Beli Isel Cnc bekas (9)

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Sumbu X: 500 mm, sumbu Y: 230 mm, sumbu Z: 90 mm. Tidak ada cacat yang diketahui, telah dirawat secara berkala, tanpa aksesori atau suku cadang. Mesin sudah dibongkar. Inspeksi di lokasi memungkinkan, namun tidak tersambung listrik. Rodsw U Dwhspfx Ahvjn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.680 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 600 mm, tinggi total: 2.500 mm, panjang total: 2.700 mm, lebar total: 2.000 mm, jangkauan kerja: 1.680 mm, daya motor spindle: 2.200 W, jumlah lengan penjepit: 12, Perlengkapan: dokumentasi / manual, 4-Axis CNC Machining Center ISEL Sonderanlage - 06/2007 X1680 Y1000 Z600 - Spindle 2.2 kW / 15,000 rpm - Table 1660×1750 mm - 4th rotary axis Ø1660 L1750 mm - PC + MAYKA (on integrated PC) Ready for operation, can be viewed under power Location: Industrial area 06510 CARROS 4-axis CNC Machining Center/Milling Machine from ISEL (isel automation – Germany). Custom-built machine "Sonderanlage" (manufacturer’s plate), year 06/2007, serial no. 293215/1, CE marked. Machine mainly used for foam machining (precision applications), but this is a true CNC machining center: machinable materials depend primarily on tools and parameter settings. Dimensions: length 2.70 m - width 2 m - height 2.50 m. Operating hours counter not available in this configuration. Mayka software installed and functional on the PC. Last test on 13/01/2026: all movements OK. Can be inspected and tested onsite: axis travels + start-up possible. Chip extraction system included but not functional (needs servicing). Operating hours: not available (counter not accessible) Travels: X 1680 mm / Y 1000 mm / Z 600 mm Usable table size: 1660 × 1750 mm (T-slots/clamping) Rsdpfx Ajycqu Nehvsn 4th rotary axis included: Ø 1660 mm, length 1750 mm Drivetrain: ball screws + belts, linear guides Motors: servo drives Spindle: ISEL F8LI2S2/-8-043, 2.2 kW, 15,000 rpm, manual tool change Tooling included: 1 tool holder + 11 collets (spindle specific system) + clamping nut Cooling: air-cooled spindle + chiller included Safety: fully enclosed machine + emergency stop Noise level: approx. 50 dB during operation, 65 dB during Y-axis movements Power supply: 400V 3-phase, 16 A - compressed air not required Lubrication: none Control / PC / Software Electrical cabinet included Integrated PC + monitor + keyboard (Windows 7) MAYKA installed and fully functional on the PC (no separate dongle/USB key required) Maintenance / Service • March 2019: Computer replaced • March 2019: All drive belts replaced • March 2019: iCCE10 CANopen PCIe board (1 channel) replaced • Last check: 13/01/2026 - all movements verified OK Make: ISEL Model: Sonderanlage Year: 06/2007 Serial no.: 293215/1 Axes: 4 (with 4th rotary axis) Travels: 1680 × 1000 × 600 mm Table: 1660 × 1750 mm Spindle: 2.2 kW - 15,000 rpm Power supply: 400V 3-phase - 16A PC/software: Integrated PC + MAYKA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 135 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6693371/1, jarak pergerakan sumbu X: 1.480 mm, jarak lintasan sumbu Y: 1.090 mm, jarak gerak sumbu Z: 617 mm, tinggi total: 2.320 mm, panjang total: 2.800 mm, lebar total: 2.000 mm, jangkauan kerja: 1.480 mm, daya motor spindle: 3.600 W, diameter alat: 32 mm, Perlengkapan: dokumentasi / manual, CNC 4-Axis Machining Center ISEL FlatCom XL142/112 EC-Servo - 10/2017 X1480 Y1090 Z617 - 3.6 kW spindle / 17,750 rpm (ER32) - 135.53 h - 4th axis Ø600 L1000 - PC + remote Ready for operation, can be inspected under power Location: Industrial zone 06510 CARROS CNC 4-axis machining center / milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017, Serial no. 669371/1, CE-marked. Dimensions: length 2.80 m - width 2 m - height 2.32 m Machine in “as new” condition, very little use, fully tested OK. Hours: 135.53 operating hours / 144.04 hours under power Axes: 4 axes, with 4th rotary axis usable Ø 600 mm, length 1000 mm Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis) Table size: 1540 × 1500 mm – T-slots Transmission: ball screws – linear guides Drive: EC-Servo motors SPINDLE / TOOLING Spindle ISEL VKH75/26-75T: 3.6 kW, 17,750 rpm ER32 collet Pneumatic tool change (pre-equipped): tool magazine not included, but easily added (via supplier) 2 tool holders (1 mounted on the machine) Tool probe included Cooling: air-cooled spindle + chiller included Control / PC / Software ISEL control + REMOTE software License included and transferable No dongle/keys/codes required PC + monitor + integrated keyboard (Windows 7) WORKSHOP / SAFETY Power supply: 400V three-phase, 16A Compressed air required: yes, 8 bar (for pneumatic functions) Chip extraction: not included Lubrication: none Protective enclosure + emergency stop Noise level: approx. 50 dB max Dust extraction (connection provided): no Condition / Testing Condition: “as new”, no known defects (play, errors, sensors: none) Last test: 13/01/2026 All movements tested OK Included Machine + electrical cabinet PC/monitor/keyboard Software + license 4th rotary axis 2 tool holders + collets + clamping kit (Allen keys) Rodsycqm Eepfx Ahvon Some clamping accessories + tool probe End mills / drills included (lot visible in photos) Brand: ISEL Model: FlatCom XL142/112 EC-Servo Year: 10/2017 Serial no.: 669371/1 Axes: 4 + 4th rotary axis (Ø 600 / L 1000) Travel: 1480 × 1090 × 617 mm Table: 1540 × 1500 mm, T-slots Spindle: 3.6 kW – 17,750 rpm – ER32 Pre-equipped for pneumatic tool changer (ATC), magazine not included Power: 400V three-phase – 16A / Air: 8 bar Hours: 135.53 h / 144.04 h

Kondisi: baik (bekas), en-GB Rsdpfx Asxiy Udohvjn

Kondisi: baru, Features > 5-axis simultaneous CNC machine > Base structure made of polymer concrete > Wet/dry machining > Workpiece zero-point clamping system > Servo drives with absolute encoders > Integrated control unit with touchscreen Options > Machine base frame > Various zero-point clamping devices: T-slot plate, four-jaw chuck, precision vise, and blank holder > Automatic loading system > 3D touch probe > Why buy? Easy financing available. Contact us! The iMG 1010 is a compact solution for machining workpieces up to 100x100x100 mm. Thanks to its base structure made of polymer concrete, it ensures precise processing of a wide variety of materials such as titanium, steel, CoCr, ceramics, sapphire, zirconium, or aluminum. Particularly noteworthy is the arrangement of the Y-axis, which, due to its installation positions, provides high stability and exceptional vibration damping. Nearly all positions on the workpiece are accessible without reclamping. The selection of clamping devices and holders in combination with the zero-point clamping system makes the machine a versatile machining center. Its design allows for both wet and dry machining without time-consuming changeover. The CNC machine can be optionally upgraded with a loading and unloading system that accesses the machine room from the right, left, or from above, enabling automated workpiece changeover. Rodohqhkispfx Ahvjn The zero-point clamping system serves as an interface and ensures exact and repeatable positioning of the workpiece. Through software interfaces, the system can be integrated into network-controlled, automated manufacturing processes. The maintenance-friendly design and durable direct-drive spindles save both service costs and time, providing a reliable machining system. During design, special attention was paid to ensuring that all components are easily accessible while still being protected from external influences, guaranteeing a long service life. The sophisticated system offers numerous possibilities for expansion.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 246203 xxxx, Model Building Gantry Milling Machine – The Ideal Base for Constructing CNC Machines and Applications. The FB2 flat-bed unit is an excellent entry point into CNC technology and is perfectly suited for model building and hobby use. The FB2 is also frequently deployed in industry for measurement and dosing technology, as it offers extensive expansion options. Access to the isel modular system is also available with this unit. Various travel sizes, from 530 x 500 mm to 1030 x 1250 mm, as well as expansions like base frames and enclosures, are available and can be configured individually. IDEALLY SUITED FOR: • Perfectly suitable for laboratory, model building, and workshop environments • Assembly and mounting • Printing and engraving • Drilling and milling • Dosing and screwdriving • Shaping and modeling • Gluing and encapsulating • Soldering and welding • Measuring and testing • Sawing and cutting, and much more Z-clearance = 190 mm (Z-clearance = 300 and 500 mm available upon request!) FEATURES: • Durable stepper motors in the 200 W class • Equipped with reliable LES units driven by steel ball screws • Workpiece clamping with T-slot plate Redpfx Ahohqmamsvsn • Available with or without protective hood • Customizable gantry clearances, tailored to customer requirements OPTIONS: • iFM or UFM spindle motor • Coolant spray system • Cool-Min cold air cooling • Automatic tool length measurement • Rotary units • Workpiece clamping systems (lever clamps, vacuum tables, etc.) • Extraction systems • LED machine room lighting • RAL color selection • CAD/CAM software • Clearances of 190 mm, 300 mm, or 500 mm • High-performance 4-axis control controller • Base frame • Enclosure with sliding or folding doors

Kondisi: baru, nomor mesin/kendaraan: 280270 0001, ADVANTAGES: Compact benchtop machine Easy to operate 3-axis stepper motor control with continuous path operation Redpfxslkbpzo Ahvjn Ball screw drives 2-phase stepper motors Including CNC control software iCP4030P – with stepper motor drive and path control GENERAL INFORMATION CNC machines of the iCP series are further developments of the proven CPM series. By introducing a sliding door, the machines can now be operated while seated, which among other benefits leads to shorter cycle times when opening the hood. The chassis is fully bolted instead of welded as with previous models, resulting in higher assembly precision and improved serviceability. Additionally, the resonance and vibration characteristics have been optimized, resulting in reduced noise emissions. X = 400 mm Y = 300 mm Z = 140 mm Clearance = 200 mm – in use for over 40 years! – over 20,000 systems sold HIGHLIGHTS Compact benchtop machine Easy operation 3-axis stepper motor control with continuous path operation Ball screw drives 2-phase stepper motors Including CNC control software Mosaic safety circuit POPULAR MATERIALS Foam Plastics ACCESSORIES Length-measuring probe Spindles (iFM1000ER, iFM1000WS) Quick-clamping system Collets Extraction unit

Kondisi: baru, nomor mesin/kendaraan: 280261 0001, Features > Ready-to-connect CNC machine > Low-noise operation thanks to maintenance-free servo motors > Ergonomically slim design > Powerful isel control system with maintenance-free servo motors > Robust linear units with precision ball screws used for drive mechanisms > Effortless operation via height-adjustable display > Network-capable control PC running WINDOWS > User-friendly soft-lift hood > Workpieces clamped using T-slot table Redpfxelnikke Ahven Options > Milling spindle 500W – 1200W > Linear tool changer > Tool cooling available as spray or air versions (CoolMin) > Tool length measuring probe > Vacuum clamping table > Maintenance unit with valve manifold > Base table with swiveling monitor and integrated keyboard > Base table for installation of vacuum pump, cooling unit, and other peripheral devices > Automatic hood opening > Safety light curtain > Why buy? Easy financing available. Contact us! The iCV 4030 EC is a compact benchtop machine featuring a proven, optimized chassis design. Optionally, a practical base table with monitor and integrated keyboard is available. The CNC machine is modular in construction; all control components, including the isel CNC controller and the control computer, are integrated at the rear of the machine for easy service access. All linear axes installed in the machine are from the isel range; they run on linear ball bearings along ground precision steel shafts. Zero-backlash preloaded ball screw drives with various leads are used for actuation. The machine table, made from precision-milled T-slot profiles, offers versatile clamping options for individualized workpiece holding and fixturing. The iCV 4030 EC is suitable for a wide range of applications and industries, and is typically preferred for precision machining operations. A comprehensive array of accessories tailored to your application completes the product offering.

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Sumbu X: 320 mm, sumbu Y: 400 mm, sumbu Z: 90 mm. Tidak diketahui ada cacat, telah dirawat secara berkala, tanpa aksesori atau suku cadang. Mesin sudah dibongkar. Inspeksi di lokasi memungkinkan, tidak dalam kondisi teraliri listrik. Rjdpfx Asw U Dwbshven