Beli Karangan Bunga bekas (954)

Kondisi: baru, Tahun pembuatan: 2025, Holzkraft Combined Planer-Thicknesser Machine - Immediately Available - Ideal for demanding craftsmen and joiners The particularly long jointer tables made from a single piece enable easy planing of workpieces The worktables are made of cast iron, making them resistant and permanently flat Jointer tables open simultaneously to the rear with spring support for quick and convenient conversion Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time The helically grooved steel infeed roller ensures constant and uniform wood feed Rubber outfeed roller at the thicknesser outlet provides consistent wood extraction Material feed with four speeds Thicknessing table height adjustment via handwheel with integrated thickness scale DIGITAL version: with electric thicknessing table height adjustment and digital display On/Off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Provision for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Knsdpoih Dxdofx Aabed Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total table length 2250 mm Max. cutting depth 5 mm Fence length 1200 mm Fence height 150 mm Dust Extraction Connection Extraction port diameter thicknesser 1 x 120 mm Drive Power Main motor 7 kW Installation Information Required space length 2250 mm Required space width/depth 1440 mm Note: The specified dimensions account for the maximum travel paths or usable lengths. Thicknesser Thicknessing table length 850 mm Thicknessing table width 520 mm Min. working height 3 mm Max. working height 240 mm Min. working length 220 mm Max. cutting depth 5 mm Electrical Data Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Max. planing width 520 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - Immediately Available -

Kondisi: bekas, Technical Details: Round steel: 32 mm Square steel: 30 mm Angle steel: 90 x 8 mm Flat steel: 100 x 18 mm Blade length: 220 mm Shear strokes: max. 30 strokes/min Operating voltage: 220/380-50 V Rated current: 15.8/8.55 A Connected load: 4.8 kW Machine weight approx.: 1.1 t Dimensions LxWxH: 0.8 x 1.2 x 1.3 m Knodpfx Aou Icgheabjd Performance: - Sheet metal: 16 mm - T-profile: at 45°: 65 x 7 mm, right angle: 90 x 8 mm The hydraulic profile steel shear is demonstrable/ready for operation.

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Full-automatic finger jointing line: Type Doppel-Pack with automatic infeed with multiple cross-cut saw with stacking unit Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger jointing possible vertical and horizontal Type of glue: PVAC white glue, double-sided glue application Power supply: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely pre-wired up to the control cabinet. Finger length / optional wood cross-section and glue type can still be customized. Kjdpfxjg D Ugkj Aabend Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (both sides of the part)

Kondisi: baik (bekas), Tahun pembuatan: 2021, lebar perataan: 520 mm, jumlah mata pisau planer: 4, jenis penyesuaian ketinggian: listrik, Perlengkapan: rem mesin, SCM Minimax FS 52ES Mesin Kombinasi Joiner-Thicknesser – 2021 – 7 kW – Indikator Digital – Pengaturan Ketinggian Elektrik – Pisau Tersa Dijual SCM Minimax FS 52ES, tahun pembuatan 2021, dari kepemilikan pribadi (tidak digunakan secara komersial). Fitur: + Joiner dan thicknesser kombinasi + Motor: 7 kW + Lebar penyerutan: 520 mm Knodpfx Aajxrr Tdobjd + Poros pisau Tersa + Indikator digital ketebalan penyerutan + Pengaturan ketinggian elektrik + Meja cor yang solid, operasi halus + Berat: sekitar 700 kg Lokasi: Haldensleben Harga: €8.900 – Pajak marjin Penjualan pribadi – tanpa garansi, tanpa pengembalian. Inspeksi dan uji coba dapat dilakukan berdasarkan kesepakatan. Nomor artikel: 5503511 / 5503501 Stürmer / Holzkraft / SCM

Kondisi: bekas, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Dual 51 Thn. 2022 Gelendong perata spiral Silent Power Motor 7,35 kW dengan rem Lebar perata 505 mm Dimensi penebalan kecil 3 mm, maksimum 255 mm Panjang meja perata 2250 mm Pengaturan tinggi meja elektrik Kecepatan feeding variabel 4 – 16 m/menit Pengambilan serpihan maks. 8 mm Koneksi ekstraksi 140 mm Knedpfx Aaexrwntobod Fenc perata kemiringan 90 – 45 derajat Celah untuk hand pallet truck Manual operasi Dimensi 230 x 100 x 120 cm Berat 900 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 5.065 h, Fungsionalitas: berfungsi sepenuhnya, daya: 901 kW (1.225,02 hp), tinggi total: 2.990 mm, panjang total: 12.000 mm, lebar total: 2.990 mm, bahan bakar: gas rumah tangga H, Perlengkapan: dokumentasi / manual, Zum Verkauf steht ein Erdgas-Blockheizkraftwerk in Containerbauweise sowie ein Kamin mit 3 Zügen: Kurzbeschreibung: CONTAINER BHKW 901 kWe / 928 kWth Gasmotor: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Knodpfx Aaevuz Utsbed Weitere Informationen: - Komplettanlage BHKW im Container (12 x 3 x 3 m), Super Silent-Ausführung, Lackierung RAL7004, inkl. Gemischkühlung und Notkühlsystem als Tischkühler, Glykol-Außenschutzsystem, Oxidationskatalysator, vorbereitet für SCR-System, Inselbetriebsfähigkeit, Profibus DP-Schnittstelle usw. - Entsprechend technischen Zeichnungen, Plänen, R&I-Schemata und Datenblättern - Das Aggregat hat 5.056 Betriebsstunden (Laufzeit: 01/2021 - 12/2021) - Die gesamte BHKW-Anlage befindet sich in einem sehr guten Zustand – regelmäßige Wartung über Premium-Servicevertrag; aktuell durch den Hersteller eingelagert und konserviert. English Translation (professionally adapted): For sale: natural gas combined heat and power (CHP) plant in containerized design and one chimney with 3 ducts. Short description: CONTAINER CHP 901 kWe / 928 kWth Gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Further information: - Complete CHP package in a 12 x 3 x 3 m container, super silent design, painted RAL7004, incl. mixture (combination) cooling and emergency cooling system as table cooler, outdoor glycol protection system, oxidation catalyst, SCR system ready, island operation capability, Profibus DP interface, etc. - As per technical drawings, plans, P&ID diagrams, and data sheets - Genset with 5,056 operating hours (operating period 01/2021 – 12/2021) - Complete CHP unit in very good condition; regularly serviced under a premium service contract. Currently preserved and stored by the manufacturer.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, ST 3 classic F 23 - Combined Saw-Spindle Moulder Machine Features: - With tilting saw blade, tilting spindle moulder, and sliding table made of anodised aluminium - Robust steel and cast iron construction - Large support surface and precision-cast iron table - High-precision sliding table made of anodised aluminium (slide travel 2250 mm) - Large outfeed table (900 x 600 mm) with extendable aluminium telescopic fence - Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°-45° - Saw rip fence with fine adjustment - Stable saw unit and large double-trunnion spindle moulder assembly ensure maximum stability, precision, smooth running, and long service life - Solid and precise machine table made from stress-relieved cast iron - Three spindle speeds, manually adjustable from 3,500 - 10,000 rpm - Spindle with forward and reverse rotation - Standard spindle moulder guard - Two 5.0 kW motors with ample power reserves Cast iron spindle moulder unit: - Secured on both sides at the top - Precision ball bearings at the top - Close to the lever point - Four optimally graduated spindle speeds enable workpiece sharpening Powerful motors: - Industrial motors suitable for continuous operation (100% duty cycle at full load) Scope of delivery: - Spindle moulder guard - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops Technical data: - Dimensions cast iron work table: 1112 x 430 mm - Crosscutting length: 2250 mm - Max. saw blade diameter with/without scoring: 315 mm - Max. cutting height at 90°/45°: 100/70 mm - Max. crosscut width: 2660 mm - Saw blade tilt: 90° - 45° - Cutting width: 900 mm - Speed: 4000 rpm - Spindle moulder: - - Spindle tilt: 90° - 45° - Useful spindle length: 100 mm - Max. tool diameter: 210 mm - Max. tenon tool diameter: 275 mm - Max. retractable tool diameter: 180 mm - Speeds: 3,500/7,000/10,000 rpm - General: - - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) - Weight: 470 kg - Extraction port diameter: 2 x 120 mm - Extraction port diameter (blade guard): 60 mm Knjdecnwydopfx Aabsd Location: In stock at 54634 Bitburg - Available immediately -

Kondisi: bekas, Tahun pembuatan: 1993, en-001 Kodpfx Aou Ickysabond

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Fully Automatic Finger Jointing Line: Model Double-Pack Machine is dismantled Machine will be inspected with functional guarantee Specification: Wood input length: min. 150 mm max. 1000 mm average approx. 400 mm Wood cross section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross section with 10 mm finger size: Hardwood: 120 cm² Softwood: 150 cm² Finger joint profile: vertical and horizontal Type of glue: PVAC white glue, double-sided glue application Electrics: Kodpfx Aaoncd Utobjnd Connection voltage: 400 V Control voltage: 24 V 50 Hz System prewired completely up to the control cabinet. Finger length / wood cross section and glue type can still be adjusted upon request. Capacity: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided application With endless bundling package Technical parameters: Input material: Input length (min. - max.): 150–1000 mm Part width (min. - max.): 40–155 mm Part thickness (min. - max.):20–80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Kondisi: bekas, Fungsionalitas: belum diuji, Rentang penjepitan: maks. 240 mm Tinggi potong: maks. 450 mm Kedalaman potong: maks. 380 mm Knsdew Npk Ajpfx Aabjd Daya motor: 2,2 kW

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 919 h,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, WMA WMP 08 Spot Welding Unit in TOP Condition This device shows hardly any signs of use and was only deployed very occasionally. Air-cooled one-hand spot welding unit for vehicle manufacturing, tank construction, steel cabinet production, sheet metalworking, and the wire industry - Trouble-free welding of all types of sheet metal - Galvanized sheets can be welded perfectly thanks to controlled current rise and drop - Air-cooled, but equipped for external water cooling - Tools can be easily changed via standardized rotary couplings - Single connection for welding current cable, control cable, and water cooling - Consistently reproducible welding results via built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Complete process monitoring - Simple, user-friendly operation - All set parameters and process values are visible at a glance - Welding parameters can only be changed by authorized personnel - Configuration and program settings management via central PC possible WMA WMS 108 Microprocessor Thyristor Control - 7 timing steps - 8 programs - Built-in device - Automatic mains frequency detection 50/60 Hz - Power failure-proof parameter storage - 'With/Without Current' switching at the press of a button Additional configuration parameters (locked for users): - Program selection - Step advance contact - Time for step advance - Two-hand lock (check) - Start signal lock - Current flow monitoring - Response threshold - Monitoring time - Power factor adjustment Knedpfx Aexrb Tgoabjd - Delay of 1st half-cycle External Inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke On - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be enabled or locked via configuration parameters. External Outputs (24V, DC unregulated ±20%; switching, max. 5 W): - Solenoid valve for pre-stroke - Solenoid valve for welding - Step advance relay - Ready-for-operation relay Shipping via freight forwarding can be arranged after consultation. #8407

Kondisi: baru, Tahun pembuatan: 2025, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum format sliding table and three spindle speeds for sawing, milling, surface/thickness planing, and optional slot mortising. Features: - Torsion-resistant steel/cast iron construction - Machine table made of cast iron, hardened and ground - Smooth-running anodized aluminum format sliding table, 10-year warranty on guideways wear - Large crosscut frame with extendable aluminum telescopic fence and flip stops - Combination saw jointer fence with 45° quick adjustment - Max. saw blade diameter: 315 mm with optional scoring unit, tiltable 90°-45° - Helical-toothed steel feed roller for uniform wood feed during thickness planing - Four manually adjustable spindle speeds - Standard with forward/reverse spindle rotation - Three independent motors for each working unit Scope of delivery: - Combination surface/parallel fence - Curved milling guard hood - Tersa cutterblock - Anodized aluminum format sliding table - Aluminum fence jaws - Flip stops - Eccentric clamp arm Model: LAB 300 PLUS F 16 Tersa Item no.: 5500314 Technical Data --- Panel Saw --- Cutting length: 1600 mm Kodscnxa Nepfx Aabond Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100 / 79 mm Max. crosscut width left of saw blade: 1660 mm Rip capacity at rip fence: 800 mm Saw arbor speed: 3500 rpm Saw blade tilting: 90° - 45° --- Surface planer --- Working width: 300 mm Planer table length: 1260 mm Cutterblock diameter / no. of knives: 72 mm / 3 pcs --- Thickness planer --- Table size: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. chip removal: 4 mm Feed speed: 7 m/min --- Spindle moulder --- Usable spindle length: 100 mm Max. tool diameter (recessed): 180 mm Max. tenoning tool diameter: 275 mm Max. tool diameter recessed: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor power 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a ball contact system proven millions of times Permanently easy-running thanks to hardened and ground guides Not susceptible to dust and dirt due to minimal contact area between ball and rail 10-year Holzkraft warranty against wear on the HM-guideways Extraction Hose Connection The extraction ports of the surface planer (1) and thickness planer (2) point in the same direction. This allows the extraction hose to be connected from the same side for both planing operations. You do not need a hose running around the machine. Planer Units - Helically toothed steel feed rollers for constant and uniform wood feed - Massive anti-kickback fingers prevent workpiece kickback - 3-knife cutterblock ensures optimal planing results.

Kondisi: bekas, 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressing pressure 2 kg/cm² Heating: 2 x 1.8 kW - Wide-belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s Kodpfx Ajxl Ha Soabjnd - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Max. saw blade diameter 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control panel with main switch and emergency stop switches Machine mounted on chassis Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale No warranty is given on used machines; the following applies: "sold as seen" Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Kondisi: bekas, Tahun pembuatan: 2015, 1 Kodpfx Aajxllvrjbond

Kondisi: bekas, Tahun pembuatan: 2011, Thread sewing machine with inline endsheet feeder MECCANOTECNICA UNIVERSE Year of manufacture: 2011 For high-quality digital print finishing. The UNIVERSE SEWING completes 3 operations in standard mode: Feeding flat sheets, scoring, folding and gathering, as well as stitching. The UNIVERSE endsheet feeder completes 2 operations: Pressing the fold and gluing the endsheets. Equipment: • Flat sheet feeder • Siemens PC with touchscreen • GigaLynx signature recognition • Folding and gathering station • Thread sewing machine • Band delivery • Transfer to endsheet feeder Knjdpsu Utzyofx Aabjd • Fold press • Endsheet feeder with hotmelt nozzle application and ROBATECH premelter • Delivery belt (Counter reading approx. 9,700,000 sewn products) Technical Specifications: Flat sheet feeder speed: up to 300 flat sheets (A4)/min Mechanical sewing speed: up to 50 folded sheets/min Max. flat sheet size: 420 x 640 mm Min. flat sheet size: 150 x 200 mm Max. folded sheet size: 420 x 320 mm Min. folded sheet size: 150 x 100 mm Max. number of stitches: 10 ...

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 301 h,

Kondisi: bekas, Pemasaran dilakukan karena insolvensi. Seluruh instalasi dibeli pada tahun 2021 dan hanya beroperasi sekitar 3 tahun. Merek: Randek (Swedia) Tahun produksi: 2021 1. Gergaji Tipe: SPL 728 X04 Kontrol: Beckhoff, layar sentuh Bahasa: lihat foto Pemotongan sudut: 0°–360° Pemotongan miring: 90°–28° Ketebalan material maks.: 250 mm Diameter mata gergaji: 700 mm Daya: 7,5 kW 2. Unit pengumpan dengan sistem penumpukan, kanan Tipe: UV130F2X05 Panjang: 13 m Meja angkat: 4.000 kg 3. Unit pengeluaran dengan sistem penumpukan, kiri Tipe: IH106F1X01 Panjang: 10,60 m Meja angkat: 5.500 kg 4. Knsdpfx Ajxqpqkjabod Printer label Merek: ZEBRA Dimensi keseluruhan instalasi sekitar: Panjang 24 m x lebar 3 m

Kondisi: baru, Tahun pembuatan: 2025, Planer-thicknesser minimax fs 41es TERSA Maximum configuration for professional users. Item number 5503431 Brand Holzkraft / SCM Helical-toothed steel infeed roller ensures consistent and uniform material feed, allowing for chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious wood Models with TERSA cutterblock for tool-free, rapid knife changes and exceptionally quiet operation Material feed with two selectable speeds Extra-long surfacing tables for easy and precise straightening of workpieces Kedpfx Aslht Htsabsnd Work tables made from stress-relieved cast iron: resistant to distortion and permanently flat Simultaneously rear-opening surfacing tables for reduced setup times Thicknessing table adjustment via handwheel with numeric indicator for planing height High machine weight ensures maximum precision and smooth operation Powerful industrial motor Sturdy steel/cast iron construction Quality – Made in Italy TECHNICAL DATA Dimensions and weights Length (product): approx. 2200 mm Width/Depth (product): approx. 1160 mm Net weight: approx. 450 kg Surfacing Total table length: 2200 mm Fence length: 1200 mm Working height: 905 mm Fence height: 150 mm Max. depth of cut – surfacing: 5 mm Dust extraction port diameter (thicknessing): 1 x 120 mm Thicknessing Thicknessing table length: 775 mm Max. working height: 240 mm Thicknessing table width: 410 mm Max. depth of cut – thicknessing: 5 mm Min. working height: 3 mm Electrical data Motor power: 5 kW Line frequency: 50 Hz Connection voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5,000 rpm Cutterblock diameter: 95 mm Max. planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY Jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: Ex stock 54634 Bitburg – Immediately available –

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Lini otomatis untuk penyambungan kayu secara longitudinal, meja masuk pada mesin penggiling dengan lebar 600 mm, pembalik otomatis, pengumpan otomatis ke mesin press, mesin press dengan panjang maks. 6 m, kecepatan penyambungan 12 m/menit Kjdpoxp Hxvefx Aabsnd

Kondisi: baru, Tahun pembuatan: 2025, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodized aluminium sliding table Rigid steel/cast iron construction Large support surface and precision cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with up to 2660 mm extendable aluminium telescopic fence with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Robust saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Kedpshp Rdlsfx Aabend Three spindle speeds, manually adjustable from 3500 to 10000 rpm Spindle moulder with reversible rotation Standard arching cutter guard Safety reversing fence jaws made of aluminium Two motors with high performance reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx.: 470 kg Extraction connection Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Electrical data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle moulder Spindle tilt: 0 – -45 ° Useful spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter not retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular saw unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 2660 mm Saw blade tilt: 90 45 ° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 78 mm (Main) saw blade diameter: 315 mm Remark (main) saw blade diameter: independent of scoring blade (Main) saw blade speed: 4000 rpm Sliding table and table Table length: 1112 mm Table width: 430 mm Scope of delivery: Arching cutter guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2025, For sawing, milling, surface/thickness planing, and optionally mortising, all in minimal space. - High-precision format sliding table made of anodized aluminum, various lengths available - Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic stop up to max. 3200 mm, equipped with professional flip stops - Max. saw blade Ø 315 mm, tiltable from 90° to -45° - Wide tilting range of the milling spindle from 90° to -45° backwards - Four spindle speeds up to 10,000 rpm, manually adjustable - Spindle can run in both clockwise and counterclockwise directions - Strongly ribbed surface planing tables made from stress-relieved grey cast iron for decades of stability and flatness - Two-stage feed for thickness planing - Three independent industrial motors for continuous operation - With lockable main switch, motor protection switch - Fixed handwheels Dimensions and Weights Weight (net) approx.: 857 kg Jointer Jointer table width: 410 mm Jointer table length: 2000 mm Max. removal per pass (jointer): 5 mm Extraction Connection Extraction port diameter: 3 x 120 mm Extraction port (blade guard): 60 mm Setup Information Required length: 5960 mm Required width/depth: 5140 mm Note on required space: Dimensions account for maximum travel paths or usable lengths. Working Area Working area length: 1600 mm Working area width/depth: 1600 mm Note on working area: Please add the specified dimensions to the required space to get the recommended free installation area for the machine. Thickness Planer Thickness table length: 757 mm Thickness table width: 423 mm Min. working height: 3 mm Max. working height: 230 mm Max. removal per pass (thicknesser): 5 mm Kedpfx Aaoih Dxljbjnd Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Motor duty cycle: S6 Motor duty cycle: 40% Motor power: 3 x 5.0 kW Sliding Table and Table Format sliding table length: 2660 mm Format sliding table width: 360 mm Format sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm Milling Spindle Spindle tilt: 0 – -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. Cutter Diameter Max. retractable cutter diameter: 210 mm Max. retractable cutter diameter at 45°: 150 mm Max. tenoning cutter diameter: 275 mm Planer Cutterblock Cutterblock type: TERSA Cutterblock diameter: 87 mm Number of knives: 4 drum speed: 5200 rpm Circular Saw Unit Max. rip length: 2600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of the saw blade: 3260 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade protrusion 90°: 100 mm Max. saw blade protrusion 45°: 71 mm Main saw blade diameter: 315 mm Note: with scoring blade Main saw blade speed: 4000 rpm Feed Feed speed: 6 – 12 m/min Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PFS 520 - Surface and thickness planer with 520 mm planing width and motorized thickness table adjustment Ksdpfx Aaebxz S Hobsnd Robust steel and grey cast iron construction Large, ribbed jointer tables made of grey cast iron, stress-relieved to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutter block with precision bearings Helically geared steel infeed roller for especially even and gentle wood feed Outfeed roller with rubber coating Large planing fence, tiltable 90°–45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutter block: Cutter knives can be changed within seconds When the machine starts, the centrifugal force automatically tensions the knives – self-locking The knife projection adjusts itself automatically without any manual setting or screwing The jointer table is adjusted via a robust and precisely guided parallelogram system, ensuring the distance between the table lips and cutter block remains constant in every position The sturdy aluminum planing fence is anodized as standard, easy to move, and provides a large support area The adjustable tilt from 90° to 45° is easily visible from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port position remains the same for both surfacing and thickness planing modes Thus, no further extraction hose or cumbersome replugging and routing around the machine is necessary. Technical Data Total length of jointer tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Planing fence dimensions: 1200 x 190 mm Planing fence tilt range: 90–45° Min./max. planing height: 3/250 mm Cutter block diameter/number of knives: 100 mm / 4 pcs Feed speed: 5/8/12/18 m/min Cutter block speed: 5000 rpm Motor rating: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Tahun pembuatan: 2022, Kondisi: baru, XSD310 400 Volt Weight: 280 kg Surface Planer Planing width: 310 mm Total length of planer tables: 1400 mm Cutterhead diameter: 70 mm Tersa cutterhead RPM: 5500 Planer fence dimensions: 1300 x 150 mm Planer fence tilt adjustment: 90 - 45 degrees Maximum cutting depth: 4 mm Motor power: 4 HP Thickness Planer Thickness table dimensions: 430 x 310 mm Thicknessing height: 230 mm Feed roller diameter: 30 mm Feed speed: 6 m/min Accessories: Tersa cutterhead Handwheel adjustment for thickness table with mechanical display Kodpfx Aasdkl Sqjbond Location: In stock at 54634 Bitburg The machine is on display at our premises and available for immediate delivery.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Combination machine 4-way HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of the saw blade: 2,310 mm Cutting width at parallel fence: 820 mm Saw blade tilting: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutterhead diameter / Number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Knjdpfx Aoci Tvheabed Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter saw blade guard: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg