Beli Karl Schermer bekas (406)

Tahun pembuatan: 1961, Kondisi: bekas, General / technical data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Bwsdpfx Ajlwu Hropcop Year of manufacture: 1961 Weight: approx. 6,500 kg Pulling force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke per machine unit: 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volts / 50 Hz Notes: The machine is powered and available for inspection at our warehouse.

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Machine No.: 1732 Bodpjgyd Svsfx Apcjwp Year of manufacture: 1960 Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Bwedpfxogyd S De Apcjp Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Bwedpfjiw Dlkox Apcsp Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse.

Tahun pembuatan: 1965, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Tool holder on pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil capacity: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint: (W x D x H) approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding workspace) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant/lubricant system Bodpfx Apstuuvzscswp • Manually operated tool traverse • The broaching slide with pull head holder is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal pull head for flat shanks up to max. approx. 40 mm width • Dividing attachment (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for manufacturing keyways with flat broaching tools as well as for profile broaching. Due to the rigid machine bed and robust tool feeder, the machine is very well suited for heavy-duty profile broaching tools. Machine is used and in a condition appropriate for its age. The machine is available for inspection at our warehouse. The machine has just been added to our inventory; it has not yet been technically or visually refurbished. Profile broaching pull heads are available on request, depending on DIN standard, size, and stock condition.

Kondisi: baik (bekas), Tranklein EH I Eckeabschneider Hergestellt in Deutschland. Perfekter Zustand. Dies ist ein professionelles Gerät zum Abrunden von Ecken. Massive Gusskonstruktion und hoher Pressdruck gewährleisten präzisen Betrieb. Wechselbare Messer. Verstellbare Anschläge. Ein Messer mit 4 mm Radius ist im Lieferumfang enthalten. Bwsdpfswunicjx Apcep Stapelhöhe 55 mm Gewicht 32 kg Dies ist das aktuell produzierte Modell.

Kondisi: bekas, Antique knee-lever embossing hot stamping press Karl Krause KHP Year of manufacture: approx. 1930 - Serial No. 48090 Max. embossing area: 340 x 430 mm Gas heating Bwsdpowtw E Djfx Apcop Online video inspection via WhatsApp, MS Zoom, or Telegram. Located in Emskirchen/Nuremberg - Immediately available - Test run possible.

Kondisi: bekas, Embossing Stamping Press - Kniehebelprägepresse Krause KHP Bwjdpevi Hh Isfx Apcjp Stamping area: 350 x 400 mm Very good condition Online video inspection...

Kondisi: bekas, Pappschere / Board Cutter Karl Krause Lever Guillotine PS 120 Bsdpfxot Drm Ij Apcowp Online video inspection via Skype video We would be delighted to welcome your visit – more machines available in stock Available immediately – inspections possible Located in Emskirchen / Nuremberg – can be tested on site

Kondisi: bekas, nomor mesin/kendaraan: 24118, Kniehebelprägepresse – Krause KHP Prägefläche / Stempelgröße: 350 x 400 mm Sehr guter Zustand / Excellent condition Bwodpfx Apout Tkgscjp Online-Video-Inspektion via Skype-Video Wir würden uns sehr über Ihren Besuch freuen – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Vorführung möglich

Kondisi: bekas, nomor mesin/kendaraan: 59062, Rill- und Leimmaschine für Umschläge – Karl Tränklein CGM (b) Creasing & Gluing Machine for Covers, Serial No. 59062/5 Max. working width: 500 mm Bsdpfxsh Axd Ne Apcswp Online video inspection via Skype video possible. We would be pleased to welcome you for an on-site visit – further machines available in stock. Immediately available – inspection possible at any time. Located in Emskirchen, near Nuremberg – machine can be tested on site.

Kondisi: bekas, nomor mesin/kendaraan: 658, Joint-setting machine (Falzeinbrennmaschine) Karl Tränklein FEM 658-58-4 Serial no.: 658-58-4 Working width: 500 mm Online video inspection via Skype available. Bjdpsh Axiijfx Apcowp We would be pleased to welcome your visit – more machines in stock. Available immediately – can be inspected. Located in Emskirchen / Nuremberg – machine can be tested on site.

Kondisi: bekas, Corner punching machine / Corner cutting machine Online video inspection via Skype video We would be pleased to welcome your visit – more machines in stock Available immediately – can be inspected Bsdpfet Drnfex Apcjwp In stock in Emskirchen / Nuremberg – can be tested

Kondisi: bekas, nomor mesin/kendaraan: 608, Falzeinbrennmaschine - Joint-forming machine Karl Tränklein FEM 608-53-6, Serial No. 608-53-6 Working width: 500 mm Online video inspection available via Skype video. We would be pleased to welcome your visit – more machines in stock. Available immediately – can be inspected. Located in Emskirchen / Nuremberg – machine can be tested on site. Bwedpsh Axifefx Apcep

Kondisi: bekas, Antique cutting machine / antique guillotine Bwsdpot Drl Dofx Apcep Online video inspection via Skype video We would be very pleased to welcome you for a visit – additional machines in stock Available immediately – can be inspected Located in Emskirchen / Nuremberg – test run possible

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3305, Hack spring coiling machine / spring manufacturing machine – Model UFA3A – operational – incl. wire decoiler For sale is a used spring coiling machine from Karl Hack Maschinenfabrik, Reutlingen (Germany). This machine was used for the production of compression and tension springs from wire and is a robust industrial-grade unit made in Germany. Machine Details: Manufacturer: Karl Hack Maschinenfabrik Bwsdpfx Ajyucgnepcjp Model: FA3A Serial Number: 3305 Origin: Reutlingen, Germany Patent: DB Patent Condition: used, operational Equipment: including wire decoiler (wire pay-off) various accessories and tools mechanical adjustment and forming units heavy-duty industrial design ideal for spring production / metalworking The machine is currently functional, but due to its age, signs of wear may be present (see photos). Scope of delivery Hack UFA3A spring coiling machine wire decoiler available accessories and tools Note: The sale is made as seen / as shown in the photos. No warranty or guarantee, as this is a private and used sale. Viewing by appointment possible. Loading assistance can be provided.

Kondisi: bekas, Dust extraction fan, exhaust extraction, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, ventilator -Manufacturer: Karl Klein, Radial Fan Type DNG 6-18 L -Motor power: 0.155 kW -Speed: 1400 rpm -Air volume flow: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm -Inlet connection: Ø 145 mm -Outlet connection: 120 x 110 mm -Quantity: 3 blowers available -Price: per unit -Dimensions: 370/340/H320 mm Bwjdpfx Aouqf Ufjpcep -Weight: 8.1 kg/unit.

Kondisi: bekas, Dust extraction fan, exhaust extraction, welding fume extraction, extraction system, fan, pressure blower, vacuum blower, centrifugal fan, ventilation blower, centrifugal blower, blower -Manufacturer: Karl Klein, centrifugal fan type DNG 6-18 -Motor power: 0.155 kW -Speed: 1400 rpm -Volumetric flow rate: 18.5 m³/min -Impeller: Ø 165 x 80 mm -Inlet connection: Ø 145 mm -Outlet connection: 120 x 108 mm -Dimensions: 370/365/H310 mm Bedeun Dwgjpfx Apcjwp -Weight: 8.2 kg

Kondisi: bekas, Thermal system, fan heater, heating elements, radial heating blower - Delivery: as is, in the condition as inspected - Controller/On-Off switch: missing Bwsdpfx Apoub D R Eecop - Heating blower: with temperature display - Heating capacity: unfortunately not specified - Blower: Karl Klein type DNG 1-1.5K - Blower power: 0.45 kW / 31 m³/min - Outlet: Ø 60 mm - Quantity: 3x blowers available - Price: per unit - Dimensions: 320/265/H475 mm - Weight: 10.2 kg/unit

Kondisi: baik (bekas), Dust extraction fan, exhaust extraction, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower, centrifugal fan, ventilation blower, centrifugal blower, blower, ventilator - Manufacturer: Karl Klein, centrifugal fan. - Model: DNG3-9.8/S WS L - Motor power: 0.07–0.16 kW - Speed: 2580–2810 rpm - Air flow rate: 445–485 m³/h - Impeller: Ø 135 x 60 mm - Inlet connection: Ø 100 mm - Outlet connection: 80 x 65 mm - Quantity: 5 units available - Price: per unit - Dimensions: 430/200 (H265) mm Bsdpfx Aew Ava Sspcewp - Weight: 5.8 kg

Kondisi: baik (bekas), Staubabsauggebläse_DMV350 Bjdep A A Saepfx Apcewp

Kondisi: bekas, Thermal System, fan heater, heating elements, radial heater blower -Manufacturer: Karl Klein, fan heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min Bwodpfxjrkp Nxs Apcep -Heating module: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3 blowers available -Price: per unit -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/unit

Kondisi: bekas, Dust extraction blower, exhaust extraction, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower - Unit: sourced from a UV varnish curing system - Motor power: 0.155 kW - Speed: 1400 rpm - Air volume flow: 18.5 m³/min - Pressure increase: 220 Pa - Inlet connection: Ø 140 mm - Outlet connection: 100 mm - Quantity: 3 blowers available - Price: per unit - Dimensions: 380/350/H260 mm Bwjdpfx Asckp Szspcep - Weight: 8.2 kg

Kondisi: sangat baik (bekas), Electrician Workbench ESD workstation Bjdsb A Hk Ujpfx Apcjwp - Dimensions: 1500/750/780 mm - Conductive tabletop with Anka-Plast coating - Suitable for workplaces where electrostatically sensitive components and assemblies are handled - Discharge resistance: according to DIN 51953

Kondisi: baik (bekas), de-001 Bwsdpfxsb A Izde Apcep