Garis pemotongan-pengeboran Kaltenbach HDM 1431
Kaltenbach HDM1431

Name: Kaltenbach HDM1431
Brand: Kaltenbach
Availability: InStock

Tahun pembuatan

2002

Kondisi

Bekas

Lokasi

Balaguer

Garis pemotongan-pengeboran Kaltenbach HDM 1431 Kaltenbach HDM1431

Tampilkan peta

Data mesin

Nama mesin:: Garis pemotongan-pengeboran Kaltenbach HDM 1431

Pabrikan:: Kaltenbach

Model:: HDM1431

Tahun pembuatan:: 2002

Kondisi:: diremaj di bengkel (bekas)

Harga & Lokasi

Lokasi:: Calle mestral, 8, 25600 Balaguer, España

Hubungi

Rincian penawaran

ID iklan:: A6980844

Nomor referensi:: Linea corte taladro Kaltenbach HDM 1431 - KDX 1215

Pembaruan:: terakhir pada 28.03.2024

Deskripsi

Beam cutting, drilling, and marking line

CIRCULAR SAW

Brand: KALTENBACH

Model: HDM 1431 / T13 / SP-CNC

Year: 2002

Serial No.: 122,400

Weight without accessories: 10,980kg

- Circular saw with downward cutting motion.

- Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing.

- Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath.

- Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke.

- Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation.

- Vertical clamping block with self-adjusting pressure plate.

- Mitre cutting device for adjusting the angle from 45° left to 35° right.

- Material sensor for automatic switch from rapid to working feed.

- Hydraulically liftable feed roller for optimal material transport across the saw table.

- Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles.

- Chip collector installed on the machine frame.

Specifications:

- Saw blade housing: 100x4x30x250mm
- Saw blade diameter: 1,430mm
- Cutting width: 9.5mm
- Cutting speed: 10 to 20m/min
- Saw feed rate: 0-400mm/min
- Rapid return speed: 2,000mm/min
- Total power: 25KW
- Working height: 640mm

Cutting Capacities:

90º Cuts
- Angle steel: 250mm
- U steel: 400mm
- Double-T beam: 600mm
- Wide flange beams: 1,008x302mm
- Special wide flange beams: 1,000x450mm

Mitre Cuts:

IPBv beam
- 75º: 1,008x302mm
- 60º: 910x302mm
- 45º: 716x304mm
- 40º: 716x304mm
- 35º: 478x307mm

IPBs beam
- 75º: 1,008x402mm
- 45º: 524x357mm

IPE beam
- 45º: 600x220mm

DRILLING UNIT

Brand: Kaltenbach

Model: KDX 1215

Serial No.: 122,401

Working Capacities:
- Angle steel (min - max): 80x65x10mm - 250x250x28mm
- U steel (min - max): 80x45mm - 400x110mm
- Double-T beam (min - max): 80x46mm - 600x220mm
- Wide flange beam (min - max): 100x100mm - 1,008x302mm
- Extra wide flange beam: 1,200x500mm

Drilling units: 3
- Vertical (Y axis): 1 unit
- Horizontal (Z and W axes): 2 units

Drilling diameter: 8 - 40mm

RPM: 150 - 1100

Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min

Drilling spindle feed: 0-500mm/min

Rapid spindle positioning: 15,000mm/min

Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools

Total power: 45KW

MARKING UNIT

FEED SYSTEM:

- 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors

- 30 meters with roller conveyors for outfeed + 6 side arms

- 4 side arms for small parts

- The majority of rollers are powered

Dksdpfx Ahshzbipouek
- The total length required for infeed to outfeed is approximately 60 linear meters.

*Please request machine installation layout drawings.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2022

89 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+34 973 4... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Sistem kompresor Atlas Copco GA45 VSD+/GA45 VSD FF/FX15

Jerman

11.023 km

Sistem kompresor
Atlas CopcoGA45 VSD+/GA45 VSD FF/FX15

Hubungi

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Dsdpfx Ajxdc Uvohuokk

Lihat detail

Iklan kecil

Mesin bor dan penggilingan Ficep EXCALIBUR - 1201 DE 601 3 machines in stock

Ulft

11.283 km

Mesin bor dan penggilingan
FicepEXCALIBUR - 1201 DE 601 3 machines in stock

€85.000

harga tetap ditambah PPN

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been completely cleaned and inspected. The drilling machine features a numerically controlled drilling unit that moves in the longitudinal direction (X-axis), with an adjustment range of 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: - Profiled and flat steel support with guide rail and fixed table, total length 15 m Dkodjv Iamzopfx Ahuek - Mobile drilling unit for longitudinal positioning along the workpieces - Horizontal drill head with single spindle - Additional drill head storage in X-axis direction - Clamping device for securing material - Position detection device - Maximum profile size: 1200 x 1200 mm - Number of drill spindles: 1 pc - Drilling diameter: 5 - 40 mm - Thread cutting: M6 - M30 - Spindle speed: 180 - 3000 rpm - Holder: HSK A80 - Tool changer: 1 x 6 For more information, please contact us.

Lihat detail

Iklan kecil

Meluruskan pers Hidrolik press 150 ton Tigermetal Werkstattpresse 150 Tonnen WH150

Düsseldorf

11.273 km

Meluruskan pers Hidrolik press 150 ton
TigermetalWerkstattpresse 150 Tonnen WH150

€9.499

harga tetap ditambah PPN

Hubungi

Kondisi: baru, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! Straightening Press 150 tons with electric motor and additional manual hand operation via lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We can also build a custom press according to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode using a lever to raise and lower it. For precision tasks (e.g., pressing bearings, straightening, etc.), the press also features a manual hand pump, allowing you to finely adjust the force manually. The pressure cylinder is mounted on a sliding carriage, which allows it to be laterally shifted. This enables you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Pull chains for easy height adjustment - Heavy-duty machine frame - Laterally adjustable cylinder (mounted on sliding carriage) The press can be tested under power at our location. ----- Numerous other workshop presses available in various designs, sizes, and with optional additional equipment! 30, 60, 100, 150, 180, 200 tons. ----- Simply contact us for a non-binding consultation. The stated price is net, plus 19% VAT. All information provided without guarantee. Europe-wide delivery possible! ----- The European Commission provides a platform for online dispute resolution (OS platform). Djdpfof Sqckox Ahuokk This offer serves solely as an online presentation of our products. Contract negotiations take place through telecommunications (email, fax, phone, messaging portal). We will first provide you with a non-binding offer, which will include our general terms and conditions and cancellation policy with company information, prior to purchase or conclusion of contract.

Lihat detail

Iklan kecil

Hydraulische-tafelschere-3000x20mm-schwere-blechtafelschere-tafel-blechschere STEINER HTS 30 / 20 R

Hessisch Lichtenau

11.072 km

Hydraulische-tafelschere-3000x20mm-schwere-blechtafelschere-tafel-blechschere
STEINERHTS 30 / 20 R

€29.500

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of Manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, CNC-controlled Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for operator protection - 3 material support arms with ball rollers Dksdpfx Aod Hxx Aohuek - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine in extremely solid design Footprint of base machine (L x W x H): 4650 x 2610 x 3200 mm Weight of base machine: 27,000 kg Transport dimensions (base machine): 4650 x 2610 x 3200 mm Transport dimensions (additional): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected in storage at 37235 Hessisch Lichtenau, trial cuts possible. Currently, the hold-downs are being resealed, so a corresponding price adjustment will take place in the next few days.

Lihat detail

Iklan kecil

Mesin bubut tipe Swiss CNC DMG MORI SPRINT 20/5

Contamine-sur-Arve

11.428 km

Mesin bubut tipe Swiss CNC
DMG MORISPRINT 20/5

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 180 [mm] Djdpfxjuha Slo Ahuskk - Spindle speed: 10,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [deg] BUSH HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Travel X/Y: 50/325 [mm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Power-on hours: 31,902 [h] - Spindle hours: 12,146 [h] EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Part catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Lihat detail

Iklan kecil

Werkendam

11.385 km

Crane portal
Bollegraaf30 ton

Hubungi

Iklan kecil

Mesin tekuk bulat hidrolik 2500 × 16 mm KUMLA PV 7 H 2500 x 16 mm

Hilchenbach

11.186 km

Mesin tekuk bulat hidrolik 2500 × 16 mm
KUMLAPV 7 H 2500 x 16 mm

Hubungi

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 804, panjang rol: 2.550 mm, lebar kerja: 2.500 mm, ketebalan lembaran (maks.): 16 mm, ketebalan pelat baja (maks.): 16 mm, berat keseluruhan: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair platform can be purchased to go with the machine. Dksdpfx Asvxbm Rohuok

Lihat detail

Iklan kecil

Gussago

11.149 km

Inverter ORT RP30U
ORTRP30U inverter

Hubungi

Iklan kecil

JALUR SISTEM PEMISAH PENGGERGAJIAN / PENGEBORAN CNC VOORTMAN V630 / VB1050

Wellingborough

11.732 km

JALUR SISTEM PEMISAH PENGGERGAJIAN / PENGEBORAN CNC
VOORTMANV630 / VB1050

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2007, DE-Übersetzung-Text: Dkedpfsvpafyox Ahuek BOHRMASCHINE Arbeitsbereich V630/1000M Min. / Max. Höhe 10 – 450 mm Min. / Max. Breite 60 – 1.050 mm Max. Positioniergewicht 9.000 kg Anzahl der Bohraggregate 3x Automatischer Werkzeugwechsler 3x (jeweils 5 Plätze) Höhenmessung Inklusive Breitenmessung Inklusive Maschinengewicht 12.000 kg Walzenvorschub-Messsystem Max. Vorschubgeschwindigkeit 42 m/min Min. Einlauf-Länge 1.500 mm Bohraggregat VD40 Vorschub und Positionierung Servomotoren mit Servo-Umrichtern Spindeldrehzahl Stufenlos 100 – 2.500 U/min (Servomotoren) Schmierung Innen, Öl-/Luftnebel Werkzeugaufnahme SK 40 Bohrdurchmesser Ölkanalbohrer 8 – 40 mm Bohrdurchmesser Hartmetallbohrer 13 – 32 mm Gewindeschneiden M8 – M24 Zentrierpunkt-Markierung Ja, auf 3 Seiten SÄGEMASCHINE Sägemaschine VB1050 Schnittbereich (HxB) 0° 500 x 1.130 mm Schnittbereich (HxB) +/- 15° 500 x 1.060 mm Schnittbereich (HxB) +/- 30° 500 x 925 mm Schnittbereich (HxB) +/- 45° 500 x 725 mm Schnittbereich (HxB) +/- 60° 500 x 470 mm Sägebandgeschwindigkeit, stufenlos 40 – 120 m/min Sägemotorleistung 7,5 kW Sägeband-Abmessungen 9.550 x 54 x 1,6 mm Hydraulische Bandspannung 48.000 N Maschinengewicht ca. 8.500 kg

Lihat detail

Iklan kecil