Beli Keseimbangan Berat bekas (8.343)

Kondisi: bekas, Counterweight, wheel weights, balancing weights - 25 g - 30 g - 40 g - 50 g - 60 g Gedpfx Ahjb A Tbyeusbk - 100 g - 200 g - Complete lot sale - Total weight: 24 kg

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, kapasitas muatan per bagian penyimpanan: 900 kg, panjang total: 1.450 mm, tinggi total: 2.300 mm, lebar total: 600 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Penawaran mengikat untuk pengambilan tepat waktu antara 04.05.26 hingga 07.05.26. DETAIL TEKNIS Beban bidang pada tinggi rak 650 mm: 6000 kg Beban rak: 900 kg DETAIL MESIN Godpjyr Nuyjfx Ahuebk Dimensi & Berat Dimensi (P x L x T): 1.450 x 600 x 2.300 mm Berat: 150 kg Catatan: Rak dijual tanpa isi seperti yang terlihat pada gambar. Referensi eksternal: Lot 77

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: WG002553, Merek/model: MCWEL M630 (Miller) Output DC terukur: 26,4 kW Arus terukur: 550A Tegangan: 20 – 45V Rentang arus: 55 – 550A Duty cycle terukur: 60% Elektroda yang digunakan: 1,6 – 8,0 mm Model mesin: F3L912 Output mesin: 28 kW / 1800 rpm, 60 Hz Sistem pendingin: pendingin udara, kondisi lingkungan Gbedpovznbyjfx Ahujk Dimensi: P – 1.525 mm x L – 760 mm x T – 1.050 mm Bobot: 900 kg

Tahun pembuatan: 2025, jam operasional: 10 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Saya ingin menjual mesin pembuat piring kertas yang menghasilkan piring berkualitas bagus berukuran 4 inci. Gbjdpeyy U R Rjfx Ahuok

Kondisi: baru, Tahun pembuatan: 2025, de-EN_MODEL: HF500 6” (12”) NAME: HOCHLEISTUNGS-SCHLAUCHPRESSMASCHINE Presskraft: 500 Tonnen MAX. PRESSBEREICH: 310 mm ÖFFNUNGSWEG: +115 mm ÖFFNUNG OHNE BACKEN: 360 mm 90°-BÖGEN: 3” SCHLIESSGESCHWINDIGKEIT: 18 mm/s PRESSGESCHWINDIGKEIT: 1,4 mm/s Gedpfx Aowbtaajhuobk ÖFFNUNGSGESCHWINDIGKEIT: 20 mm/s GERÄUSCHPEGEL: 62 dBA ANTRIEB: 5,5 kW, 3 VAC SIEMENS TOUCHSCREEN-STEUERUNG PROPORTIONALE DRUCKREGELUNG POSITIONSKONTROLLE PREIS: 64.000 € DAP SOFORT AB LAGER LIEFERBAR

Kondisi: baik (bekas), Tahun pembuatan: 2016, 134 unit, pelindung samping / pelindung rangka / pelindung tabrakan / pembatas untuk rak palet, baris tunggal dan ganda, Nedcon – bekas –: Harga ex lokasi: 95,- € / unit (netto), dibongkar, dikemas, dan dimuat! Pabrikan: Nedcon Tipe: Set pelindung samping sigma 135° Gjdpfx Ahjy Aixuoujbk Tahun produksi: 2016 / 2019 Tipe 1 (untuk baris tunggal): 6 unit tersedia Pelindung samping sigma 135°, L=1100mm Set pelindung samping sigma 135°, L=1100 Panjang: 120cm Tinggi: 40cm Kedalaman: sekitar 22cm Berat: sekitar 31kg Harga baru sekitar 205,- € (netto) / unit Tipe 2 (untuk baris ganda): 124 unit tersedia Pelindung samping sigma 135°, L=2400mm Set pelindung samping sigma 135°, L=2400 Panjang: 243cm Tinggi: 40cm Kedalaman: sekitar 22cm Berat: sekitar 41kg Harga baru sekitar 227,- € (netto) / unit Kondisi: baik – sangat baik Tersedia: segera Lokasi: Augsburg

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, masih tersedia 3 unit Model: JV 206-700 telah diperiksa di bengkel dan dicat ulang 2,80 kW Gsdpfx Ahexz E Dhsujbk 50 Hz 400 V 960 rpm

Kondisi: hampir baru (bekas), PUMA 4100MB CNC LATHE (DENGAN TOOL HIDUP) Diameter pembubutan maks.: Ø560 mm Panjang pembubutan maks.: 978 mm Kapasitas bar: Ø116 mm Diameter chuck: 15” (380 mm) Sumbu X: 352 mm Sumbu Z: 1105 mm Kecepatan rapat (X/Z): 16 / 20 m/menit Putaran spindle: 2000 rpm Daya motor: 30 – 37 kW Torsi: 1600 – 2400 Nm Lubang tembus: Ø117 mm Turret: 12 stasiun Gsdjy Aikwepfx Ahujbk Tipe alat: BMT-75 Putaran tool hidup: 4000 rpm Daya tool hidup: ~23 kW ✔ 4 tool hidup aktif terpakai

Kondisi: baik (bekas), plattformwagen2024 Gbjdpoygtbaefx Ahusk

Kondisi: baik (bekas), 1 Gbedpfxeyzd R Nj Ahusk

Kondisi: bekas, 1 Gsdpfoh Izr Usx Ahuobk

Kondisi: baik (bekas), Rahmen: 2750*1100 mm Gsdpfxjd Duc To Ahuobk Traversen: 1800*80 mm 2800 kg/Fach 2700*100/120 mm 2400-3000 kg/Fach Benötigen Sie Regale oder Zubehör in anderen Zusammenstellungen oder Ausführungen, sprechen Sie uns bitte an. Wir bieten ein umfassendes Programm an neuen und gebrauchten Regalen sowie Zubehör und unterstützen Sie gerne bei Ihrer Planung. Weiteres Zubehör wie zum Beispiel: Rahmen,- Eck,- und Anfahrschutz, Durchschubsicherungen, Spanplatten, Gitterroste, Rückwandgitter, Tiefenstege lieferbar. Versand: Bitte fragen Sie unter Angabe Ihrer PLZ und Ortsangabe, sowie der gewünschten Artikelmenge die Frachtkosten an. Weitere Serviceangebote: Planung, Regalmontage/demontage, Ankauf/Verkauf Aenderungen und Irrtuemer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten!

Kondisi: bekas, Tahun pembuatan: 1998, Workpiece weight: 150 kg Workpiece length: 2,500 mm Diameter: 160 mm and above Balancing speed, adjustable: 100 - 3,000 rpm Journal diameter: 160 - 350 mm Operating voltage: 400 V Total power requirement: 1.5 kW Machine weight approx.: 1.5 t Space requirements approx.: 7.50 x 1.30 x 1.60 m Control cabinet: 0.60 x 0.60 x 1.85 m Measuring and evaluation software: TIRA X9000 Balancing in two planes or individually Gbjdpfxewcg Els Ahusk Static / dynamic unbalance correction possible Operating system: Windows XP Measurement software update: 2007 Serial no.: R 32/98 Max. display sensitivity: 0.5 gmm Belt drive: 100 - 3,000 rpm.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing Gedpfxoh R Taqs Ahujbk (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Godemhhypspfx Ahuobk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. Gedpfx Ahomhh Dhoujbk The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: Gsdpsfdkb Tjfx Ahuebk - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance - Rack length = 4,000 mm Gjdpsmhh Dzofx Ahuobk - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Gsdpfsmhh Anox Ahujbk - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Godpeguk A Hsfx Ahuebk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg Gedpoguk Dksfx Ahusbk - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm Gbodpomhhy Njfx Ahusk - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard Gjdomhh Dtspfx Ahuebk - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. Gbsdoguk Dvjpfx Ahusk When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Segera tersedia dari lokasi: Mesin Penyeimbang Vertikal CNC TIRA Tipe KV 10 Tahun pembuatan: 2007 Massa rotor: 1 – 10 kg Gedpsy Alk Hofx Ahusbk Tinggi rotor hingga 400 mm Diameter rotor hingga 400 mm Kecepatan penyeimbangan maksimum hingga 2.000 rpm Sensitivitas tampilan maks. (gmm): 0,5 Daya penggerak: 2,2 kW Berat: 1.500 kg Dengan harga Euro 3.000,— belum termasuk PPN, dari lokasi