Beli Itnc 530 bekas (3.377)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Translation into English: x-axis travel: 400 mm y-axis travel: 450 mm z-axis travel: 350 mm Control: Heidenhain iTNC 530 Tool changer: 68 positions Tool holder: HSK 40E Spindle speed: 30,000 rpm Fixed table - table size: 300 x 400 mm Predpjxfb E Ajfx Ab Hec Workpiece weight: 200 kg Pallet table size: 320 x 320 mm Rapid traverse (x/y/z): 40 m/min Spindle drive motor: 13 kW Operating hours: 32,369 h Total power requirement: 16 kW Machine weight: approx. 7,500 kg High-speed 3-axis universal machining center with 7-position pallet changer. Operating hours: 44,899 h; Load hours: 32,369 h; Spindle hours since replacement: 13,350 h. Accessories: 1 BURN chiller, 1 Keller L-Cut extraction system (year 2012), PS 32 setup probe, and tool air blow-off device. Portal-type machine frame in heavy-duty monoblock polymer concrete construction, compact linear ball guides, direct Heidenhain measuring system, hydraulic unit for tool and pallet clamping, digital drives with liquid-cooled Siemens AC servomotors. This is a used machine; therefore, we sell under exclusion of any warranty. STOCKING DEALER WITH A 1,600 m² EXHIBITION HALL.

Kondisi: bekas, CNC travelling column drilling and milling machine ANAYAK Type HVM-3800-P Bed-type milling machine, design similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 Travel ranges X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size 3800 x 1200 mm T-slots 8 pieces, size 22 mm, spacing 130 mm Table load capacity max. 25 tons (fixed table - virtually unlimited load) Spindle taper ISO 50 (DIN69871-A) (drawbar thread DIN 69872-B) Spindle speed 60-4000 rpm, stepless Feed rate up to 10,000 mm/min, stepless Rapid traverse in X + Y 20 m/min Rapid traverse in Z 10 m/min Spindle drive 22 / 30 kW Power supply 400 Volt, 50 Hz, 50 kVA Pedpfxjxcgtgo Ab Herc - Automatic tool changer, 30 positions - Spindle drive with 2 speed ranges - Equipped with automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swivelling in two 45° planes (B + C axis) - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional high-frequency spindle 18,000 rpm, attachable - Separate electrical cabinet - Chip conveyor mounted between travelling column bed and machine table - 32,078 operating hours recorded - Coolant system - Separate hydraulic unit - Operating manual with circuit diagrams Machine footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Total weight: approx. 33 tons Good condition Direct from site Kassel, free loaded – immediately available

Kondisi: baik (bekas), Tahun pembuatan: 2002, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: Heidenhain, Pusat Pemesinan 3-Axis Pabrikan: Bridgeport Seri: VMC-1000 XP Tahun Pembuatan: 10-2002 Jenis Kontrol: Heidenhain iTNC-530 Jam Operasi: n/a S/N: 82XXXX Data teknis: ----- Psdjw Nyfdepfx Ab Hjrc - Perjalanan sumbu X-Y-Z: 1.050 x 610 x 600 mm - Spindel: max. 8.000 rpm - Dudukan alat: SK40 - Magasin alat: 22x - Sistem pendingin - Pendingin internal / pendingin melalui spindel - Skala kaca pada semua sumbu X-Y-Z - Pelumasan terpusat - Berat: sekitar 4,2 t - Dimensi PxLxT: 3.000 x 2.350 x 2.400 mm Aksesori: ----- - Manual - Paket dudukan alat Fitur khusus: ----- - Pendingin internal dinonaktifkan karena saluran pendingin pada spindel rusak - Spindel diganti pada tahun 2023, jam kerja sedikit, putaran sangat presisi.

Kondisi: bekas, Tahun pembuatan: 2004, depo-jet-906-en Prsdpfx Abow Tlqmj Hjc

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 1.300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, rentang pivot: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle stock horizontal): 1,300 mm Control • CNC Control: Heidenhain iTNC 530 Feed Rate • X, Y and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Podpfx Aexgq Ayjb Hjrc Universal Milling Head, Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm o Temporarily 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank capacity: 500 l About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer support, machine overhauls, as well as control retrofits. Services: - Used machinery - Spare parts - Customer service - Machine servicing - Machine overhauls - Control retrofitting ----- _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used fraesmaschine – used CNC milling machine – used drill milling machine – used metal milling machine – used metal mill – used metal milling machine – used CNC mill – CNC fraesmaschinen – CNC milling machines – milling machine – large part machining – CNC large part machining – milling – SHW – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column milling machine

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 10.799 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8P31127C4, jarak pergerakan sumbu X: 1.145 mm, jarak lintasan sumbu Y: 615 mm, jarak gerak sumbu Z: 615 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 10.799 h, pasokan pendingin: 20 batang, hidung spindel: SK-40 DIN69871, jumlah spindel: 1, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pinnacle LV 116 Control: Heidenhain iTNC 530 Travel X: 1,145 mm Travel Y: 615 mm Travel Z: 615 mm Table size: 1,200 x 600 mm Tool holder: SK-40 DIN69871 Tool stations: 30 Max. spindle speed: 12,000 rpm Operating hours: 11,658 h (as of 20/06/2025, machine is still in use) Pedpfx Abetphbzj Hjrc Rapid traverse: 30 m/min Weight: 6.5 t Equipment: - Internal coolant supply (IKZ) 20 bar with belt filter unit - Mobile electronic handwheel - Heidenhain iTNC 530 Payment terms: 100% before dismantling and loading The Belleville washer pack for the tool retention force was replaced in August 2024. We are a toolmaking company downsizing our production. The machine is under power and still in use. Inspection and test run possible. The machine can be handed over at short notice by arrangement. In case of purchase, we can additionally offer: - Training of your personnel - Cleaning of the machine - Installation of transport locks - Loading onto lorry - Transport with our own lorry - Unloading at your site - Positioning of the machine at your location - Alignment of the machine - Connection and commissioning

Kondisi: bekas, Hermle C 600 U 5-Axis CNC Universal Machining Center Milling Machine Spindle on-time: 28,383 h Control on-time: 64,298 h X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Spindle taper: HSK A 63 Feed rate range: 1-30,000 mm/min Rapid traverse: 35 m/min Speed: Rotary table diameter: 280 mm Rotary range A-axis: +20 / -90° Rotary range C-axis: 360° Control: Heidenhain iTNC 530 Prsdpfx Aouqap Rjb Hoc Year of manufacture: 2002 Weight: approx. 6,500 kg You are welcome to arrange an inspection appointment. We can organize cost-effective shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can be issued, provided you supply a valid VAT ID number. Subject to prior sale. Please visit our shop to see our other offers as well. All company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are subject to change.

Kondisi: bekas, CNC vertical travelling column bed milling machine DECKEL MAHO Vertical Machining Centre Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D path control Heidenhain iTNC 530 Travel X: 2200 mm, Y: 560 mm, Z: 720 mm Table size: 2600 x 605 mm Table load capacity: 2200 kg Table height above floor: 870 mm Podpfx Abow Iqt Ae Hsrc Distance table - spindle nose: max. 752 mm Spindle taper: SK 40 (DIN 69871 A) - ISO40 with pull stud DIN 69872 Spindle speed: max. 12,000 rpm Spindle drive: 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed rate: 0-20,000 mm/min. Rapid traverse X-axis: 100 m/min. Rapid traverse Y+Z-axis: 50 m/min. Power supply: 400 Volt, 50 Hz, 73 kVA - 30-position tool changer - Through-spindle internal coolant supply 40 bar (IKZ) - Air blast with minimum quantity lubrication for tool cooling - Air blast through spindle centre via M-function - 2 rotating safety windows - Operation mode 4, process monitoring in production - Electronic handwheel on hand control panel - External coolant treatment system, paper band filter with filter tray - Chip conveyor for installation under working area - Central lubrication (grease) - Operating manual - Operating hours - control on = 75,188 h - Operating hours - program run or spindle on = 31,632 h - Control system with interfaces for data transfer, RS232C + USB Footprint L x W x H: 650 x 400 x 280 cm Base machine space requirement L x W x H: 490 x 395 x 275 cm (with control panel) Chip conveyor space requirement L x W x H: 550 x 90 x 160 cm (approx. 500 kg) Coolant treatment system space requirement L x W x H: 180 x 115 x 190 cm (500 kg) Base machine transport dimension L x W x H: 500 x 248 x 275 cm Additional required transport area for further components: 550 x 240 x 250 cm Weight of base machine: approx. 12.5 tons In good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (min.): 36 rpm, lebar meja: 800 mm, panjang meja: 3.000 mm, kecepatan rotasi (maks.): 4.000 rpm, Perlengkapan: dokumentasi / manual, SHW UFZ 4 Fixed Column Milling Machine Travels • X-axis (bed): 3,000 mm • Y-axis (vertical): 1,300 mm • Z-axis (spindle head): 1,000 mm Control • CNC control: Heidenhain iTNC 530 Table Assembly • Clamping surface: 3,000 x 800 mm - X travel: 3,000 mm Universal Milling Head in Orthogonal Design • Milling head mounting swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm RETROFIT in 2008 • Year of construction: 1992 Chip Conveyor • Discharge length: 3,000 mm Automatic Tool Changer • Magazine for 45 tools About us: Psdpfet Epnxsx Ab Hjrc MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus lies in tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls as well as control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system retrofits _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metalworking mill - used CNC mill - CNC milling machines - CNC milling machine - milling machine - large component machining - CNC large part machining - milling - shw - UFZ4S - UFZ 4 S - fixed column - bed type milling machine - SHW Uniforce - Heidenhain iTNC 530 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 1.300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, panjang meja: 4.000 mm, lebar meja: 1.500 mm, kapasitas tangki: 500 l, SHW PowerSpeed 5 Travel Paths • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rate • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range: 360 x 1 degree • Milling head tilting range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Table • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Splash and Chip Guard • 1-sided, with 2 sliding doors, manually operable About MBM Psdpow I Rz Hjfx Ab Hsrc MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine refurbishments, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhaul - CNC control retrofit ----- _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used cnc milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used cnc mill - cnc milling machines - cnc milling machines - milling machine - large component machining - large part machining - large part machining - cnc large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Kondisi: diremaj di bengkel (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, kecepatan rotasi (maks.): 6.000 rpm, kapasitas tangki: 1.200 l, EN: SHW Powerspeed 5 Prsdpfxjv Dhw Tj Ab Hec Travel distances • X-axis (bed): 10,000 mm • Y-axis (ram): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head rotation range tool holder: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Conveyor length: 10,000 mm Coolant system • Tank capacity: 1,200 liters Please note: The images are sample images for comparison purposes only About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main area of expertise is tool milling machines. Our services include spare part deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metalworking mill - used CNC mill - CNC milling machines - CNC mills - large part machining - CNC large part machining - milling - shw - PS5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Kondisi: baik (bekas), Tahun pembuatan: 2009, with Heidenhain iTNC 530 control system 18-speed milling gearbox Clamping surface 560 x 1600 mm 7 clamping slots Top width of T-slots: 18 mm T-slot spacing: 80 mm Infinitely variable feed, longitudinal and cross: 10 - 5000 mm/min Vertical feed: 10 - 2500 mm/min Adjustable via overdrive from 0 to 150% Rapid traverse, longitudinal/cross: 10 m/min Rapid traverse, vertical: 4 m/min Operating voltage: 400 V / 50 Hz Prsdexr Aq Hopfx Ab Hec

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, EN0014 Pedpfxovlzzne Ab Herc

Kondisi: sangat baik (bekas), Nomor katalog 7266 Predsrm Nfbepfx Ab Hjc DATA TEKNIS - Lebar poros: 530 mm - Poros 4 pisau - Sisir peredam suara - Pelindung poros - Panjang meja: 2900 mm - Meja masuk lebih panjang: 1655 mm - Meja dari besi cor - Kedua meja dapat diatur - Pemandu asli dari besi cor, dapat disetel - Rem - Diameter saluran ekstraksi: 140 mm - Motor: 4 kW - Dimensi (P/L/T): 2900x1000x1210 mm - Berat: 695 kg KEUNGGULAN – Produksi Jerman – Poros 4 pisau – Rem – Sisir peredam suara – Meja masuk lebih panjang – Tidak dicat ulang – Mesin jointer bekas, kondisi sangat baik Foto asli Video pengoperasian mesin: youtube.com/watch?v=v_3ECkLDWVI Harga netto: 18.900 PLN Harga netto: 4.500 EUR tergantung kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi nilai tukar yang signifikan)

Tahun pembuatan: 2004, Kondisi: diremajakan ulang (bekas), MULTIVAC R-530 ID.NO. 2200 Multivac R-530 Tiefziehverpackungsmaschine mit MR-Etikettierer für Oberfolienetikettierung. Folienbreite 622 mm, 2x Busch Vakuumpumpen, Abwickler, Werkzeug 2.1 (36 x 26,5 cm), Jumbo-Ständer, Baujahr 2004. Abmessungen 970 x 125 cm, Höhe 200 cm. Psdohua Enopfx Ab Herc

Kondisi: sangat baik (bekas), Planer thicknesser CASOLIN TOPStar 530 12/24 Prjdju T D Hqjpfx Ab Hsc Technical data: Max. planing width: 520 mm Max. planing height: 300 mm Cutterhead diameter: 110 mm Number of knives: 4 pieces Feed speed: 5/8/12/19 m/min Electric height adjustment Extraction port: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Height: 1280 mm

Kondisi: bekas, Mesin serut tebal SAC RS/530 - bekas - Pjdpfsw I T N Hsx Ab Herc Balok penekan rantai, pengaturan ketinggian elektrik, rol bawah meja, motor pengumpan terpisah ----- Data Teknis ----- Lebar penyerutan: 530 mm, Jumlah pisau: 4 unit, Tinggi bukaan: 240 mm, Kecepatan pengumpan: 7 / 14 m/menit, Diameter saluran ekstraksi: 140 mm, Motor: 4 kW, Berat: 840 kg

Kondisi: bekas, jarak tempuh: 169.121 km, daya: 390 kW (530,25 hp), pendaftaran pertama: 03/2023, jenis bahan bakar: diesel, inspeksi berikutnya (TÜV): 03/2025, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, filter jelaga, pemanas parkir, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 348.000 km, daya: 389,81 kW (529,99 hp), pendaftaran pertama: 02/2022, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 4.000 mm, bahan bakar: diesel, efisiensi energi: E, rem: intarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara/udara, Perlengkapan: ABS, filter jelaga, kendali jelajah, komputer bawaan, kunci diferensial, lampu depan tambahan, pemanas parkir, pendingin udara, sistem navigasi, spoiler,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 770 mm, berat benda kerja (maks.): 3.500 kg, kecepatan spindel (maks.): 7.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area Travel X-axis: 2,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 770 mm Spindle nose distance: 890 mm Number of machining axes: 3 Table Clamping area left-right: 3,220 mm Clamping area front-back: 1,000 mm Workpiece weight: max. 3,500 kg Spindle / Head Speed range: up to 7,000 rpm Drive power: 40 kW Tool Magazine Number of tool positions: 50 Workpiece Automation Type of storage: Magazine Control System Control type: CNC Control model: Heidenhain ITNC 530 MACHINE DETAILS Electrical Data Connection voltage: 400 V Dimensions & Weight Footprint left/right: 6,500 mm Footprint front/back: 5,000 mm Overall height: 3,700 mm Total weight: approx. 22,000 kg EQUIPMENT Chip conveyor: yes Predpfjwztphox Ab Hec High-pressure pump Magnetic plates are not included in the scope of delivery (optional for an additional €15,000). Machine will be provided partially dismantled, ready for collection from shop floor level.

Kondisi: baik (bekas),

Kondisi: bekas, Rotary Cutting Line Gämmerler RS 114/530 consisting of 2 cutting machines RS 114/530 and one corner diverter Gämmerler EM 120 with feed jogger – optionally also available with other/additional corner diverters and curves. With segmented knives Technical data: - Product formats untrimmed: min. 120 x 120 mm – max. 530 x 530 mm - Product formats trimmed: - 2-side trim: min. 117 x 117 mm – max. 527 x 527 mm - 1-side trim: min. 110 mm - Trim width: min. 0.5 mm – max. 45 mm Pedpfxeui U Ixj Ab Horc - Max. production speed: 80 m/min - Cutting depth: 8 mm - Cutting system: stream and single cut - Product type: web offset and gravure printing, dried and undried - Weight: approx. 670 kg /piece The rotary cutter is suitable for single and stream cutting of products. Other Gämmerler systems available on request. Machine type: Rotary cutting line

Kondisi: bekas, Tahun pembuatan: 2011, Travel path - X axis: 570 / 500 (1,070) mm Travel path - Y axis: 650 mm Travel path - Z axis: 530 mm Control: HEIDENHAIN iTNC 530 Spindle speed: 12,000 rpm Tool holder: SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, internal coolant supply (50 bar), zero-point clamping system, and chip conveyor. Pedpowlvrasfx Ab Hjrc The machine has only 7,863 spindle hours. A comprehensive tool package is included in the scope of delivery. The machine is in well-maintained condition. Please refer to the original order confirmation attached to the offer for further equipment details. #Tags: RS605 K IC 40 | RS-605 | RS 605

Kondisi: baru, daya: 390 kW (530,25 hp), jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, rem: retarder, warna: hitam, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2024, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 581.018 km, daya: 180 kW (244,73 hp), pendaftaran pertama: 02/2008, jenis bahan bakar: gas, jumlah tempat duduk: 37, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, warna: putih, rem: retarder, Perlengkapan: ABS, pemanas parkir,