Beli Italia bekas (3.462)

Kondisi: baru, FERVI mod. 0601 Sandblasting Machine with Extractor Internal working dimensions: 1180 x 850 x 890 mm (H) Maximum load capacity: 150 kg Operating pressure: 6 - 8 Bar Air consumption: 21 SCFM (630 l/min) Iodpfxoh Nylqs Akpjth Gun nozzles: Ø 6 - 7 mm Electric extractor: 230 V, 50 Hz, 1.2 kW Filtration capacity: 5 micron Equipped with lighting: Yes Overall dimensions: 1330 x 1240 x 1770 mm (H) Net weight: 180 kg Packaging dimensions: 1340 x 970 x 1802 mm (H)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVABLE CYLINDER Capacity: 150 tons. Automatic dual-speed operation with rapid approach. Special electrical control panel with rapid/slow switch for one-hand operation. Transversely movable cylinder, stroke: 816 mm. Internal daylight (column to column): 1500 mm Ram stroke: 300 mm No. 01 ELECTRO-HYDRAULIC PRESS WITH MOVABLE PISTON AXA PM150/15 – NEW CONDITION, CE MARKED. -AUTOMATIC DUAL-SPEED WITH FAST APPROACH. -COMPLETE WITH SPECIAL ELECTRICAL PANEL AND RAPID/SLOW SWITCH FOR ONE-HAND CONTROL. -TECHNICAL DATASHEET ATTACHED. - Pressing force: 150 tons - Cylinder stroke: 300 mm - Internal clearance: 1504 mm - Approach speed (rapid): 1450 mm/min - Working speed (slow): 105 mm/min - Cylinder piston stroke: 300 mm - Cylinder rod diameter: 110 mm - Shank diameter: M30 - Tank capacity: 50 liters - Max pressure: 350 bar - Voltage: 400 V, Frequency: 50-60 Hz - Motor power: 3 kW Itedpfx Akslruhdjpeh - Max absorbed current: 7.3 A - Weight: 1500 kg Features: - GALTECH distributors. - 2MP block. - Two unidirectional VIVOIL external gear pumps: one for rapid approach and return (set to 20 bar), and one with pressure control handwheel for setting required pressing force. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard pressure gauge for monitoring delivered force. - INTECH control panel certified to current standards with independent CE marking.

Kondisi: baru, Parallel lathe with clutch and readout Fervi T085F10, featuring a mechanical clutch, 3-axis digital readout, and semi-Norton gearbox. Available from stock unless previously sold. WITH MECHANICAL CLUTCH, 3-AXIS DIGITAL READOUT, AND SEMI-NORTON GEARBOX. FITTED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. MONOBLOCK CAST IRON BED. Technical data: - Centre height: 385 mm - Maximum swing over bed: 770 mm - Maximum swing over carriage: 575 mm - Maximum swing in gap: 1050 mm Iedpfxsvbqlhs Akpoth - Tool height: 32 mm - Distance between centres: 1000 mm - Spindle bore: 105 mm - Spindle mount: Camlock D1-8 - Spindle speeds (12): 36 - 1600 rpm - Longitudinal feeds: 0.063 - 2.52 mm/rev - Cross feeds: 0.027 - 1.07 mm/rev - Metric threads (22): 1 - 14 mm - Inch threads (26): 2 - 28 TPI - Tailstock taper: MT 5 - Motor: 400V 50/60 Hz 7.5 kW - Coolant pump: 400V 50/60 Hz 90 W - Dimensions: 2500 x 1550 x 1700 mm - Net weight: 3250 kg - Gross weight: 3250 kg Included accessories: - 3-jaw self-centering chuck Ø 320 mm with reversible jaws - 4-jaw independent chuck Ø 400 mm - Faceplate Ø 600 mm - Travelling steady - Fixed steady - Rotating tailstock centre MT 5 - Threading dial indicator - Leadscrew guard - Toolpost guard - Chuck guard - Rear splash guard - Type C quick-change toolpost - LED work lamp - Coolant system - Electro-mechanical foot brake - Rapid-lock tailstock carriage - Carriage gears in oil bath - Adjustable levelling feet

Kondisi: sangat baik (bekas), Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2003, Mesin gunting guillotine hidrolik ITALTECNICA Tahun produksi: 2003 CE. Panjang potong efektif: 3050 mm Ketebalan potong maksimum: 6 mm Programator ESA TRIA 250 Pengaturan sudut potong Back gauge bermotor dengan penyangga pelat pneumatik. Itjdpsw T Tcqsfx Akpjh Berat: 8.000 kg Daya motor: 7,5 kW Pelindung keselamatan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Spot Welder Bertiang PEI MOD. PBP 126 PX Tahun produksi 2006 CE Mesin las titik pneumatik PEI POINT mudah digunakan dan ideal untuk pengelasan semua jenis logam. Mesin ini dioperasikan secara pneumatik menggunakan pedal kaki dan memiliki daya las maksimum 25 kVA. Mesin ini juga dilengkapi dengan pemegang elektroda, elektroda, lengan dan trafo yang didinginkan air. Itjdpfx Aew T Tlfjkpjh Lengan atas dapat diatur kedalamannya, dan lengan bawah dapat diatur ketinggiannya. Bekas • Pengoperasian pedal kaki berbasis pneumatik • Daya las maksimum: 25 kVA • Kapasitas maksimum: 2,0 mm • Tekanan elektroda: 165 dan • Jangkauan/lengan: 580 mm • Lengan atas dapat diatur kedalaman • Lengan bawah dapat diatur ketinggian • Rangka baja • 400 V, 50 Hz

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, produsen pengendali: ESA, lebar kerja: 3.050 mm, ketebalan lembaran (maks.): 4 mm, penyesuaian pengukur belakang: digerakkan oleh motor, jenis arus masuk: tiga fasa, Perlengkapan: Pelat tipe tersedia, henti darurat, kendali jauh kaki, perlindungan jari, Gunting guillotine hidraulik OLEOTECNICA Panjang pemotongan efektif: 3050 mm Ketebalan pemotongan maksimum: 4 mm Itedpfx Asyqwhfjkpsh Programmer ESA untuk tampilan ukuran. Penahan belakang bermotor. Perlindungan keselamatan kerja.

Kondisi: baru, The SPECIAL 411 MS MACC is a semi-automatic bandsaw designed for cutting solid bars and small profiles, delivering high performance and excellent precision. Its robust structure gives the machine the necessary rigidity and accuracy for the cutting assembly. The blade drive is equipped with a two-speed motor, and the special gearbox, with a complete gear set, features a bronze gear with a hardened and ground worm screw. The properly dimensioned flywheels and band guides are robustly built and feature sealed ball bearings and adjustable carbide (Widia) plates. Using the electromechanical micro-switch control, the blade tension can be set by rotating the blade. The machine is equipped with safety devices on both the flywheel cover guard and the blade itself. Additional features include a swivel table to support the material and a vise with a quick approach device. Operation: The cutting cycle starts by pressing the start button. The machine: 1. Closes the vise and activates the blade motor 2. Lowers the saw frame for cutting Itsdsfh R Tyepfx Akpsh 3. Returns the saw frame to the starting position 4. Stops the blade motor 5. Opens the vise Manual cutting option available Cutting speed (m/min): 38–77 Blade thickness (mm): 1.2 Cutting range: from 45° left to 60° right Stop for repetitive cuts: Adjustable Coolant pump power: 0.06 kW

Kondisi: baru, Rolling Bending Machine OMEC 3-Roll Mechanical Symmetric Double Pinch Brand New “CE” Made in Italy WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAX BENDING THICKNESS 1.5 x D: 4 mm MAX BENDING THICKNESS 3 x D: 4.5 mm MAX BENDING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 kW WEIGHT: 1700 kg The FX3-3 series distinguishes itself as the OMEC mechanical asymmetric 3-roll plate bending machine with simple, complete initial pinch. The side roll (bending roll) is standard with steel supports and bearings, while bronze external slideways ensure maximum reliability and minimal friction over time. The rotation of the rolls is applied to the UPPER and LOWER rolls by means of gear reduction and self-braking motor; translation and sheet clamping mechanisms use top-brand motors and reducers. Equipped with induction-hardened rolls, motorized translation and clamping systems, readiness for profile bending rollers and conical device directly integrated in the upper roll, these machines represent the ideal compromise between absolute quality and operator ease for cylindrical and conical rolling operations. By standard, side extraction of the rolled shell occurs via the lateral opening of the upper roll. MACHINE CONFIGURATION: - MOTORIZED UPPER and LOWER ROLL rotation with equal power. - MOTORIZED SIDE ROLL up/down movement. - MOTORIZED SHEET CLAMPING. Iodpfx Akjgyk S Aopjth - DIGITAL READOUT for side roll position. - DIGITAL READOUT for sheet clamping position. - INDUCTION-HARDENED ROLLS: HRC 55/60, depth 2 mm. - Side roll supports in steel + shielded bearings + external bronze slideways. - INCLINATION PRE-SETTING for side roll(s) for cone production (cone device excluded). - EXTERNAL SIDE ROLL INCLINATION CONTROL LEVER (right side) for FX3.2/FX3.3 – (right + left) for FX4.1/FX4.2. - PREPARED FOR PROFILE-BENDING ROLLS. - 2-PEDAL FOOTSWITCH with side roll up/down and sheet clamping commands + Emergency stop mushroom. - ELECTRONIC PHASE CONTROL for the power feed. - ELECTRIC CABINET compliant with CE regulations. INCLUDED WITH THE MACHINE: - Front conical device on upper roll. - Digital readout for the side roll position. - Digital readout for sheet clamping position.

Kondisi: baru, AXA 360° Swing Jib Crane. Max capacity: 500 kg. Max height: 2804 mm. Max outreach: 1360 mm. Easily maneuverable thanks to 360° rotation and high-capacity, low-friction swivel casters with bump protection and parking brakes. With a front footprint of only 995 mm, it can be used in aisles and confined spaces. The lifting arm is extendable to 4 different positions. Iedegypgdepfx Akpeth

Kondisi: baru, Ready for immediate delivery, subject to prior sale. Hydraulic combined shear with 5 workstations, punching station with mechanical back gauge and adjustable ram stroke, notching, shearing for flat bars, bars, and profiles with adjustable back gauge and automatic cutting control, foot pedal, centralized lubrication system, work light. Machine supplied with safety guards according to CE regulations, CE declaration of conformity, user manual. Applied force: 45 Ton Motor power: 4 kW Dimensions: 1,450 x 900 x 1,450 mm (L x W x H) Weight: 1,215 kg PUNCHING: Punching capacity: Ø 22 mm x 15 mm thickness Throat depth: 175 mm Punch stroke: 50 mm Working height: 935 mm SHEARING: Flat bars: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Round bars: Ø 30 mm Square bars: 45 mm Angle profiles at 90°: 100 x 100 x 10 mm Iedpjgygfvefx Akpjth Angle profiles at 45°: 70 x 70 x 6 mm NOTCHING: Max thickness: 8 mm Width: 35 mm Depth: 75 mm Working height: 935 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, HYDRAULIC PUNCHING MACHINE FICEP MOD. SP 40 Itjdpfxswm Emvs Akpsh Used machine in excellent condition, CE certified. Exerted punching force: 40 tons Maximum punching diameter on thickness: 32 mm x 10 mm Throat depth: 510 mm Working height: 955 mm Stroke length (punch): adjustable from 0 up to 40 mm Net weight: 860 kg Dimensions: 1365 x 665 x 1700 mm (h) Motor power: 4 kW Large hole device for diameters up to 46 mm included in the scope of supply.

Kondisi: baru, Column drilling machine: precise, quiet, and reliable. Manufactured in compliance with strict safety standards. Precision spindle axis with hardened Morse taper, ground base plate. Supplied with electronic variable speed drive. Swivel table and vice, 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M14. Spindle taper: MT2. Spindle travel: 90 mm. Spindle quill diameter: 52 mm. Column diameter: 98 mm. Distance column to spindle centre: 201 mm. PU transmission. Electronic speed variator (E). Spindle speed: 270 – 4,200 rpm. Motor power: 0.75 kW / 220 V single phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg. Iodpfxsir Aiho Akpsth

Kondisi: baru, Tahun pembuatan: 2025, OMCN P30/SA hydraulic press with dual-speed hand pump, 30 tons. The OMCN P30/SA hydraulic press features a manual drive via a dual-speed hand pump and a robust base frame that ensures maximum stability with minimal floor space requirement. Thanks to the perforated frame, the support base can be height-adjusted in 9 different positions, allowing the press to handle workpieces of various sizes. The integrated winch facilitates easy and quick adjustment of the worktable height. + Rapid approach + Precision Essential in workshops and industrial settings, this press is ideal for metal pressing tasks such as assembly operations for mechanical components, fitting of bearings or pulleys onto shafts. Manufactured in Italy and CE certified, the press is constructed from durable materials to ensure long-term reliability, and it can generate a pressing force of 30,000 kg. Dimensions: 2180 x 1300 x 600 mm Weight: 280 kg Pressing force: 30 tons Distance between uprights: 695 mm Piston stroke: 190 mm Itsdoklyvtepfx Akpoh Piston diameter: 60 mm

Kondisi: baik (bekas), Tovaglieri parallel lathe Used, previously owned by an educational institution. Excellent condition. Center height: 180 mm Distance between centers: 700 mm Spindle bore: 45 mm Supplied accessories included. 4 units available, subject to prior sale. Isdpfokt U E Isx Akpeth

Kondisi: baru, Electric Press Brake MVD Model S40. Useful bending length: 1250 mm. Pressing force: 40 Ton CNC Control: ESA S630 Controlled axes: 4 (Y1-Y2-X-R) Maximum Y axis stroke: 310 mm Clearance between uprights: 500 mm Backgauge stroke: 750 mm Main motor power: 2 x 4.3 kW UNIMEC backgauge (Made in Italy) GIVI MISURE optical scales (Made in Italy) Quick-release PROMECAM-style tool clamping Faster operation Shorter bending cycles Excellent bending results Lower maintenance and production costs Quiet operation Reduced energy consumption Ijdpfx Asrp E A Tskpsth

Kondisi: baik (bekas), Tahun pembuatan: 2010, Vertical CNC Milling Machine BMS 4AL CNC ECS 1801 CNC Controller Heavy-duty milling machine suitable for a wide range of applications Meehanite cast iron construction Itjdpfx Aksupg Nujpjh 5 HP spindle motor with inverter (variable speed) Automatic feed on X and Y axes via 1/2 HP motor with inverter Knee elevation and lowering by 1 HP motor Large working area: 305x1500 mm Spindle taper: ISO 40 – Quill diameter: Ø 105 mm Square guideways on Y and Z axes X and Y axes slideways coated with Turcite-B Hardened table and guideways

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, KOIKE DELTATEX 4000 CNC Gantry Plasma Cutting System. Effective transverse cutting width: 3,000 mm. Effective longitudinal cutting length: 12,000 mm. Travel way length: 14,000 mm. Travel speed: 24,000 mm/min. Iodpfov Sua Rox Akpsth Gantry guide system: X-Y axes, rack and pinion. Installed carriage types: 1x KOIKE 3D Link plasma torch support carriage. CNC control: KOIKE Katana. Plasma power source: KJELLBERG HF 280i. Recommended cutting capacity with KJELLBERG HF 280i plasma: Cooling unit: KWE 360. - Vertical plasma cutting: 35 mm (in production) CS/SS. - Maximum vertical plasma piercing capacity: 40 mm CS/SS. Machine can be seen in operation, excellent condition.

Kondisi: siap digunakan (bekas), FE.MAR mechanical guillotine Isdpswm Er Eefx Akpoth Cutting length: 2000 mm Cutting thickness: 3 mm Motorized backgauge Steel frame Front sheet metal supports.

Kondisi: bekas, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 24 rpm, kecepatan spindel (min.): 1.685 rpm, lebar meja: 700 mm, panjang meja: 4.000 mm, berat keseluruhan: 1.300 kg, Mesin frais meja tetap ZAYER Mod. 3500 BF Bekas Perjalanan sumbu X 3.500 mm Perjalanan sumbu Y 1.000 mm Perjalanan sumbu Z 1.000 mm Ukuran meja 4.000x700 mm Kepala birotational tipe HURON Kerucut spindle ISO 50 Putaran spindle 28-1.800 rpm Display digital posisi sumbu termasuk Itodeytp S Ispfx Akpeh

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis aktuasi: mekanis, jumlah rol: 3, berat keseluruhan: 5.000 kg, Perlengkapan: dokumentasi / manual, Mesin pembengkok profil PARMIGIANI Mod. MERCORI – M Bekas. Mesin pembengkok tiga rol horizontal. Tersedia untuk pengiriman segera, kecuali telah terjual. Itedpfjyxwdwjx Akpsh Pengaturan dengan tampilan visual. Lengkap dengan alat untuk pembengkokan plat dan pipa. Panel listrik baru. Manual penggunaan dan perawatan. Kapasitas pembengkokan: Profil sudut 120 x 120 x 12: Ø minimum 1200 mm. U 160 vertikal: Ø minimum 1000 mm. Plat vertikal 140 x 40: Ø minimum 1000 mm. Plat horizontal 120 x 30: Ø minimum 1600 mm. Pipa 4″: Ø minimum 1200 mm. Berat: 5000 kg. Daya motor: 380 V 12 Hp.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 420 mm, lubang spindel: 105 mm, diameter pembubutan: 660 mm, tinggi pusat: 330 mm, panjang pembubutan: 2.000 mm, panjang total: 3.500 mm, lebar total: 1.400 mm, tinggi total: 1.600 mm, kecepatan spindel (maks.): 1.600 rpm, kecepatan spindel (min.): 36 rpm, berat keseluruhan: 3.700 kg, READY TO DELIVER FROM STOCK – SPECIAL OFFER!!! NEW "CE" COMPLIANT. LATHE WITH MECHANICAL CLUTCH 3-AXIS DIGITAL READOUT AND SEMI-NORTON GEARBOX. EQUIPPED WITH JOYSTICK FOR RAPID TRAVERSE ENGAGEMENT. ONE-PIECE CAST IRON BASE. Centre height: 330 mm Maximum swing over bed: 660 mm Maximum swing over carriage: 420 mm Maximum swing in gap: 870 mm Ijdpfjyyn Ddox Akpoth Tool post height: 32 mm Distance between centres: 2000 mm Bar capacity: 105 mm Spindle mount: Camlock D1-8 Spindle speed: (12) 36 – 1600 rpm Longitudinal feeds: 0.063 – 2.52 mm/rev Cross feeds: 0.027 – 1.07 mm/rev Metric threads: (22) 1 – 14 mm Inch threads: (26) 2 – 28 TPI Tailstock taper: MT 5 Motor: 400 V 50 Hz 7.5 kW Coolant pump: 400 V 50 Hz 90 W Dimensions: 3500 x 1400 x 1600 mm Net weight: 3700 kg INCLUDED WITH THE MACHINE: 320 mm Ø 3-jaw self-centering chuck (reversible jaws) 400 mm Ø 4-jaw independent chuck 600 mm Ø faceplate Travelling steady Fixed steady Rotating tailstock centre MT 5 Threading dial indicator Leadscrew guard Tool post guard Chuck guard Rear chip guard Quick-change tool post type C LED work lamp Coolant system Electro-mechanical foot brake Quick-release tailstock carriage Oil-bath apron gears Adjustable levelling pads

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, berat keseluruhan: 1.310 kg, tegangan masuk: 400 V, panjang total: 1.500 mm, lebar total: 1.000 mm, tinggi total: 2.250 mm, NR.01 MESIN BROACHING EGITAL MOD. S 315 TG BEKAS "CE" Tahun 2008 CE. Kondisi sangat baik. Langkah alat: 0-315 mm Pukulan per menit: 17-60 Penyesuaian ketinggian selidik: 235 mm Kepala dapat diputar: ±45° Jarak alat ke kolom: 460 mm Isdpsy H Imxofx Akpsth Jarak kepala ke meja: 510 mm Diameter meja putar: 450 mm Posisi tetap pada meja putar: 24x15° Dimensi: 1000x1500x2250 mm Berat: 1310 kg Pelepasan alat otomatis Chuck disertakan

Kondisi: baru, Hydraulic Synchronised Press Brake MVD Model: I-Bend A 3100 135 Numerical Control: ESA S630 with Touch Screen Videographic Interface Number of Controlled Axes: 4 (Y1-Y2-X-R) Motorised Compensation Table Promecam-type Tool Clamping with Quick-Release Lever NEW ELECTRONICS DSP LASER Multi-Beam Safety Light Curtains Motorised Back Gauge, 750 mm Travel Bending Length: 3100 mm Pressing Force: 135 Tons Itjdsfh Nz Hjpfx Akpsh Throat Depth: 410 mm Stroke: 210 mm Daylight Opening: 415 mm Supplied with ROLLERI Multi-Vee Upper Tools and Lower Dies

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic shear MVD I-SHEAR C 3100 – 10 Complete with pneumatic rear sheet support. Itsdofh R Ilspfx Akpeh CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC BLADE GAP ADJUSTMENT Cutting capacity for material 450 N/mm²: 10 mm Cutting capacity for material 700 N/mm²: 6 mm Cutting length: 3100 mm Distance between side frames: 3600 mm Variable cutting angle: 0.5° - 3° Number of hold-down cylinders: 14 Strokes per minute: 7 – 13 Throat depth: 250 mm Motor power: 22 kW Millimeter-graded square and two sheet supports: 1000 mm Back gauge travel: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 10.5 tons

Kondisi: baru, Tahun pembuatan: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with fast motor, equipped with a pressure gauge and double-speed hydraulic unit, featuring a vane pump for rapid approach and retraction and an axial piston pump for the working phase. Fitted with a pressure adjustment valve and a three-position control distributor (advance – neutral – return). The machine is supplied with oil. Equipped with a winch for raising the work table. The ram is made of special treated and chromed steel. The machine is equipped with two-hand control and simultaneous operation in accordance with current regulations. Complete with protective panels at the rear and sides. CE certified with full electromagnetic compatibility. Piston stroke: 310 mm Clearance: 1,010 mm Iodpfxjfh R Nys Akpoth