Beli Kayu Brikettieren Tekan bekas (17.302)

Kondisi: bekas, Tahun pembuatan: 1999, Langkah 1000 mm Diameter piston 70 mm Hsdpfx Asw Sydfoa Neng

Kondisi: bekas, Tahun pembuatan: 2010, Pressure: 600 t Frame gap: 3640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1550 mm Side frame opening: 2200 mm Bolster area: 3600 x 2500 mm Ram area: 3600 x 2500 mm Ram adjustment: 400 mm Strip width: 2000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1600 x 2.5 mm² Coil weight: 35.0 t Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blanking line / cut-to-length line (press, coil line, blank stacker) Year of manufacture: 1993 - 2010: new Siemens S7 control system - Schuler press, EBS 4-600-3.6-350 with steplessly adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection on ram, pneumatic ram counterbalance, motorized ram adjustment, ram locking Sliding table (2x) without rails for transfer table - Schleicher decoiler, HE - 355 - 2100, year 1994 with auxiliary drive, pressure device, traversable - Coil loading station - Schleicher take-off device - Scrap shear - Schnutz straightener, type RME 18/50/13-2000 TZ, year 1994 with steplessly adjustable drive, 30 intermediate rollers, 117 support rollers - Loop bridge - Schleicher roller feeder, type WV-SYS-A 160-2000, year 1994 Blank stacking system / NSM magnettechnik destacking unit Hnodovut Dyjpfx Aa Nsg Disassembled and stored - video from supplier prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 2024, Exhibition machine Garbsen – new, complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted design - Lamella press beam at the TOP with 6 elements, lamella press beam on the SIDE with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) consist of 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromechanical adjustment of both press beams via precision trapezoidal screw spindles (with increased thread pitch and concentricity accuracy), and high-performance lead nuts with grease reservoir - Pressing occurs electromechanically, via 2 separate helical geared motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and regulated by frequency converters, providing completely wear-free press force control - Pressing force for horizontal press beam: min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press beam: min. 300 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, adjustable by 3-stage selector switch 5 / 10 / 25 mm/sec - Extremely easy operation via 6 individual push buttons, 8 movement sequences selectable via control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Hsdpfx Aox Twc Aea Nong - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories Machine feet Surcharge for rapid traverse positioning per piece, for fast positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts Set of machine feet for working height 500 mm per piece Location: Garbsen

Kondisi: bekas, nomor mesin/kendaraan: YV2A4BAD4XA29xxxx, jarak tempuh: 1.244.000 km, Tahun pembuatan: 1999, Please contact ATS Norway for further information. Please quote reference number on inquiry: 21144 Specifications – Volvo FH16 (1999): Year of manufacture: 1999 Mileage: approx. 1,263,000 km Technical inspection valid until: 30/11/2026 6x4 Wheelbase: 430 / 138 cm 520 HP Engine brake Suspension: parabolic Manual transmission Tyres (see photos) Equipment and condition: Additional heater for windscreen wipers Front tyres heavily worn Thermostat replaced Instrument error Fuel gauge defective Hnjdpfxjw Ruxzs Aa Nsg Central lubrication Lift axle All belts replaced in workshop Rocker cover replaced by owner Rear structure (platform) renewed by owner 400-litre diesel tank Ready for delivery Briab grain trailer (1983): Year of manufacture: 1983 Technical inspection valid until: 19/06/2026 3 axles Length: 1010 cm Air bellows replaced Tipper ABS fault (according to owner, sensor issue) Ready for delivery Narko timber trailer (1981): Year of manufacture: 1981 Technical inspection valid until: 30/06/2026 Brake band on rear left replaced Sensor defective Ready for delivery Cranab CRX 10 t/m crane (1993): Certified until July this year New...

Kondisi: baru, The Brugger SA38 saw and split machine impresses with a remarkable splitting force of 12 tons, making it the ideal solution for the quick and straightforward processing of logs into high-quality firewood. Effortlessly, logs with a diameter of up to 38 cm can be transformed into firewood. The SA38 stands out for its simple yet well-engineered design, which not only ensures high reliability but also makes maintenance and repairs easier. Technical Specifications • Up to 38 cm log diameter • Splitting force of 12 tons • 50 cm Oregon bar • Log length: 20 – 50 cm • Optional log lifter or chain conveyor available • Weight: 450 kg Depending on your specific requirements, various drive options are available, including a powerful 14 HP Kohler petrol engine, a 7.5 kW 400V electric motor, or a PTO drive with three-point linkage. Prices Hsdpfx Aajpz I I Hs Njng Brugger SA38 Base – €5,499 Feed conveyor 100 cm – €590 Discharge conveyor 350 cm – €895 6-way splitting wedge – €199 Additional PTO drive (for electric or petrol versions): €949 Chain conveyor – €1,898 Log lifter – €1,498

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 5 Hnodpfx Aaox Tka Us Neg BIESSE ROVER C9.5 5-sumbu ini diproduksi pada tahun 2010. Mesin ini memiliki area kerja yang luas (X=4600 mm, Y=1935 mm, Z=275 mm), 25 spindle vertikal dan 6 spindle horizontal, serta spindle elektrik 5-sumbu (11 kW HSK F63). Kecepatan gerakannya tinggi (X/Y: 100 m/menit, Z: 30 m/menit) dengan total daya terpasang sebesar 35,7 kW. Jika Anda mencari kemampuan pengolahan kayu berkualitas tinggi, pertimbangkan mesin BIESSE ROVER C9.5 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pengolahan Kayu CNC

Kondisi: bekas, Tahun pembuatan: 1995, de-1 Hnsdpfxex Tu Szj Aa Nog

Kondisi: bekas, Tahun pembuatan: 1994, Tekanan 600 t Langkah 100 mm Jumlah langkah 45 /menit Jarak antar tiang 580 mm Tinggi pemasangan 460 mm Luas meja 550 x 620 mm Luas pelat tekan 550 x 430 mm Penyesuaian pelat tekan 50 mm Daya penggerak 15,0 kW Hsdow U Ekpepfx Aa Nong Berat 13,5 t Ruang yang dibutuhkan (PxlxT) 1,5 x 2,45 x 2,75 m Jarak gaya nominal 1,7 mm Energi nominal 10,2 kJ dengan penggerak engkol, rem roda gila, kopling hidrolik, penyeimbangan rangka, kontrol dengan pengawasan mandiri

Kondisi: bekas, Tahun pembuatan: 1995, Mesin konstan - Stasiun kombinasi, sikat debu - perangkat pengukur ketebalan - sepatu amplas elektronik individual MCS sistem Weber 32 mm - rol kalibrasi baja beralur - peniup sabuk - karpet vakum. Lebar pengamplasan: 1100 mm. Daya penggerak: 15 kW. Daya feeding sekitar 1,1 kW. Pengaturan ketinggian 0,25 kW. Dimensi sabuk amplas: 1150 x 2500 mm. Ketebalan benda kerja maksimal: 150 mm. Lebar mesin: 1700 mm. Panjang mesin: 2000 mm. Tinggi mesin: 2160 + 150 mm. Berat mesin: 1900 kg. Tinggi kerja konstan: 850 mm. Diameter port ekstraksi: Sabuk 180 mm / Sikat 120 mm. Volume udara ekstraksi: 0,74 m³/s. Daya terpasang: 23 kW. Tekanan udara terpasang: 7 bar. Kecepatan feeding: 3–15 m/menit. Jam operasi: 7000 jam. Lokasi penyimpanan: Nattheim. Hodpfsx Twcpsx Aa Neng

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Nomor katalog 7442 DATA TEKNIS - lebar inlet: 410 mm - tinggi inlet: 120 mm - lebar poros: 430 mm - diameter poros: 400 mm - jumlah pisau: 2 buah - ukuran saringan: 60x60 mm - poros penarik atas, bergigi - dua poros penarik bawah, bergigi - panjang belt pengumpan: 4100 mm - lebar belt pengumpan: 400 mm Hnodox S Nfyopfx Aa Neg - autorevers - motor utama: 30 kW - motor feeding: 2×1,5 kW - dimensi mesin (p/l/t): 2300x1550x1500 mm - dimensi feeder (p/l/t): 4400x500x1000 mm - berat: 2.135 kg KEUNGGULAN – Produksi Polandia – Autorevers (dengan pengaturan) – Dengan konveyor sabuk – Dokumentasi DTR – mesin chipper bekas, kondisi sangat baik Harga netto: 76.900 PLN Harga netto: 18.300 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah seiring dengan fluktuasi nilai tukar yang signifikan)

Kondisi: baru, High-Performance Firewood Processor with 20-Ton Splitting Force – Brugger SA48 Pro! The Brugger SA48 Pro firewood processor is the ideal solution for quick and effortless processing of logs up to 48 cm in diameter into high-quality firewood. This machine stands out thanks to its well-engineered yet straightforward construction, which not only requires minimal maintenance but also simplifies repairs. This impressive machine can be supplied with a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor, or PTO drive for three-point linkage operation. The SA48 Pro dispenses with electronic controls and is operated purely mechanically, using components such as hydraulic valves with levers. Specifications: - Maximum cut length: 55 cm - Maximum log diameter: 48 cm - Splitting force: 20 tons - 55 cm bar - Extra-wide 3.2 m conveyor belt - Hydraulic feed up to the chainsaw - Swiveling conveyor - Automatic chain lubrication Despite its high splitting force and large diameter capacity, the firewood processor remains relatively compact. Equipped with a drawbar, it can be attached to any tow hitch and thus transported with ease. Additionally, two people can easily move the processor by hand on a flat surface without always needing a vehicle. Log length can be continuously adjusted up to 55 cm. The splitting wedge can be moved up or down to different positions using a hand lever, allowing you to split into 2, 4, or even 6 pieces depending on the wood thickness. Optionally available accessories such as the log lifter or chain conveyor make work even easier. Hnsdpfx Aajlu Dc Nj Neg Multiple logs can be loaded onto the chain conveyor using a forklift, crane, or front loader, eliminating the need to lift individual logs manually. The SA27 Pro has been replaced by this improved model, the SA48 Pro. Pricing: Brugger SA48 Pro Firewood Processor: €9,749 6-way splitting blade: €199 8-way splitting blade: €299 Additional PTO drive (for electric or petrol models): €949 Log lifter: €1,498 Chain conveyor: €1,898

Kondisi: bekas, nomor mesin/kendaraan: YS901VFL4MSR1xxxx, Tahun pembuatan: 2009, 20454 Hnodpswi Rb Djfx Aa Neg

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 1000 t Clearance between uprights: 1260 mm Stroke: 315 mm Stroke rate: 10, 21 - 42 /min Distance table/ram, large stroke at top, adjustment at top: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Lateral clearance between uprights: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Transfer feed length: 0 - 250 mm Programmable slide travel per guide: 0 - 140 mm Transfer device stroke rate: 42 /min Drive power: 135.0 kW Weight: 120.0 t Space requirements (W x D x H): 5.9 x 4.8 x 7.95 m Height above floor: 6.95 m Height below floor: 1.0 m Hnodpfxevuukus Aa Njg with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking, tool clamping system for table and ram, motorized central lubrication, oil impulse lubrication, grease lubrication Press control: Siemens S5 - CNC 2-axis transfer (manufacturer Dreher, type STV-D model 350/100-SO, year 2008), control Siemens S7 - Cleaning system (manufacturer Beyss, year 1989) as is and lies, WITHOUT commissioning, disassembled and stored The press was installed in a soundproof cabin by the previous owner, which is not included in the scope of delivery Video of the machine prior to disassembly available

Kondisi: sangat baik (bekas), Nomor katalog 7411 DATA TEKNIS - lebar inlet: 400 mm - tinggi inlet: 180 mm - lebar poros: 430 mm - diameter poros: 430 mm - panjang pisau: 430 mm - jumlah pisau: 2 buah - ukuran saringan: 60x60 mm - 2 poros penarik bergerigi di bawah - motor poros bawah: 1,5 kW - poros penarik bergerigi di atas - motor poros atas: 1,5 kW - konveyor sabuk - panjang sabuk pengumpan: 2250 mm - lebar sabuk pengumpan: 400 mm - motor utama: 30 kW - autoreverse - dimensi keseluruhan (p/l/t): 4300x1630x1000 mm - berat: 1800 kg Hedpfxex S Nfte Aa Nsng – produksi Jerman – autoreverse (dapat diatur) – mesin cacah bekas, kondisi sangat baik Harga netto: 69.900 PLN Harga netto: 16.640 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah seiring fluktuasi kurs yang lebih tinggi)

Kondisi: baru, High-performance firewood processor with 20 tons splitting force - Brugger SA48 Pro! The Brugger SA48 Pro firewood processor is the ideal solution for quickly and effortlessly processing logs up to 48 cm in diameter into high-quality firewood. This processor stands out due to its well-thought-out yet simple construction, requiring minimal maintenance and making repairs straightforward. This impressive machine can be equipped with your choice of a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor, or PTO drive for three-point attachment. The SA48 Pro operates entirely mechanically, without electronic controls, using components such as hydraulic valves with levers. Specifications: - Maximum cutting length: 55 cm - Maximum log diameter: 48 cm - Splitting force: 20 tons - 55 cm bar - Extra-wide 3.2 m conveyor belt - Hydraulic log feed up to the chainsaw - Swivelling conveyor belt - Automatic chain lubrication Despite its high splitting force and large diameter capacity, the processor remains relatively compact. Fitted with a drawbar, it can be attached to any towing hitch for easy transportation. Hnedopz I Ncepfx Aa Nsg Additionally, two people can easily move the machine by hand on level ground, without always needing a vehicle. The length of the firewood pieces can be continuously adjusted up to 55 cm. The splitting wedge can be moved up or down to various positions using a hand lever, allowing you to split into 2, 4, or even 6 pieces depending on the thickness of the wood. Optional accessories such as log lifter or chain conveyor make the work even easier. Several logs can be loaded onto the chain conveyor with the help of a forklift, crane, or front loader, eliminating the need to lift individual logs manually. The SA27 Pro has been replaced by the improved SA48 Pro. Pricing: Brugger SA48 Pro Firewood Processor: €9,749 6-way splitting knife: €199 8-way splitting knife: €299 Additional PTO drive (for electric or petrol version): €949 Log lifter: €1,498 Chain conveyor: €1,898

Kondisi: bekas, nomor mesin/kendaraan: YT9T201621200xxxx, Tahun pembuatan: 2016, 21532 Hsdjxm Tbxjpfx Aa Njng

Kondisi: bekas, Tahun pembuatan: 1991, Pressure: 500 t Upright spacing: 3,200 mm Stroke: 1,250 mm Distance table/ram, max. stroke up, adjustment up: 1,810 mm Table size: 3,000 x 1,900 mm Cushion pressure in ram: 150 t Cushion stroke in ram: 200 mm Cushion area in ram: 2,400 x 1,200 mm Ram area: 3,160 x 1,900 mm Downstroke speed: from 400 mm/s Return stroke speed: 250 mm/s Working speed: 18 - 58 mm/s Height above floor: 6.5 m Drive power: 90.0 + 36.5 kW Weight: 110 t Hnjdpsvuk Txefx Aa Nsg Approved for manual loading operations according to German accident prevention regulations (UVV) Features: - Oil-hydraulic drive - Hydraulic cushion in ram - Ram lock Year of construction: 1976 – Modernized: 1991 Condition: As is, not commissioned, partially disassembled and stored

Kondisi: sangat baik (bekas), Tahun pembuatan: 1974, Nomor katalog 7685 Hnjdpfx Aajx S Nbuj Nsg DATA TEKNIS - lebar inlet: 440 mm - tinggi inlet: 300 mm - lebar poros: 480 mm - diameter poros: 440 mm - jumlah pisau: 2 buah - ukuran saringan: 50x50 mm - poros penggerak bergerigi dari atas dan bawah - motor poros: 0,78/1,1 kW - autoreverse elektrik (dapat diatur) - dengan konveyor sabuk - panjang sabuk pengumpan: 4006 mm - lebar sabuk pengumpan: 380 mm - gerak sabuk maju/mundur - motor utama: 30 kW - dimensi (P/L/T): 6100x1100x1100 mm - berat sekitar 2000 kg KEUNGGULAN – buatan Jerman – dengan pengumpan sabuk – autoreverse – mesin pencacah bekas, kondisi sangat baik Harga netto: 76.900 PLN Harga netto: 18.300 EUR, sesuai kurs 4,2 EUR (Harga dapat berubah mengikuti fluktuasi kurs yang lebih tinggi)

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force: 315 t Distance between uprights: 1350 mm Hsdpjvuk Rqsfx Aa Nong Stroke: 600 mm Distance table/ram, max. stroke up, adjustment up: 1000 mm Table surface: 1200 x 1300 mm Table height above floor: 1245 mm Lateral upright clearance: 1250 mm Ram surface: 1200 x 1300 mm Advance speed: from 750 mm/s Return speed: 680 mm/s Working speed: 180 mm/s Oil capacity: 2000 l Drive power: 150.0 kW Weight: 35.0 t Space requirement (W x D x H): 3.3 x 3.3 x 5.5 m Height above floor: 5.5 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic punching damping with motorized stroke limitation, hydraulic ram lock As is, ex location, NOT commissioned

Kondisi: sangat baik (bekas), 7649 Hjdpfx Aasx S Nawj Nsng

Kondisi: bekas, Tahun pembuatan: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table size: 1200 x 815 mm Table height above floor: 800 mm Ram size: 1100 x 700 mm Speed downward: from 48 mm/s Speed upward: 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Weight: 23.0 t Space requirement approx.: 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading according to CE standard Hsdpfx Aovzxphea Neng with electro-hydraulic drive, pressure/time and stroke-dependent control, photoelectric safety guard at the front (Sick), two-hand operation

Kondisi: sangat baik (bekas), NOMOR KATALOG 7613 Data teknis: - lebar inlet: 650 mm - tinggi inlet: 300 mm - lebar poros: 660 mm - panjang pisau: 660 mm - jumlah pisau: 2 buah - ukuran saringan: 90x100 mm - 2 poros penarik bergerigi dari bawah - motor poros bawah: 3 kW - 2 poros penarik bergerigi dari atas - motor poros atas: 3 kW - konveyor sabuk - panjang sabuk konveyor: 2700 mm Hodox S I Umjpfx Aa Neng - lebar sabuk konveyor: 630 mm - motor utama: 75 kW - fitur autoreverse - mode mundur - dimensi total (P/L/T): 5350x1300x1300 mm - berat: 4200 kg KEUNGGULAN – produksi Italia – autoreverse (dapat diatur) – mode mundur – mesin pencacah bekas, kondisi sangat baik Harga netto: 149.900 PLN Harga netto: 35.690 EUR sesuai kurs 4,2 EUR (Harga dapat berubah tergantung fluktuasi besar)

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force 400 t Upright distance 1,100 mm Stroke 250 mm Stroke rate 25 – 75 /min Distance table/ram, max. stroke up, adj. up 900 mm Table area 1,100 x 965 mm Ejector force in table 30 t Ejector stroke in table 80 mm Ejector force in ram 3 t Ejector stroke in ram 60 / 70 mm Ram area 980 x 800 mm Lateral frame passage 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (W x D x H) 3.5 x 3.3 x 6.0 m Control cabinet weight 1.4 t Control cabinet space requirement (W x D x H) 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with toggle drive featuring steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorised ram adjustment, pneumatic compensating cylinder in the press frame, cam-controlled ejector in the table (30 t / 80 mm), pneumatic ejector in the ram (3 t, 60 mm), motorised central lubrication Hodsvuuknspfx Aa Neng Can be offered either without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1996, Pressure 250 t Frame gap 2100 mm Stroke 300 mm Distance table/ram, stroke at top 850 mm Table surface 2000 x 1300 mm Table height above floor 900 mm Lateral frame passage 1300 mm Ram surface 2000 x 1300 mm Oil capacity 1300 l Drive power 60.0 kW Weight 39.5 t Space requirement (W x D x H) 3.4 x 3.4 x 4.6 m Approved for manual loading operations according to CE standards with oil-hydraulic drive, hydraulic cutting shock absorption, hydraulic ram locking no foundation pit required Available without commissioning or alternatively with new Siemens S7-1500 F control system Hedpfxsvuuido Aa Nsng

Kondisi: bekas, Tahun pembuatan: 1987, druck-300t-de Hnodpfx Aasvuk Ivs Nog