Beli Horisontal Bantal Paket Wrapping Mesin bekas (79.451)

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: K500-50739, panjang total: 14.000 mm, tinggi total: 2.500 mm, lebar total: 3.600 mm, jenis arus masuk: tiga fasa, tinggi produk (maks.): 100 mm, tinggi produk (min.): 30 mm, panjang produk (min.): 500 mm, panjang produk (maks.): 1.800 mm, lebar produk (maks.): 1.500 mm, lebar produk (min.): 600 mm, tegangan masuk: 400 V, sambungan udara terkompresi: 6 batang, arus masuk: 33 A, tinggi kerja: 900 mm, lebar meja: 1.700 mm, panjang meja: 2.000 mm, tinggi lewatan: 250 mm, tahun perombakan terakhir: 2022, berat benda kerja (maks.): 100 kg, Perlengkapan: dokumentasi / manual, Overall Machine Dimensions: Width: 3,600 mm Hedpfevvlyisx Aa Nong Length: 10,600 mm (without feed and discharge area) Height: 2,500 mm Working Height: 900 + 50 mm Feed Rate: 13 - 23 m/min (frequency controlled) Properties of PE Shrink Flat Film • Shrink film suitable for shrink sealing process. (Top and bottom films must be sealable on the sides in the tunnel). • Biaxial shrinkage value of approx. 50-60% longitudinal, approx. 40-50% transverse • Antistatic treated. • Shrink film with needle perforation improves the shrink process and has higher gas and water vapor permeability. Shrink Film to be Used • Biaxially shrinking, needle perforated. • Wound on rolls, tension tight and with straight edges. Film Thickness: Application: approx. 40 - 60 µm. Film Widths: Application: 800 mm, 1100 mm, 2000 mm Roll Outer Diameter: max. 350 mm Core Outer Diameter: min. 90 mm Calculation for Bottom Film: Package width + 200-250 mm Calculation for Top Film: Package width + (2 x height) + 200-250 mm Technical Component Data: Conveyor Belts: Infeed Conveyor (W x L): 1,700 x 2,000 mm / Feed speed: 13 - 23 m/min Roller conveyor after tunnel (W x L): 1,700 x 2,000 mm / Feed speed: 13 - 23 m/min KFE Standard Film Wrapping Machine: Max. film roll width, top and bottom: 2,100 mm / Max. package height (clearance): 250 mm / Max. film roll diameter: 350 mm Film thickness: approx. 40-60 µm PE film of good quality / Weight: approx. 3,100 kg Side Sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Feed, adjustable: 13 - 23 m/min Shrink Tunnel ST / II-1800-3000-300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Feed, adjustable: 6 - 23 m/min The machine can be inspected at the production site.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, You are bidding on a Hurco Winmax V9 package, suitable for Ultimax 4 machines from year of manufacture 2006 onwards. The package has been properly uninstalled and can be reinstalled on any Ultimax machine from 2006 onwards. Hedpfetu Uc Eox Aa Nsng The price includes hardware and on-site installation. All prices are exclusive of VAT. We have additional options in stock, also for Winmax machines. We are happy to assist you with the installation. Please contact us. No longer receiving service for your used Hurco milling machine? No problem! We offer service and retrofitting for ALL Hurco milling machines, regardless of the year of manufacture.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Horizontal Machining Center Starrag-Heckert HEC 1600 Athletic in operational condition Pallet size: 1250 x 1600 mm Pallet load: max. 8,000 kg Number of pallets: 25 pcs Fastems Table indexing: B-Axis 0.001° Table cross travel (X): 2,800 mm Spindle vertical travel (Y): 2,200 mm Column longitudinal travel (Z): 2,100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40,000 mm/min. Rapid X/Y/Z: 40 m/min. Rotary table: 8 rpm Max. rotary diameter: 3,000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37 kW Spindle speed: 20 – 2,500 rpm Boring spindle diameter: 150 mm ATC: 80 tool pockets CNC controller: Siemens Sinumerik 840D Operating hours Spindle: 21,400 hours Accessories - Hexagon radio measuring probe - Coolant unit with vacuum rotary filtration system - High-pressure coolant supply through spindle - Electrically powered clear-view window Visiport - Laser tool breakage control in machining area Hjdpfxoguk I Ie Aa Neng - Circular path interpolation - Tool and process monitoring system ARTIS Machine without Fastems = without pallet changers - Pallet changer unit can be supplied by Starrag Heckert Year of manufacture: 2007 (See also further listings by this advertiser)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, A special-purpose machine service for the carton packaging industry is available. Packaging capacity: 110 cycles/min, min. folding box dimensions X/Y/Z: 60mm/20mm/130mm, max. folding box dimensions X/Y/Z: 160mm/90mm/265mm, Format 1: 72mm/31.5mm/244mm, Format 2: 96mm/39mm/240mm, Format 3: 87mm/46mm/161mm. Product: foodstuffs in blister packs/flow packs, chain pitch: 8 inches, rotary pusher: 30mm, cassette conveyor axis distance: 3454.4mm, belt width: 350mm, number of cassettes: 37. Machine dimensions X/Y: approx. 5250mm/1050mm, weight: approx. 2500kg. Documentation available. On-site inspection possible. Hnedpfxsv Dkcrs Aa Neg

Kondisi: siap digunakan (bekas), LCR Mod. QUARK Automatica Number of cardboard stations: 4 (no roll-fed) Various sizes and thicknesses Year: 2006 By entering the part dimensions on the control panel, the machine retrieves the most suitable program. The control operates with customer-defined programs (including protections) Based on the program, the machine automatically selects the most suitable cardboard size Operation is essentially automatic, but always starts from the part dimensions entered by the operator The machine features 6 independent axes Max. working width: 2,400 mm Min. working length: 450 mm Approx. min. working width: 200 mm Hodpfx Aewhbqtea Neng Control panel power: 3.5 kW Total length: 11,400 mm plus output support table Max. width: 3,199 mm Separate control panel

Tahun pembuatan: 2009, Kondisi: baik (bekas),

Kondisi: belum diuji (bekas), mesin pembungkus palet Hjdpfx Aasw U Rgvs Njng

Tahun pembuatan: 2022, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, LEONARDO is equipped with all the features of the compact yellow stretch-wrapping robot LEO, such as its minimal required operating space of 750 mm around a pallet, compact design, and motorized drive. In addition, it offers an electronically controlled film brake, up to 100% powered pre-stretch of film, and the patented mast, which allows a wrapping height of 2,350 mm with a total machine height of only 1,560 mm when at rest. • Compact build: requires only 75 cm of space • Suitable for pallets up to a maximum height of 2,350 mm • Patented mast, extends from 1,560 mm (resting position) to a maximum height of 2,350 mm • Electronically adjustable film brake, up to 100% motorized pre-stretch • Electric maneuvering (patented), reducing the working area compared to other robots • 6 freely programmable programs (program memory) • Wide sensing belt • Electrically controlled steering • Maintenance-free battery (2 x 12 Volt) • Integrated charger: 220 Volt Pallet dimensions: Length: min. 600 mm / max. unlimited Width: min. 600 mm / max. unlimited Height: min. 500 mm / max. 2,350 mm Film thickness: 8-30 micron Pallet weight: min. 50 kg Machine dimensions: Height: 1,560 mm (resting position) Length: 1,066 mm Width: 738 mm Weight: 195 kg Hnsdpfx Aaoih Srie Njg Drive battery: 24 V Integrated fast charger: 230 V Warranty: 12 months (single-shift operation)

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Horizontal Machining Center Starrag Heckert Model HEC 1600 Athletic – in ready-to-use condition (2) Pallet size: 1,250 x 1,600 mm Pallet load capacity: max. 8,000 kg Number of pallets: 25 pcs, Fastems system Table indexing: B-axis, 0.001° increments Table cross travel (X): 2,800 mm Spindle vertical travel (Y): 2,200 mm Column longitudinal travel (Z): 2,100 mm Boring spindle axial travel (W): 740 mm Feed rate X/Y/Z: 1 – 40,000 mm/min Rapid traverse X/Y/Z: 40 m/min Rotary table speed: 8 rpm Max. rotary diameter: 3,000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37 kW Spindle speed range: 20 – 2,500 rpm Boring spindle diameter: 150 mm ATC: 80 tool pockets CNC control: Siemens Sinumerik 840D Operating hours: Spindle: 22,200 hours Accessories: - Hexagon wireless touch probe - Coolant unit with vacuum rotary filtration system - High-pressure coolant through the spindle - Electrically operated clear-view window (Visiport) - Laser tool breakage detection in working area - Cylindrical path interpolation - ARTIS tool and process monitoring Hnsdsguk Nhepfx Aa Njg Machines without Fastems = without pallet changers. - Pallet changer unit can be supplied by Starrag Heckert on request. Year of manufacture: 2007 (See further offers from this seller.)

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), A cushion machine ACG Nowo (ACG Kinna Automatic) for processing cotton and filling it into textiles for pillow production is available. Documentation is included. An on-site inspection is possible. Hnedpswwvvpsfx Aa Nsg

Tahun pembuatan: 2009, Kondisi: baik (bekas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 • Max. package width (mm): 1250 Hodpepu Anmjfx Aa Neng • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Kondisi: baik (bekas),

Tahun pembuatan: 1969, Kondisi: bekas, nomor mesin/kendaraan: 304, Manufacturer: Hermle Model: FW 800 Machine No.: 304 Year of Manufacture: 1969 Weight: approx. 1000 kg General / Technical Data: Well-maintained used horizontal milling machine with hydraulic program control (camshaft control rail) for automatic production processes Spindle taper: SK 30 Travel paths: X 400 mm / Y 370 mm / Z 165 mm Spindle speeds: 18 steps mechanically shifted in 2 motor stages 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 1000, 1210, 1420, 1780, 2030, and 3050 rpm Feeds: infinitely variable hydraulically in the X and Y axes, manually in Z (horizontal milling spindle) Table dimensions (fixed table): 800 mm x 220 mm Power supply / spindle drive power: 380 Volt, 50 Hz / 1.5 kW Approx. machine dimensions (LxWxH): 1900 mm x 1100 mm x 1700 mm Hnododgrwdjpfx Aa Njg Accessories / Special equipment: - Fixed milling table - Lot of various tool holders - Swarf tray - Coolant system - Machine documentation with programming instructions Remarks The machine is in very good condition for its age. It is specifically designed for production applications in small and medium-sized series. The machine features a simple, cam switch-controlled hydraulic program control.

Tahun pembuatan: 2025, Kondisi: baru, en • Degree of automation: Manual • Inner ring diameter: 600 mm • Total weight: 310 kg • Max. rotation speed: 100 rpm Hedpfx Aewqdm Aoa Nong • Supply voltage: 400 V, 3Ph+N, 50/60 Hz • Installed power: 1.1 kW • Operating pressure: 6 bar • Conveyor belt dimensions (2 units): each 800 x 400 mm • Working height: 750–800 mm Mode of operation: The film is manually attached to the workpiece. The wrapping process is initiated via foot pedal. The workpiece is manually guided through the wrapping ring. At the end, the film is manually separated. An automatic cutting device is available at extra cost.

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), en: Horizontal machining center Giddings & Lewis HMC 410 Pallet size: 1,250 x 1,600 mm Maximum pallet load: 7,000 kg Pallet change time: 55 sec Number of pallets: 2 units Table indexing: B-axis 0.001° X-axis travel: 3,000 mm Y-axis (vertical) travel: 2,100 mm Z-axis (longitudinal column travel): 1,800 mm Feed rate (X/Y/Z): 1 – 40,000 mm/min Rapid traverse (X/Y/Z): 40 m/min Hsdpoguk Icjfx Aa Neng Rotary table speed: 6 rpm Maximum rotary diameter: Ø2,500 mm Spindle taper: ISO 50 Spindle drive motor: 30 kW Spindle speed range: 20 – 5,000 rpm Automatic tool changer (ATC): 120 tool pockets CNC control system: Siemens Sinumerik 840D Max. workpiece height: 2,000 mm Accessories - Hexagon wireless measuring probe - Loading stations: 2 units Year of manufacture: 2001 (See also other offers from this seller.)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, A fully automatic bundling and cellophane wrapping machine by Sollas is available. Film roll outer diameter: 320mm, max. roll width: 280mm, min. roll width: 80mm, core inner diameter: 80mm, film cut-off length min./max.: 90mm/470mm, packaging speed: 75 cycles/min. Product length min./max.: 45mm/200mm, product width min./max.: 20mm/165mm, min. product height at a length of 110mm or less: 85mm, max. product height at a length of 165mm or less: 60mm. Machine dimensions (L/W/H): approx. 1300mm/900mm/1300mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Hnjdpjv Ubpdefx Aa Njg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, en Hnedpfx Aajwb A N Re Njg

Tahun pembuatan: 2005, Kondisi: bekas,

Kondisi: bekas, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] Hodpfxeuhbwcj Aa Neng - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar loading magazine HYDROMAT 5.07.018-4, capacity 4200 mm - Position 1: Cut-off - Position 2: Longitudinal drilling 30/60 - Position 3: Longitudinal drilling 30/60 - Position 4: CNC turning (2 axes) - Position 5: Turning - Position 6: Radial drilling 30/60 - Position 7: CNC turning (2 axes) - Position 8: Angular drilling 30/60 - Position 9: Radial drilling 30/60 - Position 10: Angular drilling 20/50 - Position 11: Radial drilling 20/50 - Position 12: Longitudinal drilling 30/60 - Ejection between stations 12 and 1 - Workpiece conveyor - Chip conveyor KNOLL 450 K-1/2000 - Coolant tank KNOLL KTS-25-60-T - HP pump: 40 [bar] - Filtration KNOLL VRF 500

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight: maximum 30 kg/meter The maximum cross-sectional diagonal of the previous customer was 220 mm. The specified weights are only possible with a driven roller conveyor provided by the customer. Technical Data: Hedpfx Ajlcc U Eja Nsng Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, cleaned, and oil-free Air Consumption: approximately 20 NL per cycle Maximum Feed Pressure: 8 bar Noise Emission Value: less than 80 db/A Machine: see layout Operating Side: right in direction of conveyor Control Cabinet: fixed on the left side of the machine Paint: Machine 7032, grey Black-yellow Roller Conveyor Height: 900 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, With documentation and some accessories; on-site inspection is possible, but not under power. Hjdpferl Rbvsx Aa Nong

Tahun pembuatan: 2000, Kondisi: baik (bekas), en_001 Hnedpspygwqsfx Aa Nog

Kondisi: bekas, TECHNICAL DATA - Number of axes: 48 - Number of stations: 16 - Number of units: - Number of horizontally possible units: 16 - Number of vertically possible units: 7 - Max. diameter: 45 [mm] - Max. workpiece diameter: 150 [mm] - Base unit GM50/150: * Stroke Z: 150 [mm] * Spindle power: 5 [kW] * Spindle speed: 0 - 8,000 [rpm] - Slides X/Y: * Stroke X: +/- 40 [mm] * Stroke Y: +/- 20 [mm] - Dimensions: 14,000 x 4,800 x 3,000 [mm] - Weight: 13 [t] - Operating hours: 4,283 [h] ACCESSORIES - CNC control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing unit 52/100, 3 axes - Station 2: * Slide 50/150 (manual control) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * ICS (internal coolant supply) - Station 3: * Slide 50/150 (manual control) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) Hnjdpfju N Ivqsx Aa Nsg * ICS - Station 4: * Slide 50/150 (manual control) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * ICS - Station 5: * CNC slide 50/150 ref. 22.10.001-4 (2 axes) * CNC unit 50/150 ref. 22.42.001-6 (with CNC rotary function) * ICS - Station 6: * CNC slide 50/150 ref. 22.10.001-4 (2 axes) * CNC unit 50/150 ref. 22.42.001-6 (with CNC rotary function) * ICS - Station 7: * Slide 50/150 manual control ref. 22.10.002.1 * Recessing unit ref. 22.42.041.1 - Station 8: * CNC slide 50/150 ref. 22.10.001.4 (2001) * CNC unit 50/150 ref. 22.42.001.6 (with CNC rotary function) - Station 9: * CNC slide 50/150 ref. 22.10.001.4 * Sawing unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual control ref. 22.10.002.1 * Sawing unit ref. 22.42.039.8 - Station 11: * CNC slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC rotary function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing unit ref. 22.42.041.1 - Station 13: * CNC slide 50/150 ref. 22.10.001.4 * Sawing unit ref. 22.42.041.1 - Station 14: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (rotary function) - Station 15: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (rotary function) * ICS - Station 16: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (rotary function) * ICS - Bar loader magazine, length 4 meters - Coolant tank KNOLL (2,000 liters) with high-pressure pump HP 60 [bar] - Chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, de-001 Hnsdpfew Nykmjx Aa Njg