Mesin pengikat tepi

HOLZ-HER 1417

Kondisi: bekas, Tahun pembuatan: 2001, tinggi total: 1.750 mm, panjang total: 5.650 mm, lebar total: 1.100 mm, machine-ad-001 Duedpfxexlqpdj Ahuer

Kondisi: baru, Tahun pembuatan: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically adjustable height and tilt (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length: 3,000 mm - Manual parallel fence adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) with 4,000 rpm - AKE tool clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed adjustment from 2,000–6,000 rpm - Precise speed adaptation to the material increases both cutting quality and saw blade life Extended cutting height for single-sided tilt This option is designed for single-sided tilt with a large extraction hood for a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, the maximum saw blade diameter is 500 mm and cutting height is 179 mm. Available only with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit, single-sided tilt - With electric height and lateral adjustment, scoring blade height programmable with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting possible only on machines prepared for a scoring unit. Dujdpfx Ahjw I Uxcouer LED lighting - Particularly energy-efficient LED technology clearly marks the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precision running. It is infinitely lockable in any position. The large double rollers, precisely manufactured from hardened steel, keep the upper carriage absolutely aligned with the lower carriage via the hard-chromed guide bars. This running quality is maintained even after decades of use and contamination. The carriage design is an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, precisely fitted into the upper carriage, serves as a mount for the cross slide and as a connection point for various accessories. The entire unit is low-maintenance and requires no lubrication. On/off switch on the double roller carriage - The on/off switch on the double roller carriage is always within easy reach. The four buttons control the main saw blade and the scorer. This saves steps and increases safety. Mitre fence, crosscutting up to 3,500 mm - This patented ALTENDORF fence with integrated length compensation enables precise cutting of angles and mitres in one operation. In both positions, the swivel angle is infinitely adjustable by up to 49° and shown on a measuring scale. The play-free and robust flip stops can be easily moved and set as single stops over the complete range up to max. 3,500 mm.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kanter HOLHER SPRINT 1417 ini memiliki operasi berikut: -praj-gilingan (pre-milling) -pemotongan -pemotongan secara presisi Dusdpfx Ajyg Er Rehujr -mata router radius -cyclone radius -radial copy shaping -pembersih cyclonic lurus -pemoles

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000,

Kondisi: bekas, Τα κύρια εξαρτήματα και χαρακτηριστικά της γραμμής είναι τα εξής: - Επανατύλιξη Perini, έτος 1993 - 2 σταθμοί εκτύλιξης τύπου 4810 - Καλαντάρα μικροανάγλυφου μοντέλο 470 C - Αποκαλαντάρα 4901, έτος 1993 - Επανατύλιξη 6881 - Κλείστρα άκρων (tail sealer) 560C - Μηχάνημα κατασκευής ρολών (core making machine) 211 - 2 σταθμοί εκτύλιξης ρολών 4202/4203 - Φορτωτής ρολών (coreloader) 622 - Συσσωρευτής κορμών (log accumulator) 511 - 2 πριόνια κορμών (log saws) 140 - Φορτωτής κορμών (log loader) 619 - 2 Trimmex 5101 Dedpfx Ahewkfrysuour - Εκτροπέας Pulsar REDS 4-2-4 IEO, έτος 2012 - Μονοαξονικό αρθρωτό σύστημα μεταφοράς Pulsar, τύπου C075, έτος 2012 - Πρωτογενής συσκευασία Casmatic CMW 42 EV, έτος 2001 - 1 μηχάνημα συσκευασίας δεμάτων (bundling machine) Wrapmatic BFA 25, έτος 1993

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Dedpfxov Sv Ene Ahusur Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Tahun pembuatan: 2019, Kondisi: bekas, General Information The MobyLift is a handy tool designed to ergonomically lift, transport, and position products such as doors, table tops, panels, and other slabs. From an operational perspective, the MobyLift is a responsible investment. It is easy to use, helps reduce product damage, increases productivity, prevents back injuries, and thereby minimizes downtime due to illness. The MobyLift was developed in collaboration with reputable installation companies, combining their expertise and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: - Mobile base frame - Electric lifting and tilting system - Integrated automatic vacuum unit - Wireless, electric remote control The MobyLift MC-120-H is designed to be quickly and easily disassembled into several portable modules after switching off. This makes loading and unloading the MobyLift, or transporting it to another floor or building, very convenient. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator for continuous monitoring of battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilting angle, front to rear: 37°, electrically operated - Head joint swivel angle: 90° to either side - Head joint rotation: 360°, continuous - Lateral shift: 7 cm - Weight: 150 kg, modular design for easy disassembly Duedpfx Ahev Dauwousr Location: Nattheim

Kondisi: baru, ALTENDORF-F35-Typ-1-1000 Dujdpfx Aoxtbtpehuer

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Dujdeg Tu Rkjpfx Ahuor Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: sangat baik (bekas), Maggi Boring System 35 Multi-Spindle Boring Machine Number of spindles: 35 Spindle pitch: 32 mm Distance between first and last spindle: 1088 mm Maximum drilling depth: 85 mm Spindle speed: 2800 rpm Number of pneumatic clamps: 4 Operating pressure: 6–8 bar Dusdpsvx Aqdsfx Ahuor Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate