimum air velocity: 20 m/sec - Jointing milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: Machine has undergone complete overhaul: - New Glue Jet 301 adhesive system (upper part 1 mm) - All units checked - All cutters sharpened - All knives replaced Feed speed: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Electrical system for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control with 15" touchscreen ECO MODE energy saving function 1350 mm infeed ruler, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for edge jointing - Cutter, diamond-tipped Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond-tipped Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeder 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Hopper for granulate Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond-tipped Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond-tipped Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond-tipped Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond-tipped Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible knives for scraper head R = 2.5 mm (2 pcs. required) Flat scraper 1964 Kedpfewka Iiex Ag Rsww Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min Kedpfxewka Upe Ag Rsww - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 561, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 95 mm, lebar pemotongan (maks.): 3.100 mm, panjang pemotongan (maks.): 3.100 mm, kecepatan pemakanan sumbu X: 100 m/menit, penggerak gergaji: 11 W, masa garansi: 12 bulan, Perlengkapan: doser, 1 Ksdpfxjx Nqrve Ag Rsww

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 2128, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 65 mm, ketebalan tepi (maks.): 15 mm, kecepatan pemakanan sumbu X: 18 m/menit, masa garansi: 12 bulan, HOLZ-HER_Kantenanleimmaschine_SPRINT_1329_multi_Baujahr_2025_Lie ferung_ab_Werk Kedjx Nqn Rspfx Ag Rjww

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 228, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.045 mm, jarak lintasan sumbu Y: 2.490 mm, jarak gerak sumbu Z: 317 mm, panjang benda kerja (maks.): 3.100 mm, lebar benda kerja (maks.): 2.200 mm, tinggi benda kerja (maks.): 120 mm, kecepatan pemakanan sumbu X: 70 m/menit, laju pemakanan gandar Y: 70 m/menit, laju pemakanan sumbu Z: 20 m/menit, HOLZ-HER CNC nesting machine Dynestic 7507 push, year of manufacture 2025, brand new, delivery ex works Campus V8 CAD/CAM software with process simulation Campus V8 Plus CAD/CAM software with material removal simulation Better Sim Campus V8 Better Nest freeform software Handheld remote control device 2D barcode scanner Operator console with 21.5" touch screen Uninterruptible power supply (UPS) Ultrasonic measurement on the controlled gantry Milling unit 7830, power 10.3 kW Drilling unit 7884 with 14 spindles Vertical adapter with double pressing force Integrated saw unit in X-direction Additional processing field at the rear with 1 stop 8-position linear pick-up tool changer Vacuum pumps 140+140+500 m³/h ECO-VAC intelligent vacuum system 16-circuit vacuum system, software-controlled Hi-Speed USB-Device network server Kwedpfxex Nqdls Ag Rjw Automatic central lubrication Nesting cutter tool set in tool case Tool set for drilling head Delivery table with controlled and motorized conveyor belt Additional extraction over outfeed conveyor belt TouchLabel PRO touchscreen and label printer mounted on stand Extraction funnel at the end of the outfeed conveyor belt Warranty period 12 months Delivery time: immediate

Kondisi: bekas, Tahun pembuatan: 2014, • motorisierte Druckbrückenverstellung Kwjdpfx Ajx Huhcog Row • Elektrische Vorschubregelung, stufenlos, 400 V / 50 Hz, 2,2 kW • Steuerung PPC 221 – mit 8,4'' VGA Farbdisplay Hochleistungssteuerung mit sehr einfacher Bedienung • Kanten-Vorfräsaggregat 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 U/min) mit 2 Fräseinheiten für das Vorfräsen der Plattenkante • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Linkslauf Für Vorfräsaggregat 1801 / 1802 • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Rechtslauf Für Vorfräsaggregat 1801 / 1802 • Kantenmagazin 1903 SYNCHRO Automatischer Transport von Rollen- und Streifenmaterial • Leimstation Glu Jet GJ301, automatisch (2,3 kW, 50 Hz) • Andruckstation 1913, pneumatisch erste Walze angetrieben, 2 zusätzliche Andruckrollen mit pneumatischer Einzelsteuerung • Kappstation 1918 (60 mm), pneumatisch (2 x 0,45 kW, 12.000 U/min), pneumatisch schwenkbar 0/10° • Multifunktionsfräsaggregat 1827, pneumatisch (2 x 0,65 kW, 200 Hz, 12.000 U/min) • Vertikale Abtastrollen, manuell Manuelle Einstellung der vertikalen Abtastrolle in 0,1 mm Schritten zum Überfräsen von Decküberständen, z.B. bei Kunststoffkanten • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Linkslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Rechtslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Eckenkopieraggregat 1832 (1 x 0,35 kW, 200 Hz, 12.000 U/min), für Kantenstärken bis 3 mm • Fräser, Diamant Ø 53 x 10 x 16 mm, Z = 3, R = 2 mm, mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, für Profilaggregat 1832 • Ziehklingeneinheit 1929, pneumatisch einschließlich pneumatischer Verstellung (separat für oben und unten) • HW-Wendemesser für Ziehklingenhalter 1929 / 1927 R = 2,0 mm (2 Stück erforderlich) • Flachziehklingeneinheit 1964 Entfernen von Leimresten für saubere Leimfugen. • Poliereinheit 1940 (2 x 0,12 kW, 50 Hz, 1400 U/min) Zur Endreinigung und Kantenpolitur. Mit 2 Textilscheiben, Schwenkbereich 0–5°.

Kondisi: bekas, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for unit adjustment Pre-milling unit for pre-milling before gluing station Kedpfx Agjxu E Nwe Rsww Fully automatic edge magazine for roll and strip material GLU-JET cartridge adhesive application station + PU bonding Adhesive application by nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic switchover from 0-10° inclination for end saws Pneumatic milling unit, flush trimming up to 6 mm, radius milling - chamfer milling - 15°, programmable via control panel Scraper unit for chamfers and radii with 2 scraper holders Pneumatic infeed and outfeed Flat scraper unit - finish Spray device - PU Machine is FACTORY-REFURBISHED and in TOP CONDITION

Kondisi: bekas, Tahun pembuatan: 2001, 1 Kjdpfx Aew I Ug Hjg Roww

Kondisi: bekas, Tahun pembuatan: 2001, tinggi total: 1.750 mm, panjang total: 5.650 mm, lebar total: 1.100 mm, machine-ad-001 Kwsdpfx Ajxlqpdog Rew

Kondisi: bekas, Tahun pembuatan: 2007, Mesin bekas Tahun pembuatan: 2007 Perlengkapan dan data teknis: Sistem nesting dengan meja raster Ukuran pengerjaan: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Lintasan gerak: - X: 5665 mm - Y: 1650 mm - Z: 325 mm dengan unit milling 7933: - Motor 11 kW (S6) - HSK 63 - pendingin air dengan sumbu C dengan penukar alat tipe piringan 18 posisi Kjdpfx Agjwka Ipe Rjww dengan pompa vakum 250 m³ dengan unit pengoperasian manual dengan pelumasan sentral dengan sistem pelumasan minimum Ketersediaan: segera Lokasi: Röllbach

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Edge bander HOLZHER, tipe 1310 dilengkapi dengan: stasiun lem patron, pemotong sirip rata, dua agregat multifreze, scraper profil, unit buffing, kondisi baik. Kedpfxsx H Sutj Ag Reww

Kondisi: bekas, Tahun pembuatan: 2005, Mesin bekas Tahun pembuatan: 2005 Perlengkapan dan data teknis: Jalur gerak: - Sumbu X: 2.685 mm - Sumbu Y: 1.095 mm - Sumbu Z: 140 mm Agregat milling: - 6 kW, pendingin air - Dudukan alat HSK 63 F - Kecepatan putar 1.000 - 18.000 rpm Penukar alat: 6 posisi, samping Kepala bor: - 9 spindle bor vertikal dengan pitch 32 mm - Spindle bor horisontal: 1+1 - Spindle bor vertikal: 1+1 Gergaji alur arah X Kontrol: Twin CAM 32 Pompa vakum 100 m³/jam Kwodpewka H Eofx Ag Rsw Termasuk suction cup vakum Ukuran: 5200 x 2843 x 1855 mm Berat: sekitar 3.500 kg Ketersediaan: sesuai kesepakatan Lokasi penyimpanan: Röllbach

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, de Kwedorz Irrjpfx Ag Rsw

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Ketebalan tepi 0,4 – 3 mm Kontrol layar SPS Majalah tepi otomatis penuh Majalah rol otomatis penuh – gunting potong Stasiun lem cartridge + PU + nosel aplikasi otomatis Tinggi benda kerja 6 – 45 mm Unit pemotong dapat diputar 0 dan 10 derajat Kodpow Igg Sefx Ag Roww Milling rata, chamfer, dan radius, dapat diputar hingga 15 derajat Pisau pengikis profil Unit pemoles Kabinet peredam suara Versi CE Mesin telah DIUJI FUNGSI dan dalam KONDISI BAIK dari lokasi

Kondisi: bekas, Tahun pembuatan: 2012, Used machine Year of manufacture: 2012 Base machine – Dynestic 7521 20.6 Dynestic table For classic nesting processing with wear plate Machining length: 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head and consoles Gantry design Helical rack and pinion drive in X and Y direction, ball screw in Z direction for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 – 20.6 Please refer to the relevant data sheets. Processing dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. traversing path: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from top edge of table (without tool, without holder) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and inspection window Voltage: 400 V, 50/60 Hz CONTROL SYSTEM: Dual-core processor Operating system: Windows XP 80 GB hard disk / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for transferring control and program data. Data transmission takes place via high-speed internet connection Requirement: High-speed internet at the machine. DYNESTIC table Solid, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for clamping the wear plate 1 working area with stop rails / stops Height 30 mm, pneumatically lowerable 2 stop rails each in Y direction and 1 stop in X direction on the right (viewed from the front of the machine) Vacuum fields Single-circuit vacuum system Drilling unit 7976, 24 spindles Drive power 3.0 kW 18 individually selectable vertical spindles L-shaped arrangement, 10 in X and 8 in Y direction 32 mm pitch Max. drill bit diameter: 35 mm Total drill bit length: 70 mm from mounting end (depending on panel thickness) Spindle extension stroke: 70 mm Rotational direction: alternates between right and left Speed (n max) 1000 - 5710 rpm, stepless adjustment Mount: M10 thread – 11 mm fitting without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 double drilling spindle in Y direction Mount: M10 thread, 11 mm fitting Total drill bit length max. 70 mm from mounting end without tool, without holder Empty position 1 for: Optional double drilling spindle in X direction or Vertical adapter with double feed force Kjdpsw I U Ecefx Ag Rsww Empty position 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) Max speed: 1000 – 24000 rpm, steplessly adjustable, two-stage feed stroke Max. output at 12000 rpm up to 24000 rpm air-cooled with HSK-F 63 tool holder with right-han

Kondisi: bekas, Panel saw Produsen: Holz-Her Model: 1265 Tahun: 1989 Spesifikasi teknis Dimensi kerja Dimensi pemotongan (mm) Kwsdpfxew I A Dye Ag Rew Panjang x Tinggi 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Tinggi potong pinggir = tinggi potong maks - 65 mm Kedalaman potong (mm): 45 (50) Kedalaman potong tergantung pada benda kerja Dimensi dalam tanda kurung tanpa Super Cut Unit gergaji Daya motor: 3 kW, 400 V, 50 Hz Diameter mata gergaji (mm): 220 Kecepatan mata gergaji (min) pada 50 Hz: 5450 Ekstraksi Konsumsi udara (m³/jam): 2000 Kecepatan udara (m/s): 20 Koneksi (mm): 160 Dimensi mesin Luas lantai Panjang (mm): 4315 / 5315 / 6315 Kedalaman (mm): 1420 Tinggi (mm): 2500 / 2640 / 2775 Berat (kg): sekitar 760 (5300 x 2200mm) Berat kotor (kg): sekitar 990 (5300 x 2200 mm)

Kondisi: sangat baik (bekas), Mesin frais horizontal Diameter spindel: 40 mm Kjdpjw N Ryrsfx Ag Reww Panjang spindel: 220 mm Diameter spindel maksimum: 250 mm

Kondisi: bekas, translation Kwodpfx Asw Nad Heg Rjw

Kondisi: baru, Tahun pembuatan: 2025, maschinensucher-volltext-2025 Kodpfxow Tfxwo Ag Rjww

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Kodpfjvymdqox Ag Reww Equipment and technical data: Edge feed for coil and strip material Jointing milling unit with 2 milling heads Cartridge glue application system 3-roller pressure unit End trimming saw unit Radius milling unit Radius scraper unit Corner rounding unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edgebanding thickness: 0.4-15 mm Maximum edgebanding height: 55 mm Minimum strip edgebanding length: 350 mm Maximum edge overhang per side: 3 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6,480 x 1,250 x 1,690 mm Availability: short notice Location: Flörsheim

Kondisi: baru, Tahun pembuatan: 2024, NEW MACHINE ENQUIRIES: Please understand that we only offer this new machine within our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Enquiries from outside these regions will not be answered. ----- New machine Year of manufacture: 2024 Features and technical data: - Base machine 1057 XL C with Beckhoff touch-screen control - Extendable workpiece support, 600 mm - Extension for extendable support arm - Standard infeed fence - 3 LED lights in the infeed area - Jointing unit with 2 motors - DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Kwjdpfx Agsw I U Rfe Rew - Edge feeding unit 1903, fully automatic - Glujet 301 adhesive application system - Automatic reloading function - Magazine for 1.4 kg cartridges (4 cartridges capacity) - GluJet collection container - Pressure unit 1912-3, pneumatic - GM 201 spraying device after pressure unit - 1918 cross-cut unit, pneumatic - Extraction hoods for cross-cut unit - FR201 combination milling unit with DIA cutters R=2 mm - 1832 contour milling unit - Shelf program - ZK 301 radius scraper blade - Chip collection box - FK 701 flat scraper blade - TR201 spraying devices, front and rear - 1940 buffing unit Availability: short notice Location: Flörsheim

Kondisi: baru, Tahun pembuatan: 2025, Display model Year of manufacture: 2025 Equipment and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest free-form nesting software - Uninterruptible power supply (UPS) (ZB27) - Touchtool tool length measurement - 10.3 kW milling spindle - Drilling unit with 14 spindles - 1 additional machining area (Field A) at the rear with 1 pneumatically retractable stop, height 70 mm - 2 electronically monitored side stops at the front in Field A + D in the X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, single-position aggregate magazine, swiveling in X- and Y-direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) – software controlled, incl. additional 25 meters of sealing cord Kwsdpfoxc Rmkox Ag Rsw - Red laser pointer (one laser pointer) Field D (ZB8) for positioning the vacuum cups or scanning the workpiece contour - Automatic central lubrication - Vacuum cups for smooth table surfaces, complete 140x115 mm, height 30 mm with connection hose - Thin panel pusher as a supplement to the ejection pusher, for special materials under 4 mm material thickness and standard wood-based panels under 2 mm - Conveyor belt, complete pusher conveyor belt, push-off table - TouchLabel PRO – touchscreen and label printer mounted on tripod - Production control computer NEXTEC 4.0 - Extraction hopper at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Tahun pembuatan: 2025, Kondisi: baru, Mesin pameran Tahun pembuatan: 2025 Lokasi: Flörsheim Ketersediaan: sesuai kesepakatan Kwedpfexavtwjx Ag Rew