Beli Grecon bekas (27)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin cross cut optimasi Salvador super push 200 Kdjdpfx Aexp Ig Uedqeu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 450 mm, ketinggian potong (maks.): 80 mm, lebar pemotongan (maks.): 150 mm, penggerak gergaji: 5.500 W, daya: 5,5 kW (7,48 hp), tinggi total: 2.000 mm, panjang total: 20.000 mm, daya motor servo: 5.500 W, lebar total: 2.000 mm, jenis arus masuk: tiga fasa, diameter sambungan ekstraksi: 140 mm, sambungan udara terkompresi: 3,5 batang, berat keseluruhan: 2.500 kg, Sistem cross-cut GreCon tipe 1004 yang dioptimalkan Dengan konveyor lintas masuk Dengan konveyor keluar dengan 10 ejektor Dengan rantai Spesifikasi teknis: Lebar maksimal benda kerja: 250 mm Tebal maksimal benda kerja: 80 mm Diameter pisau: 450 mm Kecepatan pemotongan: 90 m/detik Motor gergaji: 5,5 kW Kontrol poros gergaji: pneumatik Penggerak rantai: servo motor Lebar kerja minimum: 40 mm Panjang input minimum: 500 mm Berat bersih: ± 2500 kg Kdodpfx Aewy Np Uodqeu Kamera SICK LUT pengenalan kapur Stasiun pengenalan kualitas dan panjang serta penyortiran

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 13.000 mm, panjang umpan sumbu Y: 240 mm, panjang umpan sumbu Z: 100 mm, kecepatan pemakanan sumbu X: 25 m/menit, gaya penekanan: 40 t, tegangan masuk: 400 V, tinggi total: 1.120 mm, tinggi kerja: 1.120 mm, panjang spindle milling: 330 mm, tegangan kontrol: 400 V, tinggi benda kerja (maks.): 100 mm, diameter alat: 240 mm, kecepatan rotasi (maks.): 6.000 rpm, tekanan udara: 7 batang, panjang total meja penyerut: 13.000 mm, A2 Kjdpfoxfzyyox Adqjdu

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Kjdowtgcxepfx Adqodu Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Kondisi: bekas, Tahun pembuatan: 2004, WEINIG GRECON DOUBLE-END FINGER JOINTING LINE MOD. PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm Kedpswry I Eefx Adqodu - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scoring saw: 5.5 kW - Year: 2004 CE

Kondisi: baik (bekas), Type FEr LD 180/600/1000 Ksdpfx Adsuhtmieqjdu 100% functional, automatic rotation

Kondisi: sangat baik (bekas), Lini penyambungan kayu Grecon Profijoint Grecon Profijoint Panjang material masuk: 150-700 mm Lebar material: 40-150 mm Tebal kayu: 18-50 mm Mesin tenon tunggal Kemungkinan frais pada garis Kdedpfew Ilryjx Adqou Daya spindle milling: 15 kW Daya spindle penghancur/pemotong: 11 kW Sertifikat CE

Kondisi: bekas, Tahun pembuatan: 2004, Instalasi finger joint setengah otomatis yang ringkas terdiri dari: - Mesin frais PJ 150/500 - Meja transfer untuk penyerahan manual - Press satu kanal PJ 7/6100 li Mesin frais: 2 paket/menit Press: 2 siklus/menit Panjang masuk: 150 – 700 mm Panjang akhir: maks. 6.100 mm Kdsdpjw Nbacofx Adqju

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Grecon Combipact finger jointing line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short timber sections into longer elements using finger joint connections. This process allows the utilization of wood offcuts for the production of high-quality structural components such as beams, scantlings, or panels. Technical specifications: 1. Input length of elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2. Width of elements: - Minimum width: approx. 20-40 mm - Maximum width: approx. 200 mm 3. Thickness of elements: - Minimum thickness: approx. 15-20 mm - Maximum thickness: approx. 80 mm 4. Final length after joining: - Standard maximum length after joining: from 6000 mm 5. Output capacity: - Typical production capacity ranges from 5 to 15 joints per minute, allowing processing of up to 3000 linear meters per hour. Kdsdpfx Ajuiz I Rodqou 6. Type of joints: - Finger joints, precisely manufactured to ensure durable and strong connections. 7. Pressing force: - The hydraulic press usually applies pressure from several to a dozen tons to efficiently bond the elements. 8. Control system: - PLC control system providing process automation with the ability to set various finger jointing parameters. 9. Gluing: - Grecon Combipact lines are equipped with automated glue application systems that accurately dispense the required amount of adhesive. 10. Power supply: - Standard supply: 400 V, 50 Hz

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Ksdpfou Atmuex Adqjdu Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Tahun pembuatan: 2008, Kondisi: bekas, USED GRECON PROFI JOINT FINGER JOINTING LINE MODEL PJ 10/6100 - Workpiece Dimensions: * Min. width: 40 mm; Max. width: 150 mm * Min. thickness: 18 mm; Max. thickness: 50 mm * Min. length: 150 mm; Max. length: 700 mm Ksdpfx Adopbbnxjqsdu COMPRISING: * MOULDER UNIT - No. 2 scoring saws, diameter 200 mm (11 kW) - Chip extractor, diameter 250 mm (7.5 kW) - Cutter group, diameter 250 mm (22 kW) * PRESS UNIT - Min. length: 3000 mm; Max. length: 6100 mm - Hydraulic power unit: 4.4 kW - Cross-cut saw motor power: 2.2 kW - Year: 2008 - Voltage: 400V / 50 Hz - Installation footprint: 13,000 x 5,000 x 2,100 mm (H) - Total weight: 5,800 kg

Kondisi: baik (bekas), Tahun pembuatan: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Infeed table: automatic / throughfeed system Outfeed table 3 ejectors on the left outfeed table. Total length: 15.50 m Kjdpjt Ir Nqofx Adqedu Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Tahun pembuatan: 1998, Kondisi: baik (bekas), GreCon Dimter OPTICUT 204 R Optimizing Cross-Cut Saw – Year of manufacture: 1998 – Full optimization – Marking cut (defect removal) – Width measurement Kjdpfsh Hfknjx Adqsdu – Capability to cut aluminum TECHNICAL SPECIFICATIONS: – Max. cutting length: 4,000 mm – Min. element length: 200 mm – Max. cutting height: 100 mm – Max. cutting width: 260 mm – Saw blade diameter: 500 mm – Motor power: 9 kW – Max. feed speed: 160 m/min – Acceleration: 2 m/s² – Optimization based on length and value – Pneumatic material clamping – Three ejectors – Outfeed tables – Rotary table – Total length: 2,000 cm Transport dimensions: – Length: 1,300 cm – Width: 245 cm – Height: 220 cm – Weight: 3,500 kg

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Workpiece dimensions: 150-1000 x 50-205 x 35-50 mm, Output length: 3000-6000 mm, Connected load: 80 kW, Length: 15,480 mm, Width: 5,500 mm, Height: 2,000 mm, Weight: 10.5 t, including documentation. Kdodsign Efjpfx Adqou

Kondisi: sangat baik (bekas), jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Automatic Grecon Dimter Ultra Finger Jointing Line The machine has undergone a complete overhaul. Specifications: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Spindle diameter: Ø50 mm - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Cutter motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding Table: - Min. board length: 150 mm - Max. board length: 700 mm - Feed rate: Infinitely adjustable Dust Extraction: Chipper extraction nozzle diameter: Ø100 mm Cutter extraction nozzle diameter: Ø150 mm Extraction capacity (flow rate): approx. 2,400 m³/h Pneumatics: Operating pressure: 6 bar Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Lamella width: 25–160 mm - Finished lamella length: approx. 6,000+15-50 mm - Pressing force: 3–7.5 T (3,000–7,500 daN) Kedpfx Adeuddvasqsdu Crosscut Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust Extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (flow rate): approx. 400 m³/h Pneumatics: - Operating pressure: 6 bar - Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Work: 1. Cleaning of machine bodies and application of new paint 2. Replacement with new bearings on: main spindle of tenoner; saw spindle of the press; linear bearings on the tenoner table carriage guide; bearings on conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, assembly of a glue tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for cylinders, solenoid valves, and other pneumatic components in the machines; 7. Replacement of gears and double roller chain on the press’s belt-chain feeder. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders; replacement of worn solenoid valves with new ones. 10. Replacement with new operator panels with graphics on the tenoner control cabinet, press control cabinet, and auxiliary press control panel. 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of machine and press controlling PLCs, adaptation of the machine control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the outfeed table pusher; 14. Overhaul of the electrical installation in the control cabinets, modernization, and drawing of the electrical diagram. 15. Installation of guards, mesh guards, necessary labels, safety stickers, manufacturer’s logo, and nameplates. 16. Replacement with new V-belts, inspection of pulleys, gear motors, and motors; 17. Replacement with new limit switches, inductive sensors, and photoelectric sensors (photo-cells) We specialize in finger jointing machines. Installation, commissioning, and operator training within Poland included in the price; in other countries, available at extra cost. We provide service and access to spare parts.

Kondisi: siap digunakan (bekas), paket_keilzinkenanlage Kdsdpsbqqzgofx Adqou

Kondisi: baik (bekas), We offer a wide range of sawmill machinery. Kdedpfx Adoqzh Injqou

Kondisi: baik (bekas), Grecon finger jointing line - Infeed cross buffer with package formation - 2 linked milling units, 600 mm table width - Each milling unit equipped with glue rollers - Automatic transfer - Continuous throughfeed press Kdodpsh I Dufefx Adqou - Cross-cut saw - Outfeed roller conveyor with lateral transfer Workpiece lengths: 500 – 4,000 mm The line has been dismantled and is available at short notice. The control system is defective; a new control system with program is included (not installed, program untested).

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Grecon Ultra Finger Jointing Line - Made in Germany - Year of manufacture: 2001 - Suitable for softwood and hardwood - Technical documentation (DTR) available TECHNICAL PARAMETERS: Ksdpjrf Ty Ssfx Adqsdu Min./max. element length: 150/1000 mm Min./max. element width: 40/205 mm Min./max. element height: 20/80 mm Min. length / max. width ratio: 2:1 Min./max. starting length: 3000/6100 mm Saw blade motor power: 5.5 kW Saw spindle diameter: 30 mm Milling motor power: 22 kW Milling spindle diameter: 50 mm Total line length: 11,500 mm Width: 5,300 mm Total power consumption: 39 kW Air pressure: 8 bar Air consumption: 660 NL/min Suction nozzle diameter: 250 and 100 mm Extraction requirement: 6,150 m³/h at 30 m/s Transport dimensions: 13,00 m x 2,20 m x 2,00 m Weight: 6,700 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar meja: 300 mm, tinggi potong dengan pisau scoring (maks.): 100 mm, panjang spindle milling: 250 mm, Equipment: - 1 GRECON feeding transfer system with accumulation for 4 to 5 purged lamellae of varying lengths for finger jointing - 1 GRECON double finger jointing system with deep tooth profile (for glulam beams) Kdjdpfx Aewz H Anodqou - 1 180° transfer system with two-component gluing - 1 GRECON finger jointing press - 1 CNC controlled cross-cut saw - 1 outfeed table

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), de Kdsdpfx Asv Utpcsdqju

Kondisi: siap digunakan (bekas), Technische Merkmale Zuführband 600 x 1500 mm 1 Keilzinkenverleimungseinheit mit Drehtisch auf fahrbarem Wagen mit Referenzanschlag Fräs- und Doppel-Leimwalze Kdedottdnaspfx Adqeu Paketbreite: 600 mm Maximale Werkstückhöhe: 180 mm Holzlängen: 200 bis 1000 mm Automatischer Transfer und Wenden der keilgezinkten Werkstücke Vorstapelstation Hydraulische Walzenpresse Schnitteinheit Maximale Holzlänge: 4500 mm Rechtsseitige Austragung auf Tisch Leistung und Motoren Anschluss: Dreiphasig Gesamtmaße

Kondisi: sangat baik (bekas), Optimizing cross-cut system GreCon Type 2004 with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec Saw motor: 5.5 kW Saw spindle control: Pneumatic Chain drive: Servo motor Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Has been completely overhauled and not used since Kjdpfx Aden Hwl Asqodu Location: Austria, near Ried im Innkreis

Kondisi: baru, Tahun pembuatan: 2023, Order comb, tine shape 15 mm Order combs, tine shape 20 mm Finger joint profile Glue application comb Adhesive application comb Glue comb Glue combs Kdjdpfxeiacbps Adqsu >> Delivery time: ex stock

Kondisi: bekas, Milling spindle Kdodpfxeqwgrpo Adqou Milling spindles for dovetail cutters various lengths various models in stock at www.jöma-shop.com Manufacturers: GreCon, Sauter, DIMTER