Beli Kaltenbach Kks 350 bekas (114)

Tahun pembuatan: 2010, Kondisi: bekas, nomor mesin/kendaraan: 0302-250004, Kaltenbach KBS 1010 - KDS 1015 drilling and sawing system, year of manufacture 2010. The Kaltenbach drilling and sawing system is a combination consisting of a Kaltenbach KBS 1010DG double mitre band saw and a KDS 1015 beam drilling unit. Gsdpfx Asv Rmnkedqouh

Kondisi: bekas, Tahun pembuatan: 1975, Saw blade diameter: 400 mm Cutting diameter: 130 mm Stroke: 135 mm Saw blade diameter: 370/400 mm Gujdpfevp Sdzox Adqjh Feed rate: 0–500 mm/min Cutting speed: 1400/2800 rpm Miter range: 0–180° Cutting capacity at 90° (square): 120 x 120 mm Cutting capacity at 90° (flat): 280 x 70 mm Cutting capacity at 45° (square): 105 mm Roller width: 185 mm Compressed air connection: 8 bar Total power requirement: 3.7/4.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.3 x 1.1 x 1.7 m Robust semi-automatic light-metal profile miter saw with upward cutting action and pneumatic workpiece clamping from above. Saw bridge adjustable front to back, individual rear stop rails adjustable left and right. Year of manufacture is ESTIMATED! Any additional safety guards required must be installed by the buyer. This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: bekas, Saw blade diameter: 370 mm Cutting capacity round: 115 mm Cutting capacity square: 105 mm Gedpfx Asd Il A Ijdqouh Cutting capacity flat: 70 x 240 mm Minimum cut-off length: 730 mm Maximum cut-off length: 4000 mm Saw blade speeds: 1250 / 2500 rpm Table swivels: 180° Stroke: 120 mm Infinitely variable feed: 0 - 500 mm/min Coolant system Cutting area at 45° (square): 95 mm Cutting area at 45° (flat): 50 x 200 mm Cutting speed: 1250 / 2500 m/min Machine weight approx. 1.1 t Space requirement approx. 5.00 x 1.30 x 2.00 m Double mitre circular saw for aluminium consisting of two SKL 370 circular saw machines mounted on a common travel frame; one machine is moveable. - Factory no.: 28232 and 28233 - Pneumatic vice - Spray mist cooling system

Kondisi: baik (bekas), Tahun pembuatan: 1976, Semi-automatic cold circular saw Godpsqxamgsfx Adqjuh Manufacturer: KALTENBACH Type: MSK 400 Year: 1976 with roller conveyor. Cutting capacity Round material max: 135 mm Flat material max: 200 x 80 mm Machine in good condition, operating manual included.

Kondisi: sangat baik (bekas), Mitre circular saw, manufacturer KALTENBACH, model TL 250 S, suitable for aluminium and plastic profiles. Saw blade diameter: 250 mm. Godpfx Aomrq Evodqjuh

Tahun pembuatan: 2000, Kondisi: baik (bekas), de Godpfx Adjhkhumsqouh

Tahun pembuatan: 2009, Kondisi: bekas, nomor mesin/kendaraan: 0301-230036, Kaltenbach drilling and sawing system as a combination unit for use in light to heavy steel construction. With this Kaltenbach system, steel sections can be drilled, center-marked, and cut to length in a single operation. Rolled sections such as I-beams, T-sections, U-channels, angle steel, hollow sections, and flat steel are processed here. The system’s drilling unit is equipped with an automatic tool changer on three drill spindles, each accommodating five tool sizes. Tools are positioned with high precision via ball screw spindles and servo motors. The entire system is equipped with a length measuring device. Technical details KDXS 1215 drilling system: • Working range min. 80 x 65 x 10 mm • Working range max. 1200 x 450 mm • 3 drilling units (vertical Y-axis, horizontal Z- and W-axes), each 11.0 kW, frequency-controlled: 33.0 kW total • Automatic tool changer (3 x 5) • Frequency-controlled drive power: 78 kW Gusdpjrr Sq Nsfx Adqoh • Working height: 640 mm • Machine dimensions: 6100 x 1300 x 3730 mm (LxWxH) • CNC control with Profiline 3 software Kaltenbach HDM 1432 high-performance circular saw, designed as a vertical saw with a swivel-mounted design for high cutting capacity of medium and heavy steel sections. Working range at 90° mitre cut: 1200 x 450 mm, mitre adjustment for angle cuts from -45°/90°/+35°. This circular saw unit is equipped with a segment saw blade, diameter 1430 mm. High cutting performance thanks to powerful drive. NC-controlled cutting angle adjustment Feed via ball screw spindle for optimal cutting results and minimal non-productive times.

Kondisi: baik (bekas), diameter mata gergaji: 400 mm, – Double mitre – Minimum quantity lubrication system (MQL) – Protective cap Gusdpfx Aeim Ezgsdqjh – 400V

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 300242, Rentang pemotongan baja bulat pada 90°: 460 mm, panjang total: 2.320 mm, tinggi total: 2.570 mm, lebar total: 3.660 mm, berat keseluruhan: 7.500 kg, Kisaran pemotongan baja persegi pada 90°: 600.460 mm, diameter pemotongan: 460 mm, kebutuhan tinggi: 2.570 mm, persyaratan ruang panjang: 2.320 mm, lebar yang dibutuhkan: 3.660 mm, panjang pemotongan (maks.): 9.999 mm, tinggi kerja: 720 mm, panjang bagian (maks.): 9.999 mm, panjang bagian (min.): 8 mm, daya pompa pendingin: 180 W, penggerak gergaji: 9.200 W, lebar bukaan: 600 mm, lebar pita gergaji: 54 mm, panjang mata gergaji pita: 7.470 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, BANDSAW KBR 460 NA The KALTENBACH KBR 460 NA bandsaw is a metal-cutting bandsaw that combines high precision, power, and automation. This machine is engineered for demanding manufacturing and industrial environments. • High performance – a powerful main motor (7.5 or 9.2 kW) ensures efficient and rapid cutting. • Precision – steplessly adjustable cutting speed delivers perfect adaptation to any material. • Wide cutting capacity – processes round materials up to Ø 460 mm and square materials up to 600 x 460 mm! • Automated operation – programmable cut lengths up to 9,999.9 mm eliminate the need for manual handling. • Minimal waste – the automatic system enables a remnant length as short as 30 mm! • Stable and durable construction – weighing 7,500 kg for reliability and long service life. Gusdpfx Aov Irtgsdqsh TECHNICAL SPECIFICATIONS Weight: approx. 7,500 kg Dimensions (L/W/H): 2,320 x 3,660 x 2,570 mm Width with swarf conveyor (option): 4,650 mm Saw Blade Dimensions: 7,470 x 54 x 1.3 mm Cutting speed: stepless adjustment (approx. 1–7) Working Range Material dimensions • Round material: max. Ø 460 mm • Square material (W x H): max. 600 x 460 mm Cut Lengths • Per single stroke: min. 8 – 760 mm • Multiple strokes: max. 9,999.9 mm Minimum remnant length in automatic mode: 30 mm Working height: 720 mm Electrical Data • Main motor: 7.5 or 9.2 kW • Hydraulic motor: 2.2 kW • Coolant pump: 0.18 kW • Swarf conveyor (option): 0.18 kW • Roller conveyor drive (option): 0.18 kW • NC positioning unit (option): 0.37 kW

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Kaltenbach / APS CNC Flachstahl- und Winkelstanz-/Schneidanlage – Baujahr 2000. Guodpfx Adeirakrsqoh Kapazität Flachstahl: 500 mm. Winkel: 60 mm x 160 mm. 3-fach-Stanze. Horizontale Stanzvorrichtung. 12 m Greifervorschub. Gehrungsschnitt.

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Gedpfxohzbipe Adqouh Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter bor: 32 mm, tinggi produk (maks.): 330 mm, tinggi produk (min.): 5 mm, lebar produk (maks.): 625 mm, lebar produk (min.): 35 mm, kecepatan rotasi (maks.): 1.600 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Guodpfxjvzp Uzs Adqjh Machine Type: CNC drilling system for wide flange beams & welded I-sections Working Range: 35 x 5 - 625 x 330 mm Drilling Data Drilling Spindles Vertical Y / Horizontal Z+W: 1 / 2 units Drilling Diameter (HSS): 6 - 31.75 mm Drilling Length: 130 - 290 mm Drilling Stroke: 120 mm Spindle Speeds: 200 - 1,600 rpm Rapid Traverse/Return: 10,000 mm/min Drilling Feed: 20 - 160 mm/min Rapid Positioning Speed: 10,000 mm/min Tool Change Tool Change: manual Tool Holders (3 x 1): 3 units Drive Power 3 Drilling Drives: 5.5 kW (frequency-controlled) Total Output: 16.5 kW 6 Positioning Drives: 0.75 kW Total Output: 4.5 kW Working Environment Working height above floor: 640 mm Conveyor System Cross transport on infeed side: 6 liftable conveyor chains, depth: 3.6 m Infeed roller conveyor: length 12.1 m for material Outfeed roller conveyor: length 6.1 m for material Cross transport on outfeed side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for infeed and outfeed MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating Voltage: 400 V / 50 Hz Connection: 3 phase + earth Supply Line Protection: 35 A (slow-acting) Power Consumption (max.): 16 kVA Power Consumption (nominal): 13 kVA / 25 A Compressed Air & Air Consumption Compressed Air Connection: 6 - 8 bar (customer side for air cooling) Air Consumption: 250 l/min at 6 bar EQUIPMENT - KDE 603 DSTV+ beam drilling machine module for nested data import - KBS 620 DG mitre band saw - Cut monitoring system - Length measuring system Model: M 120 PP - T12 conveyor system - Safety enclosure

Tahun pembuatan: 1996, Kondisi: bekas,

Kondisi: baik (bekas), Tahun pembuatan: 1999, LINIE CNC DO PUNKTOWANIA / WIERCENIA / CIĘCIA DO PROFILI KĄTOWYCH I BLACH DANE TECHNICZNE UKŁAD PUNKTOWANIA SPECYFIKACJA MATERIAŁU próbka materiału: stal 52 wymiary blachy (MM) X (MM) maks. 300 x 25 próbka materiału: stal 37 wymiary blachy (MM) X (MM) min. 60 x 6 maks. 400 x 20 wymiary kątownika min. 50 x 50 x 5 maks. 150 x 150 x 5 Informacje o stemplowaniu Gsdpfx Adovkphgjqouh TYP P2-XXX-XX ilość 2 TYP P3-XXX-XX ilość 3 TYP P5-XXX-XX ilość 5 siła wykrawania (tona) 110 średnica wykrawania (mm) x grubość (mm) maks. 32 x 20 Jednostka cięcia siła cięcia (tona) 180 wydajność maks. 400 x 20 Jednostka znakowania łączna liczba znaków: 40 maksymalna liczba znaków na operację: 12 DANE PRZYŁĄCZENIOWE Napięcie 3 fazy + Neutralny + Uziemienie V 3 x 400 Zabezpieczenie A 63 zwłoczne Moc kW 25 Częstotliwość Hz 50 Dopuszczalna tolerancja napięcia zasilającego % +/- 10 Kierunek obrotów: Prawy Ciśnienie powietrza bar 6-8 Wydajność powietrza m3/godz. 250