Beli Ketegangan Klem Perakitan bekas (4.879)

Kondisi: bekas, Length (retracted): 6,000 mm Length (extended): 18,000 mm Crjdpfx Aeglamvjnzeg Belt width: 600 mm

Kondisi: bekas, Length (retracted): 8,800 mm Crjdpfxsglanzj Anzog Length (extended): 27,300 mm Belt width: 800 mm Type: MR3185-800

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 6.100 mm, lebar total: 3.600 mm, BOOSTON MACHINERY is a manufacturer of machinery and equipment for prefabricated house production plants. We produce fixed assembly tables, tilting tables, butterfly tables, and complete production lines. TECHNICAL DATA -> Table working length: 6000 mm; other lengths available from stock "3.0 m; 4.5 m; 6.0 m; 7.5 m; 9.0 m; 10.5 m; 12 m; 13.5 m; 15.0 m" -> Table working height: 700 mm (adjustable +/- 50 mm) -> Table working width: 3600 mm (width can be modified) -> Height range for prefabricated wall using SD-01 pneumatic clamps: 600 – 3400 mm -> Vertical locking pins: 120 – 200 mm (35 mm diameter) -> Horizontal transport of finished elements (additional option): pneumatically liftable roller set – 2 roller tracks at table edges -> Table drive: fixed table -> Pneumatic power supply – 8 bar for ER-02R version (with horizontal transport rollers) -> Maximum permissible load – 1 m2 of finished prefabricate (assuming max height of 3000 mm): 100 kg / 1 m2 ADDITIONAL OPTIONS Credpfx Aevv Rv Aenzeg 1. SD-01 pneumatic clamps 2. Set of pneumatically raised rollers on the tabletop (2 roller tracks) Fixed Assembly Table ER-02 is a universal workstation for the prefabrication of timber frame elements. The modular design of the work platform allows for expansion and connection with other tilting tables to form a complete production line. The fixed assembly table is available in lengths from 3 m to 15 m. The standard working area is 300 cm wide, with a 60 cm steel support bracket, making it possible to prefabricate elements up to 340 cm high when using SD-01 clamps.

Kondisi: baru, Tahun pembuatan: 2026, Assembly Robot BEFARD XGR 800.3 Crsdjibqr Topfx Anzeg Specification: * Full remote control – for both operation and device management * Three hydraulic extensions with a vertical reach of 5.55 m * Powered by combustion engine (optionally with additional power supply from a 230 V electric motor or Li-ion batteries) * Possibility of simultaneous operation on 230V mains and battery charging (for the Li-ion version) * Dual-circuit vacuum system * Maximum lifting capacity: 800 kg * 8 vacuum suction cups * Rotating frame with suction cups (hydraulic) – remote control operation * Side shift of the suction cup frame (right/left by 10 cm – hydraulic) * Tilting frame with lateral suction cups (manual or hydraulic, depending on the machine) * Tilting frame with suction cups (enables lifting from a horizontal to a vertical position hydraulically) * Non-marking tracks * Two operating modes – fast and slow * Choice of colour Additional optional equipment: * HS spacers * Valves * Frame tilting with suction cups (hydraulic – remote control) * Forks * Anti-overload system * Hook * LED lamp * 230 V wired power supply (for combustion engine version) Other available models: XGR800.1 with one hydraulic extension, vertical reach 3.9 m XGR800.2 with two hydraulic extensions, vertical reach 4.75 m Petrol engine – VANGUARD brand, 10 HP / 5.5 kW

Kondisi: sangat baik (bekas), Lebar kerja maksimum 9000 mm Tinggi kerja maksimum 1100 mm 6 bagian penekan atas, masing-masing 1520 mm 18 penjepit depan Cjdpsxnwpiefx Anzjrg Lebar total 13000 mm Tinggi total 2200 mm

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Retraktor EV Pneumatico z automatycznym zwijaniem kabla / Uchwyt do przewodu ładowania Retraktor EV marki Pneumatico to innowacyjny uchwyt z automatycznym zwijaniem przewodu, który rewolucjonizuje proces ładowania pojazdów elektrycznych. Dzięki tej konstrukcji nie tylko ładowanie pojazdu, ale również zachowanie porządku jest wyjątkowo łatwe. Zwijarka dostępna jest w 4 wariantach o różnych udźwigach: EV0, EV1, EV2, EV3. Do czego stosowany jest Pneumatico Retraktor EV? Retraktor EV służy do obsługi przewodu ładującego pojazdu elektrycznego. Obudowa retraktora wykonana jest z ocynkowanej stali, co zapewnia odporność na warunki atmosferyczne. Mechanizm obraca się o 180 stopni, ułatwiając manipulację przewodem. Nowoczesny design oraz powłoka proszkowa gwarantują estetyczny wygląd. Lina retraktora ma długość do 300 cm i wykonana jest ze specjalnych, wysokowytrzymałych włókien Dyneema, które nie uszkadzają karoserii. Na końcu liny znajduje się obrotowy uchwyt, który zapobiega skręcaniu przewodu. Siłę zwijania można regulować za pomocą klucza. Montaż urządzenia jest szybki i prosty. Zawieszony przewód pozostaje zawsze czysty, podobnie jak ręce operatora. Dostępne udźwigi: od 1,00 kg do 8,00 kg (w zależności od wybranej wersji). Czy Pneumatico EV Retraktor pasuje do każdego przewodu ładowania? Tak. Standardowy zakres średnic przewodów wynosi od 16,5 do 32 mm, a udźwig retraktora to 1,00–8,00 kg. Jeżeli średnica przewodu odbiega od standardu, wykonujemy uchwyt o wymaganej średnicy oraz stosujemy retraktor o wyższym udźwigu. Retraktor EV Pneumatico to idealne rozwiązanie do użytku prywatnego i komercyjnego. Pneumatico Retraktory kablowe – seria EV (EV0 / EV1 / EV2 / EV3) Oferujemy sprężynowe retraktory Pneumatico o różnych zakresach udźwigu – idealne do zastosowań przemysłowych przy prowadzeniu przewodów i odciążaniu narzędzi. Udźwig / modele: EV0: 1–2,5 kg EV1: 2–4 kg EV2: 4–6 kg EV3: 6–8 kg Średnice przewodów (dostępne dla wszystkich modeli EV): 16,5–18,5 mm 19–20 mm 21–22 mm 22,5–24 mm 24,5–26 mm Cjdpfxjygv Dke Anzorg 26,5–28 mm 28,5–30 mm 30,5–32 mm

Kondisi: bekas, 2 units available See also my other offers in the field of automotive measurement technology. Bandwidth up to 100 kHz Cjdpfx Aewm Imxonzorg Safe voltage measurement in DC high-voltage systems Galvanically isolated high-voltage divider For applications in electric and hybrid vehicles Direct connection to SENS modules Permitted application areas according to CAT I and CAT II

Kondisi: bekas, Tahun pembuatan: 2012, Mesin dalam kondisi operasional. Silakan minta spesifikasi dan detailnya. Credpfx Anjywi Apozeg Tersedia 2 unit!

Tahun pembuatan: 2002, Kondisi: bekas, RODEA MOD. S hydraulic book press - CE compliant - used Crodjwr A Stopfx Anzeg - Year 2002

Kondisi: bekas, HYDRAULIC ROTARY CLAMP TAYLOR - USED - Working length: 2400 mm Csdjwrm S Dspfx Anzerg - Working width: 800 mm - 20 sections - 3 pressure elements per section

Kondisi: bekas, Tool assembly stand SK 40 Credpfsrrii Uox Anzsg

Kondisi: baik (bekas), Meyer fork positioner with load-holding clamp Condition: used Size: FEM 2 Crodpfswn Ic Njx Anzjg

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 500 t, DURENDUS 500 T Workshop Press – C-Frame Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here was built and delivered to a customer as a custom order. We can manufacture this machine for you at short notice—with individual options as required. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €46,950 net Options (upon request): The listed options are based on completed customer projects and allow targeted customization of the machine for specific applications. The base machine represents a functional standard version—in most cases, it is supplemented and configured with additional equipment for project-specific needs. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of pressing ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening block in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Information * Design: Workshop press * Pressing force: 500 t (optionally adjustable) * Total weight: approx. 5,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 400 mm * Piston rod: Ø 265 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 8.6 mm/s * Return speed: 15.3 mm/s ==== Hydraulics & Drive * Pump capacity: 65 l/min * Motor power: 30 kW * Hydraulic tank: 150 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC Cjdpfsy H Drwex Anzsrg ==== Controls & Operation * Manual lever control * Fine adjustment via manual lever * Connection: 400 V / 50 Hz * Total connected load: approx. 32 kW ==== Equipment * Height-adjustable crossbeams with bolt locking * Chain mechanism for table adjustment * Pressure gauge * Emergency stop switch * CE certification * Two-layer paint finish according to RAL ===== Pressing, removal, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements because they fully comply with all aspects of the Brazilian national safety standard NR 12, which builds on these. Our main strengths are special-purpose machine manufacturing and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 400 t, DURENDUS 400 T Workshop Press – C-Frame Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here was built and delivered on customer request. We can manufacture this machine for you on short notice – gladly considering individual options. This is a hydraulic workshop press for insertion, straightening, and assembly work in workshop and industrial environments. Base price: €35,950 net Options (on request): The listed options are based on realized customer projects and allow targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually enhanced with additional equipment and configured project-specifically. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral movement of the ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening block in combination with table plate * LED lighting * Foot pedal * Cooling ===== Technical Data + Information: ==== General Data * Type: Workshop press * Pressing force: 400 t (optionally adjustable) * Total weight: approx. 4,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm Cedpey H Dn Eofx Anzjrg * Installation height: 250–900 mm (variable) ==== Table & Ram * Usable width of crossbeam: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 360 mm * Piston rod: Ø 235 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 7.8 mm/s * Return speed: 13.7 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 120 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connected load: approx. 23 kW ==== Standard Equipment * Height-adjustable crossbeams with pin locking * Chain mechanism for table adjustment * Manometer for pressure indication * Emergency stop switch * CE certification * Two-layer coating according to RAL ===== Pressing in, pressing out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which builds on these standards. Our major strength is custom machine building and press automation. We supply customized hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 300 t, DURENDUS 300 T Workshop Press – C-Frame Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on a customer order. We can manufacture this machine for you at short notice – with consideration for individual options on request. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €22,450 net Options (on request): The listed options are based on previous customer projects and enable targeted adaptation of the machine to the specific application. The base machine provides a functional standard design – in practice, it is usually enhanced with additional features and configured according to project requirements. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment Csdpfx Ajy H Df Rsnzsrg * Lateral movement of the press ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening block in combination with table plate * LED lighting * Foot switch * Cooling system ===== Technical Data + Information: ==== General Information * Design: Workshop Press * Pressing force: 300 t (optional adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,800 mm ==== Working Area * Clear width: 1,600 mm * Open throat depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 330 mm * Piston rod: Ø 205 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 9.3 mm/s * Return speed: 15.2 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 90 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual lever operation * Fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connected load: approx. 23 kW ==== Equipment * Height-adjustable crossbeam with pin locking * Chain mechanism for table adjustment * Manometer for pressure display * Emergency stop switch * CE certification * Two-layer coating to RAL standard ===== Pressing, extracting, assembly operations, straightening tasks, workshop usage, maintenance Workshop press, hydraulic press, C-frame press, single-column press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply fully with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core strength lies in special machine construction and press automation. We offer custom-built hydraulic presses at surprisingly low prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 200 t, DURENDUS 200 T Workshop Press – C-Frame Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been manufactured and delivered as a customer order. We can produce this machine for you again at very short notice – and gladly incorporate your individual requirements. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €10,750 net Options (on request): The options listed are based on customer projects that have been implemented and allow precise customization of the machine for your application. The base machine is a functional standard configuration – in practice, it is most often extended with additional features and tailored project-specifically. - Table plate with X-shaped T-slot 800 × 1,200 × 120 mm - Pressure adjustment Csdpfxoy H Ddms Anzorg - Lateral cylinder carriage (1,000 mm) - Press brake tooling - Anti-rotation cylinder with manual stroke setting - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 200 t (optionally adjustable) Total weight: approx. 2,100 kg Overall dimensions (W × D × H): 2,000 × 900 × 2,750 mm ==== Working Area Clear width: 1,500 mm Open throat depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,500 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 280 mm Piston rod: Ø 165 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.4 mm/s Return speed: 11.4 mm/s ==== Hydraulics & Drive Pump capacity: 24.5 l/min Motor power: 7.5 kW Hydraulic tank: 54 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Manual lever control Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total power consumption: approx. 8 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Two-coat paint finish according to RAL ===== Pressing, pressing-out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, open-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our hydraulic presses are manufactured according to German machine guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply fully with all elements of Brazil’s national safety directive NR 12, which builds upon these standards. Our core strength lies in custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. We predominantly use components from leading European manufacturers for the hydraulic systems.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 180 t, DURENDUS 180 T Workshop Press – Single-column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here was custom-built and delivered to a client. We can supply this machine from stock or manufacture it anew – gladly taking your individual options into account. This is a hydraulic workshop press designed for pressing, straightening, and assembly work in maintenance and industrial environments. Base price: €8,950 net Options (upon request): The options listed are based on realized customer projects and allow precise customization of the machine for the respective application. The basic machine represents a functional standard configuration – in practice, it is most often expanded by additional features and configured specifically for each project. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Pressure adjustment - Lateral displacement of the ram (900 mm) - Press brake tooling - Anti-rotation cylinder with manual travel adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ===== Technical Data & Information: ==== General Specifications Design: Workshop press Pressing force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm ==== Working Area Clear width: 1,400 mm Open throat depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Rapid approach speed: 8.1 mm/s Return speed: 11.8 mm/s ==== Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Control lever operation Manual fine-tuning via control lever Connection: 400 V / 50 Hz Total connected load: approx. 8 kW ==== Equipment Crodpfx Ansy H A T Tjzjg Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Two-coat paint finish to RAL standard ===== Press-fit, Press-out, Assembly work, Straightening, Workshop applications, Maintenance Workshop press, Hydraulic press, Single-column press, C-frame press, Assembly press, Straightening press, Industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements as they comply fully with the national Brazilian safety guideline NR 12, which is based on these standards. Our core strength is special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 150 t, DURENDUS 150 T Workshop Press – Single-column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was customized and delivered on behalf of a customer. We can supply this machine from stock or manufacture it new – including individual options as requested. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in workshops and industrial environments. Base price: €6,900 net Options (upon request): The listed options are based on realized customer projects and enable targeted customization of the machine for the specific application. The base machine provides a functional standard configuration – in practice, additional features are usually added and the configuration adapted to each project. • Table plate with X-shaped T-slot, 700 × 1,000 × 100 mm • Pressure adjustment • Lateral displacement of the press ram (900 mm) • Bending die • Anti-rotation cylinder with manual travel adjustment • V-profile straightening block in combination with table plate • LED lighting • Foot pedal • Cooling system ===== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 150 t (optionally adjustable) Total weight: Approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Clear depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Usable width of cross beam: 1,250 / 670 mm Ram stroke: 400 mm Crjdpfx Aney Hrkuszsg Cylinder diameter: Ø 230 mm Piston rod diameter: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Manual lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Two-coat finish to RAL standard ===== Press-fitting, removal, assembly, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual quote. Our hydraulic presses are built to both German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements by also fully complying with the Brazilian national safety directive NR 12, which builds upon these standards. Our main strength is custom machine building and press automation. We offer customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 120 t, DURENDUS 120 T Workshop Press – Single-column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered to a customer as a specific order. We can supply this machine from stock or manufacture it new for you – gladly taking individual options into account. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in workshop and industrial settings. Base price: €6,450 net Available options (on request): The listed options are based on realized customer projects and allow targeted customization of the machine to your specific application. The base machine provides a functional standard version – in practice, it is most often upgraded with additional equipment and configured to meet project requirements. - Table plate with X-shaped T-slot, 700 × 1,000 × 100 mm - Pressure adjustment - Lateral movement of press ram (900 mm) - Bending tool - Anti-rotation cylinder with manual stroke limitation - V-profile straightening frame in combination with table plate - LED lighting - Foot switch - Cooling ==== Technical Data & Information: ==== General Specifications Design: Workshop press Pressing force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Total dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working Area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Manual lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbars with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-coat paint finish according to RAL ===== Pressing, pressing out, assembly work, straightening work, workshop applications, maintenance Crjdpfx Anoy Hqwgjzjg Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual quote. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all aspects of the national Brazilian safety guideline NR 12, which is based on these standards. Our strength lies in custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 100 t, DURENDUS 100 T Workshop Press – C-frame Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered to a customer. We can supply you with this machine from stock or manufacture it new—gladly considering individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial settings. Base price: €5,990 net Options (on request): The listed options are based on completed customer projects and allow precise adaptation of the machine to the specific application. The base machine is a functional standard version—in practice, it is in most cases expanded with additional equipment and configured project-specifically. • Table plate with X-shaped T-slot 650 × 900 × 90 mm Crodpfx Aey Hqqaonzsg • Pressure adjustment • Lateral movement of the ram (700 mm) • Bending tool • Anti-rotation cylinder with manual travel distance adjustment • V-profile straightening block in combination with table plate • LED lighting • Foot switch • Cooling ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 100 t (optionally adjustable) Total weight: approx. 900 kg Overall dimensions (W × D × H): 1,600 × 900 × 2,550 mm ==== Working Area Clear width: 1,000 mm Open throat depth: 350 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,000 / 620 mm Ram stroke: 400 mm Cylinder diameter: Ø 190 mm Piston rod: Ø 115 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.5 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor output: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with locking pins Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Dual-layer paint according to RAL ===== Pressing, extraction, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machine directives, as well as European machine directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they are fully compliant with the national Brazilian safety regulation NR 12, which builds upon these. Our key strength lies in custom machine building and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics of the presses, we predominantly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 80 t, DURENDUS 80 T Workshop Press – Single-column Press – 900 mm clear width, 400 mm stroke The machine shown here has already been built and delivered to a customer. We can supply this machine from stock or manufacture it new – gladly accommodating individual options. This is a hydraulic workshop press for pressing, straightening, and assembly operations in workshop and industrial environments. Basic price: €4,990 net Options (on request): The options listed are based on realized customer projects and enable targeted customization of the machine to the specific application. The base model is a functional standard version – in practice, it is most often enhanced with additional equipment and configured to suit project requirements. Codpfx Aey Hqlqsnzorg - Table plate with X-shaped T-slot 600 × 900 × 30 mm - Pressure adjustment - Lateral slide of the press ram (600 mm) - Bending tool - Anti-twist cylinder with manual travel adjustment - V-profile straightening block in combination with the table plate - LED lighting - Foot pedal - Cooling ==== Technical Data & Information: ==== General Information Design: Workshop press Pressing force: 80 t (optionally adjustable) Total weight: approx. 800 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working Area Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 180 mm Piston rod: Ø 100 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.5 mm/s Return speed: 10.9 mm/s ==== Hydraulics & Drive Pump capacity: 11.5 l/min Motor power: 3 kW Hydraulic tank: 24 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 3.5 kW ==== Equipment Height-adjustable crossbeam with bolt locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Two-coat lacquer finish according to RAL ===== Pressing in, pressing out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety standards because they fully comply with the Brazilian national safety regulation NR 12, which builds upon these standards. Our core strength is special machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, mainly components from leading European manufacturers are used.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 60 t, DURENDUS 60 T Workshop Press – C-Frame Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply this model from stock or manufacture it new – gladly taking individual options into account. This is a hydraulic workshop press suitable for pressing, straightening, and assembly work in both workshop and industrial environments. Base price: €4,550 net Options (on request): The listed options are based on realized customer projects and allow precise adaptation of the machine to your specific application. The base machine is supplied as a functional standard version, but in practice is most frequently upgraded and configured with project-specific features. - Table plate with X-shaped T-slot 600 × 900 × 30 mm - Pressure adjustment - Side-shifting press ram (600 mm travel) - Bending tool Codpfxjy Hi D Ee Anzerg - Anti-rotation cylinder with manual travel adjustment - V-profile straightening block combined with table plate - LED work light - Foot switch - Cooling unit ==== Technical Data & Information: ==== General Design: Workshop press Press force: 60 t (optionally adjustable) Total weight: approx. 750 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Workspace Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 150 mm Piston rod: Ø 95 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 8.5 l/min Motor output: 2.2 kW Hydraulic tank: 22 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Manual lever control Fine adjustment via hand lever Connection: 400 V / 50 Hz Total power requirement: approx. 2.5 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Two-layer finish to RAL standard ===== Pressing, pressing-out, assembly jobs, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, straightening press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Our presses exceed Canadian and European safety requirements as they also comply fully with the Brazilian national safety standard NR 12, which builds on these. Our major strengths are custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. The hydraulic systems primarily feature components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 30 t, DURENDUS 30 T Shop Press – Single-column Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered for a customer order. We can supply you with this machine from stock or manufacture it new – including individual options as required. This is a hydraulic shop press for pressing, straightening, and assembly work in workshop and industrial settings. Base price: €3,550 net Options (on request): The options listed are based on realized customer projects and allow targeted adaptation of the machine to the respective application. The base machine represents a functional standard version – in practice, it is usually expanded with additional equipment and project-specific configurations. - Table plate with X-shaped T-slot (from 60 t) - Pressure adjustment - Sideways movement of the press ram (from 60 t) - Bending tool (from 60 t) - Anti-rotation cylinder with manual stroke setting - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data + Information: ==== General Specifications Design: Workshop press Press force: 30 t (optionally adjustable) Total weight: approx. 500 kg Cjdpfx Anjy Hixcszjrg Overall dimensions (W × D × H): 1,150 × 700 × 2,350 mm ==== Working Area Clear width: 700 mm Open throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 700 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 115 mm Piston rod: Ø 65 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 10.4 mm/s Return speed: 15.3 mm/s ==== Hydraulics & Drive Pump capacity: 6.5 l/min Motor output: 1.5 kW Hydraulic tank: 14 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Manual lever control Fine manual adjustment via lever Connection: 400 V / 50 Hz Total power consumption: approx. 2 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Dual-layer lacquer finish to RAL ===== Pressing, extraction, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machine Directives and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which builds on these standards. Our strength is custom machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics feature components mainly from leading European manufacturers.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 66N-1507, Micafil Mesin Penggulung OFAnII No. 402 No. 66 N - 1507 Kawat 0,006 - 1,5 mm Rentang penggulungan 80 x 500 mm Ekor tetap tidak ada Micafil Mesin Penggulung OFAnII No. 403 No. 66 N 1504 Kawat 0,006 - 1,5 mm Rentang penggulungan 80 x 500 mm Crjdpfx Ajylmhkonzog Rentang penggulungan

Kondisi: bekas, nomor mesin/kendaraan: 307264.3, Mesin Penggulung Meteor Compact Crodjylnb Eopfx Anzeg Tipe 307-01 Diameter gulungan 80 mm x 350 mm Ketebalan kawat 0,15 - 0,5 mm