Beli Ketegangan Klem Perakitan bekas (2.661)

Kondisi: baik (bekas), Screw clamps with shaft, pipe clamps, pipe fastenings -Nominal diameter (DN): 10/12 -Nominal diameter (DN): 20/22 Hnjdpeb A Sl Ssfx Agkjn -Nominal diameter (DN): 25/28 -Nominal diameter (DN): 50/55 -Nominal diameter (DN): 65/70 -Nominal diameter (DN): 80/85 -Nominal diameter (DN): 100/102 -Price: complete -Package weight: 11.5 kg

Kondisi: baik (bekas), Strapping machine, packaging machine, strapping tool, carton stapler, stapling pliers, plier stapler, tensioning and sealing tool - Tensioning pliers: sealing tool for strapping band Hnodpfx Aei I Hdgjgkon - Band width: approx. 16 mm - Staples: approx. 19 mm wide, see photo - Dimensions: 480/100/H170 mm - Total weight: 3.6 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 14 kg, masa garansi: 12 bulan, tegangan masuk: 230 V, panjang total: 420 mm, tinggi total: 450 mm, lebar total: 245 mm, laju aliran volumetrik: 420 m³/jam, Perlengkapan: kebisingan rendah, sasis, Smoke extraction unit with remote control and extraction hose Air inlet interface: Flange Max. power: 300W Airflow speed: 24 m/s Filtration efficiency: 0.3 µm / 99.97% Noise level: Hedpfxexrgl Io Agksnn

Tahun pembuatan: 2024, Kondisi: baru, The world’s slimmest timber frame assembly table – only 3 cm! Supplied without wooden boards. Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack clamps - 14 adjustable stop blocks - 14 interchangeable exterior pressure plates - Cordless impact driver - Bit adapter - 50 MMS 10x70/5 dowels - 8x165 mm hammer drill bit Dimensions: Hnsdjb Nrbnjpfx Agkjn Clamping length: 0 to 3,550 mm Hole grid: 140 mm With board width of 1,250 mm = table length 12,350 mm Maximum clamping force: approx. 250 kg Clamp stroke length: 340 mm Stop block height: 100/160 mm This frame assembly aid was developed to allow for precise production of timber frame elements. Special attention was given to space requirements and cost. Thanks to the extremely flat design, by removing the clamps and stops, the area can be repurposed. This is a significant advantage not just for small, but for all company sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick timber board (to be assembled by the customer). Ramps can be fitted at the edges with the same boards. The resulting surface can be driven over with heavy vehicles or used as storage area. Therefore, the space for timber frame assembly can be activated only as needed. All steel parts are electro-galvanized. The entire assembly is performed on site by the customer. After adjusting the table, the stops must be pinned, otherwise they can be shifted by the force of the clamps. Packed in wooden crates, ready for EU shipping. Delivery free domicile within Germany. Made in Germany. For further data, see product brochure.

Tahun pembuatan: 2021, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 320x = 1 palet € 1.900 Merek: NN Tahun produksi: 2021, baru/belum terpakai Dimensi PxLxT (mm): 10.000 panjang (4.000 kg) Hedotzwynspfx Agkenn Jumlah stok: 320

Kondisi: baik (bekas), Tahun pembuatan: 2008, Hydraulically height-adjustable lift truck by Witte - Alufix for loading coordinate measuring machines (CMM) With Hovercraft air bearing plate Lift truck featuring hydraulic height adjustment from approx. 660 to 950 mm. The tabletop is coated and equipped with a roller on the wide side to bridge height differences between the table and the measuring plate. Internal dimensions approx. 900 x 700 mm. Hedsw Nylkepfx Agksnn Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The top surface features a 50 mm hole grid pattern. Each hole has a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the bottom. The air supply can be activated via the valve integrated in the handle, making it easy to move the entire plate with the clamped workpiece. Usable (aluminum) area is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixtures in automotive engineering and similar applications. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated on-site by prior appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this dealer."

Kondisi: hampir baru (bekas), de-DE: Multifunktionales Prüfgerät zur Überprüfung der Sicherheit von Niederspannungsanlagen SEFT950 Carlo Gavazzi SEFT 950, Seriennummer: 002814/21006, Messgerät komplett mit Transporttasche, Kabeln in verschiedenen Größen, Transducer zur Übertragung der gespeicherten Messwerte auf den PC, Zubehör für Messungen in medizinischen Einrichtungen, Erdspieße für Schritt-, Kontakt- oder Erdungsmessungen; geeignet für sämtliche elektrische Messarten, inklusive Bedienungsanleitung. Messfunktionen: Niederohm-Messung = Rpe Isolationsmessung = Riso Erdungs- und Bodenwiderstandsmessung = Re/p Schleifenmessung = LOOP Hsdpfeg Tdxdsx Agksnn FI-Schutzschalterprüfung = RCD Spannungsfallmessung = %ΔU Phasensequenzprüfung = O/V Preis: 800 € zzgl. MwSt. Lieferbedingung: FCA Oradea/Rumänien Weltweite Lieferung/Export möglich. Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim româna.

Kondisi: bekas, nomor mesin/kendaraan: 307264.3, Mesin Penggulung Meteor Compact Tipe 307-01 Diameter gulungan 80 mm x 350 mm Hsdpfx Agsylnb Eekjnn Ketebalan kawat 0,15 - 0,5 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 66N-1507, Micafil Mesin Penggulung OFAnII No. 402 No. 66 N - 1507 Kawat 0,006 - 1,5 mm Rentang penggulungan 80 x 500 mm Ekor tetap tidak ada Hnedsylmhkopfx Agken Micafil Mesin Penggulung OFAnII No. 403 No. 66 N 1504 Kawat 0,006 - 1,5 mm Rentang penggulungan 80 x 500 mm Rentang penggulungan

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Ferwood Code: RU0011480 - Manufacturer Code: - Condition: Used - Functionality: Fully operational - Compatible Machine: CNC WEEKE VENTURE - WEEKE BHC - HOMAG BOF - HOMAG BAZ - HOMAG CENTATEQ - If interested, we offer overhaul/servicing. Please contact us. Hnodpfx Aev I A Rpsgken

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood code: RU0008921 - Manufacturer code: 6714A0729 - Condition: Used - Functionality: Not tested - Compatible machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested, we offer overhaul service; please contact us. Hsdpfsv Hgu Aox Agkjnn

Tahun pembuatan: 2008, Kondisi: baik (bekas), 1 unit Hein Lehmann Liwell tensioning shaft screening machine. Type: KT 1.0-3.0/12 EDS. Dimensions (L x W): 3,000 x 1,000 mm. Machine no.: 2440. Year of manufacture: 2008. Order no.: 87.0055. Equipped with drive, cardan shaft, and springs. Hnsdonykaajpfx Agken

Kondisi: bekas, Length (retracted): 8,800 mm Hodpfx Agsglanzjkonn Length (extended): 27,300 mm Belt width: 800 mm Type: MR3185-800

Kondisi: bekas, Length (retracted): 6,000 mm Length (extended): 18,000 mm Hedpfxeglamvs Agkenn Belt width: 600 mm

Kondisi: baru, Tahun pembuatan: 2026, Assembly Robot BEFARD XGR 800.3 Specification: * Full remote control – for both operation and device management * Three hydraulic extensions with a vertical reach of 5.55 m * Powered by combustion engine (optionally with additional power supply from a 230 V electric motor or Li-ion batteries) * Possibility of simultaneous operation on 230V mains and battery charging (for the Li-ion version) * Dual-circuit vacuum system Hjdpfxeibqr Tj Agkjnn * Maximum lifting capacity: 800 kg * 8 vacuum suction cups * Rotating frame with suction cups (hydraulic) – remote control operation * Side shift of the suction cup frame (right/left by 10 cm – hydraulic) * Tilting frame with lateral suction cups (manual or hydraulic, depending on the machine) * Tilting frame with suction cups (enables lifting from a horizontal to a vertical position hydraulically) * Non-marking tracks * Two operating modes – fast and slow * Choice of colour Additional optional equipment: * HS spacers * Valves * Frame tilting with suction cups (hydraulic – remote control) * Forks * Anti-overload system * Hook * LED lamp * 230 V wired power supply (for combustion engine version) Other available models: XGR800.1 with one hydraulic extension, vertical reach 3.9 m XGR800.2 with two hydraulic extensions, vertical reach 4.75 m Petrol engine – VANGUARD brand, 10 HP / 5.5 kW

Kondisi: sangat baik (bekas), Lebar kerja maksimum 9000 mm Tinggi kerja maksimum 1100 mm Hnodpfx Agexnwpisksn 6 bagian penekan atas, masing-masing 1520 mm 18 penjepit depan Lebar total 13000 mm Tinggi total 2200 mm

Tahun pembuatan: 2003, Kondisi: baik (bekas), Schatz Advanced Schraubanlage Hnedpfx Asihiiiegken

Kondisi: sangat baik (bekas), en: Epson G10-854SR Robot Assembly Station / Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = Heat Sink, SW = Front Wall Bracket) Section 3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards enters the dispensing area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position. - The x-y-z handling system moves the dispensing head to the designated position and starts the dispensing process. - Once dispensing is successfully completed, the handling moves to the home position and the WT is placed back onto the conveyor belt. - The carrier is then conveyed into the assembly area KK+SW (condition: no WT in the pick & place position). Section 3.2: Assembly Area KK+SW - A WT moves from the dispensing area into the KK+SW assembly area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position; at this stage, the side walls of the partially assembled unit's chassis are aligned. - Simultaneously, KK-tray and SW-tray positioning occurs. - A stack of KK-trays (12) and a stack of SW-trays (12) are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety gates are opened and the loaded tray stacks move into the gripping position of each stacker. - The two safety gates are closed again. - The respective grippers pick up the appropriate tray. - Using the Z-axis, trays are separated and transported upwards (above their pick-up height). - For centering and tray stabilization, a centering support is positioned under each tray via x-handling. - The stacker Z-axis then places the respective tray onto the centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the KK is taken from the tray and placed in an intermediate position for alignment (to compensate for inaccuracies when picking up—maintained gripping position for assembly). - The KK is scanned, picked up again, and if the scanner’s result is OK, it is assembled onto the WT. - Defective (n.i.O.) KKs are placed in a defective component box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and assembled onto the WT. - The process continues with the assembly area front. Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability Horizontal: +/- 0.025 mm Repeatability Vertical: J3: +/- 0.01 mm Repeatability Orientation: J4: +/- 0.005° Maximum Operating Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Moment of Inertia: nominal 0.02 kg*m², max. 0.25 kg*m² Hnjdpfx Aeibx S Njgkjn User Cabling Electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cable: 3m Financing via our bank is possible as well. complete-concept.leasingo.de

Kondisi: sangat baik (bekas), Maximum working width: 55 mm Maximum working height: 75 mm Minimum working width: 24 mm Minimum working height: 34 mm Hnodpfxowrcwvs Agkon Length: 14 m Width: 4 m In very good condition.

Tahun pembuatan: 2026, Kondisi: baru, U1254024-01 Trailing Edge Clamp Unit, "neu" (Screen PT-R4xxx & OEM) PlateRite 4xxx, Luxel T6xxx, Acento, Avalon N4, Topsetter 74/P S100096323V02 orig. Tail Clamp 8RE Set, "neu" (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF S100096323V02 orig. Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF Hodjb Uptiopfx Agkonn "überholt" mit orig. Ersatzteilen von Screen Alle anderen Clamp Sets auf Anfrage. Alle Angebote sind freibleibend

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Rated current: 2250A, Rated short-time withstand current: 75kA/125kA, Degree of protection cabinet/floor: IP20/IP00, Protection class: SK1, Cable entry: bottom, Main circuits: 400V/230V AC, Control circuits: 110V DC, Signalling circuits: 110V DC, Number of sections: 7, Section equipment: Section 1: 4x NH00, Section 2: 2x NH1, Section 3: 2x NH2, Section 4: 2x NH3, Sections 5-6: Siemens WLII 2000S + ETU25B, Section 7: Compensation unit Siemens BR6000. Documentation available. On-site inspection possible. Hnedpfx Agsuanrkskjn

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), 1 Hnsdpfx Agjxaph Iskjn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, An assembly line (workpiece carrier assembly system) from item Bayern GmbH for equipping, assembling, and (return) transporting workpiece carriers with two Deprag screwdrivers is available. Assembly principle: Karakuri (non-powered material flow principle), max. load: 30kg, max. stroke: 2630mm, max. speed: 1.63m/s. Assembly station dimensions (X/Y/Z): approx. 12850mm/3350mm/2950mm, weight: approx. 1600kg. Lift system dimensions (X/Y/Z): approx. 9700mm/3350mm/1600mm, weight: approx. 400kg. Control: item C3-05. The system is modular at any time and complies with industrial standards. Documentation is available. On-site inspection is possible. The system has been dismantled. Hedsw Dfhnjpfx Agkenn

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, SUORAAN VALMISTAJALTA – ilman välikäsiä YKSISIIPINEN KÄÄNTÖPÖYTÄ pneumaattisella käyttötekniikalla, 7,5 m pitkä Esittelemme ylpeinä kokoonpanopöytämme esivalmistukseen – yksisiipinen perhosmallinen kääntöpöytä – malli ER-01P/750, jonka pituus on 7,5 metriä. Pöytä on suunniteltu erityisesti seinien, kattojen ja lattioiden tehokkaaseen ja tarkkaan esivalmistukseen. PUUSEPÄN-/RAKENTAJANPÖYTÄ / KOKOONPANOPÖYTÄ ESIVALMISTUKSEEN Hnjdpfxol D Nkze Agkon * Pneumaattinen käyttö – työpaine 7–9 BAR * Sallittu kuormitus: 50 kg/m² (esim. 7,5 m pituudella – 1125 kg) * Pulverimaalattu teräsrakenne * 15 mm vanerilevy * Rei’itykset puristinsylinterien asennusta varten 150 mm välein * Irrotettavat korkeussäädettävät lukituspultit * Modulaarinen rakenne laajennusmahdollisuudella * Mahdollisuus varustaa kuljetuspyörillä HETI SAATAVILLA – Toimitus kaikkiin EU-maihin

Tahun pembuatan: 2003, Kondisi: bekas, Asembladora SCHNELL Idea 12/25 Hnedpfx Ageymb Nrsken Máquina recientemente desmontada en perfecto estado. 3 payoffs Payoffs: 3