Beli Holzkraft Hs 10 1350 Eco bekas (199)

Kondisi: baru, Tahun pembuatan: 2026, Small-format panel saw with tilting saw blade and high-quality aluminum sliding table. Cutting plane of the small-format panel saw located directly at the rolling table. Precision-guided sliding table made of aluminum, standard anodized finish. Large format table extension guided on telescopic arm and longitudinally adjustable. Standard table extension and width extension allow for easy handling of larger workpieces. The large-sized saw unit made of cast iron is doubly mounted to the cast table, guaranteeing stability, precision, smooth operation, and long service life. Large worktable made of ground cast iron—extremely robust and resistant. Smooth operation and precise cuts. Aluminum sliding table. Equipped with a proven ball-contact system used millions of times. Dust- and dirt-resistant due to minimal contact point between the ball and trapezoidal rail. 10-year HOLZKRAFT warranty on the wear of hardened guide rails. Telescopic stop. Extendable aluminum telescopic stop. Angle adjustable. Includes two professional folding stops. Bwjdpfx Abecnxamshjh Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: - Table extension - Table width extension - Anodized aluminum sliding table - Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical Data - Table dimensions: 1020 x 325 mm - Table height: 900 mm - Cross-cutting length: 1660 mm - Max. cutting height at 90° with scorer: 100 mm - Max. cutting height at 45° with scorer: 79 mm - Max. cross-cut width left of saw blade: 1270 mm - Cutting width with parallel fence: 900 mm - Saw blade tilt: 90° - 45° - Max. saw blade diameter with scorer: 315 mm - Max. saw blade diameter without scorer: 315 mm - Scoring saw blade diameter (option): 80 mm - Main saw blade speed: 4000 rpm - Scoring saw blade speed: 7600 rpm - Electrical connection: 400 V / 50 Hz - Motor power: 4.0 kW - Extraction port diameter: 120 mm - Extraction port diameter, blade guard: 60 mm - Weight: 295 kg Location: In stock at 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Raw Air Extraction Unit ASA 163 With standard chassis Dimensions and Weights Chip collection volume: 175 l Outer nominal diameter of suction inlet: 160 mm Length approx.: 1096 mm Width/depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Maximum sound pressure level: 83 dB(A) Airflow Rate Rated airflow: 2200 m³/h For chips from milling, planing, and sawing (not suitable for dust) Significantly reduced dust content due to BIA-tested filter material with a high separation efficiency Housing parts and impellers made from high-strength special plastic Quick-release fasteners for filters and chip bags ensure easy maintenance Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Bwedohk S S Eepfx Abheh Extraction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Suction hose not included

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Bwjdehp Rcrepfx Abheh Max. milling tool diameter Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, en Bwjdpfx Abodqzh Tohoh

Kondisi: baru, Tahun pembuatan: 2026, Bandschnellspannung via lever Upper belt guide with graphite coating 250 mm dynamically balanced band wheels ensure optimal drive. With electric height adjustment With extraction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces via pivoting sanding shoe Beveled edges Standard with right and left rotation The quick belt tensioning allows fast and trouble-free changing of sanding belts. Supplied partially assembled Dimensions and Weights Bsdpfxoff Hdbe Abhswh Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust Extraction Connection Extraction port diameter: 2 x 140 mm Work Table(s) Work table height adjustment: 620 mm Max. working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt running speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height, workpiece longer than work table: 180 mm Explanation regarding max. height, workpiece longer than work table: Machining of workpieces with protrusion over the right side of the work table is possible.

Kondisi: baru, Tahun pembuatan: 2025, Designed for professional structuring and sanding tasks Motorized height adjustment of the working units with digital display Bwedpfx Ajff Hdisbheh Units can be individually engaged Highly durable rubberized conveyor belt Infinitely variable feed speed Consistent infeed height STR L models feature infinitely adjustable, inverter-controlled brush speed: this enables precise adaptation of the speed to the material, making it especially suitable for sensitive materials. Optional unit for saw-cut finish available Dimensions and Weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction port diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Rotation: 1500 min⁻¹ Electrical Data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Total connected load: 6.25 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Noise Emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg

Kondisi: baru, Tahun pembuatan: 2026, en-GB_Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional model with quick-release blade tensioning system for professional users Article number: 5150063 DESCRIPTION Heavy-duty professional design with high own weight for maximum smooth running Particularly smooth and precise operation thanks to the torsion-resistant machine housing Large, one-piece cast iron table, tiltable from 0° to +45° with ground and polished surface Patented table tilting device with handwheel and rack Quick-release blade tensioning system Precision bandsaw blade roller guides Fast and precise adjustment of cutting height via handwheel and rack with millimetre scale Safety switch for automatic shut-off when the door is opened Large cast parallel fence Supplied with mitre gauge as standard Table tilting via rack and handwheel TECHNICAL DATA Dimensions and Weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction Connection Extraction port diameter 2 x 120mm Work Table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table tilt 0 – 45° Explanation work table tilt: For safety reasons, from 20° an additional holding device/stop must be installed to prevent wood from slipping! Electrical Data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting Capacities Max. cutting height at 90° 400mm Max. cutting width with fence 570mm Max. cutting width without fence 610mm Bandsaw Blade Blade speed(s) 1615m/min Flywheel diameter 630mm Blade length 4600mm Blade guide Precision-guided top and bottom Bsdpevk Sfbofx Abhjwh Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Holzkraft edge sanding machine Model: KSO 200 F with veneer sanding device Sanding unit tiltable up to 45° via lever Bjdpfxslht H Ns Abhswh The welded steel machine base ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as required Sanding surface with graphite coating for longer belt life Height-adjustable sanding table for use of the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length differences With dual dust extraction Extendable roller table extension With rubber-coated sanding roller Veneered edge sanding device with contact shoe with fine adjustment, pressure relief rollers, and positioning rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Drive motor power 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Designed for wood chips and wood dust. Engineered for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in its class Very quiet operation Application Area Clean air extraction systems for wood chips and wood dust Specifically designed for commercial environments Suitable for all woodworking machines with a matching extraction port diameter Can also be used for multiple dust sources High-quality, well-thought-out construction Rugged and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, ensuring versatile use Large inspection openings Large-capacity, mobile chip containers with clamp lever and chip collection bag Unit comes fully assembled upon delivery, allowing for immediate use Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made from polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic version, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control box Fan positioned downstream of the filter Equipment Details: Featuring innovative locking mechanism for secure container positioning All units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³ Scope of Delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with brakes Manual cleaning Model RLA 160 Article No. 5131620 Technical Data Suction port diameter: 160 mm Nominal airflow: 1,448 m³/h Bwedpfx Abocnw T Isheh Maximum airflow: 2,400 m³/h Negative pressure at nominal airflow: 2,247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Surfacing and thickness planer Holzkraft FS 30 Classic Tersa with Tersa cutter block and planer blades - quick-change system The Tersa planer blade system enables blade changes within seconds and ensures especially quiet operation. Helical serrated steel feed roller for constant and uniform wood feed Extra-long surfacing tables Large surfacing fence can remain in position when opening the surfacing tables. Surfacing tables open to the rear High machine weight Powerful industrial motor Sturdy steel and cast iron construction Total table length: 1510 mm Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. depth of cut: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Bwsdpfebuldyjx Abhoh Scope of delivery: Tersa planer cutter block, anodized surfacing fence Available ex-stock Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° Rotatable Extraction Module For milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction module allows extraction guidance from below or above Robust metal impeller Standard high-quality undercarriage for enhanced stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 2 x 290 l Outer diameter, extraction inlet: 260 mm Outer diameter, extraction outlets: 3 x 120 mm, 1 x 100 mm Length approx.: 1900 mm Width/Depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data Bwedpfx Ajhk S Stobhoh No-load speed: 2950 min⁻¹ Rated power input: 4.8 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 5.98 m² Noise Emission Max. sound pressure level: 98.3 dB(A) Airflow Nominal airflow rate: 7700 m³/h Max. negative pressure: 2800 Pa Scope of delivery: Two filter bags, two chip bags Location: Ex stock 54634 Bitburg - available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, Raw Air Extraction Unit ASA 141 With standard chassis Dimensions and Weights Chip Collection Volume 175 l Nominal Diameter Extraction Port (inlet) 140 mm Length approx. 1062 mm Width/Depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical Data Supply Voltage 230 V Mains Frequency 50 Hz Filter Filter Surface Area 1.9 m² Noise Emission Max. Sound Pressure Level 78 dB(A) Bwodpfx Aohk S Swebhsh Airflow Nominal Airflow Rate 1650 m³/h For chips from milling, planing, and sawing (not suitable for dust) Significantly reduced dust content due to BIA-certified filter material with a high separation rate Housing components and impellers made from high-strength special plastic Quick-release fasteners for filter and chip bags enable easy maintenance Robust, high-quality construction Easy to maneuver thanks to swivel casters Low power consumption Extraction meets dust class L requirements Scope of Delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Kondisi: baru, Tahun pembuatan: 2025, Spindle moulder type: minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Article No.: 5502045 Brand: Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Net weight approx.: 290 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1000 mm Sliding table length: 1000 mm Work table width: 435 mm Sliding table width: 270 mm Table height: 900 mm Installation Information Space requirement (length): 1945 mm Machine body width/depth: 710 mm Space requirement (width/depth): 2220 mm Working area (length): 1600 mm Explanation of space requirement: Maximum travel range or effective lengths are considered in these dimensions. Working area (width/depth): 1600 mm Machine body length: 1000 mm Explanation of working area: Add the working area dimensions to the space requirement to determine the recommended free installation area for the machine. Bodpjhp Rcysfx Abhowh Electrical Data Supply voltage: 400 V Main drive motor power: 5.0 kW Mains frequency: 50 Hz Spindle Spindle tilt: 0 to -45° Spindle speeds: 3500/7000/10000 rpm Usable spindle length: 100 mm Spindle shaft diameter: 30 mm Maximum spindle projection above table: 130 mm Maximum Cutter Diameters Maximum tool diameter (retractable): 180 mm Maximum tenoning cutter diameter: 275 mm Maximum profile cutter diameter: 210 mm INCLUDED ACCESSORIES Curved workpiece guard Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Kondisi: baru, Tahun pembuatan: 2025, en Bsdpfxev Sk Nne Abhewh

Kondisi: baru, Tahun pembuatan: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and chips, designed for commercial use Article number: 5131400 Brand: Holzkraft DESCRIPTION Tested for dust according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision protection Area of Application Designed for commercial use For all woodworking machines with compatible extraction nozzle diameter High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction connector can be easily converted from left to right, offering flexible use Large service openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor delivered fully assembled, ready for immediate use All models are mobile For model RLA 210: Optimal chip distribution in the chip containers due to large filter area Filter Description Ultra-compact design with maximum filter area Filter material made of polyester fleece, aluminium-coated, ensuring long service life Filter anti-static version as standard, tested and approved according to category M-BIA Fan positioned downstream from filter TECHNICAL DATA Dimensions and Weights Product length approx. 1241 mm Product width/depth approx. 830 mm Product height approx. 1750 mm Net weight approx. 210 kg Chip collection volume: 165 l Extraction nozzle diameter (outer) inlet: 140 mm Axis height extraction nozzle to floor: 850 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Extraction motor efficiency class: IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Filter cleaning: manual Noise Emission Maximum sound pressure level: 71 dB(A) Airflow Volume Nominal air volume: 1108 m³/h Maximum air volume: 1750 m³/h SCOPE OF DELIVERY Metal impeller Service opening for cleaning bypass filter 5 m connection cable with five-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Manual cleaning Bwsdpev Sk Tmsfx Abhjh

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, minimax ti 55es LL - Spindle Moulder The image shows the T 55 i elite s standard version. The professional woodworking machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension cast iron spindle unit, tilting backwards up to -45°. Spindle speeds indicated by LEDs. Fast and simple speed change via eccentric clamping. Reversible spindle rotation (clockwise/counterclockwise). Height and tilt display with 0.1 mm accuracy. Heavy-duty professional fence: fine adjustment via rack-and-pinion, numerical display, aluminum fence jaws, 3-position adjustable for quick repeat settings. Scope of delivery: - Aluminum fence jaws - Curved milling guard - Table extension left and right Model: minimax ti 55es LL Item no.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table dimensions: -- Usable spindle length: 125 mm Max. tool diameter: 240 mm Bedpfx Abodqzh Rehowh Max. tool diameter (retractable): 230 mm Max. cutterhead diameter (tenoning): 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Kondisi: baru, Tahun pembuatan: 2026, en_Holzkraft_Minimax_ST_5es Bjdpfxed Hx Hmo Abhewh

Kondisi: baru, Tahun pembuatan: 2025, 4-knife cutterblock for optimum planing results Smooth operation due to precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal material feed Satin-finished steel outfeed roller, optionally available with rubber-coated roller The working table is mounted on four oversized columns, guaranteeing maximum stability under all working conditions. Thickness table adjustment via handwheel with numeric display for set planing height (accurate to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator's side Powerful industrial motor Robust steel and cast iron construction Equipment details: Working table Mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions Special lifting mechanism keeps the table position securely in place even without locking Tersa cutterblock No more adjusting or screwing Cutter change in seconds Self-locking Extremely quiet operation Thickness table adjustment on S 41 elite s Via handwheel with numeric display for set planing height (accurate to 0.1 mm) Dimensions and weights Length approx. 900 mm Width/depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Extraction port diameter for thicknessing: 120 mm Bwodpfx Ajd Hx Hnobhoh Drive power Main motor: 5 kW Installation information Required space length: 1070 mm Required space width/depth: 900 mm Required space height: 1100 mm Note on space requirement: Dimensions take into account maximum axis travels or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Note on working area: Please add the specified values to the required space to obtain the recommended free installation area for the machine. Thicknessing table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Working height min.: 3 mm Working height max.: 240 mm Working length min.: 180 mm Maximum cutting depth: 5 mm Electrical data Connection voltage: 400 V Cutterblock Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 410 mm Feed Feed speed: 6/12 m/min

Kondisi: baru, Tahun pembuatan: 2026, en-Holzkraft sliding table saw with scoring unit Compact sliding table saw with tiltable saw blade and high-quality anodized aluminum sliding table Cutting area of the compact sliding table saw is located directly at the rolling table Precision-guided sliding table made of aluminum, anodized as standard Large-format table extension on telescopic arm, adjustable lengthwise Standard table extension and width extension allow easy handling of larger workpieces The large dimensioned saw assembly made of cast iron is mounted twice to the cast base and guarantees stability, precision, smooth running, and long service life Large working table made of ground cast iron, extremely robust and resistant Smooth operation and precise cuts Aluminum sliding table Tested and proven ball contact system—millions in use Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic fence Extendable aluminum telescopic fence Angle adjustable With two professional folding stops Ek2a0i2ik Parallel fence Standard with fine adjustment and quick release Scope of delivery: Table extension Table width extension Anodized aluminum sliding table Parallel fence with round bar guidance and fine adjustment Model SC 2 classic Item No. 5504215 Bsdpfjih Dwvjx Abhswh Technical Data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut capacity: 1660 mm Maximum cutting height at 90° with scorer: 100 mm Maximum cutting height at 45° with scorer: 79 mm Maximum crosscut width left of saw blade: 1270 mm Rip width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scorer: 315 mm Saw blade diameter max. without scorer: 315 mm Scoring blade diameter (optional): 80 mm Main saw blade speed: 4000 rpm Scoring saw blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction nozzle diameter: 120 mm Extraction nozzle diameter on saw blade protector: 60 mm Weight: 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 by Holzkraft For wood dust and shavings, designed for commercial use Item No.: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outer Diameter Extraction Connection (inlet): 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Air Volume Flow Rated Airflow: 1448 m³/h Dust Class: H3 Scope of Delivery: - Metal impeller - Service opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed castors and two swivel castors with locking brakes - Manual filter cleaning Bwodpfxehkzttj Abhoh Item No. 5131620 Location: In stock, 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2025, Four-knife cutterblock for optimal planing results Smooth operation thanks to a precision unit and heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed Satin-finished steel outfeed roller, optionally with rubber-coated outfeed roller The work table is supported on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment via handwheel, with numeric indicator for set planing height (precise to 0.1 mm) Standard with two feed speeds, comfortably selectable from the operator side High-performance industrial motor Robust steel and cast iron construction Equipment Details: Work Table Mounted on four large-dimensioned spindles to guarantee utmost stability in all working conditions Special lifting mechanism ensures the table position remains accurate even without locking Tersa Planer Cutterblock No more setting or screwing Planer knives can be changed within seconds Self-locking Motorized Thickness Table Adjustment on S 52 elite s Thickness table height is motorized with electronic decimal display For increased precision and operator convenience Dimensions and Weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust Extraction Connection Thickness extraction port diameter: 120 mm Drive Power Main motor: 7 kW Bjdpfx Abod Hx Hpehswh Installation Information Required space length: 1440 mm Required space width/depth: 1071 mm Required space height: 1088 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1030 mm Machine body width/depth: 998 mm Length: 1000 mm Width: 1800 mm Work area explanation: Please add the given measurements to the required space to get the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. material removal: 5 mm Electrical Data Connection voltage: 400 V Planer Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Feed speed: 5/8/12/18 m/min

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Combination machine 4-way HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Bwjdpfx Ajci Tvhebhjh Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of the saw blade: 2,310 mm Cutting width at parallel fence: 820 mm Saw blade tilting: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutterhead diameter / Number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter saw blade guard: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Kondisi: baru, en-001 Bodpfx Abjr A Eq Rehewh

Kondisi: baru, Planer Thicknesser HOLZKRAFT fs 52es digital TERSA - Showroom Machine - TERSA Cutterblock, electric height adjustment, digital readout for planing thickness ----- Technical Data ----- Planing width: 520 mm Thicknessing table size: 850 x 520 mm Table length: 2,250 mm Max. cutting depth: 5 mm Cutterblock diameter: 120 mm Number of knives: 4 Passage height: 240 mm Min. workpiece thickness: 3 mm Feed speed: 5 / 8 / 12 / 18 m/min Cutterblock speed: 5,000 rpm Extraction nozzle diameter: 120 mm Motor power 400 V: 9.5 HP / 7.0 kW Weight: 695 kg - new showroom machine - Bsdpfx Abju R Sztshewh

Kondisi: baru, Feed Unit VSA 2048 L Holzkraft - Demonstration Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed settings: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum outreach: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and Weights: Bjdjwfhg Nepfx Abhowh - Length (product) approx.: 1665 mm - Width/Depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Weight (net) approx.: 73.5 kg - Weight notes (net) approx.: including stand Electrical Data: - Drive motor power: 0.75 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - new demonstration machine -