Beli Holzkraft Sc 2 bekas (177)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Holzkraft
Iklan kecil
Bitburg
11.321 km
Gergaji meja geser
HolzkraftSC 2 Classic - sofort verfügbar -
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Small-format panel saw with tilting saw blade and high-quality aluminum sliding table.
Cutting plane of the small-format panel saw located directly at the rolling table.
Precision-guided sliding table made of aluminum, standard anodized finish.
Large format table extension guided on telescopic arm and longitudinally adjustable.
Standard table extension and width extension allow for easy handling of larger workpieces.
The large-sized saw unit made of cast iron is doubly mounted to the cast table, guaranteeing stability, precision, smooth operation, and long service life.
Large worktable made of ground cast iron—extremely robust and resistant.
Smooth operation and precise cuts.
Aluminum sliding table.
Equipped with a proven ball-contact system used millions of times.
Dust- and dirt-resistant due to minimal contact point between the ball and trapezoidal rail.
10-year HOLZKRAFT warranty on the wear of hardened guide rails.
Telescopic stop.
Extendable aluminum telescopic stop.
Angle adjustable.
Includes two professional folding stops.
Parallel fence.
Standard with fine adjustment and quick clamping.
Scope of delivery:
- Table extension
- Table width extension
Dujdpfscnxamjx Airou
- Anodized aluminum sliding table
- Parallel fence with round bar guide and fine adjustment
Model: SC 2 classic
Item No.: 5504215
Technical Data
- Table dimensions: 1020 x 325 mm
- Table height: 900 mm
- Cross-cutting length: 1660 mm
- Max. cutting height at 90° with scorer: 100 mm
- Max. cutting height at 45° with scorer: 79 mm
- Max. cross-cut width left of saw blade: 1270 mm
- Cutting width with parallel fence: 900 mm
- Saw blade tilt: 90° - 45°
- Max. saw blade diameter with scorer: 315 mm
- Max. saw blade diameter without scorer: 315 mm
- Scoring saw blade diameter (option): 80 mm
- Main saw blade speed: 4000 rpm
- Scoring saw blade speed: 7600 rpm
- Electrical connection: 400 V / 50 Hz
- Motor power: 4.0 kW
- Extraction port diameter: 120 mm
- Extraction port diameter, blade guard: 60 mm
- Weight: 295 kg
Location: In stock at 54634 Bitburg
- Immediately available -
Iklan kecil
Jerman
11.122 km
Gergaji meja geser
Holzkraftsc 4e 27
Hubungi
Kondisi: bekas, Tahun pembuatan: 2024, Used machine
Year of manufacture: 2022
Commissioning: 8/2024
As-new condition
The heavy-duty work table, made from strongly ribbed grey cast iron, and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation.
Smooth-running and precise sliding table made of anodized aluminum, featuring a proven ball contact system for permanently easy gliding on hardened guideways, with a 10-year warranty against guideway wear.
Grey cast iron saw unit with permanently precise dual tilt-segment guides and zero-point tilting; 6-year HOLZKRAFT warranty against wear on tilt segments.
Equipped with a powerful three-phase motor.
Saw blade tilt is displayed on a scale on the unit.
Facilitated panel feeding thanks to large squaring frame with support roller.
Angle-adjustable aluminum telescopic fence with two professional flip stops.
Fold-away parallel fence, with quick-clamping and fine adjustment.
Standard equipment includes table extension, table widening, and eccentric clamp.
Made in Italy
Sliding Table & Main Table
Sliding table length: 2,600 mm
Sliding table width: 360 mm
Sliding table height: 142 mm
Table length: 840 mm
Table width: 560 mm
Table height: 900 mm
Dedpoxua N Ssfx Aireuu
Circular Saw Unit
Cutting width with parallel fence: 900 mm
Max. crosscut width left of saw blade: 3,200 mm
Squaring length: 2,660 mm
Saw blade tilt: 90 – 45°
Max. cutting height at 90°: 100 mm
Max. cutting height at 45°: 70 mm
Note on max. cutting height: Independent from scoring blade
Saw blade diameter: 315 mm
Note on saw blade diameter: Independent from scoring blade
Saw blade speed: 3,800 rpm
Motor: 5.5 kW
The hose shown in the picture is not included in the scope of delivery!
Availability: short notice
Location: Flörsheim
Iklan kecil
Bad Honnef
11.249 km
Gergaji bundar HOLZKRAFT sc 2c - Mesin pameran -
HOLZKRAFTsc 2c
Hubungi
Kondisi: baru, Panel Saw HOLZKRAFT sc 2c
- Demonstration machine -
Tiltable blade,
Parallel fence with fine adjustment
----- Technical Data -----
Extraction port diameter: 120 / 60 mm
Table height: 900 mm
Speed: 4,000 rpm
Max. saw blade diameter: 315 mm
Dedpfxsu R Sy Ns Airjuu
Cutting width with parallel fence: 900 mm
Cutting height at 90/45°: 100 / 79 mm
Cutting length: 1,600 mm
Tilting range: 90 - 45 °
Dimensions (LxW): 1,020 x 325 mm
Weight: 295 kg
- New demonstration machine -

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Jerman
11.122 km
Gergaji meja geser
Holzkraftsc 2c Kompakt
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, New machine
Djdpfxewb Eh Ns Aireuu
Year of manufacture: 2024
Cutting plane directly at the saw blade
Large-dimensioned saw unit made of cast iron, double-mounted on the cast iron table – ensures stability, precision, smooth operation, and long service life. 6-year Holzkraft warranty on segment swivel wear
Precision-guided sliding table made of anodized aluminum as standard
10-year HOLZKRAFT warranty on the sliding table guideways
Parallel fence with round bar guide and fine adjustment as standard
Large worktable made of milled cast iron
Smooth operation and precise cuts
Standard table extension and width extension for easy handling of larger workpieces
Extendable aluminum telescopic stop with angle adjustment and two professional flip stops
Made in Italy
Motor: 4.0 kW – 400 V
Saw blade tilt: 90° – 45°
Sliding table length: 1600 mm
Table length: 1020 mm
Table width: 325 mm
Cutting width with parallel fence: 700 mm
Max. cutting height at 90°: 100 mm
Max. cutting height at 45°: 79 mm
Saw blade diameter: 315 mm
Saw blade speed: 315 mm
Max. cross cut width left of the saw blade: 1660 mm
Scoring saw blade diameter: 80 mm
Scoring saw speed: 7600 rpm
Weight: approx. 276 kg
Attention! The parallel fence and the right table extension are not shown in the pictures
Availability: short-term
Location: Flörsheim
Iklan kecil
Egenhofen
11.027 km
Gergaji meja geser
Holzkraftminimax sc 3c 23
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Panjang meja geser: 2300 mm
Lebar pemotongan pada pagar lebar: 900 mm
Lebar pemotongan pada pengukur potong melintang: 2310 mm
Kedalaman potong: 100 mm
Penyayat pendahulu: tidak ada
Rentang kemiringan mata gergaji: +45°
Penyesuaian tinggi mata gergaji: roda tangan
Penyesuaian kemiringan mata gergaji: roda tangan
Penyesuaian pagar lebar: manual
Indikasi sudut mata gergaji: skala
Indikasi tinggi potong: -
Indikasi pagar lebar: skala
Indikasi penggaris potong melintang: skala
Penyesuaian penyayat pendahulu: manual
Diameter mata gergaji: 310 mm
Dusdsxrbh Djpfx Airju
Kecepatan putar: 3500 rpm
Daya motor: 5 kW
Koneksi ekstraksi: 80 dan 120 mm
Panjang mesin: 3500 mm
Lebar mesin: 2200 mm
Berat: 380 kg
Iklan kecil
Gerolzhofen
11.055 km
Gergaji meja geser
SCM / Holzkraftminimax SC 3 classic 23
Hubungi
Kondisi: baru, - NEW -
Description
Cutting level directly at the saw blade
Heavy-duty grey cast iron steel construction
Precision-guided aluminium sliding table, standard anodized finish
Large support table guided on telescopic arm and adjustable lengthwise
Extendable aluminium telescopic fence with professional flip stops, angle adjustable
Parallel fence with quick clamping and fine adjustment
Large worktable made from milled grey cast iron remains permanently flat
Standard table extension and table widening enable easy handling of large workpieces
Smooth operation and precise cuts
Equipped with a powerful three-phase motor
The large-size saw unit made of cast iron is double-mounted on the table, guaranteeing stability, precision, quiet operation, and long service life
Maximum cutting height is achieved even with a scoring unit installed
Equipment details:
Double-trunnion saw unit
- Large size, made of steel/cast iron
- Positioned close to the saw blade, mounted on both sides for precision, smooth running, and durability
- Height and tilt adjustable up to 45° via hand crank
- Maximum cutting height even with scoring unit installed
- Also available with scoring unit
Telescopic fence
- Extendable telescopic fence up to a max. of 2550 mm
- Angle adjustable
- With professional flip stops
Aluminium sliding table
- Proven ball contact system
- Resistant to dust and dirt due to minimal contact point between ball and trapezoidal rail
- 10-year Holzkraft warranty on guideway wear
Parallel fence with round bar guide
- With fine adjustment and quick clamping
- Sturdy round bar guide made of ground steel, 45 mm diameter
- Standard fold-down feature for cutting large workpieces
Technical data:
Dimensions and weights
Weight (net) approx. 380 kg
Dust extraction connection
Extraction port diameter 120 mm
Extraction port diameter saw blade guard 60 mm
Machine body length 1388 mm
Working area length 1000 mm
Machine body width/depth 689 mm
Working area width/depth 2000 mm
Required space length 5118 mm
Required space width/depth 3830 mm
Electrical data
Connection voltage 400 V
Drive motor power 5.0 kW
Phase(s) 3 Ph
Rated operating mode S6
Current type AC
Duty cycle drive motor 40 %
Mains frequency 50 Hz
Sliding table and worktable
Sliding table length 2250 mm
Table length 840 mm
Sliding table width 270 mm
Table width 560 mm
Duodpfx Aovyuqfeireu
Sliding table height 124 mm
Table height 900 mm
Circular saw unit
Cutting width with parallel fence 900 mm
Max. cutting height 90° 90 mm
Max. crosscut width left of saw blade 2310 mm
Max. cutting height 45° 63 mm
Edging length 2250 mm
Saw blade diameter 315 mm
Saw blade tilting 90 - 45°
Saw blade speed 4000 rpm
Art. No. 5504323
Iklan kecil
Gerolzhofen
11.055 km
Gergaji meja geser
SCM / Holzkraftsc 2c
Hubungi
Kondisi: baru, - NEW -
- Cutting plane directly at the saw blade
- Large-dimensioned cast iron saw unit, double-mounted on the cast iron table – guarantee for stability, precision, smooth operation and long service life
- Precision-guided aluminum sliding table, anodized as standard
- 10-year HOLZKRAFT warranty on the wear of the sliding table guide rails
- Parallel fence with round bar guide and fine adjustment as standard
- Large work table made of milled cast iron
Dusdpfx Ajvyup Ujirju
- Smooth operation and precise cuts
- Standard table extension and table enlargement allow easy handling of larger workpieces
- Extendable aluminum telescopic fence with angle adjustment and two professional folding stops
- Made in Italy
TECHNICAL DATA
Dimensions and weights
Net weight approx. 295 kg
Extraction connection
Extraction port diameter 120 mm
Extraction port diameter (saw blade guard) 60 mm
Installation information
Transport width 700 mm
Machine body length 802 mm
Machine body width/depth 615 mm
Required space length 3860 mm
Required space width/depth 2750 mm
Explanation of required space
Dimensions include maximum travel paths or usable lengths
Working area length 1000 mm
Working area width/depth 2000 mm
Explanation of working area
Please add the indicated working area dimensions to the required space to determine the recommended free installation area for the machine.
Electrical data
Connection voltage 400 V
Mains frequency 50 Hz
Drive motor power 4.0 kW
Drive motor duty type S 6
Drive motor duty cycle 40 %
Sliding table and table
Sliding table length 1600 mm
Sliding table width 270 mm
Sliding table height 124 mm
Table length 1020 mm
Table width 325 mm
Table height 860 mm
Circular saw unit
Cutting width with parallel fence 900 mm
Max. crosscut width left of saw blade 1660 mm
Ripping length 1600 mm
Saw blade tilt 90 - 45°
Max. cutting height at 90°: 100 mm
Max. cutting height at 45°: 79 mm
Saw blade diameter 315 mm
Saw blade speed 4000 rpm
EQUIPMENT
Anodized aluminum sliding table
Handle for sliding table
Ripping frame
Saw parallel fence with round bar guide
Two professional folding stops
Ripping shoe
Eccentric clamp
Table widening
Table extension
Saw blade guard hood
Iklan kecil
Bitburg
11.321 km
Gergaji meja geser yang ringkas dengan perangkat penilaian
HolzkraftMinimax SC2c VR - sofort verfügbar
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, en-Holzkraft sliding table saw with scoring unit
Compact sliding table saw with tiltable saw blade and high-quality anodized aluminum sliding table
Cutting area of the compact sliding table saw is located directly at the rolling table
Precision-guided sliding table made of aluminum, anodized as standard
Large-format table extension on telescopic arm, adjustable lengthwise
Standard table extension and width extension allow easy handling of larger workpieces
The large dimensioned saw assembly made of cast iron is mounted twice to the cast base and guarantees stability, precision, smooth running, and long service life
Large working table made of ground cast iron, extremely robust and resistant
Smooth operation and precise cuts
Aluminum sliding table
Tested and proven ball contact system—millions in use
Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail
10 years HOLZKRAFT warranty on wear of hardened guideways
Telescopic fence
Extendable aluminum telescopic fence
Angle adjustable
With two professional folding stops
Ek2a0i2ik
Parallel fence
Standard with fine adjustment and quick release
Scope of delivery:
Table extension
Table width extension
Anodized aluminum sliding table
Parallel fence with round bar guidance and fine adjustment
Model SC 2 classic
Item No. 5504215
Technical Data
Table dimensions: 1020 x 325 mm
Table height: 900 mm
Crosscut capacity: 1660 mm
Maximum cutting height at 90° with scorer: 100 mm
Maximum cutting height at 45° with scorer: 79 mm
Maximum crosscut width left of saw blade: 1270 mm
Rip width with parallel fence: 900 mm
Saw blade tilt: 90° - 45°
Saw blade diameter max. with scorer: 315 mm
Saw blade diameter max. without scorer: 315 mm
Scoring blade diameter (optional): 80 mm
Main saw blade speed: 4000 rpm
Scoring saw blade speed: 7600 rpm
Electrical connection: 400 V / 50 Hz
Djdpfoih Dwvex Airjuu
Motor power: 4.0 kW
Extraction nozzle diameter: 120 mm
Extraction nozzle diameter on saw blade protector: 60 mm
Weight: 295 kg
Location: Ex stock 54634 Bitburg
- immediately available -
Iklan kecil
Gerolzhofen
11.055 km
Gergaji meja geser
SCM / HolzkraftTyp sc 1g
Hubungi
Kondisi: baru, The worktable is made of heavily ribbed cast iron and the base frame of welded steel, ensuring torsional rigidity and vibration-free operation. This is a premium-quality machine at a true entry-level price.
Unique in its performance class:
- Format sliding table made from anodized aluminum for maximum cutting precision
- Cutting plane directly at the saw blade
- Tiltable saw blade unit from 90–45°
- Table extension arm with aluminum crosscut fence and adjustable flip stop for panels and large workpieces
- Parallel fence with round bar guide and fine adjustment
- Powerful motor
- Made in Europe
Dimensions and weights
Net weight (approx.): 170 kg
Dust extraction connection
Extraction port diameter: 120 mm
Saw blade guard extraction port diameter: 60 mm
Transport width: 680 mm
Working area: 1600 mm x 2300 mm
Footprint required: 2613.5 mm x 2134 mm
Please add the given dimensions to the footprint to ensure the recommended installation space for the machine.
The dimensions account for maximum travel distances or usable lengths.
Electrical data
Duodpfx Ajvxr S Rsireu
Connection voltage: 400 V
Drive motor: 1.8 kW
Phases: 3-phase
Rated operation mode for drive motor: S6
Current type: AC
Duty cycle for drive motor: 40%
Mains frequency: 50 Hz
Sliding table and worktable
Format sliding table: 1140 mm x 200 mm x 70 mm
Worktable: 1024 mm x 224 mm x 900 mm
Circular saw unit
Cutting width with parallel fence: 700 mm
Max. cutting height at 90°: 67 mm
Max. crosscut width left of saw blade: 1200 mm
Max. cutting height at 45°: 40 mm
Edging length: 1200 mm
Saw blade diameter: 250 mm
Saw blade tilt: 90–45°
Saw blade speed: 3900 min¯¹
Scope of delivery
Table extension
Anodized aluminum format sliding table
Parallel fence with round bar guide and fine adjustment
Aluminum flip stop
Excenter clamp
Art.-No. 5504113
Iklan kecil
Thalmässing
11.007 km
Sander sabuk lebar
Holzkraft CasadeiLIBRA 35/2 RCT 110
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AB00021322, lebar total: 1.820 mm, tinggi total: 1.960 mm, panjang total: 1.650 mm, lebar kerja: 1.100 mm, berat keseluruhan: 1.160 kg, daya: 11 kW (14,96 hp), panjang sabuk penggiling: 1.900 mm, tinggi benda kerja (maks.): 170 mm, lebar sabuk penghalus: 1.115 mm, tegangan masuk: 400 V, - The LIBRA 35 calibration and fine grinding machine is an extremely versatile and multipurpose machine.
Dsdpfewwkuyex Airjuu
- Robust monoblock steel machine body, reinforced with tubes, with high-mounted working units for maximum rigidity.
- User-friendly control panel positioned at the front for easy operation.
- Motorized table height adjustment.
- Digital display for working height.
- Electronically controlled sanding belt oscillation with reduced compressed air requirement.
- Automatic star-delta starting for the main motor.
- Natural rubber feed belt with negative profile.
- Support table with two rollers at the infeed and outfeed of the feed belt.
- Belt feed driven by a geared motor with two speeds.
- Flexible steel pressure rail in front of the first unit.
- Rubber pressure rollers positioned before and after each working unit.
- Pneumatic belt tensioning per unit with decimal adjustment for grit/belt thickness.
Iklan kecil
Jerman
11.122 km
Unit hisap bergerak
HolzkraftASA 2403
Hubungi
Kondisi: bekas, Tahun pembuatan: 2012, perangkat penghisap bekasTahun pembuatan: 2012Kapasitas nominal: 2789 m³/jamLuas filter: 1,8 m²Tekanan negatif maks.: 1668 PaVolume penampung serpihan: 160 lMotor: 1,1 kW, 400 VStutzen penghisap: 1 x 120 mm, 1 x 100 mmKetersediaan: segeraLokasi gudang: Hochheim
Dujdpex Rv Dtofx Airsu
Iklan kecil
Jerman
11.122 km
Sistem ekstraksi Holzkraft RLA 210
HolzkraftRLA 210
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Penyedot debu baru
Tahun produksi: 2024
Untuk debu kayu dan serbuk kayu, dirancang untuk penggunaan komersial
Telah diuji debu menurut H3, sisa debu kurang dari 0,1 mg/m³
Cocok untuk penyedotan dan pemisahan serbuk kayu dan plastik kering
Daya hisap tinggi dengan kebutuhan ruang minimal
Performa maksimal di kelasnya
Sangat sunyi
Semua model dilengkapi dengan pelindung benturan
Dimensi (PxLxT): 1755 x 830 x 1800 mm
Volume penampungan serbuk: 2 x 165 l
Diameter inlet hisap: 200 mm
Berat sekitar 259 kg
Luas permukaan filter: 22 m²
Pembersihan filter manual
Duedpsyq T Hksfx Airju
Tingkat tekanan suara: 72 dB(A)
Aliran volume nominal: 2262 m³/jam
Aliran volume maksimum: 3700 m³/jam
Motor: 400 V, 3 kW
Ketersediaan: cepat
Lokasi gudang: Flörsheim
Iklan kecil
Bitburg
11.321 km
Perangkat udara bersih seluler
HolzkraftRLA 125
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications.
All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³.
High extraction performance with minimal space requirements
Maximum performance in this class
Very quiet operation
Dsdpfxecnw U De Aireuu
Application area:
Clean air extraction units for wood chips and wood dust
Designed for commercial use
Suitable for all woodworking machines with the corresponding extraction port diameter
Can also be used for multiple dust sources
High-quality, well-designed construction
Robust and compact housing made of galvanized sheet steel
Extraction port can be easily converted from left to right, offering flexible use
Large maintenance openings
Large-capacity, mobile chip containers with clamping bracket and chip collection bag
System is delivered completely assembled – ready for immediate use
Mobile unit
Filter description:
Ultra-compact design with maximum filter surface area
Filter material made from polyester fleece, aluminized, washable, providing a long service life
Filter supplied as standard in antistatic design, BIA category M-tested and approved
Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel
The fan is installed downstream of the filter
Standard features:
Innovative locking device for secure container positioning
All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³
Scope of delivery:
Metal impeller
Maintenance opening for cleaning the bypass filter
5 m connection cable with 5-pin CEE plug and phase inverter
2 fixed and 2 swivel castors with locking brake
Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls
Manual filter cleaning
Optional sound pressure silencer available
Model: RLA 125 M
Item No.: 5131256
Technical Data
Extraction port diameter: 125 mm
Motor power: 2.2 kW
Mains voltage: 400 V
Mains frequency: 50 Hz
Nominal air flow rate: 1095 m³/h
Max. air flow rate: [not specified]
Negative pressure at nominal flow: [not specified]
Filter surface area: 5.31 m²
Filter material: Dust class M
Residual dust content: 0.1 mg/m³
Chip collection volume: 1 x 239 l
Max. sound pressure level: 73 dB(A)
Dimensions (L x W x H): 1100 x 830 x 1650 mm
Height from bottom edge of extraction port to floor: 850 mm
Weight: 194 kg
Location: Arriving in stock at 54634 Bitburg
Iklan kecil
Bitburg
11.321 km
Gabungan planer dan pengental
Holzkraftminimax fs 52es TERSA Digital - sofort
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Holzkraft Combined Planer-Thicknesser Machine
- Immediately Available -
Ideal for demanding craftsmen and joiners
The particularly long jointer tables made from a single piece enable easy planing of workpieces
The worktables are made of cast iron, making them resistant and permanently flat
Jointer tables open simultaneously to the rear with spring support for quick and convenient conversion
Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time
The helically grooved steel infeed roller ensures constant and uniform wood feed
Rubber outfeed roller at the thicknesser outlet provides consistent wood extraction
Djdpsih Dxdsfx Aireuu
Material feed with four speeds
Thicknessing table height adjustment via handwheel with integrated thickness scale
DIGITAL version: with electric thicknessing table height adjustment and digital display
On/Off switch in operator position
Powerful industrial motor
The high machine weight ensures maximum precision and smooth operation.
Provision for slot mortising unit
Quality Made in Italy
Dimensions and Weights
Length approx. 2250 mm
Width/Depth approx. 1370 mm
Weight approx. 695 kg
Jointer
Total table length 2250 mm
Max. cutting depth 5 mm
Fence length 1200 mm
Fence height 150 mm
Dust Extraction Connection
Extraction port diameter thicknesser 1 x 120 mm
Drive Power
Main motor 7 kW
Installation Information
Required space length 2250 mm
Required space width/depth 1440 mm
Note: The specified dimensions account for the maximum travel paths or usable lengths.
Thicknesser
Thicknessing table length 850 mm
Thicknessing table width 520 mm
Min. working height 3 mm
Max. working height 240 mm
Min. working length 220 mm
Max. cutting depth 5 mm
Electrical Data
Supply voltage 400 V
Phase(s) 3 Ph
Current type AC
Mains frequency 50 Hz
Cutterblock
Type TERSA
Diameter 120 mm
Number of knives 4
Speed 5000 rpm
Max. planing width 520 mm
Feed
Speed 5/8/12/18 m/min
Location: Ex stock 54634 Bitburg
- Immediately Available -
Iklan kecil
Bitburg
11.321 km
Deduster
HolzkraftRLA 210 - sofort verfügbar
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, en_Holzkraft_RLA210_Dust_Extraction_Unit
Djdpfx Aishk Dfrerjuu
Iklan kecil
Bitburg
11.321 km
Multi-kombinasi
Holzkraft SCMCU 410 Elite S 32 Tersa
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Maximum configuration for professional users. Multi-function combination machine with TERSA cutterhead, mitre cutting device, and tilting spindle moulder.
Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved with the scoring saw blade installed.
Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside.
High-precision aluminium sliding table, anodised, running on hardened and riveted steel guide rails.
Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm.
Saw unit tiltable from 90° to -45°.
Tilting spindle moulder from 90° to -45° backwards into the fence.
Four spindle speeds.
Forward and reverse rotation of the spindle moulder.
Quick changeover to thicknesser thanks to parallel-opening jointer tables.
2-speed feed on the thicknessing table.
Helical-toothed steel infeed roller for consistent wood feed.
Three independent industrial motors.
Supplied with a separate rip fence and separate jointer fence.
Lockable main switch.
Equipment details:
Format fence
Instant control
Outrigger
Outrigger with angle-adjustable telescopic crosscut fence with degree scale.
Sliding table with ball contact system
Made of anodised aluminium.
Guides made of hardened and ground F550S steel, 15% harder than conventional steel.
Guides riveted, not glued.
Smooth-running, quiet and reliable.
10-year HOLZKRAFT warranty against wear on the hardened guideways.
Grey cast iron double-trunnion saw unit
Height adjustment via dovetail guide.
Extremely robust and torsion-resistant for precise cuts.
Mounted close to the saw blade, supported on both sides.
Height and tilt adjustable up to 45°.
Scoring unit with separate 0.55 kW motor as standard.
Double-trunnion moulder unit
Large, tilting double-trunnion spindle moulder unit made of grey cast iron.
Spindle fence
Heavy-duty professional design.
The high-quality spindle fence made of grey cast iron comes with fine adjustment as standard.
Three-way positionable for rapid return to preset settings.
Fine adjustment by means of rack-and-pinion, numerical display, and aluminium fence jaws.
Planer units
Helical-toothed steel infeed rollers for constant and uniform wood feed.
Heavy-duty anti-kickback devices prevent workpiece kickback.
4-knife Tersa cutterhead ensures an optimal finish.
Table lips for quieter operation.
Tersa planing knife shaft
No setting or screwing required.
Knife changes in seconds.
Self-locking.
Particularly quiet operation.
Thickness table
The thickness table is mounted on four large-dimension spindles, ensuring maximum stability under all working conditions.
Special lifting mechanism keeps the table position stable even without locking.
Parallel fence
With fine adjustment and quick clamping.
Robust round bar guide made of ground steel.
Exchangeable aluminium rule.
No measuring gap; guide rods overlap.
Separate jointer fence
Large professional design (1800 x 150 mm), tiltable 0-45°.
Quick adjustment.
Robust round bar guide made of ground steel.
Simultaneous opening
Model No. 5500557
Dusdpfxjcnxa Sj Aireu
Iklan kecil
Bitburg
11.321 km
Gergaji meja geser
Holzkraft / SCMSI 4 - 400 / 32 MA
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Format Circular Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A
With tiltable saw blade and anodized aluminum sliding table
Article number: 5504933
Brand: Holzkraft
TECHNICAL DATA
Dimensions and Weights
Weight (net) approx.: 690 kg
Extraction Connection
Extraction port diameter: 120 mm
Extraction port diameter (saw blade guard): 80 mm
Electrical Data
Connection voltage: 400 V
Mains frequency: 50 Hz
Scoring motor power: 0.65 kW
Output power (main motor): 7.0 kW
Duty type (main drive motor): S6
Duty cycle (main drive motor): 40%
Sliding Table and Work Table
Sliding table length: 3200 mm
Sliding table width: 360 mm
Sliding table height: 175 mm
Table length: 1000 mm
Table width: 560 mm
Table height: 900 mm
Saw Unit
Cutting width with rip fence: 900 mm
Max. cross-cut width left of saw blade: 3200 mm
Edging length: 3200 mm
Saw blade tilt: 90° - 46°
Max. cutting height at 90°: 136 mm
Max. cutting height at 45°: 97 mm
Max. cutting height note: Independent from scorer blade
Saw blade diameter: 400 mm
Saw blade diameter note: Independent from scorer blade
Saw blade speed: 3500/5000 rpm
Scoring Unit
Scoring saw blade diameter: 120 mm
Scoring saw blade speed: 9200 rpm
EQUIPMENT
Equipment Details
Scoring unit with separate motor
Anodized aluminum sliding table
Handle for sliding table
On/Off switch on sliding table for main and scoring saw blade motors
Squaring frame
Material roller on squaring frame
Rip fence with round bar guide
Stops: two professional folding stops
Edging shoe
Eccentric clamp
Table extension
Dsdpjxw N N Hofx Airjuu
Table widening
Saw blade oscillation guard
Motorized height adjustment and tilting of the saw unit, digital display for tilt
Location: ex stock 54634 Bitburg
- immediately available -
Iklan kecil
Bitburg
11.321 km
Abricht-ketebalan Planer dikombinasikan
SCM / Holzkraft Sofort verfügbarMinimax FS 52 es Tersa digital
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Description
Technical Data
Scope of Delivery
Accessories
Optional Equipment
Ideal for demanding craftsmen and cabinetmakers
The especially long, one-piece jointer tables allow for easy straightening of workpieces
Work tables are made from cast iron, making them resistant and permanently flat
Rearward, simultaneously opening jointer tables with spring-assisted support for quick and convenient conversion
Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose during machine conversion, saving valuable working time
Helically toothed steel infeed roller ensures a constant and uniform material feed
Rubber outfeed roller at the end of the thickness planer guarantees even wood extraction
Material feed with four speeds
Planer thickness table adjustment via handwheel with integrated height display
DIGITAL version: with electric thickness table height adjustment and digital display
On/off switches positioned for operator convenience
Dujdpfx Aioff Hdpjreu
Powerful industrial motor
The high machine weight ensures maximum precision and smooth operation
Prepared for mortising unit installation
Quality Made in Italy
Dimensions and Weights
Length approx. 2250 mm
Width/Depth approx. 1370 mm
Weight approx. 695 kg
Jointer
Total table length: 2250 mm
Maximum cutting depth: 5 mm
Fence length: 1200 mm
Fence height: 150 mm
Dust Extraction Connection
Thicknesser extraction port diameter: 1 x 120 mm
Drive Power
Main motor: 7 kW
Installation Information
Required length: 2250 mm
Required width/depth: 1440 mm
Explanation on space requirements: Dimensions take into account maximum travel distances or working lengths.
Thicknesser
Thickness table length: 850 mm
Thickness table width: 520 mm
Working height min.: 3 mm
Working height max.: 240 mm
Working length min.: 220 mm
Maximum cutting depth: 5 mm
Electrical Data
Connection voltage: 400 V
Phases: 3 Ph
Current type: AC
Line frequency: 50 Hz
Cutterhead
Type: TERSA
Diameter: 120 mm
Number of knives: 4 pcs
Speed: 5000 rpm
Maximum planing width: 520 mm
Feed
Speed: 5/8/12/18 m/min
Iklan kecil
Bitburg
11.321 km
Sistem ekstraksi / sistem udara mentah seluler
HolzkraftASA 2803
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, en-GB: Chip Extraction Unit
ASA 2803
Mobile, with 180° rotatable extraction unit
For chips from milling, planing, and sawing operations (not suitable for dust)
180° rotatable extraction unit allows extraction from above or below
Robust metal impeller
Supplied as standard with a premium chassis for improved stability and easy manoeuvring
Quick-release fasteners for filter and chip collection bags
Fine filter bag with double weave
Dimensions and Weights
Chip collection volume: 2 x 120 l
External diameter of extraction inlet: 203 mm
External diameter of extraction outlet: 1 x 100 mm, 2 x 120 mm
Length approx.: 1,500 mm
Width/Depth approx.: 500 mm
Height approx.: 2,100 mm
Weight approx.: 53 kg
Electrical Data
No-load speed: 2,950 rpm
Power consumption: 2.2 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Filter
Filter surface area: 2 x 1.92 m²
Noise Emission
Max. sound pressure level: 87.5 dB(A)
Air Flow Rate
Nominal air flow: 2,800 m³/h
Dedpfx Ajhk S Sdeirsuu
Maximum negative pressure: 1,900 Pa
Scope of Delivery:
Two filter bags, two chip collection bags
Location: ex-stock 54634 Bitburg
- immediately available -
Iklan kecil
Bitburg
11.321 km
Gergaji - Pemotong Gabungan
Holzkraft / SCMST 3 Classic 23 - sofort verfügbar -
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, ST 3 classic F 23 - Combined Saw-Spindle Moulder Machine
Features:
- With tilting saw blade, tilting spindle moulder, and sliding table made of anodised aluminium
- Robust steel and cast iron construction
- Large support surface and precision-cast iron table
- High-precision sliding table made of anodised aluminium (slide travel 2250 mm)
- Large outfeed table (900 x 600 mm) with extendable aluminium telescopic fence
- Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°-45°
- Saw rip fence with fine adjustment
- Stable saw unit and large double-trunnion spindle moulder assembly ensure maximum stability, precision, smooth running, and long service life
- Solid and precise machine table made from stress-relieved cast iron
- Three spindle speeds, manually adjustable from 3,500 - 10,000 rpm
- Spindle with forward and reverse rotation
- Standard spindle moulder guard
- Two 5.0 kW motors with ample power reserves
Cast iron spindle moulder unit:
- Secured on both sides at the top
- Precision ball bearings at the top
- Close to the lever point
- Four optimally graduated spindle speeds enable workpiece sharpening
Powerful motors:
- Industrial motors suitable for continuous operation (100% duty cycle at full load)
Dusdpfjcnwydjx Airou
Scope of delivery:
- Spindle moulder guard
- Anodised aluminium sliding table
- Aluminium fence jaws
- Flip stops
Technical data:
- Dimensions cast iron work table: 1112 x 430 mm
- Crosscutting length: 2250 mm
- Max. saw blade diameter with/without scoring: 315 mm
- Max. cutting height at 90°/45°: 100/70 mm
- Max. crosscut width: 2660 mm
- Saw blade tilt: 90° - 45°
- Cutting width: 900 mm
- Speed: 4000 rpm
- Spindle moulder: -
- Spindle tilt: 90° - 45°
- Useful spindle length: 100 mm
- Max. tool diameter: 210 mm
- Max. tenon tool diameter: 275 mm
- Max. retractable tool diameter: 180 mm
- Speeds: 3,500/7,000/10,000 rpm
- General: -
- Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP)
- Weight: 470 kg
- Extraction port diameter: 2 x 120 mm
- Extraction port diameter (blade guard): 60 mm
Location: In stock at 54634 Bitburg
- Available immediately -
Iklan kecil
Bitburg
11.321 km
Panjang belt sander
HolzkraftLBSM 2505 ESE
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Rugged construction allows for machining of longer workpieces
Grinding unit can be swiveled, making it suitable for use as an edge sanding machine
Balanced 225 mm belt pulleys ensure low-vibration operation
Easy sanding belt adjustment
High belt speed of 17 m/s
Reversible belt direction (right/left run)
Top sanding shoe with graphite coating
4-way spring-loaded sanding shoe
Includes movable sanding shoe for angled-edge surfaces
Smooth-running sanding table even under heavy loads from large workpieces
Optimal price-performance ratio
Additional ESE Equipment
Standard with electric table height adjustment
Split table that folds up for special edge sanding applications
Drawer sanding device
Integrated worktable lighting
Equipment Details
Large, balanced 225 mm belt pulleys ensure optimal and low-vibration drive
Belt speed: 17 m/s
Swiveling professional sanding shoe for inclined surfaces
4-way spring loaded
Standard with electric table height adjustment
Ergonomically positioned controls on a separate control panel
Standard drawer sanding device
Split table folds up for special edge sanding applications
Djdpfxjff Hdfe Aireuu
Dimensions and Weights
Length approx. 3,750 mm
Width/depth approx. 1,250 mm
Height approx. 1,730 mm
Weight approx. 520 kg
Dust Extraction
Extraction nozzle diameter: 160 / 160 mm
Worktable(s)
Table height adjustment: 550 mm
Lateral table travel: 690 mm
Electrical Data
Table height adjustment motor power: 0.37 kW
Drive motor power: 3.0 kW
Supply voltage: 400 V
Phases: 3 Ph
Current type: AC
Mains frequency: 50 Hz
Grinding Unit
Sanding belt length: 7,000 mm
Sanding belt width: 150 mm
Belt speed: 17 m/s
Sanding shoe length: 270 mm
Sanding shoe width: 150 mm
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Bitburg
11.321 km
Sikat pengamplasan dan mesin texturing
HolzkraftSTR 32r
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Designed for professional structuring and sanding operations
Motorized height adjustment of the working units with digital display
Units can be activated individually
Highly durable rubberized feed belt
Variable feed speed
Constant infeed height
STR L models with infinitely variable, inverter-controlled brush speed: This allows precise adjustment of the brush speed to the material, making it especially suitable for sensitive materials.
Unit for saw-cut finish optionally available
- Motorized height adjustment of the units
- Units can be switched on individually
- Feed speed steplessly adjustable
Dimensions and weights
Length approx. 1300 mm
Width/depth approx. 1000 mm
Height approx. 1300 mm
Weight approx. 440 kg
Dust extraction connection
Extraction nozzle diameter: 2 x 150 mm
Brushes
Diameter: 190 mm
Length: 300 mm
Speed: 1500 rpm
Electrical data
Drive motor power: 2 x 3.0 kW
Feed motor power: 0.22 kW
Connected load: 6.25 kW
Duedpfx Ajff Hdgeirou
Connection voltage: 400 V
Phase(s): 3 Ph
Current type: AC
Mains frequency: 50 Hz
Noise emission
Sound power level Lw (idle without extraction): 65 dB(A)
Sanding unit
Max. sanding width: 300 mm
Feed unit
Feed speed: 1 – 13 m/min
Workpiece
Max. height: 300 mm
Max. weight: 100 kg
Iklan kecil
Bitburg
11.321 km
Kombinasi planer permukaan dan ketebalan
SCM / HolzkraftMinimax fs 52 es Tersa
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Beschreibung
Technische Daten
Lieferumfang
Zubehör
Ausstattungsoptionen
Ideal for demanding craftsmen and joiners
The especially long, one-piece surfacing tables enable easy jointing of workpieces
Work tables are made of cast iron, making them robust and permanently flat
Rearward, simultaneously opening surfacing tables with spring assistance for fast and convenient conversion
Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time
Helically-toothed steel infeed roller ensures constant and even wood feed
Rubber outfeed roller at the thicknessing table exit ensures uniform wood outfeed
Material feed with four speeds
Thicknessing table adjustment via handwheel with integrated planing height display
On/off switch in operator position
Powerful industrial motor
The high machine weight ensures maximum precision and smooth operation
Prepared for slot mortising device
Quality Made in Italy
Dimensions and Weights
Length approx. 2250 mm
Width/Depth approx. 1370 mm
Weight approx. 695 kg
Surfacing
Total length of tables: 2250 mm
Maximum depth of cut: 5 mm
Fence length: 1200 mm
Fence height: 150 mm
Dust extraction connection
Thicknessing extraction port diameter: 1 x 120 mm
Drive power
Main motor: 7 kW
Installation Information
Required space – Length: 2250 mm
Duedpfxoff Hdms Airsu
Required space – Width/Depth: 1440 mm
Space requirement explanation: Dimensions take into account maximum travel distances or usable lengths.
Thicknessing
Thicknessing table length: 520 mm
Thicknessing table width: 850 mm
Minimum working height: 3 mm
Maximum working height: 240 mm
Minimum working length: 220 mm
Maximum depth of cut: 5 mm
Electrical Data
Connection voltage: 400 V
Phase(s): 3 Ph
Current type: AC
Mains frequency: 50 Hz
Cutterblock
Type: TERSA
Diameter: 120 mm
Number of knives: 4 pcs
Speed: 5000 rpm
Maximum planing width: 520 mm
Feed
Speed: 5/8/12/18 m/min
Iklan kecil
Bitburg
11.321 km
Sistem ekstraksi seluler / sistem udara mentah
HolzkraftASA 203
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Raw Air Extraction Unit
ASA 203
With Standard Chassis
Dimensions and Weights
Chip Collection Capacity: 175 l
Nominal Diameter (Outer) of Suction Nozzle (Inlet): 200 mm
Length approx.: 1061 mm
Width/Depth approx.: 577 mm
Height approx.: 2300 mm
Weight approx.: 60 kg
Electrical Data
Connection Voltage: 400 V
Mains Frequency: 50 Hz
Filter
Filter Surface Area: 2.2 m²
Noise Emission
Duedpfxjhk S Sze Airsu
Maximum Sound Pressure Level: 84 dB(A)
Air Flow Rate
Nominal Airflow: 2500 m³/h
Suitable for milling, planing, and saw chips (not dust)
Significantly reduced residual dust content due to BIA-certified filter material with high separation efficiency
Housing components and impellers made from high-strength special plastic
Quick-release fasteners for filter and chip bags enable trouble-free maintenance
Sturdy, premium-grade construction
Easy to move thanks to swivel castors
Low energy consumption
Extraction units comply with dust class L
Scope of Delivery:
System body with mounted fan unit
Filter bag / extraction unit
Chip bag / extraction unit
Without extraction hose
Iklan kecil
Bitburg
11.321 km
PLANER BANGKU
HolzkraftHB 2007
Hubungi
Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Professional workbenches
Precise and meticulous craftsmanship
Constructed entirely from steamed, solid beech
All critical edges are rounded
Dodec Uydaspfx Airouu
Eco-friendly, oiled surfaces
Standard with tool drawer
Both vise guide rods are precisely and stably guided in a cast iron housing
Equipped with a smooth-action trapezoidal threaded spindle
Features a French front vise and German-style tail vise with linear guide, two short round bench dogs, two long round bench dogs, drawer, and side compartment
Finger-jointing in the tail vise and rear of the side compartment
Length of working surface without vises: 1915 mm
Width/depth of working surface without vises: 615 mm
Working height: 870 mm
Front vise length: 520 mm
Tail vise length: 450 mm
Front vise width: 70 mm
Tail vise width: 140 mm
Front vise clamping capacity: 190 mm
Tail vise clamping capacity: 180 mm
Front vise clamping capacity to center of round dog: 225 mm
Tail vise clamping capacity to center of round dog: 265 mm
Workbench top thickness: 50 mm
Overall length (product): 2120 mm
Overall width/depth (product): 790 mm
Overall height (product): 870 mm
Weight (net): 91 kg
Location: In stock at 54634 Bitburg
Kami memudahkan pencarian untuk Anda: "holzkraft sc 2"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Holzkraft Sc 2 (177)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
























































































































