Beli Homag Bof 211 bekas (488)

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a processing line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: NC 21 / HOMATIC Hfjdpfx Aehvi E Ijhnsh Feed speed (adjustable) m/min: 15 - 50 Safety and soundproofing cabin Cam spacing (mm): 500 Panel processing (per side): Spray unit (for liquid non-stick agent) Pre-milling unit: 1 x 4.5 kW Chipper KD 11 (2 x 6.6 kW) LEFT SIDE: Universal milling unit (electropneumatically controlled), SF 20 (1 x 6.6 kW), 0°-90° RIGHT SIDE: Free position / slot EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot no. 6). Edge pressure zone "A" (1 + 4 rollers) End trimming unit HL 04 (2 x 0.18 kW) Pre-milling unit OPTIMAT (2 x 0.55 kW) Multi-function unit (radius and profile milling) FK 11 - 2 x 0.4 kW Multi-profile scraper unit PN 20 Flat scraper unit (pneumatic) Buffing unit (2 x 0.25 kW)

Kondisi: sangat baik (bekas), 4-axis CNC MACHINING CENTER for milling, drilling, cutting, and edge banding. Swan-neck machine – safety tread mats in front CNC control system Type PowerControl PC 85 (Software: WoodWop) 10 supports/consoles (1340 mm) LEDs indicate the programmed vacuum pod positions (Y-axis) Hedpfx Ahoh Ucn Rsnefh Automatic tool change system (rotary changer, 18 positions) Usable working area (X - Y - Z): 6175 x 1550 x 60 mm Usable working area for edge banding (X - Y - Z): 6000 x 1475 x 60 mm 2 working zones – 2 vacuum pumps (capacity: 100 m³/h) Chip conveyor for efficient waste removal from the working process Total connected load: 27 kW Working units (top) - 17 independent vertical drilling spindles (2.2 kW) - 4 independent horizontal drilling spindles - 1 vertical electrospindle HSK F63 (main spindle 11 kW) - 1 grooving saw aggregate (0°-90°), diameter 125 mm Edge banding unit: Power Edge (Y-axis), glue application aggregate (hot-melt glue + pre-melter) Edging material (rolls) thickness (min/max): 0.4 – 3 mm Edge roll magazine (2 positions)

Kondisi: sangat baik (bekas), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) Hodpfx Aheivawponofh No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 20

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Hsdpfx Ajp N D Ngehnefh Cam spacing (mm): 400 SIZING (for each side): - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: sangat baik (bekas), FORMAT and EDGE-BANDING LINE for SINGLE-SIDED POSTFORMING OPERATIONS (FOR DIRECT PROCESS) Consisting of the following machines: A) Double-sided gantry feeding system “TREVISAN” with motorized roller conveyor B) HOMAG single-sided POSTFORMING MACHINE FOR DIRECT PROCESS Mod. Profi VFL79/3/P/A - Max. laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit, 2.2 kW (for top grooving) - 02° Hogging unit, 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit, 6.6 kW (for rebate milling from above), motor shaft for hydro clamping - 04° Standard milling unit, 6.6 kW (for rebate milling from below) 0° - 120° (with hydro clamping) - 05° Radius milling unit, 0.7 kW (for profiling corners) - 06° Milling unit for top layer at U-profiles, HSK25, 1.85 kW - 07° Universal milling unit UF 11, 4 kW (for grooving or rebating) - 08° Milling unit, 2.2 kW (for chamfer and laminate flap milling above) - 09° Milling unit, 2.2 kW (for bottom bending groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 – 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° – 25° Hedpfx Ahonzhxqjnjfh - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate break-outs) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for max. workpiece thickness 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Roll cutter above - 18° Milling unit above, 1 x 0.55 kW, 0° – 30° - 19° Polishing unit above with oscillation, 1 x 0.25 kW C) Double-sided gantry stacking system “TREVISAN” with motorized roller conveyor

Kondisi: sangat baik (bekas), Double-sided sizing and edge banding line (short line) max. working width 2500 mm, with automatic high-speed feed system: O02006A) Loading table with roller conveyors "HOMAG" PROFI TBL100/30/12 O02006B) Turning device (longitudinal/transversal), "HOMAG" PROFI TDL /310 /25 /12 Hsdpov D U Urefx Ahnefh O02006C) Double-sided sizing and edge banding machine "HOMAG" Model PROFI KFL 526/10/A3/25 O02006D) Turning device (transversal/longitudinal) "HOMAG" PROFI TDL 510/25/12

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (roll) (min/max): 0.3 - 3 mm - Workpiece thickness (panel) min./max.: 12-40 mm - Working width (min./max.): 250-2500 mm - PC control: PC22 - Top pressure system with driven rubber belts - Adjustable feed fence: 10-32 m/min - Liquid glue unit - Jointing milling unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt adhesive unit A3 - Pressure zone C (manual adjustment) "A" Hfedpswk Hp Tsfx Ahneh - Roll holder for 2 rolls - End trimming unit: HL 84 (2x 0.22 kW at 12000 rpm) - Pre-milling unit (2x 0.4 kW at 12000 rpm) - Finishing unit (scraper blade unit + buffing unit): FA11 - Polishing unit

Kondisi: sangat baik (bekas), A) Case clamp with CNC (electronic) type MDE 110/28/08 Motorized transport and assembly conveyor Feed speed: 12–40 m/min CNC Control: Power Control PC C 22 T Total power: 14 kW Total machine length: 6220 mm Hfsdolkbn Ijpfx Ahnsh Processable workpiece dimensions: Length min./max.: 250 / 2800 mm Depth min./max.: 120 / 800 mm Height min./max.: 280 / 1320 mm B) Motorized conveyor belt model MTB 200/20/08 (length: 2000 mm) C) Motorized conveyor belt model MTB 200/20/08 (length: 2000 mm)

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable alignment stops, spacing (mm): 1000 EDGE PROCESSING (for each side): Hsdouhv R Djpfx Ahnsfh Protective cutter (pre-milling) (1 x kW 4.5) Chip breaker KD 11 (2 x kW 6.6) Jointing milling unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (for each side): Gluing unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (slot No. 2) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spraying unit (for polishing liquid) No. 2 Universal milling units for grooving/rabbetting and profiling SF20 (2 x kW 6.6) Powered panel infeed roller conveyor with singulation system "HOMAG" Mod. POWER TBL 100/20/25

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 80 Edge thickness in strips (min/max) mm 0.4 / 20 Control unit NC21 Feed speed m/min 18 Hfsdol Iz Tuspfx Ahnsh Top pressure powered by V-belt drive Adjustable fence, CNC controlled Jointing milling unit 2 x 3 kW Gluing unit (Hot Melt + Pre-melter) A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment for bevel/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profile scraper unit Finishing unit (flat scrapers + polishing unit) FA 10

Kondisi: bekas, nomor mesin/kendaraan: 006622, Maximum panel width: 2,100 mm Maximum panel length: 2,850 mm Maximum panel stack height above ground: 2,100 mm Hfjdpfeu T Tt Tjx Ahnsh Lifting capacity: 250 kg Movement system: with suction elements

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Working height: 900 mm Working width: 1,350 mm Belt change side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt blowing device, 5-step adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically moves to a 10 mm workpiece thickness and the blowing rotors are activated. After the feed belt has been completely cleaned, the machine returns to its original setting. AAT EXTRACTION SLIDE GATE CONTROL Control of extraction slide gates via the terminal (24 volts DC, without extraction slide gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1–3 PC Emergency power supply for belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – underside sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. Machine is pre-configured for up to two auxiliary units, such as cleaning brush, satin or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatic pressure roller adjustment, profiled steel roller, 240 mm diameter with grit compensation system Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatic pressure roller adjustment, rubber roller, 240 mm diameter Rubber hardness: 85° Shore with grit compensation system Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for mounting a pressure bar - Automatic locking of the sanding assemblies for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation - Protected storage on the machine for additional sanding tools Drive motor: 22 kW Abrasive belt speed: 2–18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BAR - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the front and rear workpiece edges - Various sanding inserts, 80 mm width, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, but additionally: Hfsdpfxoyw Ndmj Ahnoh FBM FINISH BRUSH Brush unit with finish brush Brush fill: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) - 4 axes Gantry-type design Power Control system - woodWOP software Safety enclosure for the machining head Clamping table with 6 consoles Safety tread mats Hfodpfoyxn Tiex Ahnjh LASER system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disc-type tool changers - 8 tool positions at the rear + 8 tool positions on the side Maximum working area (X - Y - Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones - 1 x vacuum pump (capacity 70 m³/h) Chip conveyor With separate electrical cabinet and controls Total connected load: 32 A WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 X-axis + 2 Y-axis) Drilling head motor power: 2.3 kW 1 grooving saw unit, diameter 125 mm, N1 - swiveling 90° in X-Y direction 1 vertical main spindle (milling unit) HSK 63: 9 kW OPTIONAL: Drilling and milling unit with 4 horizontal spindles (cross spindle arrangement) BARCODE SCANNING SYSTEM PACKAGE PROFESSIONAL

Kondisi: baik (bekas), de-01 Hedob A Nx Dopfx Ahnjfh

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, panjang benda kerja (maks.): 2.500 mm, DETAIL TEKNIS Panjang panel min.: 300 mm Panjang panel maks.: 2.500 mm Pengembalian panel pada mesin pelapis tepi: Kiri Pengeluaran panel: melalui meja dengan nozzle udara Mesin dijual dan dikirim dalam kondisi aktual dan hukum (“apa adanya dan sesuai yang dilihat”), berdasarkan dokumentasi foto serta dokumen teknis/komersial yang bersifat deskriptif. Pembeli berhak untuk memeriksa barang sebelum pengambilan dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di lokasi tujuan. Hjdpfxjyxnapo Ahnefh Referensi eksternal: 7877

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, nomor mesin/kendaraan: 0-200-87-0913, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, ketebalan tepi (maks.): 3 mm, jenis penyesuaian ketinggian: listrik, panjang total: 10.825 mm, Perlengkapan: dokumentasi / manual, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left side. Year of construction 2023, first commissioning Nov. 2023 SPECIFICATION / CONFIGURATION: Base machine with 80 mm wide transport chain as workpiece feed system, - Maximum workpiece thickness 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift-off upon feed stop - Glue roller clamp in front of workpiece trailing edge - (Remote) hand control for easy machine setup - Adjustable infeed guide rail via NC axis - Joint trimming (co-/counter-rotation) 2x3kW, operation-controlled Horizontal positioning via NC motor (CAN) EDGING UNIT V20, consisting of: - QA60 glue application unit, with PTFE coating (Teflon) - Pre-melter for PUR adhesive - Both EVA and PUR adhesives processable - Edge magazine, min. 0.4 mm to max. 3 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 horizontal end trimming unit, 2 motors each 0.8kW (front/rear edge), able to trim bevel/straight and overhanging - Pre-/flush trimming unit 1.15 kW, top/bottom - Fine trimming unit top/bottom, with NC adjustments Hedpey D A Swjfx Ahnefh - MF60 profile trimming unit for corner rounding, 2 motors (top/bottom), servo-controlled with soft touch - Controlled universal trimming unit - Profile scraping knife top/bottom, with interchangeable heads - FA10 flat scraping knife, top/bottom (version with 3 tracing rollers) - Buffing unit top/bottom CONTROL: - PC 23 powerTouch - woodCommander 5 - Set-up in gap mode - Edge tracking control

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Workpiece & Performance Panel formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Main line capacities (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle forming: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Portal Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return with light curtain safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decorative-appropriate downstream processing 4. Multiblade Circular Saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate: 2–48 m/min • Max. cutting height: 58 mm • Main motor: 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cutting) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross Cut Station HPp11 Cross cutting in continuous run with hold-down beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Layer turning device (2×8 compartments) to separate multiple stacks • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° redirection with belt conveyors, feed up to 130 m/min Transfer to profiling line Profile Processing (soundproof) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided edge processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Glue joint coloring + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • Identical configuration • Integrated edge sealing 11. Sonolit Soundproof Cabin Enclosure for both HOMAG profile machines • Approx. 12,000 × 7,000 × 3,000 mm Postprocessing 12. BARGSTEDT TTK44/21/14/02 Drying Turner Workpiece turning in continuous operation • Up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Forming Station Automatic bundle forming with first/second quality sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm Hfjdpfxoywxras Ahnjh • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and provision of cartons before packaging • Capacity up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Applicator Automatic application of protective paper • Guaranteed up to 10 packs/min 17. Labeling Station Automatic package labeling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping Line Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling line after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Bundle Cross Stacker Automatic stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Max. capacity 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer pallet forming with vacuum lifters • Up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Kondisi: sangat baik (bekas), Flexible batch size 1 production and single-sided edge banding line (right) Consisting of the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x Kw 3) DOUBLE gluing unit (PUR glue + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (12 compartments) End trimming unit WK13 (CHAMFER / STRAIGHT, automatic adjustment) Pre-milling unit (2 x Kw 0.55) pneumatic adjustment Multifunction profile milling unit (CNC-controlled) MF 21 (2 x Kw 0.55) Profile copying milling unit FF 32 (4 x Kw 0.4) with automatic changeover device Contour trimming unit (for fine milling), CNC-controlled FK 31 (30 m/min) recently added after a technological retrofit Multi-profile scraping unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbeting and profiling UF 11 (1 x Kw 4) Hfjdpfx Aeinigmehnjh M.03) LOADING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, de Hfsdpfx Asxvy Ukjhnoh

Kondisi: sangat baik (bekas), Kontrol PC Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Konveyor bermotor tipe thru-feed No. 2 Dudukan bor horizontal (tampilan digital untuk data posisi sumbu) No. 1 Unit bor untuk setiap dudukan bor horizontal (1 x 1,5 kW) No. 21 Spindel untuk setiap unit bor horizontal Lebar kerja maks. (mm): 2500 Lebar kerja min. (mm): 250 No. 4 Dudukan bor vertikal bawah (tampilan digital untuk data posisi sumbu) No. 2 Unit bor untuk setiap dudukan bor vertikal bawah (2 x 1,5 kW) No. 4 Penjepit benda kerja vertikal atas Sabuk pembuang serbuk Daya total terpasang (kW): 35 Hfedpoyv Ev Aefx Ahnoh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 70004, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, Parameter teknis Dimensi - panjang: 9,8 m - lebar: 1,5 m - tinggi: 1,8 m Daya motor: 40 kW Perlengkapan - kecepatan pengumpanan: 6 - 30 m/menit - ketebalan panel: min. 8 mm, maks. 60 mm - lebar panel (dengan tepi): min. 65 mm (untuk ketebalan tepi 0,4 - 3 mm) - panjang panel: min. 150 mm - tinggi tepi: min. 14 mm, maks. 65 mm - ketebalan tepi: min. 0,4 mm, maks. 20 mm Hfodpfxeyzc Ige Ahnsh

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), 1 Hfsdpfx Aoyzcc Rjhnoh

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Lini produksi industri HOMAG WEEKE ini diproduksi pada tahun 2007. Lini ini dilengkapi dengan sistem lengkap untuk pemrosesan panel volume tinggi dan edge-banding, termasuk sistem pemuatan otomatis, konveyor rol sentral, beberapa modul edge-banding, serta manipulator portal untuk penumpukan. Cocok untuk produksi kayu yang efisien, memastikan penanganan yang cepat dan presisi. Pertimbangkan kesempatan untuk membeli lini produksi industri HOMAG WEEKE ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hfjdpfxox D Dq Sj Ahnsh Jenis Aplikasi Produksi Lengkap

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture components, allowing workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge bander capable of processing various edging materials up to 20 mm thick. If you are looking for high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edge banding machine, which we have for sale. Contact us for more details. Hjdpfsytf Irsx Ahnsfh • Line workpiece capacity: • Length: 250-3000 mm • Width: 120-1200 mm • Thickness: 8-60 mm • Edge banding machine (KAL 330) – Base and transport • Continuous machine frame; workpiece support with extendable roller rail ~800 mm • 80 mm wide transport chain with rubber coating; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18-25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depends on workpiece length) • Workpiece protrusion/overhang 30 mm • Workpiece thickness 12-60 mm • Edging material from strip: 0.4-20 mm (max. cross-section 900 mm²) • Edging material from coil: 0.3-3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter 830 mm • Pneumatic connection 7-8 bar • Infeed system and control (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic feeding (longitudinal and transverse); suitable for dimensionally accurate, square parts • Stepless adjustment of the infeed guide (axis), adjustable speed at entry terminal • Automatic aggregate lateral adjustment (workpiece overhang 30-80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edging preparation and gluing • Pre-milling unit: 2 motors, 4 kW each, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Premelting unit with granulate reservoir • Quick-change system for QA/QE application unit; QA front glue reservoir for color changes • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • HL84 milling unit with stationary milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side milling fence adjustment when changing edge thickness • Rough trimming unit: 2 motors on top of each other, 1.5 kW each, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position adjustment: rough trimming with ~0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Servo contour trimming unit FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces 500 mm • Workpiece thickness 12-60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guidance with additional clamping for min. 120 mm workpiece length (one-sided) • Post-processing and cleaning • Multi-cleaning unit MN21 automatic:

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Hjdpfx Ahoytr Hbenjfh Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216