Beli Kempak 200 Tig bekas (18.022)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 230 V, panjang kabel grounding: 4.000 mm, jenis pendinginan: udara, panjang paket selang: 3.000 mm, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 200 A, Pusat Las MIG/TIG 200 ACDC yang belum pernah digunakan Proses MIG dan WIG AC/DC sinergis untuk baja, baja tahan karat, dan aluminium. Ideal untuk digunakan di rumah, di lokasi proyek, untuk pekerjaan pengelasan umum, untuk konstruksi ringan dari baja, baja tahan karat, dan aluminium, serta di bengkel. * 5-200 AMP * 230 Volt * Sinergis * ACDC * Pulsa WIG * 2/4 Siklus * Aliran gas sebelum/sesudah * Arus awal/akhir * Kenaikan/penurunan arus * Waktu pulsa/frekuensi pulsa * Keseimbangan AC/frekuensi AC * Gelombang AC * Pengelasan titik * Program tetap/penyimpanan program * Opsi elektroda Termasuk: * Obor las SB150, 3 meter * Obor las WIG SR17 * Kabel massa, 3 meter, 35mm² * Kabel elektroda * Selang gas * Manual pengoperasian Dkelozqc U Aehccqrer * Kemasan asli * Garansi 3 bulan dari Cjays Mesin ini belum pernah digunakan dan berasal dari stok gudang. Tidak ada garansi pabrik dari Lascentrum. Pengujian pengelasan dapat dilakukan di bengkel kami di Valkenswaard. Kunjungan hanya dengan perjanjian terlebih dahulu. Pengujian pengelasan dapat dilakukan. Video mesin saat digunakan untuk pengelasan dapat disediakan. Kami juga mengirimkan ke negara-negara seperti Spanyol, Jerman, Austria, Lithuania, Yunani, dan semua negara lain di dalam dan di luar Eropa dengan menggunakan palet Eropa per pengiriman. Semua mesin kami telah dirawat dan siap digunakan 100%, kecuali dinyatakan lain. Gambar di atas menunjukkan mesin yang sebenarnya. Kami juga dapat menawarkan jenis mesin lain, seperti: Bekas, Baru, Mig, Mag, CO2, Tig, Pulsa, AC/DC, Plasma, Berpendingin air, Elektroda. Kami menawarkan merek-merek berikut: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Anda selalu berurusan langsung dengan Cjays Lastechniek dan tidak dengan pihak ketiga.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: belum diuji, jenis arus masuk: AC (pendingin udara), tegangan masuk: 230 V, panjang kabel grounding: 3.000 mm, berat keseluruhan: 11 kg, masa garansi: 3 bulan, jenis pendinginan: udara, panjang paket selang: 4.000 mm, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 200 A, Cjays Tig 200E ACDC – Mesin Las WIG Puls ACDC dengan Pendingin Gas Mesin pameran, siap digunakan langsung. Garansi 3 bulan. Spesifikasi: 5-200 AMP Delszmnqzjhccqrokr 230 Volt 2/4 Siklus Puls / Frekuensi Puls Aliran gas sebelum pengelasan / Aliran gas setelah pengelasan Arus awal / Arus akhir Kenaikan arus / Penurunan arus Keseimbangan AC Opsi elektroda Termasuk: Obor las SR17 sepanjang 4 meter, kabel massa dengan klem, dan saluran gas. Kunjungan hanya berdasarkan perjanjian. Pengujian pengelasan dapat dilakukan. Video mesin dalam kondisi pengelasan dapat disediakan. Kami juga mengirimkan ke negara-negara seperti Spanyol, Jerman, Austria, Lituania, Yunani, dan semua negara lain di dalam dan di luar Eropa dengan menggunakan palet Eropa per pengiriman. Semua mesin kami telah dirawat dan 100% siap digunakan, kecuali jika dinyatakan lain. Gambar di atas menunjukkan mesin yang sebenarnya. Kami juga dapat menawarkan jenis mesin lain, seperti: Bekas, Baru, Mig, Mag, Co2, Tig, Puls, AC/DC, Plasma, Pendingin air, Elektroda. Kami menawarkan merek-merek berikut: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Anda selalu berbisnis langsung dengan Cjays Lastechniek dan tidak pernah dengan pihak ketiga.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, panjang kabel grounding: 3.000 mm, masa garansi: 3 bulan, jenis pendinginan: udara, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 stroke Pulse Pre-gas / Post-gas Current rise / Current downslope Start current / End current Electrode option Suitable for welding steel and stainless steel Test welding possible Includes 4-meter SR17 welding torch, earth cable, gas hose, spare parts, and 3 months warranty. Test welding is possible. A video of the machine in welding operation can be provided. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries inside and outside Europe via Euro pallet transport. All our machines have been serviced and are 100% ready for operation, unless otherwise stated. The images above show the actual machine. We can also offer you other machine types such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Dslhjy Rqh Toccqrskr You always do business with Cjays Lastechniek directly and never with third parties.

Kondisi: baik (bekas), Kapasitas pengelasan: 10 - 200 A Berat: 103 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Delhccjyrglcjqrokr DE - 44143 Dortmund - Wambel / Jerman

Kondisi: bekas, TIG welding machine L-TEC Type Inverter TIG 200 DC TIG welding unit for direct current (DC) Serial No.: 184548 Year of manufacture: approx. 1994 Output: 200 Amp = 60% duty cycle 155 Amp = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 A plug - 4 meter hose package with central connection and hand torch - with remote potentiometer (foot pedal) - gas pressure regulator - DC only - HF ignition Space requirements (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Otherwise in good condition. Delhccodzqb Eeqrekr

Kondisi: siap digunakan (bekas), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideally suited for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With a height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly structured and easily accessible storage spaces on both sides. Thanks to 6 storage levels per side, including the base, it offers ample storage space while requiring minimal footprint. Each cantilever arm can support up to 200 kg. Its robust construction ensures reliable performance in everyday operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED IN THE PRICE. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Overall height: approx. 2,000 mm - Usable arm depth: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Bay width (upright spacing): approx. 1,250 mm - Load capacity per arm: max. 200 kg (with even load distribution) - Load capacity per upright: max. 1,000 kg (with even load distribution) - Storage levels per side: base + 5 - Specification: double-sided, arms & anti-roll-off stops solidly welded - Colour finish: RAL 7016 (anthracite grey) - Connectors & bracing: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base sections made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, made of RR 50x30x2 mm - Includes all bracing and required bolts - Includes heavy-duty anchors Price: €1,229.00 net incl. delivery. €1,462.51 gross incl. delivery. You will receive an invoice with VAT shown separately. Dkelhcjzrvbfscqrer Delivery included: Nationwide free delivery within Germany, excluding islands. Fast handling and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our phone number on our company page. We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Eurofold 235 mesin lipat 2 kantong. Dalam kondisi baik dan siap tersedia! Dkjlhccezgf D Sjqrer Semua peralatan yang disebutkan tidak untuk dijual/dijual kembali ke Rusia atau ke negara mana pun yang berada di bawah embargo Uni Eropa.

Kondisi: baik (bekas), Vierbackenfutter_200_Roehm Dolhccqstxklyorekr

Kondisi: baik (bekas), planscheibe_200 Dslhcsxuflfocqrjkr

Kondisi: baru, Current 200 A Duty cycle at 100% 150 A Dkslhcewrzrxocqrer Mains voltage 230 V Machine weight approx. 9.0 t Space requirement approx. 0.46 x 0.15 x 0.32 m TIG welding machine - new - 3 m hose package - additional 8 m hose package - ground cable - gas connection hose - documentation

Kondisi: sangat baik (bekas), The portable Weldkar TIG 2025 230 V AC/DC pulse welder offers a welding current range from 10 to 200 A and is equipped with all essential features expected from a professional TIG welding machine. The welder features HF ignition, adjustable upslope and downslope, 2–4 stroke operation, gas pre-flow and post-flow control, and pulse frequency adjustment. In addition to a comprehensive range of settings for TIG (pulse) welding, this device also includes an MMA function (for stick electrode welding). With its high power output, the welder is suitable for welding aluminium, stainless steel, and steel up to 5 mm thick. Moreover, the Weldkar TIG 2025 AC/DC Pulse has an adjustable current frequency, which improves arc stability and provides better control over the weld pool. Despite its numerous functions and options, the control panel remains straightforward and well-organized. THE WELDERS ARE NEW, EX-DEMO, DISPLAY UNITS. Dolhcsd Nzlxecqrokr

Kondisi: hampir baru (bekas), 🧰 Fitur Produk Dslhcewaa Nfecqrekr Produsen: UTZ Kondisi: seperti baru Material: Polipropilen (PP) berkualitas tinggi Warna: hitam Dimensi luar: 350 × 210 × 145 mm Dimensi dalam: 305 × 180 × 134 mm Volume: 7 liter Berat: 0,66 kg Fitur khusus: Standar Eropa, dapat ditumpuk, konduktif ESD 💰 Harga € 5,- (nett, belum termasuk PPN) Diskon kuantitas: berdasarkan permintaan Biaya pengiriman: seluruh Eropa, berdasarkan permintaan Waktu pengiriman: segera tersedia Inspeksi dan pengambilan: kapan saja, berdasarkan perjanjian Selalu lebih dari 5000 meter linear rak palet dari berbagai produsen tersedia di gudang (Perubahan dan kesalahan dalam data teknis, spesifikasi, dan harga serta penjualan antara waktu dapat terjadi! Lihat Ketentuan & Persyaratan Umum kami, semua harga belum termasuk PPN, diambil dari gudang.) Lenox Trading – Penyedia terkemuka untuk teknologi pergudangan & rak beban berat bekas & baru Teks deskripsi: Apakah Anda mencari rak gudang berkualitas tinggi untuk dibeli? Dengan sekitar 100 karyawan, Lenox Trading adalah salah satu pedagang terbesar untuk teknologi pergudangan baru dan bekas di seluruh wilayah DACH (Austria, Jerman, Swiss). ⚡ TERSEDIA SEGERA: • Lebih dari 10.000 meter linear rak segera tersedia • 20.000 m² platform gudang & platform konstruksi baja segera tersedia • 30–50 truk trailer barang bongkar muat setiap minggu untuk pilihan maksimal 📦 RANGKAIAN PRODUK KAMI (BELI SECARA ONLINE DENGAN HARGA TERBAIK): Baik itu rak palet, rak beban berat, rak tinggi, rak dengan rak, rak ban, atau rak untuk kontainer IBC – kami menyediakan dan memasang di seluruh Eropa dengan tim KAMI SENDIRI! Termasuk perencanaan CAD, transportasi, pembongkaran, dan pemasangan. 🏭 MEREK TERBAIK BEKAS & DARI LIKUIDASI / PENJUALAN PAKSA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tipe MPB, Tipe E, Rak beban berat Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Rak lengan cantilever (Rak lengan cantilever Elvedi, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 BISNIS KAMI YANG LAIN: LELANG ONLINE & LIKUIDASI Untuk pembongkaran dan pembersihan, kami menawarkan paket lengkap yang komprehensif: 1. Pembelian paketan: Pembelian barang dagangan, perlengkapan & seluruh stok gudang termasuk pembersihan menyeluruh. 2. Lelang komisi: Melakukan lelang atas nama klien. Layanan lengkap kami oleh karyawan kami sendiri: Katalogisasi, penyiapan kantor, inspeksi, pengeluaran barang, logistik, pembongkaran, dan penyerahan bersih. Baik Anda menemukan kami melalui rak beban berat atau mencari rak beban berat galvanis / sistem rak beban berat – kami menjamin kondisi terbaik. Hubungi kami untuk mendapatkan penawaran tanpa kewajiban!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Dkolhomhhypeccqror

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: Dslhccqjmidyferekr - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: bekas, nomor mesin/kendaraan: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor knives: 66 Dslheyr Tttjccqrjkr Stator knives: 1 row Infeed opening approx. 1100 x 1200 mm Drive motor: 55 kW

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 309 h, High lift pallet truck Dkjlhccovi Tf Heqrer Mast type: None

Kondisi: bekas, Press rak mesin Tiger 1000x2200 19/26 Dkslhccqozkh H Rorsr

Tahun pembuatan: 2004, Kondisi: baik (bekas), Mesin cetak injeksi hingga 5.000 KN Jenis mesin: Krauss Maffei KM 2300-12000 MC Tahun pembuatan: 2004 Dkolhccqozi Sfzsrsr Sistem kontrol: CNC MC4 Jam operasional: 93.900 jam DATA TEKNIS Unit Penutup Gaya penutup: 23.000 kN Gaya pembukaan cetakan, maks.: 1.420 kN Gaya penggerak pelat bergerak (pembukaan): 227 kN Gaya penggerak pelat bergerak (penutupan): 203 kN Luas permukaan penempatan cetakan (T x L): 2.830 mm x 2.400 mm Jarak tiang (T x L): 2.000 mm x 1.600 mm Langkah pembukaan cetakan: 2.600 mm Tinggi cetakan minimum: 1.100 mm Tinggi cetakan maksimum: 1.800 mm Jarak cetakan maksimum: 3.700 mm Langkah pengeluaran hidrolik: 350 mm Gaya pengeluaran maju/mundur: 415/115 kN Diameter sekrup: 135 mm Rasio L/D: 23 Tekanan injeksi: 1.389 bar Volume langkah: 8.588 cm³ Berat tembakan (PS): 7815 g Kinerja injeksi: 1.019 cm³/s Kecepatan putar sekrup: 113 RPM Kinerja plastifikasi maksimum: 191 g/s Tekanan nosel: 241 kN Peralatan elektrik dan hidrolik Daya terukur motor pompa: 132 kW Daya pemanas terpasang: 997 kW Zona pemanas silinder yang dapat diatur: 7 Jumlah siklus pengeringan: 350 1/jam Kapasitas tangki: 2500 l Dimensi dan Berat Dimensi mesin: 15,15 m x 4,15 m x 3,29 m Berat total mesin: 143.000 kg Berat cetakan maksimum: 62.000 kg Robot LRX 1000 Sumbu X: 2.000 mm Sumbu Y: 3.000 mm Sumbu Z: 5.000 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, kapasitas angkut: 12.000 kg, tinggi konstruksi: 2.650 mm, berat kosong: 2.000 kg, panjang total: 3.100 mm, lebar konstruksi: 1.750 mm, Crane arm ISO class: Terminal West Dslhccou Dzv Teqrekr Condition: Ready for operation and fully functional Technical condition: Very good

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, kapasitas angkut: 7.000 kg, berat kosong: 613 kg, lebar konstruksi: 2.200 mm, Perangkat pengatur garpu Titik beban: 600 Kelas ISO: ISO kelas 4 = 5.000 - 10.000 kg Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: sangat baik Deskripsi: Side shifter; perangkat pengatur garpu dengan lebar bukaan 540 / 2080 mm Side shifter; perangkat pengatur garpu dengan lebar bukaan 540 / 2080 mm Dkslhsu Dzx Usccqrjr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Dkelhcsmhh Dhecqrsr Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: Dkjljmhhx Ishccqror - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Dkelhccqjmhh Anerjr Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. Dolhccqjh Ek Dasrekr According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth Dkelhccomhhf Ssqrsr - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.