Beli Kabinet Cts bekas (1.069)

Kondisi: sangat baik (bekas), CTS Temperature Test Chamber T-55/1000 Li Water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerants R404A/R23 The model designation for the CTS chamber series consists of the following: For example, Type T-55/1000/Li 1) T stands for: Temperature 2) -55 stands for: minimum temperature -55 °C 3) 1000 stands for: 1000 liters of test chamber volume 4) Li stands for: special configuration for tests with lithium-ion batteries Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric entry of set values - Error messages in plain text - Ethernet interface - RS232 interface - Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-intensity LED light bar mounted on the door Shelf: Stainless steel, support area 970 x 980 mm Load capacity per shelf max. 35 kg Total max. load with full shelf configuration 100 kg 1a Port NW50 1b Port 2x NW125 1c Port 2x Rp 3/4" for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: - Heating: 2.5 K/min - Cooling: 2.5 K/min Heat compensation: - approx. 4000 W at +20°C Bodjzg Ty Ujpfx Abvowu - approx. 2200 W at -40°C Technical specifications refer to ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Dimensions: Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level

Kondisi: sangat baik (bekas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Bjdpjzg Twasfx Abvswu Cooling Unit: - Air-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R404A Door: - Fully opening door, left-hand hinge - One-hand operation, lockable Shelving Grate: - Stainless steel, support surface 970 x 980 + 500 mm - Maximum load per shelf: 35 kg - Total load with maximum shelf configuration: 100 kg Test Chamber Lighting: - 3x halogen lamps, 20 W, 12 V Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input of setpoints - Plain text fault messages - RS 232 interface - Free switching channels for customer-specific test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Piping Feedthrough: NW 50 Control Panel Window: 570 x 710 mm Electrical connection cable length: 5 m Technical Performance Data: Temperature Tests: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 2.5 K/min - Cooling: 1.5 K/min Heat Emission: - Approx. 2500 W at +20°C - Approx. 2100 W at 0°C - Approx. 1500 W at -20°C Technical data based on ambient temperature +25°C, rated voltage 400V, without test specimens, no irradiation, and no additional equipment. Dimensions: - Test volume: 2000 litres - Test chamber internal dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm - External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz - Rated power: 17.2 kW - Protection class: IP 22 - Condensate drain: gravity, R 1/2" internal thread - Sound pressure level (measured at 1 m front distance, according to DIN EN ISO 3744): < 55 dB(A) - Weight: approx. 1200 kg Important Information for Your Safety as a Buyer! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run Condition: Used Scope of delivery: (see image) (Technical data, specifications, and information are subject to change and correction!) We are happy to answer further questions for you by phone.

Kondisi: sangat baik (bekas), CTS TSS-70/130 Lemari Uji Kejut Suhu Produsen: CTS Clima Temperatur Systeme GmbH Tipe: TSS-70/130 Tipe mesin: Lemari uji kejut suhu / Lemari uji suhu Volume pengujian: sekitar 130 liter Dijual lemari uji kejut suhu bekas dari produsen CTS. Mesin ini cocok untuk pengujian kejut suhu, pengujian perubahan suhu, pengujian material, pengujian elektronik, penjaminan mutu, serta riset dan pengembangan. Data teknis Ruang panas: +50 °C hingga +200 °C Ruang dingin: -80 °C hingga +100 °C Kecepatan perubahan suhu: maks. 100 K/menit rata-rata Waktu pergantian: < 10 detik Kecepatan penyesuaian suhu: ≤ 15 menit di kisaran -65 °C hingga +200 °C Kecepatan pemanasan: sekitar 6 K/menit Kecepatan pendinginan: sekitar 4 K/menit Penyimpangan suhu temporal: ±1 K Penyimpangan suhu spasial: ±2 K Dimensi luar sekitar: 2335 x 940 x 1820 mm (L x D x T) Dimensi pengiriman sekitar: 1990 x 940 x 1652 mm (L x D x T) Dimensi ruang uji sekitar: 480 x 660 x 410 mm (L x D x T) Jendela: sekitar 300 x 300 mm Berat sekitar: 950 kg Koneksi listrik: 400 V 3/N / 50 Hz Daya: sekitar 16,6 kW Arus nominal: sekitar 28,0 A Bjdpfx Aezf Ibkebvjwu Pengaman: 32 A lambat Kelas perlindungan: IP22 Media pendingin tahap pra-dingin: R404A, 4,0 kg Media pendingin tahap dingin: R23, 0,6 kg / 10 bar Overpressure kerja PS: 25 bar Persyaratan operasional Versi berpendingin air Koneksi air pendingin diperlukan Koneksi udara bertekanan diperlukan Pengoperasian hanya memungkinkan dengan air pendingin dan udara bertekanan Tekanan masuk air pendingin: 3 - 6 bar Perlengkapan Panel kontrol CTS Sistem pengaturan dan pengawasan mikroprosesor Mode program Tampilan digital nilai set dan nilai aktual Antarmuka RS232 Antarmuka RS485 Kontak bebas potensial Input dan output digital Ruang panas dan dingin Keranjang bergerak dengan penggerak spindle pengangkat Ruang uji / keranjang dari stainless steel Keranjang dari kawat stainless steel Pipa conduit NW 50 dengan penutup Koneksi udara bertekanan 1/4" male Saluran kondensat R 1/2" female Kunci pengaman pintu Pintu bisa dikunci dengan jendela penglihatan Lingkup pengiriman 1x CTS TSS-70/130 Lemari Uji Kejut Suhu Keranjang / perlengkapan ruang uji Dokumentasi / dokumen yang tersedia Manual operasi Aksesori sesuai gambar Kondisi Bekas Kondisi visual sesuai gambar Unit dapat dinyalakan Pengiriman sesuai gambar. Perubahan dan kesalahan data teknis serta penjualan di tempat sewaktu-waktu dapat terjadi.

Kondisi: sangat baik (bekas), CTS TV-70/530 Lemari Uji Iklim Produsen: CTS Clima Temperatur Systeme GmbH Tipe: TV-70/530 Jenis Mesin: Lemari Uji Iklim / Ruang Shaker Volume ruang uji: sekitar 530 liter Dijual lemari uji iklim bekas dari produsen CTS Clima Temperatur Systeme GmbH. Sistem ini dirancang untuk pengujian kombinasi suhu dan getaran, cocok untuk simulasi lingkungan, pengujian material, uji elektronik, penjaminan mutu, serta pengujian pengembangan dan beban. Catatan: Shaker / penggetar tidak termasuk dalam penawaran. Data Teknis Dimensi ruang uji: sekitar 850 x 730 x 860 mm (L x D x T) Dimensi luar: sekitar 1450 x 2250 x 2000 mm (L x D x T) Berat: sekitar 1.200 kg Rentang suhu: -70 °C hingga +180 °C Kecepatan pemanasan: sekitar 5 K/menit Kecepatan pendinginan: sekitar 5 K/menit Refrigeran: R404A / R23 Daya terpasang: 16 kW Arus nominal: 29,1 A Bsdpjzd Uq Asfx Abvowu Perlengkapan Kamar shaker untuk pengujian kombinasi Ruang uji yang telah dipersiapkan untuk aplikasi getaran Sistem pendingin kaskade Pengujian suhu Aksesori sesuai gambar Area Aplikasi Pengujian suhu Pengujian kombinasi iklim dan getaran Simulasi lingkungan Uji elektronik Pengujian material Penjaminan mutu Penelitian dan pengembangan Ruang Lingkup Pengiriman 1x CTS TV-70/530 Lemari Uji Iklim Ruang lingkup pengiriman sesuai gambar Kondisi Bekas Kondisi visual sesuai gambar Shaker / penggetar tidak termasuk penawaran. Barang, mesin, atau aksesori lain yang tidak secara jelas dijelaskan tidak termasuk dalam pengiriman. Pengiriman seperti yang terlihat pada gambar. Perubahan dan kesalahan data teknis serta penjualan di tempat sebelumnya dapat terjadi.

Kondisi: sangat baik (bekas), Hier we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test chamber volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Power connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components Bedpfxoziyphs Abvewu 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subject to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber C-70/1000-S Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate Test Chamber / Environmental Simulation Cabinet Cooling: water-cooled Description: Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% r.h. Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features: CTS control unit with LCD display Program operation Digital display for set and actual values Observation window in the door Stainless steel test chamber Specimen protection / temperature limiter Internal lighting Side cable ports Ports approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation: Declaration of Conformity Test certificates Bwjdpfx Aoy Iam Hebveu Operating manual Status messages and digital channels Setup plan Quick guide Humidity chart Scope of Delivery: CTS climate test chamber C-70/1000-S Documentation as available Scope of delivery as shown Functional test Refrigerant service Leakage test Condition: Used. Condition as per images. Inspection available by appointment. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please contact us.

Kondisi: sangat baik (bekas), CTS climate chamber / environmental test cell We are offering a CTS climate chamber / environmental test cell for sale. Available from mid-January 2023! Water-cooled Height adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test chamber approx. (W x D x H): 2500 x 2720 x 2200 mm Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Average temperature change rate without radiant heat, measured in the supply air: Heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10°C to +90°C Humidity range: +30% to +95% rH In dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1 to ±3% rH over time Rated voltage: 400 V 3/N, PE, 50 Hz Rated power: 53.5 kW Bjdpfx Abszd R A Uovswu Rated current: 92.3 A Compressor: S6J-16.2 + Chiller (cold water unit) Refrigerant: R404A Weight: 5,500 kg Type: CW-40/16 Condition: used Scope of delivery: (see photo) (Technical specifications are subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 air-cooled version with observation window, test item protection, and documentation For sale: High-quality CTS climate test chamber Type C-70/600 for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade cooling system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Bwodpfx Absy Hkazsvsu Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test item protection / temperature limiter Water connection / deionized water supply Test chamber and condensate drain Tube feedthroughs on the side of the test chamber RS232 interface according to documentation Digital outputs for test item control Test chamber dimensions (according to documentation): approx. 850 x 850 x 830 mm External dimensions (according to documentation): approx. 1900 x 1115 x 1850 mm Weight (according to documentation): approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including available documentation / operating instructions Scope of delivery as shown in the pictures Buyer safety: The device can be inspected by prior arrangement. Loading by forklift can be arranged. For your safety as a buyer, the following work is carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS Type: TSS-70/350-A Water-cooled temperature shock test chamber For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This device is designed for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: - Material testing - Aging tests - Electronic component testing - Temperature shock and alternating temperature tests Technical specifications: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: - CTS control unit with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (hot and cold chamber) - Automatic carriage for shock tests Technical design: - Separate hot and cold chambers - Carriage system for rapid temperature change - Test chamber made of stainless steel - Shelf / wire rack - Viewing window in the door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Bwodpfx Aey Hkgbsbveu Test pressure: approx. 27.5 bar For your safety as a buyer, please note: The following points are carried out on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a premium thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Applications: - Material testing - Aging tests - Electronic and component testing - Thermal shock and temperature cycling tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature constancy: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock tests Without radiant heat Transfer rate: ≤ 15 min in range from -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Bjdjy Hkd Hjpfx Abvjwu Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Site-side protection: 32 A slow-blow Connection: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for customer test item activation - Fault indication via potential-free contact (Load up to 30 VDC, 2 A) - EMC tested Technical design: - Hot and cold chamber - Drawer carriage with spindle drive - Test space / basket made of stainless steel, material no. 1.4301 - Insert basket made of stainless steel wire - Tube feedthrough NW 50 with sealing plug - Compressed air connection 1/4" external thread - Gravity condensate drain, R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation sketch: External dimensions approx.: 2335 x 940 x 1820 mm Installation dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm; Width approx. 480 mm; Depth approx. 660 mm Window: 300 x 300 mm Further data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption per test cycle: approx. 8 kWh For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data reserved!) Further questions? We are happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (purge water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor precooling: 11,432 h Circulation pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS touch/LCD control panel Program mode Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Bwedpfjy H Hmwsx Abvou Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / test certificates (if available) Service before delivery (optional): Functional inspection Refrigerant service Leak test Test run with protocol Condition Used. For visual condition please see pictures. Note Used device, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Kondisi: sangat baik (bekas), Here we offer you a climate test chamber. Water-cooled Test chamber volume: 350 liters Internal dimensions: Height 750 mm x Width 650 mm x Depth 720 mm External dimensions: Height 1800 mm x Width 850 mm x Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.h. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.h. over time up to 90% r.h.; max. ±1 - 3% r.h. over time above 90% r.h. Electrical connection: 400V +6-10%, 3/N, 50Hz Bjdpfxeziyw Es Abvewu Connected load: 13 kW Rated current: 25.5 A Refrigerants: R404A / R23 Weight: 650 kg Type: CS-70/350 Important information for you as a buyer: The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a test run monitored using calibrated instruments. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: baik (bekas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test specimen control Technical Specifications Temperature Tests: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2,500 W at +20°C Bwodpfxezh D E Ro Abveu Approx. 2,500 W at 0°C Approx. 1,800 W at -40°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1,900 mm, Width approx. 1,120 mm, Depth approx. 1,875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For additional questions, we are happy to assist you by phone.

Kondisi: baik (bekas), TS -70/1000-10 Type For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: - Multi-touch control - USB and Ethernet interfaces - Feedthroughs for test cables 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1,000 liters Internal dimensions: Bwedpfxoziizyo Abvju Height approx. 1,000 mm, width approx. 860 mm, depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, width approx. 1,270 mm, depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your safety as the buyer, please note! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) We are happy to answer any further questions you may have by phone.

Kondisi: bekas, Tahun pembuatan: 2023, Perlengkapan: Penandaan CE, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Dijual satu set lengkap peralatan pencetakan digital, yang terdiri dari tiga komponen, yaitu: - Aeoon Compact Series – Mesin pencetak tekstil digital - Aeoon PTB – Unit pra-perlakuan - Sanco CB160T – Pengering kontinu RINCIAN TEKNIS Aeoon Compact Series – Mesin pencetak tekstil digital Produsen: Aeoon Technologies GmbH Model: Compact Series Nomor Seri: 20082560 AHP Tahun Pembuatan: 2023 Berat: 1.900 kg Bwsdpez Duiijfx Abvsu Tegangan: 3×400 VAC + N + PE Konsumsi Daya: 10,6 kVA Frekuensi: 50/60 Hz Negara Pembuatan: Austria Kesesuaian: CE Aeoon PTB – Unit pra-perlakuan Produsen: Aeoon Technologies GmbH Model: PTB (Unit Pra-Perlakuan) Nomor Seri: 30082530 Tahun Pembuatan: 2020 Berat: 250 kg Tegangan: 1×220 V + N + PE Konsumsi Daya: 0,9 kVA Frekuensi: 50/60 Hz Negara Pembuatan: Austria Kesesuaian: CE Sanco CB160T – Pengering kontinu Produsen: Sanco Technology Ltd Model / Tipe Mesin: CB160T Nomor Seri: CB160T-210-4-120-E-0358 Tahun Pembuatan: Juni 2020 Berat: 3.000 kg Tegangan: 3×400 V, 3 fase + N + PE Arus: 100 A Frekuensi: 50/60 Hz Cara Kerja: sepenuhnya elektrik Negara Pembuatan: Inggris Raya Kesesuaian: CE

Kondisi: sangat baik (bekas), CTS Model: CTS CW+40/7/7 Walk-in Climate Test Chamber CTS Walk-in Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate temperature test cell CTS CW+40/7/7 in industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles can be run. The high air circulation ensures an even distribution of climate conditions inside the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions (entire system): Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heater Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Bodpfx Asylmamjbvjwu Weight: approx. 2000 kg Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Tahun pembuatan: 2025, Kondisi: bekas, Lemari Pendingin Produk Susu Gram SKS 64 BÄKO-line Tahun Pembuatan: 2025-02 Kondisi: berfungsi penuh Bwsdpjz A Sq Usfx Abvju Bodi dan bagian dalam terbuat dari baja tahan karat dengan pintu yang dapat dilipat dan menutup sendiri; pencahayaan LED ganda; untuk ukuran loyang 60 x 40 cm (pemasukan dari samping); sistem sirkulasi udara inovatif dengan sistem pembuangan udara mencegah produk menggumpal atau mengering; kontrol elektronik dengan pengoperasian sederhana dan fungsi keamanan untuk perlindungan produk yang optimal; indikator penggantian filter; pencairan dan penguapan air secara otomatis; segel pintu dapat diganti; dapat dikunci; termasuk rel penyangga yang dapat disesuaikan ketinggiannya Ukuran (T x L x D): 200 x 82 x 77 cm Ukuran bagian dalam (T x L x D): 138,6 x 68 x 58,5 cm Volume bruto/neto: 603 l / 417 l Rentang suhu: -5 °C hingga +12 °C Koneksi: 230 V / 50 Hz / 234 W Konsumsi: 372 kWh dalam 365 hari Kapasitas pendinginan: 410 W pada -10 °C Jenis refrigeran: R-290 Kelas efisiensi energi: B Berat: 131 kg

Kondisi: siap digunakan (bekas), Perlengkapan: dokumentasi / manual, Kami menawarkan kabin peledakan Škoda. Bwodpjzrmqdefx Abvju Perangkat berfungsi penuh dan siap digunakan. Tersedia opsi untuk pengujian. Ukuran ruang kerja internal – 2900×2900×2900 mm. Kabin dengan sistem pengumpulan abrasif di lantai, serta sistem pengangkutan abrasif ke unit pembersih abrasif + unit peledakan Clemco 200 liter + unit filtrasi. Perangkat lengkap.

Tahun pembuatan: 2020, Kondisi: bekas, Penawaran ini adalah untuk lemari keselamatan biologis Labogene ScanLaf Mars 1500 Kelas II. Unit ini dalam kondisi berfungsi penuh dan siap digunakan segera. Labogene ScanLaf Mars 1500 adalah lemari keselamatan biologis Kelas II yang dirancang untuk memberikan perlindungan bagi operator, produk, dan lingkungan. Fiturnya meliputi filtrasi HEPA, aliran udara laminar vertikal, jendela depan bermotor, dan pencahayaan yang dapat disesuaikan. Bwsdpjz D Dl Tjfx Abveu Lebar ruang kerja adalah 1500 mm dan lemari ini diproduksi serta diuji sesuai dengan persyaratan EN 12469. Dimensi eksternal kira-kira 1604 x 797 x 2033 mm dan beratnya kira-kira 275 kg, tidak termasuk dudukan. Laporan Transparansi dan Audit Teknis: Pengungkapan Perangkat Lunak dan Media: Sebagai aset yang langsung dari laboratorium, setiap media atau aksesori perangkat lunak asli yang ditemukan bersama unit akan disertakan sebagai fasilitas tambahan. Pemberitahuan Lisensi: Kami tidak menyediakan, mentransfer, atau menjamin lisensi atau kunci perangkat lunak. Pembeli bertanggung jawab atas semua perizinan perangkat lunak, pendaftaran, dan kompatibilitas stasiun kerja melalui produsen. Pemberitahuan untuk Pengadaan: Unit ini dijual dalam kondisi apa adanya. Meskipun kami memverifikasi status daya dan integritas fisik, kami tidak melakukan validasi analitis, pengujian cairan, atau kalibrasi operasional. Ideal untuk laboratorium yang memiliki keahlian teknis internal atau perjanjian layanan yang sudah ada. Dampak Keberlanjutan: Dengan memilih penggunaan kembali langsung, fasilitas Anda menghindari jejak karbon dari produksi baru dan mencegah bahan khusus masuk ke dalam aliran limbah. Penggunaan kembali langsung ke laboratorium adalah cara paling efisien dalam hal karbon untuk melengkapi laboratorium modern.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, Dijual: Mesin pusat demo DROP AG – sistem pemaparan laser digital Phoenix 1213V CtS dengan ukuran saringan maksimum 1200 x 1300 mm. Resolusi 2540 dpi dengan opsi PDF vektor – hingga 12700 DPI. Laser 30 watt dengan panjang gelombang 405 nm. Teknologi DMD 4° dengan perangkat lunak TILT. Opsi inline, mesin juga dapat dimuat secara manual. Cocok untuk saringan dengan ketebalan bingkai hingga 60 mm. Bwedpfx Absw T Sfkeveu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 640 mm, model controller: SIEMENS 840 D, kecepatan spindel (maks.): 10.000 rpm, RINCIAN TEKNIS Jarak perjalanan sumbu X: 1.100 mm Jarak perjalanan sumbu Y: 500 mm Jarak perjalanan sumbu Z: 640 mm Jumlah palet: 2 Ukuran meja: 2 × 1.000 × 450 mm Kapasitas beban meja: 600 kg Rentang kecepatan putaran: 50–10.000 RPM Daya penggerak: 18,5 kW Pemasangan perkakas: DIN 69871 / ISO 40 Rentang umpan X/Y/Z: hingga 10.000 mm/menit Kecepatan cepat pada semua sumbu: 30 m/menit RINCIAN MESIN Pengendali jalur CNC: SIEMENS 840 D Jumlah tempat perkakas: 30 Dimensi dan berat mesin Dimensi mesin P × L × T: sekitar 3.605 × 3.041 × 3.220 mm Berat mesin: sekitar 6.700 kg PERLENGKAPAN Pengubah palet ganda Pengubah perkakas 30 posisi Bwedsz Ibb Topfx Abvju Pasokan pendingin internal (IKZ) Kabinet pelindung penuh dengan pintu pelindung yang diamankan secara elektrik Rel linier dengan sepatu penggulung ganda untuk penyerapan torsi tinggi yang seragam ke segala arah Sekrup bola pada semua 3 sumbu Rangka mesin dari besi cor Meehanit untuk presisi, kekakuan, dan peredaman getaran yang tinggi Konveyor serpihan artikulasi dengan sistem pendingin terintegrasi Persiapan untuk sumbu ke-4 Sesuai dengan standar CE

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, model controller: Heidenhain TNC 410, kecepatan rotasi (maks.): 10.000 rpm, RINCIAN TEKNIS Jarak gerak sumbu X: 800 mm Jarak gerak sumbu Y: 500 mm Jarak gerak sumbu Z: 500 mm Bwsdpfxoz Hxcle Abvou Rentang kecepatan: 0–10.000 RPM Pengaturan kecepatan: variabel Pemasangan perkakas: SK 40 Jumlah tempat majalah: 20 RINCIAN MESIN Pengendali: Heidenhain TNC 410 Luas permukaan penjepit: 1.000 × 500 mm PERALATAN Meja sudut tetap Pengganti perkakas vertikal Kabinet pelindung penuh dengan pintu geser dan lampu interior Berbagai jenis pemasangan perkakas SK 40 Roda tangan elektronik Sistem pendingin dengan pompa yang diperkuat Tekanan pendingin: 20 bar Konveyor serpihan Panduan pengoperasian

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Mesin temper kaca untuk ketebalan dari 3,8 hingga 19 mm. Dimensi maksimum kaca: 2440 x 4500 mm. Bwsdpfx Asx Trg Ajbvsu

Kondisi: sangat baik (bekas), LDS / CTS Vibration Test System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration test system consisting of an LDS shaker system, LDS SPA30KCE power amplifier, IMV K2+ vibration controller, and a CTS climatic chamber. Suitable for combined vibration and climate testing in automotive, aerospace, electronics testing, R&D, materials testing, as well as industrial quality assurance. Note: The blue overhead crane/gantry crane visible in the pictures is not included in the scope of delivery. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load handling: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. connected load: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: - Sine - Resonance dwell - Limit control - Random - Sine-on-random - PSD limit control - Shock - Scheduler - System monitor CTS Climatic Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70°C to +180°C Humidity range: 10% to 95% RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerants: R452A: 6.8 kg R23: 2.1 kg Equipment - Combined climate and vibration testing - Slip table / mounting table included - Fully wired test system - Service and maintenance documentation available Bwjdpfxey Sy Nps Abvou Slip table: Clamping surface: approx. 760 x 850 mm Threaded bushing distance: approx. 100 mm Dimensions / Weight Large industrial plant / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport only via suitable heavy-duty freight forwarder. Dimensions, weights, and technical data are partly estimated and may not be fully known. Condition Used industrial system from industrial operation. Cosmetic condition as shown in pictures. Inspection and testing on site possible by arrangement. Scope of delivery - LDS V850-440 LPT 750C shaker system - LDS SPA30KCE power amplifier - IMV K2+ vibration controller - Dell Precision PC system - CTS climatic chamber CV-70/1100-5 - Slip table / mounting table - Accessories and documentation as per pictures Not included: - Blue overhead crane / gantry crane Loading possible by arrangement. Commercial sale without warranty. Subject to change, error, and prior sale.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 623 h, JCB 8008 CTS, alat berat mini, buatan tahun 2021, hanya dengan 623 jam kerja! ----* Produsen: JCB * Tipe: 8008 CTS * Tahun Pembuatan: 2021 * Jumlah Jam Kerja: sekitar 623 * Berat Operasional: 950 KG * Termasuk: 3 x bucket * Rantai yang dapat diperlebar * Kondisi bagus * Video tersedia berdasarkan permintaan (WhatsApp Erik) Bwjdpez Exnlsfx Abvsu * Harga: 9.500 Euro, belum termasuk PPN 19%. ----Untuk pertanyaan lebih lanjut, silakan hubungi: Untuk pertanyaan lebih lanjut, silakan hubungi: Erik Kortum: WhatsApp Semua informasi tanpa jaminan dan garansi, kesalahan dan penjualan antara waktu disediakan.