Beli Holz Her Sprint 1417 bekas (151)

Kondisi: bekas, Tahun pembuatan: 2001, panjang total: 5.650 mm, tinggi total: 1.750 mm, lebar total: 1.100 mm, machine-ad-001 Kdjdpjxlqpdjfx Aayew

Kondisi: baik (bekas), Tahun pembuatan: 2000, I am selling an edge banding machine Holz-Her Sprint 1417, year of manufacture 2000: - Jointing/Cutting Unit - Edge banding with cartridge glue - End trimming saws - Heavy-duty top/bottom trimming unit - Tiltable radius trimming unit - Radius scraper Kjdpod Nukqjfx Aayjdw - Corner rounding unit with one motor - Flat scraper - Polishing brushes Newly sharpened tools, new display, fully operational. CE marked. Good condition. Complete documentation included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 558/0-112, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feed 1901 Tracing nozzle Pressure unit 1913 MOT End trimming unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for contour milling Scraper 1929 Profile milling unit 1983 Flat scraper 1964 Buffing unit 1944 Length approx. 5900 mm Connected load 21.4 A Kdjdpfx Aoh Uyg Eeayjw

Kondisi: sangat baik (bekas), jam operasional: 93 h, Catalog number 7814 Only 93 hours in operation, 5667 meters processed TECHNICAL DATA Equipment: - Disc unit - Pre-milling unit - Tape feeder Kodpfjxxla Rex Aaysdw - Glue tank (cartridges) - Guillotine – pre-cutting of edging - 3 pressure rollers - 2 end trimming units with saw blades - 2 milling units for edge profiling (radiused cutters) - Corner rounding unit - Scraper units – for excess glue removal - Buffing/polishing units - Workpiece thickness: 6-45mm - Minimum length of workpiece: 180mm - Minimum width of workpiece: 60mm - Edgeband thickness (from roll): 0.4-3mm - Air requirement: 6-8 bar - Extraction port diameter: 1x60mm, 4x80mm, 1x120mm - Dimensions (LxWxH): 5900x950x1850mm - Weight: 1720kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – Unpainted – Very good condition, only 93 hours usage, 5667 meters processed – Used edgebander Net price: 56,900 PLN Net price: 13,550 EUR depending on the rate 4.2 EUR (Prices may change with significant fluctuations)

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Features and technical data: The machine has been completely overhauled: - New Glue Jet 301 adhesive application system (top part 1 mm) - All units inspected - All milling cutters sharpened - All knives replaced Electrics for stepless feed speed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control unit with 15" touchscreen ECO MODE energy-saving mode Infeed fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm, with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feed 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Hopper for granulate Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) Surface scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Kdodpfx Aaewka Iisyjw Location: 63934 Röllbach

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Ketebalan tepi 0,4 – 3 mm Kontrol layar SPS Majalah tepi otomatis penuh Majalah rol otomatis penuh – gunting potong Stasiun lem cartridge + PU + nosel aplikasi otomatis Tinggi benda kerja 6 – 45 mm Unit pemotong dapat diputar 0 dan 10 derajat Milling rata, chamfer, dan radius, dapat diputar hingga 15 derajat Pisau pengikis profil Unit pemoles Kabinet peredam suara Ksdpsw Igg Sofx Aayjdw Versi CE Mesin telah DIUJI FUNGSI dan dalam KONDISI BAIK dari lokasi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, HOLZ-HER Sprint 1329 - Mesin edge banding bekas dalam kondisi baik. - Tahun pembuatan: 2015 - Termasuk konveyor balik BARBARIC (tahun 2017) Kdjdpfx Aajxducrjyow - Tersedia mulai akhir November/awal Desember 2025 Silakan hubungi kami jika ada pertanyaan.

Kondisi: bekas, Tahun pembuatan: 1999, Holz-Her SPRINT 1411 Kantenanleimmaschine Beschreibung Werkstückdicke min./max.: 6/45 mm Automatischer Kantenmagazin (Kantenband bis 5 mm) Werkstückbreite min.: 60 mm Werkstücklänge min.: 180 mm Patronenleimsystem (kurze Aufheizzeit 2-3 min) Kdedpew Ebrxsfx Aaysw Kappaggregat Bündigfräsaggregat Ziehklingenaggregat (flach) Poliereinheit (Bürsteinheit) CE (Trotz größter Sorgfalt sind alle Änderungen und Irrtümer in den technischen Daten, Preisen und Angaben vorbehalten! Keine Gewährleistung auf gedruckte Daten. Verfügbarkeit vorbehaltlich Zwischenverkauf.)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, HOLZ-HER SPRINT 1329 okleiniarka Główne zalety i cechy: ● Konstrukcja: Solidna budowa, stabilna forma oraz doskonałe tłumienie drgań. ● Panel sterowania: Intuicyjny pulpit z monitorem dotykowym 15 cali, umożliwiający łatwe wprowadzanie, zapisywanie i wyświetlanie danych obróbczych oraz sterowanie maszyną. ● Automatyzacja: Automatyczny zapis informacji o używanych programach, liczbie obrabianych sztuk oraz czasie pracy maszyny. ● Cicha praca i bezpieczeństwo: Osłony dźwiękochłonne redukują hałas oraz zwiększają bezpieczeństwo stanowiska pracy. ● Programowanie: Programowane sterowanie HOLZ-HER zapewnia pełną funkcjonalność okleiniarki przy możliwości uruchamiania kompletnych programów obróbczych. ● Regulacja mechaniczna: Zmotoryzowana regulacja wysokości obrabianych elementów. ● Transport: Rolki podające na wejściu i wyjściu maszyny. Łańcuch transportowy maszyny ze zautomatyzowanym smarowaniem. Szczegółowa specyfikacja i wyposażenie (zespoły robocze): 1. Zespół frezujący wstępny 1802 (2 x 2 kW, 12000 obr/min): ○ Jednostka synchroniczna i przeciwbieżna z dwoma diamentowymi frezami K/F 70-64 30. ○ Zmotoryzowana regulacja grubości frezowania (maks. 3 mm). 2. Zespół podawania obrzeża 1901 Synchro: ○ Pozwala na precyzyjną regulację naddatku obrzeża, co znacznie wpływa na oszczędność materiału. ○ Podawanie obrzeża z jednej płyty o średnicy 820 mm. Szerokość załadunku obrzeży w postaci taśmy: 40 mm. 3. System klejenia Glue Jet 2.3 (opatentowany system): ○ Brak wałka klejowego – klej nanoszony jest za pomocą dyszy. ○ Przeznaczony do stosowania klejów EVA (granulat, wkłady) oraz PUR. ○ Pełna regulacja rozpoczęcia i zakończenia nanoszenia kleju, a także wysokości nanoszenia w zależności od grubości obrabianego elementu. ○ Technologia hybrydowa, czas nagrzewania 3-4 minuty. 4. Strefa docisku 1913 MOT (zmotoryzowana regulacja): ○ Trzy rolki dociskowe, z czego pierwsza napędzana i wykonana w technologii SYNCHRO. ○ Pozostałe dwie rolki ustawione skośnie dla lepszego docisku obrzeża. 5. Zespół obcinający 1928 (2 x 0,45 kW, 12000 obr/min): ○ Pneumatyczna regulacja. ○ Precyzyjne obcinanie obrzeży o grubości do 60 mm tarczami HM. ○ Zakres regulacji obu jednostek 0-10°. Dwie tarcze tnące Ø110. 6. Zespół frezujący uniwersalny 1826 MOT4 (2 x 0,65 kW, 12000 obr/min): ○ Zmotoryzowana regulacja. ○ Przeznaczony do profilowania obrzeży w zakresie 15° do 90° lub prosto. ○ Narzędzia diamentowe z technologią AIR STREAM. Kedpfswn Nuasx Aayjdw ○ Promień narzędzia R=2 mm. 7. Zespół zaokrąglający rogi 1833 MOT4 (2 x 0,65 kW, 12000 obr/min): ○ Zmotoryzowana regulacja. ○ Zaokrąglanie kątów w locie narzędziami HM do maks. R=3 mm. ○ Możliwość powtarzania promieniowania na obrzeżach. ○ Diamentowe narzędzia. ○ Promień narzędzia R=2 mm. ○ Grubość elementów obrabianych 10-60 mm. 8. Zespół cyklinujący 1929 MOT4 (cyklina profilowa): ○ Zmotoryzowana regulacja. ○ Do cyklinowania PVC oraz ABS. ○ Maksymalny promień do R=3 mm. ○ Dwie wymienne noże, dysze wydmuchowe oraz odciąg wiórów. 9. Zespół polerujący 1964 (2 x 0,12 kW, 1400 obr/min): ○ Dwie jednostki czyszczące z obrotowymi tarczami filcowymi. ○ Obie jednostki regulowane w zakresie 0-5° dla podniesienia efektu czyszczenia. 10. Netsystem 1856: ○ Zespół 4 dysz natryskowych (dwie z przodu i dwie z tyłu maszyny). ○ Płyn o właściwościach antyadhezyjnych i czyszczących. ○ Zapewnia niewidoczne łączenie i wysokojakościowe wykończenie.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 315/0-110, Control panel at top Edge feed 1902 Glue application station 1906 Cut-off shear 1902 Pressure unit 1816 Cutting unit 1918 Milling unit 1942M Rounding scraper 1929 Profile milling unit 1983 Flat scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Kodsh Ux Suopfx Aayedw Length approx. 5300 mm

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm Kdjdpfewka Nyjx Aaysw - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Kjdpfxev Sv Ene Aaysdw Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Completely overhauled With new adhesive application system Features: - Manually adjustable infeed fence - Milling unit 1961 - Edge feed 1903 - Gluing station 1906 with sensing nozzle - Pressure station 1816 pneumatic Kdjdpfjwka H Sjx Aayjw - End trimming unit 1822 - Milling unit 1942 M radius, chamfer, flush trimming - Complete air nozzle - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Complete extraction hood set -- Complete safety guards Technical Data: Overall length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edging thickness depending on configuration: 0.4-5 mm Max. edging height: 55 mm Min. strip edging length: 350 mm Edging overhang/height per side: max. 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min Extraction: Jointing milling unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Jointing milling unit: 1490 Pa Milling unit: 1650 Pa Min. air velocity: 20 m/sec Jointing milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: approx. 2-3 weeks after order confirmation Location: Hochheim

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for coil and strip material Jointing milling unit with 2 milling heads Cartridge glue application system 3-roller pressure unit End trimming saw unit Radius milling unit Radius scraper unit Corner rounding unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edgebanding thickness: 0.4-15 mm Maximum edgebanding height: 55 mm Minimum strip edgebanding length: 350 mm Maximum edge overhang per side: 3 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Kodevymdqspfx Aayodw Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6,480 x 1,250 x 1,690 mm Availability: short notice Location: Flörsheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 18 m/menit, ketebalan tepi (maks.): 8 mm, tinggi produk (maks.): 45 mm, panjang produk (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color display (16:9) Control Panel: Swiveling Program Memory: Available Pressure Bridge Adjustment: Motorized Feed: Via transport chain Feed Speed: 8 - 18 m/min Workpiece Support: Extendable Infeed Fence: Motorized adjustment Edge Thickness (Coiled Material): 3 mm Edge Thickness (Strip Material): 8 mm Max. Edge Thickness for Corner Rounding: 3 mm Workpiece Thickness: 45 mm Workpiece Thickness for Corner Rounding: 45 mm Minimum Workpiece Length: 180 mm Distance Workpiece Support: 470 mm Edge Material Support Plate Ø: 800 mm Milling and Processing Units Jointing Unit: 1961 Cutter Type: Diamond jointing cutter, climb and counter rotation Workpiece Height Adjustment: Automatic Edge Feed & Glue Application Kdedpfjvzyblox Aayjw Edge Feed: 1903 Pre-Cutting: Up to 3 x 45 mm (material dependent) Glue Application System: 1905 Multi-System Glue Height Adjustment: Automatic with sensor nozzle Pressure Regulator: For cartridge pressure adjustment PUR Glue Usage: Possible Pressure Section & End Trimming Unit Pressure Section: 1913 MOT Drive: 1st roller driven End Trimming Unit: 1918 with pneumatic adjustment End Saw: Pneumatically swiveling Milling & Edge Processing Multifunctional Unit: 1824 MOT 4 Cutter: Multifunctional cutter for 1, 2, 3 mm radii Corner Rounding Unit: 1832 Corner Rounding Capability: Up to 3 mm edge thickness Radius Scraper Blade: 1929 MOT 2 Sensor Roller Adjustment: Motorized (horizontal) Pneumatic Adjustment: Separate for top and bottom Cleaning & Polishing Chip Collection Box: For radius scraper blade Flat Scraper Blade: 1964 (for removal of glue residue, for a clean glue joint) Extraction Hoods: Available Spraying Device: 1856 for infeed and outfeed zones Buffing Unit: 1940 (for final cleaning and edge polishing) Performance Data & Extraction End Trimming Knife for Coiled Material up to: 3 mm Heating Time: 3.5 min Jointing Cutter Power: 2 x 2 kW End Saw Power: 2 x 0.22 kW Milling Unit Power: 2 x 0.35 kW Corner Rounding Power: 0.22 kW Extraction Port Jointing Unit: 120 mm Extraction Port Milling Unit: 70 mm Extraction Port Scraper Unit: 70 mm MACHINE DETAILS Total Length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter (climb and counter rotation) - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (material dependent) - Glue application system with automatic glue height adjustment and sensor nozzle - Pressure regulator for cartridge pressing pressure - PUR glue applicable - Pressure section with driven first roller - End trimming unit with pneumatic adjustment - Pneumatically swiveling end saw - Multifunctional unit for 1, 2, 3 mm radii - Corner rounding unit up to 3 mm edge thickness - Radius scraper blade with motorized sensor roller adjustment - Chip collection box for radius scraper blade - Flat scraper blade for clean glue joint - Extraction hoods - Spraying device for infeed and outfeed - Buffing unit for final cleaning and edge polishing

Kondisi: bekas, Tahun pembuatan: 1994, Ketebalan pinggiran 0,3 - 20 mm Tinggi edging: maks. 66 mm Panjang edging: min. 200 mm Lebar benda kerja min. 60 mm Panjang benda kerja min. 140 mm Tebal benda kerja: min. 6 mm, maks. 60 mm Kecepatan makan 8 atau 16 m/menit - Pengeleman pinggiran dengan Ultra - Granupress - Pemotongan ujung dengan 2 gergaji, dapat diputar 0 - 15° - Milling, radius / rata - Penyalinan sudut - Scraper - Penggosokan pneumatik Lokasi: Nattheim Kdjdpsvvkdtsfx Aaysw

Kondisi: bekas, Tahun pembuatan: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Motor: 4 kW – 4420 rpm Includes intermediate workpiece support on 4 fields Includes 2 longitudinal stops with manual scale Availability: short-term Ksdpovymf Uofx Aayjdw Location: Röllbach

Kondisi: sangat baik (bekas), Holz-Her alat penghantar dengan 3 rol dan dudukan (rol BARU), 8 kecepatan, kondisi sangat baik. Kdjdpfx Aaowktaloyew

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment Kdodpjvvkfdsfx Aayjw with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard Kodpswka Upsfx Aayjdw - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: bekas, Lokasi gudang: Nattheim Kedovvkrdopfx Aayjdw

Kondisi: bekas, Tahun pembuatan: 2011, Berat: sekitar 4500 kg Kodpjvvi R Ejfx Aayodw Lokasi penyimpanan: Nattheim

Kondisi: bekas, Tahun pembuatan: 2006, Pelapisan EVA dengan 2 rol tekan, stasiun pemotongan, pra-frezer dan frezer pengebulatan, pisau tarik permukaan, perangkat penggerak. Lokasi penyimpanan: Nattheim Kdsdpfx Ajvvkg Ijayjw

Kondisi: bekas, Tahun pembuatan: 2009, automatic central lubrication Milling unit 7833, two-stage, 11 kW Speed range: 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated saw unit for sawing/grooving in X-direction, traversing with the workpiece Tool changer 7892: 16-fold linear pick-up changer, fixed installation on the right side of the machine Laser pointer, consisting of 2 pointers for positioning the vacuum cups and for tracing the workpiece contour Automatic console and cup positioning system: 6 consoles, each with 3 vacuum cup mounts, including 1 vacuum cup 80x80 mm per mount, and 4 loading aids Additional machining fields at the front for 6 consoles Base unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera on machining head Vacuum pump: 140 m³/h Vario Tool Change aggregate package, comprising: - Vector axis 7899 (C-axis), fully interpolating, 0-360° continuous rotation - Pneumatic tool changer 7890, 1-position pick-up system, fix-mounted to the left of the machine frame - Tool changer 7894, 6-position pick-up magazine, specifically for Vario Tool Change tool holders, fixed installation within the left machine frame, loadable with Vario Grip KSJ F 40 collet holders - 3 pieces Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets) - 1 piece saw blade holder - 3 collets as selected by the customer - 1 HW circular saw blade, max. diameter 220 mm Kjdpfovvi Spsx Aayedw Location: Nattheim