Beli Holzkraft Fs 41 Elite Tersa bekas (160)

Kondisi: baru, Tahun pembuatan: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° Rotatable Extraction Module For milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction module allows extraction guidance from below or above Robust metal impeller Standard high-quality undercarriage for enhanced stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Bjdpfx Afshk S Stspsll Dimensions and Weights Chip collection volume: 2 x 290 l Outer diameter, extraction inlet: 260 mm Outer diameter, extraction outlets: 3 x 120 mm, 1 x 100 mm Length approx.: 1900 mm Width/Depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data No-load speed: 2950 min⁻¹ Rated power input: 4.8 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 5.98 m² Noise Emission Max. sound pressure level: 98.3 dB(A) Airflow Nominal airflow rate: 7700 m³/h Max. negative pressure: 2800 Pa Scope of delivery: Two filter bags, two chip bags Location: Ex stock 54634 Bitburg - available at short notice -

Kondisi: baru, Tahun pembuatan: 2026, Small-format panel saw with tilting saw blade and high-quality aluminum sliding table. Cutting plane of the small-format panel saw located directly at the rolling table. Precision-guided sliding table made of aluminum, standard anodized finish. Large format table extension guided on telescopic arm and longitudinally adjustable. Standard table extension and width extension allow for easy handling of larger workpieces. The large-sized saw unit made of cast iron is doubly mounted to the cast table, guaranteeing stability, precision, smooth operation, and long service life. Large worktable made of ground cast iron—extremely robust and resistant. Smooth operation and precise cuts. Aluminum sliding table. Equipped with a proven ball-contact system used millions of times. Dust- and dirt-resistant due to minimal contact point between the ball and trapezoidal rail. 10-year HOLZKRAFT warranty on the wear of hardened guide rails. Telescopic stop. Extendable aluminum telescopic stop. Angle adjustable. Includes two professional folding stops. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: - Table extension - Table width extension - Anodized aluminum sliding table - Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical Data - Table dimensions: 1020 x 325 mm - Table height: 900 mm - Cross-cutting length: 1660 mm - Max. cutting height at 90° with scorer: 100 mm - Max. cutting height at 45° with scorer: 79 mm - Max. cross-cut width left of saw blade: 1270 mm - Cutting width with parallel fence: 900 mm - Saw blade tilt: 90° - 45° - Max. saw blade diameter with scorer: 315 mm - Max. saw blade diameter without scorer: 315 mm - Scoring saw blade diameter (option): 80 mm - Main saw blade speed: 4000 rpm - Scoring saw blade speed: 7600 rpm - Electrical connection: 400 V / 50 Hz - Motor power: 4.0 kW - Extraction port diameter: 120 mm - Extraction port diameter, blade guard: 60 mm - Weight: 295 kg Bedecnxamspfx Afpell Location: In stock at 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Heavy-duty machine frame ensures high torsional rigidity and vibration-free operation Improved grinding results due to separate geared motor-driven sanding belt oscillation Oscillation can be switched on or off as required Veneer edge sanding attachment with fine adjustment as standard Grooved infeed fence for sanding veneers flush Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for utilizing the full sanding belt width Height adjustment of the sanding table and sanding unit tilt via handwheels Height-adjustable additional table with extraction for sanding radii Optimal chip removal through extraction at the unit and at the cross table Automatic compensation for belt length differences by means of spring-loaded belt tensioning Dimensions and Weights Length approx.: 1900 mm Width/Depth approx.: 810 mm Height approx.: 1230 mm Weight approx.: 290 kg Dust Extraction Connection Extraction port diameter: 120 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 352 mm Work table height adjustment: 210 mm Cross table minimum height: 730 mm Electrical Data Power consumption: 3 kW Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 150 mm Belt speed: 20 m/s Sanding area length: 1050 mm Sanding area width: 220 mm Bledpfx Afoff Ed Topsl Tilt range: 0 – 45° Oscillation stroke: 20 mm Availability: Short-term

Kondisi: baru, Tahun pembuatan: 2026, Holzkraft Bandsaw HBS 533 S. Heavy-duty professional version with high dead weight for maximum running smoothness Exceptionally smooth and precise operation thanks to the torsion-resistant machine housing Large one-piece cast iron saw table, tiltable from 0° to +20°, with ground and polished surface Patented table tilt mechanism with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic saw blade roller guides Large cast iron parallel fence Rapid and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch for automatic shutdown when the door is opened Standard with mitre gauge Cast iron flywheels with special coating on running surfaces Viewing window for monitoring saw blade tracking Professional saw table guidance The heavy, robust saw table made of cast iron is easily and comfortably adjusted via handwheel and rack-and-pinion guidance Stepless tilting adjustment from 0° to +20° Patented Worktable dimensions: 750 x 530 mm Cutting speeds: 1400 m/min Flywheel diameter: 530 mm Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: upper / lower Saw table tilt: 0° - +45° Motor rating 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Bledpjb S Uzkefx Afpjl Dimensions: 1000 x 720 x 2040 mm Extraction port diameter: 2 x 100 mm Location: Ex stock Bitburg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Combination machine 4-way HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of the saw blade: 2,310 mm Cutting width at parallel fence: 820 mm Saw blade tilting: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutterhead diameter / Number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Bljdpfeci Tvhjx Afpjl Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter saw blade guard: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2025, en-GB: Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing operations (not suitable for dust) 180° rotatable extraction unit allows extraction from above or below Robust metal impeller Supplied as standard with a premium chassis for improved stability and easy manoeuvring Quick-release fasteners for filter and chip collection bags Fine filter bag with double weave Dimensions and Weights Chip collection volume: 2 x 120 l External diameter of extraction inlet: 203 mm External diameter of extraction outlet: 1 x 100 mm, 2 x 120 mm Length approx.: 1,500 mm Width/Depth approx.: 500 mm Height approx.: 2,100 mm Bedpfohk S Sdox Afpjll Weight approx.: 53 kg Electrical Data No-load speed: 2,950 rpm Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2 x 1.92 m² Noise Emission Max. sound pressure level: 87.5 dB(A) Air Flow Rate Nominal air flow: 2,800 m³/h Maximum negative pressure: 1,900 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: ex-stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Max. milling tool diameter Bledpfx Aohp Rcrjfpjl Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Kondisi: baru, Tahun pembuatan: 2025, en:Tischfräse minimax twf 55 es M 3 UP Professional joinery machine with motorized height and tilt adjustment of the milling spindle, four speeds, and electronic control system Article Number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminum sliding table ✔ Handle on sliding table ✔ Milling fence FLEX ONE: Heavy-duty professional design, automatic adjustment of the entire milling fence according to tool diameter, manual chip removal adjustment, fence swiveling device, aluminum fence jaws with connecting rails Spindle height adjustment motorized Telescopic mitre fence with two flip stops Spindle tilt adjustment motorized Supporting table ✔ Control system Ready 3: Programmed movement of the milling unit in two axes, automatic adjustment of the entire milling fence based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Positioning of control elements Operator panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and Weights Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Suction port diameter 2 x 120 mm Work Table Table length 1200 mm Sliding table length 1200 mm Table width 530 mm Sliding table width 360 mm Table height 900 mm Sliding table height 142 mm Setup Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Explanation of space requirement: The dimensions include maximum traversing paths or usable lengths. Working area width/depth 2300 mm Machine body length 1200 mm Explanation of working area: Add the listed dimensions to the space requirement to determine the recommended free floor area for the machine. Electrical Data Supply voltage 400 V Bljdpjhp Rc Ijfx Afpel Drive motor power 5.0 kW Mains frequency 50 Hz Milling Spindle Spindle tilt 0 to -45° Milling spindle speed display Control system display Usable spindle length 125 mm Spindle shaft diameter 30 mm Spindle speeds 3500/6000/8000/10000 rpm Milling Tool Diameter (Max.) Maximum tool diameter 240 mm Maximum profiling cutter diameter 240 mm Maximum retractable tool diameter 230 mm

Kondisi: baru, Tahun pembuatan: 2026, Bandschnellspannung via lever Upper belt guide with graphite coating 250 mm dynamically balanced band wheels ensure optimal drive. With electric height adjustment With extraction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces via pivoting sanding shoe Beveled edges Standard with right and left rotation The quick belt tensioning allows fast and trouble-free changing of sanding belts. Supplied partially assembled Dimensions and Weights Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust Extraction Connection Extraction port diameter: 2 x 140 mm Work Table(s) Work table height adjustment: 620 mm Max. working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-phase Blodpfoff Hdbox Afpel Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt running speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height, workpiece longer than work table: 180 mm Explanation regarding max. height, workpiece longer than work table: Machining of workpieces with protrusion over the right side of the work table is possible.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, ST 3 classic F 23 - Combined Saw-Spindle Moulder Machine Features: - With tilting saw blade, tilting spindle moulder, and sliding table made of anodised aluminium - Robust steel and cast iron construction - Large support surface and precision-cast iron table - High-precision sliding table made of anodised aluminium (slide travel 2250 mm) - Large outfeed table (900 x 600 mm) with extendable aluminium telescopic fence - Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°-45° - Saw rip fence with fine adjustment - Stable saw unit and large double-trunnion spindle moulder assembly ensure maximum stability, precision, smooth running, and long service life Blodpfx Ascnwydofpel - Solid and precise machine table made from stress-relieved cast iron - Three spindle speeds, manually adjustable from 3,500 - 10,000 rpm - Spindle with forward and reverse rotation - Standard spindle moulder guard - Two 5.0 kW motors with ample power reserves Cast iron spindle moulder unit: - Secured on both sides at the top - Precision ball bearings at the top - Close to the lever point - Four optimally graduated spindle speeds enable workpiece sharpening Powerful motors: - Industrial motors suitable for continuous operation (100% duty cycle at full load) Scope of delivery: - Spindle moulder guard - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops Technical data: - Dimensions cast iron work table: 1112 x 430 mm - Crosscutting length: 2250 mm - Max. saw blade diameter with/without scoring: 315 mm - Max. cutting height at 90°/45°: 100/70 mm - Max. crosscut width: 2660 mm - Saw blade tilt: 90° - 45° - Cutting width: 900 mm - Speed: 4000 rpm - Spindle moulder: - - Spindle tilt: 90° - 45° - Useful spindle length: 100 mm - Max. tool diameter: 210 mm - Max. tenon tool diameter: 275 mm - Max. retractable tool diameter: 180 mm - Speeds: 3,500/7,000/10,000 rpm - General: - - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) - Weight: 470 kg - Extraction port diameter: 2 x 120 mm - Extraction port diameter (blade guard): 60 mm Location: In stock at 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2026, Holzkraft HBS Precision Bandsaws for Woodworking Professionals – Top Quality, Workmanship, and Price-Performance Ratio Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing. Large, one-piece grey cast iron saw table with precisely ground and polished surface. Quick-release blade tensioning via excenter lever at the rear of the machine. Supplied as standard with two cutting speeds. Precise 3-roller blade guides provided as standard, above and below, from model HBS 351 onwards. Fast cutting height adjustment via handwheel and rack with millimeter scale. Smooth-running aluminum parallel fence with excenter quick-lock and magnifier. Standard mitre fence, adjustable ±60 degrees. Aluminum parallel fence with excenter quick-locking system. Technical Specifications: Bodpfjvk Sd Dex Afpsll Work table dimensions: 610 x 431 mm Blade speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with fence: 370 mm; without fence: 410 mm Blade length: 3345 mm Precision 3-roller guide: above/below Table tilt: -10° to +45° Motor power: 1550 W / 400 V Weight: 130 kg Dimensions (mm): 680 x 512 x 2048 Extraction port diameter: 2 x 100 mm Location: in stock, 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 by Holzkraft For wood dust and shavings, designed for commercial use Item No.: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outer Diameter Extraction Connection (inlet): 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Air Volume Flow Rated Airflow: 1448 m³/h Dust Class: H3 Scope of Delivery: - Metal impeller - Service opening for cleaning the bypass filter Bljdpfx Afehkzttjpel - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed castors and two swivel castors with locking brakes - Manual filter cleaning Item No. 5131620 Location: In stock, 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2025, en_Holzkraft_RLA210_Dust_Extraction_Unit Bodpfxshk Dfro Afpsll

Kondisi: baru, Tahun pembuatan: 2025, Chips Extraction Unit ASA 4303 mobile, with 180° rotatable extraction unit Suitable for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit allows for extraction from below or above Durable metal impeller Equipped as standard with a high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags High-end double-woven fine filter bag Dimensions and weights Chip collection volume: 2 x 215 l Suction inlet diameter (outer): 260 mm Suction outlet diameter (outer): 2 x 100 mm, 2 x 120 mm Length approx.: 1700 mm Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical data No-load speed: 2950 min⁻¹ Power consumption: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise emission Max. sound pressure level: 89.9 dB(A) Airflow Nominal airflow volume: 4300 m³/h Max. negative pressure: 2000 Pa Blsdpshk S Slefx Afpsl Scope of delivery: Two filter bags, two chip bags Location: In stock at 54634 Bitburg - available immediately -

Kondisi: baru, Tahun pembuatan: 2025, Spindle moulder type: minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Article No.: 5502045 Brand: Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Net weight approx.: 290 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1000 mm Sliding table length: 1000 mm Work table width: 435 mm Sliding table width: 270 mm Table height: 900 mm Installation Information Space requirement (length): 1945 mm Machine body width/depth: 710 mm Space requirement (width/depth): 2220 mm Working area (length): 1600 mm Explanation of space requirement: Maximum travel range or effective lengths are considered in these dimensions. Working area (width/depth): 1600 mm Machine body length: 1000 mm Explanation of working area: Add the working area dimensions to the space requirement to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Main drive motor power: 5.0 kW Mains frequency: 50 Hz Spindle Spindle tilt: 0 to -45° Spindle speeds: 3500/7000/10000 rpm Usable spindle length: 100 mm Spindle shaft diameter: 30 mm Maximum spindle projection above table: 130 mm Maximum Cutter Diameters Maximum tool diameter (retractable): 180 mm Maximum tenoning cutter diameter: 275 mm Maximum profile cutter diameter: 210 mm INCLUDED ACCESSORIES Curved workpiece guard Bledpfx Aohp Rcyjfpol Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Kondisi: baru, Tahun pembuatan: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodized aluminium sliding table Rigid steel/cast iron construction Bjdpfx Afehp Rdlepsll Large support surface and precision cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with up to 2660 mm extendable aluminium telescopic fence with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Robust saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3500 to 10000 rpm Spindle moulder with reversible rotation Standard arching cutter guard Safety reversing fence jaws made of aluminium Two motors with high performance reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx.: 470 kg Extraction connection Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Electrical data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle moulder Spindle tilt: 0 – -45 ° Useful spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter not retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular saw unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 2660 mm Saw blade tilt: 90 45 ° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 78 mm (Main) saw blade diameter: 315 mm Remark (main) saw blade diameter: independent of scoring blade (Main) saw blade speed: 4000 rpm Sliding table and table Table length: 1112 mm Table width: 430 mm Scope of delivery: Arching cutter guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2026, en-Holzkraft sliding table saw with scoring unit Compact sliding table saw with tiltable saw blade and high-quality anodized aluminum sliding table Cutting area of the compact sliding table saw is located directly at the rolling table Precision-guided sliding table made of aluminum, anodized as standard Large-format table extension on telescopic arm, adjustable lengthwise Standard table extension and width extension allow easy handling of larger workpieces The large dimensioned saw assembly made of cast iron is mounted twice to the cast base and guarantees stability, precision, smooth running, and long service life Large working table made of ground cast iron, extremely robust and resistant Smooth operation and precise cuts Aluminum sliding table Tested and proven ball contact system—millions in use Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic fence Extendable aluminum telescopic fence Angle adjustable With two professional folding stops Ek2a0i2ik Parallel fence Standard with fine adjustment and quick release Bsdpfxsih Dwvo Afpell Scope of delivery: Table extension Table width extension Anodized aluminum sliding table Parallel fence with round bar guidance and fine adjustment Model SC 2 classic Item No. 5504215 Technical Data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut capacity: 1660 mm Maximum cutting height at 90° with scorer: 100 mm Maximum cutting height at 45° with scorer: 79 mm Maximum crosscut width left of saw blade: 1270 mm Rip width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scorer: 315 mm Saw blade diameter max. without scorer: 315 mm Scoring blade diameter (optional): 80 mm Main saw blade speed: 4000 rpm Scoring saw blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction nozzle diameter: 120 mm Extraction nozzle diameter on saw blade protector: 60 mm Weight: 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Designed for wood chips and wood dust. Engineered for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in its class Very quiet operation Application Area Clean air extraction systems for wood chips and wood dust Specifically designed for commercial environments Suitable for all woodworking machines with a matching extraction port diameter Can also be used for multiple dust sources High-quality, well-thought-out construction Rugged and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, ensuring versatile use Large inspection openings Bjdpfx Afjcnw T Iopjll Large-capacity, mobile chip containers with clamp lever and chip collection bag Unit comes fully assembled upon delivery, allowing for immediate use Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made from polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic version, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control box Fan positioned downstream of the filter Equipment Details: Featuring innovative locking mechanism for secure container positioning All units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³ Scope of Delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with brakes Manual cleaning Model RLA 160 Article No. 5131620 Technical Data Suction port diameter: 160 mm Nominal airflow: 1,448 m³/h Maximum airflow: 2,400 m³/h Negative pressure at nominal airflow: 2,247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, minimax ti 55es LL - Spindle Moulder The image shows the T 55 i elite s standard version. The professional woodworking machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension cast iron spindle unit, tilting backwards up to -45°. Spindle speeds indicated by LEDs. Bodpfxjdqzh Rj Afpjll Fast and simple speed change via eccentric clamping. Reversible spindle rotation (clockwise/counterclockwise). Height and tilt display with 0.1 mm accuracy. Heavy-duty professional fence: fine adjustment via rack-and-pinion, numerical display, aluminum fence jaws, 3-position adjustable for quick repeat settings. Scope of delivery: - Aluminum fence jaws - Curved milling guard - Table extension left and right Model: minimax ti 55es LL Item no.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table dimensions: -- Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. tool diameter (retractable): 230 mm Max. cutterhead diameter (tenoning): 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Kondisi: baru, Tahun pembuatan: 2026, en_Holzkraft_Minimax_ST_5es Blsdpfsd Hx Hmox Afpsl

Kondisi: baru, Tahun pembuatan: 2026, Format Circular Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tiltable saw blade and anodized aluminum sliding table Article number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net) approx.: 690 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Duty type (main drive motor): S6 Duty cycle (main drive motor): 40% Sliding Table and Work Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. cross-cut width left of saw blade: 3200 mm Edging length: 3200 mm Saw blade tilt: 90° - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height note: Independent from scorer blade Saw blade diameter: 400 mm Saw blade diameter note: Independent from scorer blade Saw blade speed: 3500/5000 rpm Scoring Unit Scoring saw blade diameter: 120 mm Scoring saw blade speed: 9200 rpm EQUIPMENT Equipment Details Scoring unit with separate motor Anodized aluminum sliding table Handle for sliding table On/Off switch on sliding table for main and scoring saw blade motors Squaring frame Material roller on squaring frame Rip fence with round bar guide Stops: two professional folding stops Edging shoe Eccentric clamp Table extension Table widening Saw blade oscillation guard Motorized height adjustment and tilting of the saw unit, digital display for tilt Location: ex stock 54634 Bitburg Bledpjxw N N Hefx Afpol - immediately available -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Holzkraft edge sanding machine Model: KSO 200 F with veneer sanding device Sanding unit tiltable up to 45° via lever The welded steel machine base ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as required Sanding surface with graphite coating for longer belt life Height-adjustable sanding table for use of the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length differences With dual dust extraction Extendable roller table extension With rubber-coated sanding roller Veneered edge sanding device with contact shoe with fine adjustment, pressure relief rollers, and positioning rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Drive motor power 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Bljdjy Iu N Aepfx Afpel Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Professional workbenches Precise and meticulous craftsmanship Constructed entirely from steamed, solid beech All critical edges are rounded Eco-friendly, oiled surfaces Standard with tool drawer Bledpfxec Uydae Afpjl Both vise guide rods are precisely and stably guided in a cast iron housing Equipped with a smooth-action trapezoidal threaded spindle Features a French front vise and German-style tail vise with linear guide, two short round bench dogs, two long round bench dogs, drawer, and side compartment Finger-jointing in the tail vise and rear of the side compartment Length of working surface without vises: 1915 mm Width/depth of working surface without vises: 615 mm Working height: 870 mm Front vise length: 520 mm Tail vise length: 450 mm Front vise width: 70 mm Tail vise width: 140 mm Front vise clamping capacity: 190 mm Tail vise clamping capacity: 180 mm Front vise clamping capacity to center of round dog: 225 mm Tail vise clamping capacity to center of round dog: 265 mm Workbench top thickness: 50 mm Overall length (product): 2120 mm Overall width/depth (product): 790 mm Overall height (product): 870 mm Weight (net): 91 kg Location: In stock at 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2025, Wood Chip Extraction Unit Bljdpfshk S Shjx Afpel ASA 1903 Mobile, with 180° Rotatable Extraction Unit For chips from milling, planing, and sawing operations (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality chassis for better stability and easy maneuvering Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 110 l External diameter of inlet extraction nozzle: 203 mm External diameter of outlet extraction nozzle: 1 x 100 mm, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 rpm Power consumption: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface: 1.92 m² Noise Emission Maximum sound pressure level: 85.7 dB(A) Airflow Nominal airflow: 1900 m³/h Maximum vacuum: 1700 Pa Scope of Delivery: Filter bag, chip collection bag Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Raw Air Extraction Unit ASA 203 With Standard Chassis Dimensions and Weights Chip Collection Capacity: 175 l Nominal Diameter (Outer) of Suction Nozzle (Inlet): 200 mm Length approx.: 1061 mm Width/Depth approx.: 577 mm Blsdpfohk S Szox Afpsl Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Surface Area: 2.2 m² Noise Emission Maximum Sound Pressure Level: 84 dB(A) Air Flow Rate Nominal Airflow: 2500 m³/h Suitable for milling, planing, and saw chips (not dust) Significantly reduced residual dust content due to BIA-certified filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for filter and chip bags enable trouble-free maintenance Sturdy, premium-grade construction Easy to move thanks to swivel castors Low energy consumption Extraction units comply with dust class L Scope of Delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose