Beli Idra bekas (541)

Kondisi: baik (bekas), Tahun pembuatan: 2020, Mașină de turnătorie pentru aluminiu, IDRA 320PRP Refabricată de Ontogepszerviz în anul 2020 Stare bună de funcționare DISPONIBILĂ PENTRU VÂNZARE ÎNCEPÂND CU 1 SEPTEMBRIE 2025 Pgodpjwpr Ufsfx Ab Hou CONDIȚIA DE VÂNZARE ESTE EXW – DEZASAMBLAREA ȘI TRANSPORTUL NU SUNT INCLUSE ÎN PREȚUL DE VÂNZARE

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1982, Clamping force: 300 t, platen size X/Y: 880 mm / 880 mm, piston stroke: 400 mm, column diameter: 100 mm, ejector force: 18 t. Height adjustment: 200 mm, distance between columns X/Y: 555 mm / 555 mm, mold height min./max.: 200 mm / 650 mm, mold opening stroke: 540 mm, max. casting weight: 5.2 kg. Dimensions X/Y/Z: approx. 6150 mm / 1950 mm / 2615 mm, weight: approx. 16,000 kg. This machine is intended for use as a spare parts donor. Control system, electrics, and paintwork must be renewed. On-site inspection is possible. Pgedpfxstt Dybo Ab Hsu

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C1403, Mașină de turnătorie pentru aluminiu, IDRA 280 TONE REFĂCUTĂ DE TECNOPRESSE ÎN 2017 În stare bună de funcționare Podpfx Aewpr N Ajb Hsgu DISPONIBILĂ PENTRU VÂNZARE ÎNCEPÂND CU 1 SEPTEMBRIE 2025 CONDIȚII DE VÂNZARE: EXW – DEMONTAREA ȘI TRANSPORTUL NU SUNT INCLUSE ÎN PREȚUL DE VÂNZARE

Kondisi: bekas, New: Yes Please contact us for further information. Pgsdpfx Abowf H Sqj Heu

Kondisi: bekas, The press is extremely stable thanks to its heavy, fully welded steel construction. The working table of the press can be easily raised and lowered to any position using hydraulic drive. Additional tools are included, and it is also possible to use your own tools. Pgedpfxougtv Is Ab Hju Specification: - Capacity: 250 t - Year: 1991 If you have any further questions, we will be happy to answer them.

Tahun pembuatan: 2020, Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: DF0317, Pressure: 400 t Passage width: 600 mm Stroke: 400 mm Machine weight approx. (without operating fluids): 14 t Dimensions L x W x H: 2380 x 1680 x 3580 mm Motor power: 36 kW Max. working height: 750 mm Max. feed speed: 10 mm/sec Pressing speed: 10 mm/sec Column diameter: 230 mm Return force: 40 t Rapid traverse speed: 25 mm/sec Travel distance: 500 mm Oil tank: 600 l Pgsdpfed E Irhsx Ab Hju Oil cooling: 1.5 kW Conveyor belt length: 6 m Monitor: WEG 12 inch Light barriers front and rear: 6800 ? Side paneling: 4200 ? Speed upgrade to 80 mm/sec.: 19000 ? Each additional meter of conveyor belt: 850 ? Steel quality: Engineering steel LCG ASTM A36, manufactured according to DIN 8651 All components that come into contact with salt are made of stainless steel

Tahun pembuatan: 2020, Kondisi: hampir baru (bekas), Pressure: 150 t Stroke: 500 mm Approx. machine weight (without operating fluids): approx. 8.5 t Pededxvfispfx Ab Hegu Dimensions (L x W x H): 1200 x 1800 x 3100 mm Motor power: 10 kW Max. working height: 1000 mm Max. feed speed: 9.9 mm/sec Pressing speed: 100 t = 9.9 to 0 mm/sec Table height above floor level: 1000 mm Lubrication for guides: grease nipples Column diameter: 230 mm chrome-plated Return speed: 25 mm/sec Hydraulic tank: 500 l Oil requirement: approx. 400 l Perimeter maintenance platform: 5800 ? Enclosed side panels left and right: 3900 ? Rear enclosed: 2800 ? Front light curtains for higher speed, only with maintenance platform and rear closed: 4800 ? Tripling of speed, only with maintenance platform, enclosed sides and rear: 29000 ? Siemens S7 1200, monitor control with 12" monitor and Pilz safety technology: 8200 ? Steel quality: LCG engineering steel ASTM A36, manufactured in accordance with DIN 8651 All parts in contact with salt are made of stainless steel.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, We offer a hydraulically operated spotting press with 40 tons of pressing force, available for immediate delivery. Due to a change in warehouse location, this press is being offered at a very attractive price. Press force: 40 t Table length: 1000 mm Table width: 700 mm Machine weight: approx. 9 t Space requirement: approx. 4000 x 4400 x 1800 mm Stroke length: 1050 mm Installation height: 1200 mm Table rotatable by 180 degrees Max. table load: 5 t Advance speed: 100 mm/sec Return speed: 100 mm/sec Working speed adjustable from 0 to 10 mm/sec Main cylinder: 1 unit Table extendable by 1050 mm Table tiltable up to 50 degrees Upper tool foldable by 180 degrees Table traverse speed: 25 mm/sec Press force, travel and speed adjustable via monitor control Robust machine body with solid welded construction, produced to DIN 8651 for low-maintenance and reliable operation via heavy-duty engineering Maintenance balcony with marine ladder Complete travel area secured by Sick light curtains Table extends forward from the machine and can be tilted up to 45 degrees upon request Control cabinet on the left side of the machine Monitor control with 200 memory slots REMOTE function for remote maintenance Operating manual, technical documents, and documentation in German CE certificate SIEMENS 9" monitor Motors by WEG Hydraulics by Bosch Rexroth Internal illumination Operator panel on a swing arm Two-hand operation on a movable stand USB interface for data transfer Control system by Siemens Sick light sensors, 1250 mm Platen hydraulically foldable, swivels up to approx. 175 degrees Columns and cylinders are made from tool steel SAE 1045 (identical to DIN C45), induction-hardened and chrome-plated on the exterior. The linear encoder continually informs the control system of the ram position. Travel distance, upper stop, switch-over point (where the press changes from rapid approach to working speed), and the desired end position can be easily and quickly entered via the monitor control. Working speed can be set in 1 mm/sec increments from 0 to 10 mm/sec and in 10 mm/sec steps from 10 to 155 mm/sec. Podpfxjhtm E No Ab Hsgu The control system monitors protected areas as well as the entire hydraulic circuit and pump. The control unit is housed in a separate control cabinet. The press itself is operated via a control panel mounted on a swivel arm, allowing for reduced operator movement.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, nomor mesin/kendaraan: NEBR-4397, Here are the technical specifications of the machine on offer: If the press does not exactly match your requirements, you can request an individual quote tailored to your needs with just one click: Contact us for a customised offer. HIDROBRASIL manufactures presses precisely according to your specifications at surprisingly attractive prices! ##### Technical Details Pressure: 15 t Technology Stroke: 160 mm Machine weight: approx. 330 kg Pgedpfx Abjfhcc Io Hou Oil tank: 10 l Robust machine frame with solid welded construction, manufactured in accordance with DIN 8651 ##### Additional Information Thanks to durable engineering, low-maintenance and reliable Cylinder with induction hardening and chrome plating Steel quality: structural steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 t rotary mandrel attachment, mechanical, with locking mechanism, spline shaft and brake, offering 220 mm travel Hydraulic hand pump with max. 15 t pressure and 160 mm travel, with return spring Throat depth from rear wall to centre of tool holder: 280 mm Assembly table can be swivelled 180 degrees to the right, featuring a 60 mm centre bore, M12 T-slots Clearance height between swivel table and ram/rotary mandrel guide: 450 mm Clearance height up to the additional table (insertable): 650 and 800 mm Additional table with central bore, 60 mm (insertable), M12 T-slots, size 270 x 200 mm Base height with two compartments for additional table: 750 mm On the cylinder, a hardened pressure plate with a diameter 10 mm larger than the cylinder Tool holder M30 in the cylinder head Pump lever operated from top to bottom Oil tank for 10 l hydraulic oil AW 46 Machine frame finished in blue, RAL 5012, textured paint Attachment parts finished in anthracite, RAL 7021 Hydraulic single-column combination press as special machine, 15 tonnes, manual operation (C-frame press, hydraulic press) ##### Are you looking for a customised machine? Contact us for a tailored quote. Our hydraulic presses are built in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they are fully compliant with the national Brazilian safety directive NR 12, which is based on the former. Our major strengths are special-purpose machine manufacturing and press automation. We supply tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly low prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0149, Pressure: 2x 75 / 150 t Clear passage width: 2050 x 965 mm Pgsdpfx Absd Aftps Hou Stroke: 800 mm Total power requirement: main motor 22 kW Machine weight approx.: 6.5 t Space requirement approx.: 1500 x 1025 mm Lower ram: 150 mm Upper ram: 150 mm Base plate (steel): 72 mm Additional motors and consumers: 2 kW Ram size, upper ram approx.: 870 x 350 x 150 mm Ram size, lower ram approx.: 1500 x 600 x 150 mm Base plate: 1500 x 1025 x 75 mm Top plate: 1500 x 1025 x 150 mm Guide column diameter: 120 mm Piston diameter: 80 mm Oil tank: 350 l Oil requirement: 320 l Travel path of both lifting cylinders and the pressure cylinder each: 350 mm Max. open height: 1600 mm Pressing speed: 15-0 mm/sec Lifting speed: 100 mm/sec Window size approx.: 2050 x 965 mm Wall thickness approx.: 6 mm Position control accuracy via contactless sensors: 0.5 mm The press is equipped with two column guides, each 120 mm in diameter, guiding both the lower and upper rams. The guides are made of bronze. The lower ram features a robust design with a thickness of 150 mm. The upper ram is also equipped with a 150 mm thick steel plate. The machine's base plate is made of 72 mm thick steel, providing tilt-stability during transport. For this reason, the oil tank with the hydraulic system is also mounted near the base. Both hydraulics and electronics are permanently integrated into the machine and protected from contamination by an enclosure. To dissipate the resulting heat, the machine is fitted with an oil cooler mounted on top of the press. The control cabinet is also air-cooled. For potential future maintenance of the hydraulics, the press's rear interior wall can be easily removed. The two-hand control is securely fixed to facilitate transport but remains movable via a joint. High-resolution light barriers prevent entry of personnel into the hazardous area. To ensure comfortable operation, the machine is equipped on both sides with transparent acrylic windows, 6 mm thick, which may be replaced with new panels after several years of use, though this incurs minimal cost. Additionally, the press features four high-power LED lights integrated into the upper plate.

Kondisi: bekas, nomor mesin/kendaraan: DF0139, Pressure: 30 t Passage width: 1000x1000 mm Stroke: 800 mm Total power requirement: 3 kW Machine weight approx.: 5 t Space requirements approx.: 3360x1300x1360 mm Return force: 3 t Column diameter: 75 mm Downward travel speed: up to 200 mm/sec. Pgsdpfsfxykhex Ab Hju Maximum pressing speed: 0-10 mm/sec Return speed: 200 mm/sec Table height above floor approx.: 900 mm Max. distance table - ram: 1000 mm Cylinder diameter: 126 mm Piston diameter: 71 mm

Tahun pembuatan: 2017, Kondisi: bekas, Pressure: 500 t Pass-through width: 1300 x 800 mm Stroke: 600 mm Approx. machine weight: 18 t Space requirement approx.: 2400 x 2400 x 5500 mm Return force: 50 t Operation: Two-hand control Cylinders: 1 piece Motor: 50 kW Oil cooling: electric Column diameter: 200 mm Working height (distance between ram & table plate): 700 mm Table size: 1900 x 800 mm Table height above floor approx.: 1000 mm Ram plate: 1300 x 800 mm Approach speed: 150 mm/sec Working speed: 5–10 mm/sec Return speed: 150 mm/sec Oil tank: 1500 l Oil quantity: 1400 l Control system functionality: Pedpfsd E Irmox Ab Hjgu The linear scale continuously communicates the position of the ram and ejector to the control unit. The travel path, upper stop point, and the switching point at which the press changes from rapid traverse to working speed—along with the target end position—can all be easily and quickly input via the monitor control. The working speed can be set in 1 mm/sec increments from 2 to 15 mm, and in 10 mm increments from 15 up to 150 mm. Additionally, the machine features pressure monitoring, which can either automatically return the ram to the upper position upon reaching the desired pressure, or maintain pressure at the set value (with ±5% tolerance) for a configurable time before opening. The control system monitors all safety zones, the complete hydraulics, the pumps, and the temperature. It also controls the synchronization of the main cylinders and compensates for uneven loads accordingly. The control is housed in an attached electrical cabinet. Operation of the press itself is performed via an adjustable two-hand control, reducing operator movements. Further information: Included in the offer are detailed 3D drawings, which must be checked and approved by the customer. Columns and cylinders are made of tool steel, induction hardened and chrome plated on the outside. Ram guides are manufactured using bronze sliding bushings. Scope of delivery includes: ? Manuals and operating instructions for the motors, pumps, and the press itself, as well as the CE Declaration of Conformity (each in duplicate) ? Safety inspection by a qualified company ? The machine complies with the EU Machinery Directive 2006/42/EC for hydraulic presses and with DIN EN 693/2011

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: Pedpfx Aofxyhfsb Hogu The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, nomor mesin/kendaraan: 4396, en-GB-1 Pgodsfxyh Ajpfx Ab Hsu

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 4303, Pressure: 500 t Passage width: 2100 x 1500 mm Stroke: 1000 mm Total power requirement: 62 kW Approx. machine weight: 39 t Dimensions (L x W x H): 5100 x 2800 x 4040 mm Retraction force: 40 t Main cylinders: 2 units Column diameter (main cylinders): 360 mm Table size: 2100 x 1500 mm with T-slot Ram size: 2100 x 1500 mm Table height above floor approx.: 850 mm Approach speed: 300 mm/sec Return speed: 300 mm/sec (with 20T ram weight) Pressing speed: 200T = 28 mm/sec Oil tank: approx. 1000 l Auxiliary cylinders: 2 units Column diameter (auxiliary cylinders): 120 mm Total table plate size: approx. 2750 x 1600 mm Total ram plate size: approx. 2750 x 1600 mm Pressing speed: 300T = 20 mm/sec Pressing speed: 500T = 6 mm/sec Ram retraction force: 40 t Control circuit voltage: 24 V Voltage: 400 V Frequency: 50 Hz Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min Installation height (distance worktable – ram plate): 1500 mm Hydraulic manifold: REXROTH Pressure control: via PLC (minimum pressure 50T) Cylinders: 4 x ?90 x 70 mm Stroke length: 300 mm, adjustable via PLC Ejector, approach speed: 95 mm/sec Ejector, return speed: 240 mm/sec Capacity: 4 x 15T at 250 bar Pressure setting: via monitor from 50-500T Pressure holding time: 0-900 sec Hydraulic tank: 2000 l Control system: Siemens S7 300 Storage capacity: 200 programs Electronics by German manufacturers: SIEMENS/MÖLLER Control panel: on swivel arm Sick light sensors: 1500 mm at front side Control function: The linear scale provides the control system with the position of the ram and the ejectors at all times. The travel path, the upper stop, and the switching point (where the press switches from rapid traverse to working speed) as well as the target end position can be easily and quickly entered via the monitor controls. Working speed can be set in increments of 1 mm/sec from 0 to 10 mm/sec and in increments of 10 mm from 10 to 300 mm/sec. Additionally, the machine is equipped with pressure monitoring, which can either retract the ram as soon as the desired pressure is reached or maintain the pressure for the pre-set time (with 5% tolerance) and then open. The control system monitors the protected areas, all hydraulics, the pumps, and the temperature. It also monitors the parallelism of the main cylinders and compensates for unilateral overload. The control system is housed in a separate control cabinet. Operation of the press is via a control panel mounted on a swivel arm, reducing operator movement. Additional equipment: Polycarbonate glass 8 mm, inside at rear door Polycarbonate glass 8 mm, at side doors and within the working area Liquid run-off channel, 25 mm radius, at front, rear, and sides of the table Pgjdpfx Abjdyynvs Hju Special features of the press: Including 10% reserve (max. capacity 550 t) Steel quality: Stainless steel LCG ASTM A36, manufactured according to DIN 8651 Motor and pump switch off as soon as the tool is closed and automatically recalibrate at 5% pressure drop (significant cost savings) Nitrogen compression system: Supplied with a nitrogen compression unit that can generate a sudden pressure of 280 bar and can be switched on and off as needed.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, Pressure: 63 t Table length: 700 mm Table width: 1000 mm Machine weight approx.: 9 t Pjdpfx Ajffamqsb Hsgu Space requirements approx.: 4500 x 4300 x 2700 mm Main cylinder: 1 unit Stroke length: 1200 mm Installation height: table/ram top: 1200 mm Table height: 700 mm Table extendable: by 1200 mm Table tiltable: by 45 degrees Upper tool foldable: by 170 degrees Clearance between columns: 1250 x 1000 mm Max. table load: 5 t Table traverse speed: 25 mm/sec Advance speed: 95 mm/sec Return speed: 80 mm/sec Working speed adjustable: from 0 to 10 mm/sec. The linear scale continuously communicates the ram position to the control system. The traverse path, the upper stop position, and the switching point at which the press changes from rapid traverse to working speed, as well as the target end position, can be easily and quickly entered via the monitor control. Working speed can be set in 1 mm/sec increments from 5 to 10, and in 10 mm increments from 10 to 95 mm. The control monitors the secured areas, the entire hydraulic system, and the pump. The control is housed in a separate control cabinet.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, nomor mesin/kendaraan: 4293, Pressure: 40 t Table length: 1000 mm Table width: 700 mm Installation height (distance between working plate and ram plate): 1200 mm Number of cylinders: 1 unit Stroke length: 1200 mm Table height above floor: 700 mm Extendable table: 1200 mm Table traverse speed: 25 mm/sec Table tilting: 45 degrees Maximum table load: 5 t Upper tool foldable: 170 degrees Distance between columns: 1250 x 1000 mm Maximum approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed: 0 - 10 / 10 - 155 mm/sec Dimensions (L x W x H): 4300 x 2700 x 4500 mm Total weight (without operating materials): 8.5 t Siemens monitor: 9 inch Sick light sensors: 1200 mm The columns and cylinder are made of tool steel SAE 1045 (equivalent to German standard C 45), hardened by induction and chrome-plated on the outside. Control system functionality: Pgsdedxrqxjpfx Ab Hju The linear encoder continuously provides the control system with the ram position. The traverse path, upper stop point and switching point (where the press transitions from rapid traverse to working speed), as well as the target end position, can be entered quickly and easily via the monitor control unit. The working speed can be set in 1 mm increments from 0 to 10 mm/sec and in 10 mm increments from 10 to 155 mm/sec. The control system monitors all safeguarded areas, the complete hydraulics, and the pump, and is housed in a separate control cabinet. The press itself is operated via a control panel mounted on a swivel arm, minimizing walking distances. Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself - CE Declaration. The machine complies with the EU Machinery Directive 2006/42/EC. Hydraulic presses

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Clear passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight approx. 27.5 t Dimensions (L x W x H) approx. 3950 x 2200 x 4850 mm Retraction force 40 t Main cylinders 2 units Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Pedpfjin Et Nex Ab Hjgu Table height above floor approx. 900 mm Forward travel speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil volume 1200 l Adjustable pressure control from 50 - 400 t Drawing cushion 1400 x 800 mm Drawing unit force 30 - 60 t Drawing cushion stroke 250 mm Drawing cushion speed 5 - 80 mm/sec Robust machine frame with solid welded construction Low maintenance and reliable Piston rod with induction hardening and chrome plating T-slots available as per customer specification or, if not specified, 22 mm as per DIN CE certificate Manufactured to EU standards Operating manual, technical documentation, and paperwork in German Construction steel LCG ASTM A36 T-slots in table and ram as per DIN 650-22 Travel distance control adjustable via monitor Light sensors front and rear: Sick, 1300 mm Hydraulic components by Bosch Rexroth Monitor: Siemens 12 inch Wall-mounted control cabinet Press interior illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: reduces pump stand-by consumption to approx. 2 kW Remote access for remote servicing Two-hand operation on movable stand Further information: Pressure build-up up to 400 t within max. 4 seconds after tool closure Left side of press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic, or fully automatic

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, nomor mesin/kendaraan: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t Space requirement approx.: 8800 x 1800 x 2200 mm Pressure adjustment via rotary dial, infinitely variable: 15-150 t Cylinder diameter: 100 mm Pressing speed (infinitely adjustable via joystick): 0-9.9 mm/s Servo motor: 2 kW Cooling unit: 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two hydraulic cylinders. The straightening machine is prepared for the respective material type by using interchangeable rounded spacer elements. The 10 inserts are changed manually by simply sliding them into the retaining grooves. A basic set for one profile is included in the scope of delivery. The program for the relevant profile is then selected on the monitor. The monitor displays the ideal line and an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a support, and securely clamped with a quick-clamping device. Both the support and the quick-clamping device are quickly adjustable and mounted on a clamping plate. This clamping plate travels on a linear guide from left to right and vice versa. Transportation is via a chain drive powered by a servo motor. Movement is initiated via a joystick at the control panel. Once the profile is clamped, the operator moves the clamping plate into the press using the joystick. The travel speed is up to 100 mm per second, but can be infinitely reduced to 10 mm per second. For this, it is sufficient to gently release the control lever. A high-resolution camera now shows the profile in the press. The operator can clearly see any deviations from the ideal line. Depending on requirements, the operator presses or pulls the profile until the desired accuracy is achieved. Subsequently, the operator continues slowly through the press while monitoring on the screen in detail whether the profile is now straight. If necessary, the operator can move forwards or backwards to make further adjustments. Once straightened, the profile exits the press to the right and can be removed. The clamping plate can then be returned to the loading position on the left or loaded from the right to save time. Pgodpfx Aofxygweb Hju Operation of the press is only permitted under the following conditions: Permitted ambient temperature: 5-60 °C Permitted relative humidity: at 20°C – 90%, at 40°C – 50% Height of installation location above sea level: +1000 m Permissible mains voltage fluctuations: +/- 10%

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 4273, Pressure: 110 t Table length: 1,200 mm Table width: 1,000 mm Max. stroke: 1,150 mm Dimensions (L x W x H): 4,200 x 2,400 x 4,800 mm Return force: 11 t Max. stroke: 1,150 mm Weight: 16 t Table travel: 1,200 mm Swivel table: 45 degrees Max. table load: 12 t Movable table speed: 25 mm/sec Table swivel speed: 10 mm/sec Drive power: 23 kW Voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Return speed: 130 mm/sec Rapid traverse speed: 195 mm/sec Machine color: Grey RAL 7035 Pgodpsd Ap Ugjfx Ab Heu Movable component color: Orange RAL 2009 Other component color: Dark grey RAL 7021 Oil tank: 400 l Recommended oil: DIN HLP / ISO VG 46

Kondisi: baru, Tahun pembuatan: 2019, Pressure: 275 t Distance between uprights: 3,000 mm Total power requirement: 30 kW Approx. machine weight: 40 t Retracting force: 27 t Max. pump capacity: Axial pump with proportional valve Bridge travel: 6,000 mm Lateral cylinder travel range: max. 3,000 mm Table size: 6,000 x 3,000 mm Table height above floor approx.: 700 mm Max. distance from table to ram: 1,100 mm Oil tank: 450 l Bridge traverse speed (X and Y): 30-33 mm/sec Cylinder lowering speed: 2-10 mm/sec Cylinder stroke speed: 2-50 mm/sec Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder traversed by servomotor via rack and pinion: 40 mm Control system: Siemens S7 1200 Monitor: Siemens 9", Touch Panel Podpfx Ajfxyigsb Hjgu Control console: portable

Kondisi: baru, Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0152, Pressure: 80 t Stroke: 500 mm Total power requirement: 12 kW Approx. machine weight: 5.1 t Operation: Two-hand control Cylinders: 1 Working height: 800 mm Working area: 800 x 800 mm Table size: 800 x 800 mm Ram plate: 2800 x 1300 mm Table height: 800 mm Approach speed: 9.8 mm/sec Working speed: 9.8 mm/min Return speed: 18 mm/sec Travel distance: 700 mm Column diameter: 75 mm Deep drawing function motor: 10 kW Main motor: WEG 15 kW Pump: REXROTH, Parker electronic axial piston pump kW Deep drawing cushion force: 25 t (at 280 bar) Deep drawing cushion stroke: 200 mm Deep drawing cushion rod diameter: 30 mm Deep drawing cushion travel speed: 80 mm/sec Hydraulic block: REXROTH/Parker Hydraulic valves: REXROTH/Parker Hydraulic tank: 300 L Hydraulic tank oil requirement: approx. 250 L Pjdpfxsfxyh Hj Ab Hsgu Hydraulic pressure regulation: via PLC (minimum pressure 10 t) Hydraulic air cooling: for oil cooling, with electric fan Hydraulic lubrication for guides: manual, via lubrication nipples or cartridges Electronic components: SIEMENS / MOELLER Control panel: on swivel arm Control: automatic via two-hand operation with key switch, manual via operator panel in setup mode Operation: movable two-hand control USB interface: for data transfer Remote monitoring: Siemens for remote maintenance Spacer sensors: for stroke length adjustment Pressure hold: 0–10 sec. Oil tank: 150 L Schmersal light curtains: 800 mm long, front and rear, 300 mm diagonally at the bottom

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, Pressure: 160 t Stroke: 600 mm Total power requirement: 7.5 kW Machine weight approx.: 7 t Return force: 16 t Main cylinder: 1 unit Column diameter: 160 mm Installation height: 800 mm Table area: 1200 x 800 mm Column distance (lateral): 400 mm Table height: 850 mm Max. table load: 5 t Forward speed: 1 to 9.8 mm/sec Return speed: 1 to 9.8 mm/sec Pgedpfjfxyi Iox Ab Hsu Oil quantity AW 46: 220 l

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0052, en-GB: Pressure: 200 t Column spacing: 1200x1000 mm Stroke: 600 mm Total power requirement: 32.5 kW Machine weight approx.: 20.5 t Space requirement approx.: 4000x2600x5000 mm Return force: 20 t Main cylinder(s): 1 unit Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Axial piston pump: BOSCH/REXROTH Pedsfxyiropfx Ab Hsgu Installation height (distance between worktable and ram plate with retracted cylinder): 800 mm Table and ram plate: 1200x1000 mm with T-slots as per customer requirement, DIN 650-22 mm Working height: 1100 mm Approach speed: 170 mm/sec Return speed: 150 mm/sec Pressure phase speed: 15 mm/sec Hydraulic block: REXROTH Oil requirement: 500 l Pressure control: via PLC (minimum pressure 20 t) Oil cooling: electric Socket: 220 V (in control cabinet) Storage capacity: 200 programs Pressure adjustment: via monitor from 20–200 t Operation: mobile two-hand operation Setting mode speed: 2–10 mm/sec Pressure holding time: 0–10 sec

Kondisi: baru, Pressure: 400 t Column clearance: 3400 mm Stroke: 500 mm Pgedpfofhcc Rox Ab Heu Total power requirement: 55 kW Machine weight approx.: 49 t Retraction force: 26 t Max. pump capacity: 131 l/min Dimensions (L x W x H): 7,900 x 5,500 x 4,300 mm Bridge travel path: 5000 mm Lateral travel range of cylinder: 2800 mm Table height above floor approx.: 700 mm Max. distance table to ram: 1000 mm Oil tank: 700 l Bridge travel speed: 0–33 mm/sec Cylinder lowering speed: 0–10 mm/sec Cylinder stroke speed: 0–25 mm/sec - Reinforcement of the table in the front area to 1,500 mm (additional weight approx. 4,000 kg) - Protective covers for the two motors that move the bridge - Signal lamps left and right equipped with protective casings - Galvanized grating inside the tray, flush with the upper edge