Beli Holzkraft Sc 2 bekas (176)

Kondisi: bekas, Tahun pembuatan: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from the outside, equipped with separate drive motor - Sliding table made from anodised aluminium with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from initial commissioning) - Rip fence with round bar guide; foldable for large panels, quick-clamping mechanism and integrated fine adjustment - Table extension - Table width extension - Integrated on/off switch on sliding table - Motorised height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and rip fence position - Pivoting control panel at eye level - Quality made in Italy - Cutting length: 3200 mm - Cutting height at 90°/45° with scorer max.: 136.5/97 mm - Cross-cut width left of saw blade max.: 3260 mm - Rip capacity with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm Lhjdpfx Agjx Hbrus Rjd - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scorer motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short notice Location: Röllbach

Kondisi: bekas, Spaltkraft5TonnenHolzkraftElectricSplitter Lsdpfxjwxc Dio Ag Rehd

Kondisi: baru, Tahun pembuatan: 2026, Format Circular Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tiltable saw blade and anodized aluminum sliding table Article number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net) approx.: 690 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 80 mm Lhsdpfx Agjxw N N Ho Rod Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Duty type (main drive motor): S6 Duty cycle (main drive motor): 40% Sliding Table and Work Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. cross-cut width left of saw blade: 3200 mm Edging length: 3200 mm Saw blade tilt: 90° - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height note: Independent from scorer blade Saw blade diameter: 400 mm Saw blade diameter note: Independent from scorer blade Saw blade speed: 3500/5000 rpm Scoring Unit Scoring saw blade diameter: 120 mm Scoring saw blade speed: 9200 rpm EQUIPMENT Equipment Details Scoring unit with separate motor Anodized aluminum sliding table Handle for sliding table On/Off switch on sliding table for main and scoring saw blade motors Squaring frame Material roller on squaring frame Rip fence with round bar guide Stops: two professional folding stops Edging shoe Eccentric clamp Table extension Table widening Saw blade oscillation guard Motorized height adjustment and tilting of the saw unit, digital display for tilt Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, en Lhsdpfxsxw N Sbs Ag Red

Kondisi: bekas, Tahun pembuatan: 2012, perangkat penghisap bekasTahun pembuatan: 2012Kapasitas nominal: 2789 m³/jamLuas filter: 1,8 m²Tekanan negatif maks.: 1668 PaVolume penampung serpihan: 160 lMotor: 1,1 kW, 400 VStutzen penghisap: 1 x 120 mm, 1 x 100 mmKetersediaan: segeraLokasi gudang: Hochheim Lhodpex Rv Dtefx Ag Rod

Kondisi: baru, Robust craftsman’s machine with spindle moulder tiltable ±45° and MK 4 interchangeable spindle - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Especially robust design - Smooth operation thanks to precision components and high dead weight - Standard with forward/reverse rotation and electronic lock when changing direction - Five speeds from 3,000 – 10,000 rpm - Speed change is simple and convenient from the machine side - Standard with MK 4 interchangeable spindle system - Large cast-iron worktable for long-lasting accuracy - Easy operation via controls and speed display on the front of the machine - Large professional milling fence with fine adjustment and aluminium fence jaws as standard - Fence adjustment via handwheel with numeric display - Numeric display of spindle height, accurate to a tenth - High-performance industrial motors Scope of delivery: Technical data: Dimensions and weights: Net weight: approx. 510 kg _____ Extraction ports: Port diameter at fence: 1 x 120 mm Port diameter at machine: 2 x 80 mm _____ Worktable: Table length: 2,500 mm Table width: 810 mm Table height: 923 mm _____ Installation information: Space requirement: Dimensions take into account maximum traverse paths or usable lengths. Working area length: 3,700 mm Working area width/depth: 5,000 mm Note on working area: Please add the figures given to the space requirement to obtain the recommended free installation area for the machine. _____ Equipment: Milling fence: Heavy-duty professional design with aluminium fence jaws and fine adjustment, adjustment from the front via handwheel with numeric digital display Curved milling safety hood: YES Spindle height adjustment: manual Spindle tilting adjustment: manual Control: manual height and tilt adjustment of the milling unit Position of controls: on machine body Table design: table extension left and right and extendable workpiece support (total width 2,500 mm) _____ Electrical data: Connect voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW _____ Milling spindle: Spindle tilt: -45 to +45° Usable spindle length: 140 / 180 mm Note on usable spindle length: for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm Ljdpfjxnqx Rjx Ag Rshd Milling spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speed(s): 3,000/4,500/6,000/8,000/10,000 rpm _____ Maximum milling tool diameters: Max. tool diameter, retractable: 320 x 60 mm Max. tool diameter, profile milling: 250 mm Max. tool diameter, tenoning: 350 mm Max. tool diameter, contour milling: 160 mm

Kondisi: baru, With 520 mm planing width, motorized thickness table adjustment, and comfort switching Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron Smooth operation due to high machine weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure bar at infeed Precision-mounted four-knife cutterblock Helical steel infeed roller for particularly uniform and gentle wood feed Rubber-coated outfeed roller Large jointer fence, tiltable from 90° to +45° Comes standard with auxiliary fence Powerful industrial motor Pneumatic quick-change system with pneumatic lifting and lowering of the surfacing table Extraction connection remains in the same position during both surfacing and thicknessing, eliminating the need for additional hoses or awkward repositioning around the machine Scope of supply: Technical Data: Dimensions and Weights: Length (product): approx. 2300 mm Lsdpfoxnqyhex Ag Rshd Width/depth (product): approx. 1100 mm Weight (net): approx. 980 kg _____ Surfacing: Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. planing depth (surfacing): 6 mm Planer fence length: 1200 mm Planer fence height: 190 mm Planer fence tilt range: 90 – 45° _____ Extraction connection: Extraction port diameter (thicknessing): 120 mm _____ Installation Information: Required space length: 2300 mm Required space width/depth: 1610 mm Space requirement explanation: dimensions account for maximum travel or usable lengths Machine body length: 1235 mm Machine body width/depth: 850 mm Working area length: 1000 mm Working area width/depth: 3500 mm Working area note: please add specified working area dimensions to required space for recommended free installation area _____ Thickness Planing: Min. working height: 3.5 mm Max. working height: 250 mm Max. planing depth (thickness): 8 mm _____ Electrical Data: Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz _____ Cutterblock: Type: TERSA Cutterblock diameter: 120 mm Number of knives: 4 pcs Cutterblock speed: 5000 rpm Max. planing width: 520 mm _____ Feed: Feed speed: 5/8/12/18 m/min

Kondisi: baru, Ideal for demanding craftsmen and joiners. Lhjdsvwflbepfx Ag Rod The extra-long, one-piece surfacing tables allow for easy straightening of workpieces. The work tables are made of cast iron, ensuring high durability and permanent flatness. Rearward, simultaneous opening surfacing tables with tension spring support enable quick and convenient changeover. Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during changeover, saving valuable working time. The helical-toothed steel infeed roller ensures constant and uniform wood feed. Rubber outfeed roller at the thicknesser exit ensures even wood removal. Material feed with four speeds. Thicknesser table adjustment via handwheel with integrated height gauge. DIGITAL version: with electric height adjustment for the thicknesser table and digital display. On/off switch in operator position. Powerful industrial motor. High machine weight ensures maximum precision and smooth running. Pre-equipped for slot mortising attachment. Quality made in Italy. TECHNICAL DATA Dimensions and Weight Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Net Weight: approx. 695 kg Surfacing Total table length: 2250 mm Max. planing depth (surfacing): 5 mm Planer fence length: 1200 mm Planer fence height: 150 mm Extraction Connection Extraction port diameter thicknesser: 1 x 120 mm Installation Information Required Length: 2250 mm Required Width/Depth: 1440 mm Note: Dimensions consider maximum travel paths or usable lengths. Thicknesser Thicknessing table length: 520 mm Thicknessing table width: 850 mm Minimum working height: 3 mm Maximum working height: 240 mm Minimum working length: 220 mm Max. planing depth (thicknesser): 5 mm Electrical Data Main drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterblock Type: TERSA Cutterblock diameter: 120 mm Number of knives: 4 pcs Cutterblock speed: 5000 rpm Max. planing width: 520 mm Feed Feed speed: 5/8/12/18 m/min SCOPE OF DELIVERY Surfacing fence with round bar guide 4 feed speeds Tersa cutterblock Manufacturer no. 5503501

Kondisi: baru, Technical Data: Dimensions and Weights Working height: 850 – 1150 mm Log cradle support: 735 mm Length approx.: 1270 mm Width/depth approx.: 730 mm Height approx.: 1130 mm Weight approx.: 121.5 kg Ledevwfxhepfx Ag Rjhd Drive Type of drive: Electric motor with direct drive Electrical Data Power input: 7.5 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Network frequency: 50 Hz Saw Blade Diameter: 700 mm Cutting Capacity Cradle round timber: 240 mm Cradle cross cut: 250 mm Cradle split wood: 370 x 240 mm

Kondisi: baru, - new - with swiveling sanding unit and oscillating sanding belt, F-version for veneer sanding Description: - Sanding unit swivels up to 45° via lever - Machine frame made of welded steel ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for improved sanding results - Oscillation can be switched on as required - Graphite-coated sanding shoe for longer sanding belt life - Height-adjustable sanding table for full use of sanding belt width - Height-adjustable auxiliary table with extraction for sanding radii - Spring-loaded belt tension automatically compensates for belt length differences - Equipped with double extraction ports - Extendable roller table extension - With rubber-coated sanding roller - Veneer edge sanding device with contact shoe, fine adjustment, pressure relief rollers, and stop rulers - Infeed ruler with groove for veneer overhangs - Quick changeover from veneer edge sanding to solid wood sanding possible Technical specifications: Dimensions and weights Length: approx. 1900 mm Width/depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Extraction connection Extraction nozzle diameter: 140 / 100 mm Drive capacity Oscillation motor: 0.25 kW Work table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Longitudinal table height adjustment: 230 mm Cross table minimum height: 720 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Sanding unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding area length: 1050 mm Sanding area width: 200 mm Oscillation stroke: 20 mm Ledpfxovwgbwo Ag Rjhd Item no. 5363001

Kondisi: baru, - Maximum equipment configuration for professionals with Tersa cutterhead. - Ideal for demanding craftsmen and joiners. - Extra-long surfacing tables allow for easy straightening of workpieces. - Work tables are made of cast iron, making them resistant and permanently flat. - Rearward, simultaneously opening surfacing tables allow for short setup times. - Helically serrated steel infeed roller ensures consistent and even wood feed. - Rubber outfeed roller at the thicknesser exit ensures uniform wood extraction. - Material feed with four speeds. - Thickness table adjustment via handwheel with numerical height display. - TERSA planer knife system allows for tool-free knife changes in seconds and particularly quiet operation. - The large surface fence (1,200 mm x 150 mm) remains in place when opening the surfacing tables. - The high machine weight ensures maximum precision and smooth operation. - Prepared for mortising attachment. Digital version with electric thickness table adjustment. Technical Data Total length of tables: 2,250 mm Working width: 520 mm Max. planing depth: 5 mm ---Thicknesser Technical Data--- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. working length thickness: 220 mm Feed speeds: 5/8/12/18 m/min Cutterhead diameter/blades: 120 mm / 4 pcs. - Ideal for demanding craftsmen and joiners - Especially long one-piece surfacing tables enable easy straightening of workpieces - Work tables made from cast iron, thus resistant and permanently flat - Rear-opening, simultaneously lifting surfacing tables with spring assistance for quick and convenient changeovers - Thanks to the fixed dust extraction hood, there is no need to switch the extraction hose during changeovers, saving valuable working time - Helically-toothed steel infeed roller ensures consistent and uniform wood feed - Rubber outfeed roller at the thicknesser exit ensures uniform wood extraction - Material feed with four speeds - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: with electric thickness table height adjustment and digital display - Start and stop switch in operator position - Powerful industrial motor - High machine weight ensures highest precision and smooth running - Prepared for mortising unit Technical Data Dimensions and Weights Length (product): approx. 2,250 mm Lhedpovwd U Isfx Ag Red Width/depth (product): approx. 1,370 mm Weight (net): approx. 695 kg Surfacer Total table length: 2,250 mm Max. planing depth, surfacer: 5 mm Surface fence length: 1,200 mm Surface fence height: 150 mm Extraction Connection Extraction port diameter, thicknesser: 1 x 120 mm Installation Information Space requirement length: 2,250 mm Space requirement width/depth: 1,440 mm Space requirement explanation: Dimensions take into account maximum travel ranges or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height thickness: 3 mm Max. working height thickness: 240 mm Min. working length thickness: 220 mm Max. planing depth thickness: 5 mm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Line frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 pcs. Cutterhead speed: 5,000 rpm Max. planing width: 520 mm

Kondisi: baru, – New – Description: - TERSA quick-change system for blade changes within seconds - Four-knife cutterblock for optimal planing results - Smooth operation thanks to precision assembly and heavy cast-iron construction - Long jointer tables for precise jointing - Robust jointer tables made from ribbed, stress-relieved, milled grey cast iron; durable, distortion-resistant, and highly resistant to wear - Large, sturdy aluminum fence with round bar guide (1200 x 150 mm), easily adjustable and tiltable up to 45° - Supplied as standard with auxiliary fence - Powerful 5.0 kW industrial motor - Stable steel and cast iron construction - Slot mortising unit retrofittable Length (product): approx. 2250 mm Lhodpfx Ajvwf Hrjg Rjd Width/depth (product): approx. 1370 mm Weight (net): approx. 465 kg

Kondisi: baru, new Description: Lsdpfx Asvxr Ryog Rshd - Vertical design for splitting short and meter-length logs - Robust and solid construction - Impact and scratch resistant thanks to high-quality powder coating - Quick, tool-free splitting height adjustment - Low loading plate for easy, fatigue-free loading of large logs - Phase inverter on all 400 V models - Convenient transport using manual drawbar with standard chassis equipped with large pneumatic wheels and an additional support wheel - Space-saving storage thanks to easily lowerable cylinder - High-performance industrial hydraulic system - Two-hand safety operation - With log holding device Technical Data: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 282 kg Drive PTO speed 540 rpm Machine Data Max. splitting force 23.4 t Min. splitting length 560 mm Max. splitting length 1100 mm Min. log diameter 80 mm Max. log diameter 350 mm Hydraulic System Hydraulic oil tank capacity 24 l Art. No. 5981023

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Ledpfx Agecnw U Do Rjhd Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2025, Holzkraft Combined Planer-Thicknesser Machine - Immediately Available - Ideal for demanding craftsmen and joiners The particularly long jointer tables made from a single piece enable easy planing of workpieces The worktables are made of cast iron, making them resistant and permanently flat Jointer tables open simultaneously to the rear with spring support for quick and convenient conversion Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time The helically grooved steel infeed roller ensures constant and uniform wood feed Rubber outfeed roller at the thicknesser outlet provides consistent wood extraction Material feed with four speeds Thicknessing table height adjustment via handwheel with integrated thickness scale DIGITAL version: with electric thicknessing table height adjustment and digital display On/Off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Provision for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total table length 2250 mm Max. cutting depth 5 mm Fence length 1200 mm Fence height 150 mm Dust Extraction Connection Extraction port diameter thicknesser 1 x 120 mm Drive Power Main motor 7 kW Installation Information Required space length 2250 mm Required space width/depth 1440 mm Note: The specified dimensions account for the maximum travel paths or usable lengths. Thicknesser Thicknessing table length 850 mm Thicknessing table width 520 mm Min. working height 3 mm Max. working height 240 mm Min. working length 220 mm Max. cutting depth 5 mm Electrical Data Supply voltage 400 V Phase(s) 3 Ph Current type AC Lhjdpfx Agsih Dxde Red Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Max. planing width 520 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - Immediately Available -

Kondisi: baru, Tahun pembuatan: 2025, en_Holzkraft_RLA210_Dust_Extraction_Unit Ljdshk Dfrjpfx Ag Rjhd

Kondisi: baru, Tahun pembuatan: 2026, Maximum configuration for professional users. Multi-function combination machine with TERSA cutterhead, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved with the scoring saw blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside. High-precision aluminium sliding table, anodised, running on hardened and riveted steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° backwards into the fence. Four spindle speeds. Forward and reverse rotation of the spindle moulder. Quick changeover to thicknesser thanks to parallel-opening jointer tables. 2-speed feed on the thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Supplied with a separate rip fence and separate jointer fence. Lockable main switch. Equipment details: Format fence Instant control Outrigger Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Guides riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty against wear on the hardened guideways. Grey cast iron double-trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Mounted close to the saw blade, supported on both sides. Lhodpscnxa Ssfx Ag Rjd Height and tilt adjustable up to 45°. Scoring unit with separate 0.55 kW motor as standard. Double-trunnion moulder unit Large, tilting double-trunnion spindle moulder unit made of grey cast iron. Spindle fence Heavy-duty professional design. The high-quality spindle fence made of grey cast iron comes with fine adjustment as standard. Three-way positionable for rapid return to preset settings. Fine adjustment by means of rack-and-pinion, numerical display, and aluminium fence jaws. Planer units Helical-toothed steel infeed rollers for constant and uniform wood feed. Heavy-duty anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterhead ensures an optimal finish. Table lips for quieter operation. Tersa planing knife shaft No setting or screwing required. Knife changes in seconds. Self-locking. Particularly quiet operation. Thickness table The thickness table is mounted on four large-dimension spindles, ensuring maximum stability under all working conditions. Special lifting mechanism keeps the table position stable even without locking. Parallel fence With fine adjustment and quick clamping. Robust round bar guide made of ground steel. Exchangeable aluminium rule. No measuring gap; guide rods overlap. Separate jointer fence Large professional design (1800 x 150 mm), tiltable 0-45°. Quick adjustment. Robust round bar guide made of ground steel. Simultaneous opening Model No. 5500557

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, ST 3 classic F 23 - Combined Saw-Spindle Moulder Machine Features: Lhjdpfx Agscnwyds Rod - With tilting saw blade, tilting spindle moulder, and sliding table made of anodised aluminium - Robust steel and cast iron construction - Large support surface and precision-cast iron table - High-precision sliding table made of anodised aluminium (slide travel 2250 mm) - Large outfeed table (900 x 600 mm) with extendable aluminium telescopic fence - Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°-45° - Saw rip fence with fine adjustment - Stable saw unit and large double-trunnion spindle moulder assembly ensure maximum stability, precision, smooth running, and long service life - Solid and precise machine table made from stress-relieved cast iron - Three spindle speeds, manually adjustable from 3,500 - 10,000 rpm - Spindle with forward and reverse rotation - Standard spindle moulder guard - Two 5.0 kW motors with ample power reserves Cast iron spindle moulder unit: - Secured on both sides at the top - Precision ball bearings at the top - Close to the lever point - Four optimally graduated spindle speeds enable workpiece sharpening Powerful motors: - Industrial motors suitable for continuous operation (100% duty cycle at full load) Scope of delivery: - Spindle moulder guard - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops Technical data: - Dimensions cast iron work table: 1112 x 430 mm - Crosscutting length: 2250 mm - Max. saw blade diameter with/without scoring: 315 mm - Max. cutting height at 90°/45°: 100/70 mm - Max. crosscut width: 2660 mm - Saw blade tilt: 90° - 45° - Cutting width: 900 mm - Speed: 4000 rpm - Spindle moulder: - - Spindle tilt: 90° - 45° - Useful spindle length: 100 mm - Max. tool diameter: 210 mm - Max. tenon tool diameter: 275 mm - Max. retractable tool diameter: 180 mm - Speeds: 3,500/7,000/10,000 rpm - General: - - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) - Weight: 470 kg - Extraction port diameter: 2 x 120 mm - Extraction port diameter (blade guard): 60 mm Location: In stock at 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2025, en-GB: Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing operations (not suitable for dust) 180° rotatable extraction unit allows extraction from above or below Robust metal impeller Supplied as standard with a premium chassis for improved stability and easy manoeuvring Quick-release fasteners for filter and chip collection bags Fine filter bag with double weave Dimensions and Weights Chip collection volume: 2 x 120 l External diameter of extraction inlet: 203 mm External diameter of extraction outlet: 1 x 100 mm, 2 x 120 mm Length approx.: 1,500 mm Width/Depth approx.: 500 mm Height approx.: 2,100 mm Lhedpfx Agjhk S Sde Rjd Weight approx.: 53 kg Electrical Data No-load speed: 2,950 rpm Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2 x 1.92 m² Noise Emission Max. sound pressure level: 87.5 dB(A) Air Flow Rate Nominal air flow: 2,800 m³/h Maximum negative pressure: 1,900 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: ex-stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and cabinetmakers The especially long, one-piece jointer tables allow for easy straightening of workpieces Work tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening jointer tables with spring-assisted support for quick and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose during machine conversion, saving valuable working time Helically toothed steel infeed roller ensures a constant and uniform material feed Rubber outfeed roller at the end of the thickness planer guarantees even wood extraction Material feed with four speeds Planer thickness table adjustment via handwheel with integrated height display DIGITAL version: with electric thickness table height adjustment and digital display On/off switches positioned for operator convenience Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit installation Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total table length: 2250 mm Maximum cutting depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Explanation on space requirements: Dimensions take into account maximum travel distances or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Lsdeff Hdpspfx Ag Rjhd Working height min.: 3 mm Working height max.: 240 mm Working length min.: 220 mm Maximum cutting depth: 5 mm Electrical Data Connection voltage: 400 V Phases: 3 Ph Current type: AC Line frequency: 50 Hz Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Kondisi: baru, Tahun pembuatan: 2025, Raw Air Extraction Unit ASA 203 With Standard Chassis Dimensions and Weights Chip Collection Capacity: 175 l Nominal Diameter (Outer) of Suction Nozzle (Inlet): 200 mm Length approx.: 1061 mm Width/Depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Surface Area: 2.2 m² Noise Emission Maximum Sound Pressure Level: 84 dB(A) Air Flow Rate Nominal Airflow: 2500 m³/h Suitable for milling, planing, and saw chips (not dust) Significantly reduced residual dust content due to BIA-certified filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for filter and chip bags enable trouble-free maintenance Sturdy, premium-grade construction Easy to move thanks to swivel castors Low energy consumption Extraction units comply with dust class L Scope of Delivery: System body with mounted fan unit Lhedjhk S Szepfx Ag Red Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Professional workbenches Precise and meticulous craftsmanship Constructed entirely from steamed, solid beech Lodpfsc Uydasx Ag Rshd All critical edges are rounded Eco-friendly, oiled surfaces Standard with tool drawer Both vise guide rods are precisely and stably guided in a cast iron housing Equipped with a smooth-action trapezoidal threaded spindle Features a French front vise and German-style tail vise with linear guide, two short round bench dogs, two long round bench dogs, drawer, and side compartment Finger-jointing in the tail vise and rear of the side compartment Length of working surface without vises: 1915 mm Width/depth of working surface without vises: 615 mm Working height: 870 mm Front vise length: 520 mm Tail vise length: 450 mm Front vise width: 70 mm Tail vise width: 140 mm Front vise clamping capacity: 190 mm Tail vise clamping capacity: 180 mm Front vise clamping capacity to center of round dog: 225 mm Tail vise clamping capacity to center of round dog: 265 mm Workbench top thickness: 50 mm Overall length (product): 2120 mm Overall width/depth (product): 790 mm Overall height (product): 870 mm Weight (net): 91 kg Location: In stock at 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2026, Rugged construction allows for machining of longer workpieces Grinding unit can be swiveled, making it suitable for use as an edge sanding machine Balanced 225 mm belt pulleys ensure low-vibration operation Easy sanding belt adjustment High belt speed of 17 m/s Reversible belt direction (right/left run) Top sanding shoe with graphite coating 4-way spring-loaded sanding shoe Includes movable sanding shoe for angled-edge surfaces Smooth-running sanding table even under heavy loads from large workpieces Optimal price-performance ratio Additional ESE Equipment Standard with electric table height adjustment Split table that folds up for special edge sanding applications Drawer sanding device Integrated worktable lighting Equipment Details Large, balanced 225 mm belt pulleys ensure optimal and low-vibration drive Belt speed: 17 m/s Swiveling professional sanding shoe for inclined surfaces 4-way spring loaded Standard with electric table height adjustment Ergonomically positioned controls on a separate control panel Standard drawer sanding device Split table folds up for special edge sanding applications Dimensions and Weights Length approx. 3,750 mm Width/depth approx. 1,250 mm Height approx. 1,730 mm Weight approx. 520 kg Dust Extraction Extraction nozzle diameter: 160 / 160 mm Worktable(s) Table height adjustment: 550 mm Lateral table travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Ljdpeff Hdfefx Ag Rshd Grinding Unit Sanding belt length: 7,000 mm Sanding belt width: 150 mm Belt speed: 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Kondisi: baru, Tahun pembuatan: 2025, Designed for professional structuring and sanding operations Motorized height adjustment of the working units with digital display Units can be activated individually Highly durable rubberized feed belt Variable feed speed Constant infeed height STR L models with infinitely variable, inverter-controlled brush speed: This allows precise adjustment of the brush speed to the material, making it especially suitable for sensitive materials. Unit for saw-cut finish optionally available Lodpsff Hdgefx Ag Rjhd - Motorized height adjustment of the units - Units can be switched on individually - Feed speed steplessly adjustable Dimensions and weights Length approx. 1300 mm Width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Speed: 1500 rpm Electrical data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Connected load: 6.25 kW Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Noise emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding unit Max. sanding width: 300 mm Feed unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg

Kondisi: baru, Tahun pembuatan: 2025, Beschreibung Technische Daten Lieferumfang Zubehör Ausstattungsoptionen Ideal for demanding craftsmen and joiners The especially long, one-piece surfacing tables enable easy jointing of workpieces Work tables are made of cast iron, making them robust and permanently flat Rearward, simultaneously opening surfacing tables with spring assistance for fast and convenient conversion Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time Helically-toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing table exit ensures uniform wood outfeed Material feed with four speeds Thicknessing table adjustment via handwheel with integrated planing height display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for slot mortising device Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Surfacing Total length of tables: 2250 mm Maximum depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust extraction connection Thicknessing extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Lodpfoff Hdmox Ag Rehd Installation Information Required space – Length: 2250 mm Required space – Width/Depth: 1440 mm Space requirement explanation: Dimensions take into account maximum travel distances or usable lengths. Thicknessing Thicknessing table length: 520 mm Thicknessing table width: 850 mm Minimum working height: 3 mm Maximum working height: 240 mm Minimum working length: 220 mm Maximum depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed Speed: 5/8/12/18 m/min