Beli Illig bekas (30)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, jam operasional: 41.685 h, Technical Data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. forming depth/negative, mm: 100 Cycle rate/min - max.: 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Heat to be dissipated: with top heating approx.: 10,260 KJ/h with top and bottom heating approx.: 17,715 KJ/h Godpoq A Um Rsfx Ah Robi Special features: Hollow-bottom fixture available Control cabinet: included

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 80.188 h, nomor mesin/kendaraan: 322, Maximum film width 700-800 mm Equipment / further details: - GREINER STACKING / Transfer unit R3 (Ref. no.: 95002.24) // Machine no.: 00020 // Year of construction: 1998 Gbjdpfx Aeq Nn Hcsh Rei Top and bottom heating Material: PS and PP were processed 450 Ps // 350 Pp The following tools have run on the machine: 8-cavity tool Ø95 and 15-cavity tool Ø73 and 15-cavity tool Ø86 Primarily packaging for the dairy industry was produced. Cycle rates are between 18-25 cycles per minute – depending on cup weight.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, illighsa30rd01 Gsdpfx Ahoylbrks Robi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1126, lebar film: 540 mm, jenis arus masuk: tiga fasa, lebar total: 1.710 mm, panjang total: 3.070 mm, tinggi total: 2.520 mm, berat keseluruhan: 838 kg, daya: 1,9 kW (2,58 hp), Perlengkapan: Pelat tipe tersedia, Mesin skinpack, mesin pengemasan, mesin thermoforming, mesin pembentukan vakum -Pabrikan: Illig, mesin skin pack tipe SK 74c -Lebar film: 540 mm -Konveyor rol: masing-masing maksimal 1000 x 560 mm -Meja kerja: dimensi lihat foto -Daya motor total: 1,9 kW Gbsdjft Sccepfx Ah Rji -Daya pemanas total: 8,9 kW -Dimensi: 3070/1710/H2520 mm 838 kg -Aksesoris: termasuk 8 roll film Ø290 x 540 mm 276 kg -Dimensi transportasi: 1710/1070/H2520 mm / 1200/800/H700 mm -Berat total: 1114 kg + 500 kg film

Kondisi: diremaj di bengkel (bekas), Maximum forming area: 960 x 660 mm Minimum forming area: 210 x 170 mm Maximum sheet size: 1000 x 700 mm Minimum sheet size: 310 x 210 mm Maximum sheet thickness (manual loading): 12 mm Maximum sheet thickness (automatic loading): 10 mm Maximum tool height: 490 mm Maximum draw depth: 300 mm (pos./neg.) Total connected load approx.: 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control system, Panel OP 37 - Air-conditioned control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for top heater - Individual emitter control for bottom heater - Parallel clamping frame - Pneumatic motor locking for upper reducing frame - Cylinder locking for lower reducing frame - 4 cooling fans - Adjustable vacuum for undermount via cascade control - Adjustable pre-blow / demoulding via cascade control - Large front access for tool change Godpfxswf Dvao Ah Rsbi - Sag control for film via photocell with support air - Automatic tool changing system Undermount: 1. Tool clamping via vacuum 2. Tool change via pneumatically actuated ball rollers Upper plunger: 1. Motorised remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Sheet feeding: - Automatic motorised lifting of the film transport chain - Pneumatic quick-release system for suction plates - Motorised centring of plastic sheets - Separate vacuum pump for textured material Optional retrofitting preheating: - Top heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch - Bottom heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch - Independent temperature control for top and bottom heater via separate controllers in the BE control cabinet (temperature not adjustable via UA operator panel) Optional retrofitting for roll feed: - Cross-cutter and infeed rollers at sheet feeder - Roller stand RO 800

Kondisi: diremaj di bengkel (bekas), Plate size: 1000 x 1500 mm Gedpfxewf D R Re Ah Rsbi Forming area: 960 x 1460 mm Draw depth: 600 mm If you would like more details or a quotation, please feel free to contact us.

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, lebar film: 1.500 mm, en-001 Gedpfjft S Easx Ah Rjbi

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Data teknis: • Meja putar 4 stasiun • Maks. luas penyegelan 350 x 250 Gsdpfx Ajfua Dcsh Rjbi • Maks. kedalaman blister 70 – 100 mm tergantung jenis produk • Gaya penyegelan 12.800 N • Daya pemanas penyegel 1,75 kW • Penyuplai karton • Penyekat kemasan • Unit pembentuk karton • Kabel dengan steker CEE 16A • Berat sekitar 750 kg Mesin tersedia dalam semua varian b, b-2, b-3, b-4.

Kondisi: bekas, Fungsionalitas: belum diuji, This Illig SB 74 D is being offered for sale; it is suitable for skin packaging, but not for blister applications. Gbodjwpvbpopfx Ah Roi Please request technical specifications separately.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Plate size: 2000 x 1000 mm Moulding area: 1960 x 960 mm Gbedpfx Ahjwf Ebwe Rsi Drawing depth: 600 mm If you would like further details or a quotation, please feel free to contact us.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, ILLIG Universal Thermoforming Machine Tipe UA 155 4g solo Data Teknis - Kontrol Siemens - Ukuran material maks.: 1500 x 1250 mm - Luas pembentukan maks.: 1450 x 1200 mm - Tinggi alat maks.: 700 mm - Ketebalan material maks.: 12 mm - Daya pemanas: 96 kW - Daya total: 105 kW - Pengaman listrik: 160 A - Kapasitas pompa vakum: 250 m³/jam - Kebutuhan udara tekan: 6 bar Gbsdpfjxlzqfox Ah Roi Perlengkapan - Pemanas atas dengan kontrol 5 zona HTS (700ºC) - Pemanas bawah dengan kontrol 5 zona HTS (500ºC) - Kipas pendingin D06 - Meja kaskade - Kaskade vakum - Punch atas - Termasuk pendingin ILLIG dan alat tempering ILLIG

Kondisi: bekas, Tahun pembuatan: 1998, ILLIG universal forming machine UA 155 4G + BE 155 P FHZ Technical specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Gjdpfsxlzrcjx Ah Rsbi Forming station: - Schleicher P03 control system - Automatic setup and removal function - Top heating: ceramic heater with 5-zone control - Bottom heating: ceramic heater with 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal beams for use with fixed format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Lower table pneumatic with rapid/traverse speed adjustable in percentage - Upper plug assist with rapid/traverse speed adjustable in percentage - Pre-blowing automatic, adjustable in percentage - Pre-vacuum adjustable in percentage - De-moulding automatic, adjustable in percentage - Sheet sag control via light barrier with supporting air - 6-fold cooling fan - Large front opening for tool change - Vacuum pump Sheet feeding: - Automatic sheet feeding device - Final heating in feeding for final or pre-heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Maximum forming area: 960 x 660 mm Minimum forming area: 269 x 444 mm Maximum sheet thickness (manual feed): 12 mm Maximum sheet thickness (automatic feed): 10 mm Maximum tool height: 450 mm Year of manufacture: 2000 Technical equipment of forming station UA 101 L: - Siemens control system with swiveling operator panel - Motorized travel movement of upper and lower heaters via rocker arm - Upper heater with 5 temperature control circuits using pilot burners - Lower heater with 3 temperature control circuits using pilot burners - Height-adjustable upper heater - Upper punch unit - Parallel clamping frame - Automatic window plate adjustment for lower frame - Automatic window plate adjustment for upper frame - Vacuum for lower table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening for tool change pneumatically locked - Sag control for film - Pre-blow control for film - Preparation for vacuum at upper punch - Tempering connection - Automatic tool change system, major setup - Vacuum pump Technical equipment of feeder BE 101 L: - Upper and lower preheating - Motorized travel movement of upper and lower heaters via rocker arm Godswf Dtxopfx Ah Rebi - Upper heater with 5 temperature control circuits using pilot burners - Lower heater with 3 temperature control circuits using pilot burners - Height-adjustable upper heater - Motorized parallel sheet transport - Sheet transport via spiked chain - Counter-guide for sheet via rollers - Automatic transport width adjustment - Motorized plate lifter with automatic tool clamping - Mobile plate loading cart Options (price on request): - Pyrometer in upper heater for temperature measurement on the film - Retrofit for roll processing

Kondisi: diremaj di bengkel (bekas), Top heating with small individual radiators via toggle switch Bottom heating with large radiator Top die system Protective grid 4 D05 cooling fans Pre-blow and demolding automation Gbjdpfx Ahefug Ane Rei

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Draw depth: 700 mm Godpfx Ahjwf Ea Tj Rsbi If you require further details or a quotation, please feel free to contact us.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical data: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Gbodpfxjwf Eb Rs Ah Rji Equipment: Forming station - Schleicher P03 control system - Automatic setup function - Top heating with ceramic heaters (500W) and 4-zone control - Individually selectable top heating elements, including lowering feature - Bottom heating with ceramic heaters (300W) and 4-zone control - Individually selectable bottom heating elements, including lowering feature - Storage for programs and heating settings - Clamping frame with quick-change system - Parallel upper frame, longitudinal beams for fixed format frame operation - Lower clamping frame for bottom frame installation, central clamping via electric motor - Lower table pneumatically adjustable with rapid/creep speed in 15 steps via control panel - Upper punch with rapid/creep speed adjustable in 7 steps - Vacuum pump with cascade control adjustable in 15 steps via control panel - Pre-blow feature adjustable by percentage - Pre-suction feature adjustable by percentage - Automatic demoulding feature adjustable by percentage - Sheet sag control via photoelectric sensor with support air - 8-way cooling fan with spray nozzle cooling - Large front opening for tool change Feeding system - Automatic sheet feeding device - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lift - Motorized transport width adjustment

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Draw depth: 600 mm Gsdpfx Ahswf D S Ue Rebi If you require further details or a quotation, please feel free to contact us.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 589-0263, de7f6d0c-0f51-4b35-9e6a-1f83e7ad8ebf Gbodpfeuzi I Ejx Ah Rsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Pembuat Illig Model RV 74 Tahun 1999 Jam Kerja Perkiraan TBC Tanggal Pengiriman Segera Stasiun Pembentukan, Pemotongan, dan Penumpukan Gedpfx Ajxp H Nujh Rebi Area Pembentukan Maksimal 700 x 500 mm Area Pembentukan Minimal 400 x 250 mm Kedalaman Tarikan Atas-Bawah 120 / 40 mm Ketebalan Material Maksimal 2,0 mm Kecepatan Siklus Maksimal 20 / menit Berat Total 6.600 kg Semua detail dapat berubah dan/atau terdapat kesalahan. Semua peralatan tergantung ketersediaan dan/atau telah terjual.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 29.750 h, Stasiun: Pembentukan, Pemotongan, dan Penumpukan Area Pembentukan Maksimal: 500 x 350 mm Area Pembentukan Minimal: 300 x 160 mm Lebar film: 540 mm Tinggi pembentukan di atas-di bawah level material: 100 / 40 mm Gbsdpfx Ahjw Rp Eie Rji Gaya penutupan cetakan maksimum: 55 kN Tekanan pembentukan: 2 bar Siklus/menit: 40 Total daya motor: 32 kW Total daya pemanas: 44,9 kW Arus terukur: 115 A Dimensi (P x L x T): 8,3 x 2,3 x 2,5 m

Kondisi: Pembawa suku cadang rusak (bekas), Manufacturer: Illig Model: HSA 50C The machine is incomplete and not operational! Gbedpfxsuk Dwfj Ah Rji For spare parts only!!

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1506, lebar film: 1.000 mm, jenis arus masuk: tiga fasa, tekanan: 6 batang, lebar total: 700 mm, panjang total: 1.000 mm, tinggi total: 350 mm, tegangan masuk: 400 V, ketebalan lembaran (maks.): 10 mm, kapasitas pemanasan: 30 kW (40,79 hp), berat keseluruhan: 1.500 kg, tinggi alat: 490 mm, Maschinentyp: ILLIG UA 100 G Maschinennummer: 1506 Baujahr: 1988 Gesamtgewicht: ca. 1,5 Tonnen Stromversorgung: 3x400V Gesamtanschlussleistung: 35 kW Gesamtheizleistung (Unter- und Oberheizung): 30 kW Heizplatten-Typ: Keramik Maximale Foliengröße: 1000x700 mm Minimale Foliengröße: 310x210 mm Maximale Folienstärke (Handbeladung): 12 mm Maximale Verformungsfläche: 960x660 mm Minimale Verformungsfläche: 270x170 mm Maximale Positivhöhe des Formteils: 350 mm Maximale Negativhöhe des Formteils: 350 mm Maximale Werkzeughöhe: 490 mm Gbjdpfx Ahswfdd De Rsi Die Maschine wurde ca. 2020 überholt. Das ursprüngliche Schleicher-Steuerungssystem wurde durch ein neues Omron-Steuerungssystem ersetzt. Außerdem wurden die Verkabelung und der Schaltschrank überholt.

Tahun pembuatan: 2006, Kondisi: baik (bekas), Illig SK 74-C from an assisted workshop Year of manufacture: 2006 Godpfx Aor Nv E Nsh Robi Serial no.: 426-0172 Includes 2 pallets with approximately 38 rolls of film Dimensions (approx. in mm): 2200 x 1600 x 1600

Kondisi: bekas, Tahun pembuatan: 1990, Verpackungsmaschine-Illig-SB53C-1990 Godpfxjxm Sa Hj Ah Rsbi

Kondisi: baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 191, jenis arus masuk: tiga fasa, tekanan: 10 batang, lebar total: 3.050 mm, panjang total: 2.400 mm, tinggi total: 3.480 mm, lebar kabinet kontrol: 850 mm, tinggi kabinet kontrol: 1.800 mm, panjang kabinet kontrol: 600 mm, This machine was overhauled in 2020, then installed at a customer's site, and has been used minimally, if at all. The machine is in excellent condition. It has been professionally disconnected and transported. Gjdowpfrkspfx Ah Rjbi