Beli Langit-Langit Inlet Udara bekas (4.265)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Dinding pengecatan Schuko dengan unit udara masuk + plafon udara masuk Dijual dengan harga khusus, namun harus dibongkar sendiri Ffsdpfx Ajxvivqeagjw Data teknis: lihat foto Lokasi: dari lokasi Saarland

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Booth cat / semprot GALATEK digunakan untuk pengecatan bagian furnitur. Ukuran booth sekitar 3x2,2x1 m. Termasuk hisap, lihat foto. Penjualan bisa termasuk teknologi penyeimbang tekanan (suplai udara plafon). Untuk informasi lebih lanjut silakan hubungi saya. Ffsdpfx Aasu Au Eljgjw

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, Tahun pembuatan: 2025, Peralatan: kompresor udara sekrup ganda rotary mesin diesel 190 cfm baru, dipasang di trailer Merek/model: MCWEL MC190S-I Ffjdpfjx Izktsx Aagew Kapasitas aliran udara bebas: 190 cfm Tekanan kerja: 100 psi Merek/model mesin: Isuzu 4JB1ZY-01 Daya terukur: 50 kW, 2500 rpm

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 4.240 h, 2019 | Isoli PNT220NLX mounted on Nissan NT400 | Used truck-mounted aerial work platform | 4,240 operating hours | 53,375 km 📍 Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34,000 or Make an Offer. Payment upon delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points: 57 approved ✅ 3 minor issues ℹ️ 2 faults ⚠️ Ffjdpfox Twahox Aagow 📌 Inspector's Comments: Vehicle defects: 1. Chassis and bodywork are rusted. 2. Headlight not working, rear indicator not functioning. 3. Check engine light was on but has been reset, probably an issue with the AdBlue system (fault temporarily cleared). 4. Hydraulic tank is deformed. 5. Hydraulic control units are unmarked. 6. Seat is torn. 7. Cabin is dirty. 8. Body panels on the driver’s side are of mismatched colors. 9. Warning triangle and first-aid kit are missing. 10. Entry step heavily worn and rusted. 11. Required technical lifting equipment and vehicle inspections are valid. 12. Technical maintenance and operator’s manual is included. 13. No apparent major defects observed apart from those listed. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference “39451 Equippo” is commonly used when searching for more information online. 💡 Why choose this machine and our service: ✔ Comprehensive professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment? We offer useful tools and resources for all equipment owners and operators – conveniently available on our platform.

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 4.116 h, 2016 | Isoli PT200 on Nissan NT400 | Used truck-mounted aerial platform | 4116 operating hours | 55182 km 📍Location: Lithuania 🚛 Delivery to your destination available – Use our shipping calculator for an instant transport quote! 💰 Buy now for EUR 37,100 or submit your offer. Payment upon delivery available for a low fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 58 inspection points: 57 approved ✅ 1 with minor issue ℹ️ 0 urgent repairs ⚠️ 📌 Inspector’s note: Two of the sensors (shown in the photo) needed to be replaced. 📄 Want the full inspection report, additional photos, or a video? Tip: The reference “39378 Equippo” is often used for further details online. 💡 Why choose this machine and our service? ✔ Thorough professional inspection ✔ Delivery to your location possible Fodpfx Aex Twabeagjfw ✔ Money-back guarantee ✔ Secure, flexible payment options 🔄 Exploring other machinery? We offer useful tools and resources for equipment owners and operators – all conveniently available on our platform.

Kondisi: siap digunakan (bekas), Tabung udara, tangki udara bertekanan, bejana udara tekan, peralatan bekas Pabrikan: Magnet Model: KF 904 Dimensi keseluruhan: Lebar: 800 mm Kedalaman: 800 mm Tinggi: 2680 mm Berat: 1008 kg Tahun produksi: 2016 Tekanan kerja: 11 Bar Ffsdexciqnjpfx Aagew Suhu operasi: -20°C hingga +50°C Kapasitas tangki: 1000 liter

Tahun pembuatan: 2021, Kondisi: baik (bekas), 87e6d0c7-70cc-4889-911a-b66d9e388b71 Ffedexzuxbopfx Aagjw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 50.708 h, Fungsionalitas: berfungsi sepenuhnya, Pengering udara tekan Atlas Copco FD1750+ 14 bar Ffodpfx Aeyr A Uyeagow 105 m3/menit

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, kapasitas tangki: 1.000 l, suhu operasional: 50 °C, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Pengajuan penawaran mengikat untuk pengambilan tepat waktu antara 04.05.26 dan 07.05.26. RINCIAN TEKNIS Kapasitas: 1.000 l Suhu operasi maks.: 50 °C RINCIAN MESIN Dimensi & Berat Dimensi (P x L x T): 800 x 700 x 2.200 mm Berat mesin: 250 kg Referensi eksternal: Lot 72 Fodpfx Aaeyr Nf Segjfw

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 9.203 h, 2009 | MAN TGS 26.320 6x2-2 BL with Oil Steel Eagle 3526 (35m) | Used Truck-mounted Aerial Work Platform | 9,203 hours | 115,506 km 📍Location: France 🚛 Delivery available – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 72,000 or Make an Offer. Payment on delivery available for a low fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points: 62 approved ✅ 0 incomplete ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: When the truck is stationary for an extended period, it gradually lowers itself and must be lifted manually to reset the alarm. Replacing the relays also works; however, the truck has not been tested on the road. There were electrical issues with the aerial platform, which were corrected during the inspection. The machine is prone to malfunctions. An additional 24V emergency pump has been installed. The truck has low mileage and is otherwise a well-functioning machine. It was recently serviced by Oil Steel. 📄 Want access to the full inspection report, extra photos, or a video? Tip: The reference "38953 Equippo" is commonly used to find more information online. 💡 Why choose this machine and our services: ✔ Comprehensive professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering alternatives? We provide useful tools and resources for equipment owners and operators – all easily accessible on our platform. Fodpfxjydf Hpj Aagefw

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 2.474 h, 2014 | CTE ZED 20.2 H on Renault 120 DXI Maxity | Used Truck-Mounted Aerial Work Platform | 2474 operating hours | 27326 km 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 36,500 or Make an Offer. Ffodpeyailhjfx Aagsw Payment upon delivery available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points: 49 approved ✅, 2 imperfect ℹ️, 0 issues ⚠️ 📌 Inspector's Comment: Good general and operational condition. Address oxidation on the boom. The platform’s year of manufacture is 2014, but the chassis and initial registration are from 2015. 📄 Want to see the full inspection report, additional photos, or a video? Tip: Reference “39904 Equippo” is commonly used to look up more details online. 💡 Why this machine and our service stand out: ✔ Comprehensive professional inspection ✔ Jobsite delivery available ✔ Money-Back Guarantee ✔ Secure and flexible payment options 🔄 Considering alternative equipment? We offer valuable tools and resources for all equipment owners and operators – easily accessible through our platform.

Kondisi: bekas, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal airflow 1451 m³/h Vacuum 1398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Connection 400 Volt, 50 Hz - equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - mechanical filter cleaning via vibrating motor Fsdpfx Aaer R Ewlogefw - 2 discharge pipes at the bottom for dust collection bags, Ø each 500 mm, reduced to Ø 300 mm - dry fire line with C-hose connection, fire department connection for filter fires - differential pressure switch for filter contamination detection - without control unit (no control present) - mounted on 4 steel tube legs (square tube 40x40 mm) Overall height shown in pictures: 3050 mm Required space L x W: 1850 x 1000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic shavings.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 50.708 h, Fungsionalitas: berfungsi sepenuhnya, Pendingin Pengering Udara Bertekanan FD1750+ Ffjdpfx Ajyrxtfeagsw 400V/50 Hz 14,00 bar 105,00 m³/menit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Pengering udara bertekanan Atlas Copco FX13, 10,02 m³/menit Ffedpfxjyrdifj Aagsw

Kondisi: baru, Tahun pembuatan: 2024, Furnace heat output: 175 kW Operating output: 140 kW Flue outlet diameter: 200 mm Hot air supply ducts: 3 x 250 mm Combustion chamber length: 950 mm Combustion chamber width: 600 mm Combustion chamber height: 860 mm Air flow rate: 8,900 m³/h Power consumption: 3,500 W Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Stove height without hot air supply ducts: 2,200 mm Stove width: 930 mm Ffedpfx Aok Utrpsagsw Stove length without flue gas fan: 1,700 mm Weight: 615 kg

Kondisi: bekas, Tahun pembuatan: 2010, MERLIN_SK_613_2010 Fedpsyn R H Nofx Aagsfw

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: N SERIE: 99 1220, Varilni stroj za šivanje polipropilenskih škatel z vročim zrakom. Ročno podajani varilni stroj za polipropilen. Fjdpfjw Elrpex Aagefw

Kondisi: bekas, cocok untuk pemanasan minyak termo (180 kW) Suhu pemanggangan maksimal 220-250 °C suhu dapat diatur kecepatan variabel tak terhingga lebar jalur 600 mm Tutup dengan perangkat pengangkat elektrik cocok untuk injeksi uap (pemanasan, hasil produk) 400V-50 Hz-42A Ffodpoyn Dc Rsfx Aagew Dimensi (P x L x T): ± 10.000 x 2.000 x 2.700 mm waktu pemanggangan min.: 4 menit waktu pemanggangan maks.: 60 menit

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), laju aliran volumetrik: 486 m³/jam, lebar total: 610 mm, panjang total: 625 mm, tinggi total: 1.030 mm, berat keseluruhan: 92 kg, tegangan masuk: 230 V, suhu lingkungan (maks.): 50 °C, suhu lingkungan (min.): 1 °C, jenis pendinginan: udara, tekanan (maks.): 14 batang, daya: 0,98 kW (1,33 hp), frekuensi input: 50 Hz, Perlengkapan: Pelat tipe tersedia, Kami menawarkan Friulair ACT 80 dryer udara bertekanan baru ini, tahun produksi 2022. Ffjdpfjyf Earex Aagew Tegangan: 230 V Frekuensi: 50 Hz Daya terpasang: 0,98 kW Arus: 4,6 A Tekanan kerja maks.: 14 bar Debit udara: 8.100 l/menit / 486 m3/jam Refrigeran: R407C Berat: 105 kg (bruto) Pembuangan kondensat: Bekomat Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: bekas, Tahun pembuatan: 2001, jenis arus masuk: tiga fasa, luas filter: 20,4 m², kapasitas hisap: 3.200 m³/jam, berat keseluruhan: 350 kg, Penghisap kabut oli mesin CNC, filter separator merek Donaldson Torit. Perangkat ini dirancang untuk filtrasi kabut oli (baik emulsi maupun oli murni), uap dan asap yang dihasilkan dari berbagai proses pemesinan (machining). Efisiensi filtrasi hingga 99,97% Model: DMC-D1 Kipas 2,2 kW, tiga fasa Fodpfxjymk Ude Aagjfw Diameter inlet: 250 mm Kapasitas: 3200 m³/jam Luas filtrasi: 20,4 m² Tahun produksi: 2001 Dimensi: Tinggi – 2,90 m Lebar – 0,93 m x 0,75 m Berat: 350 kg Nomor inventaris: 1111

Kondisi: bekas, Manufacturer: Mineralwerke Fedoh D Hmvopfx Aagofw Model: PZ 250 M4 Voltage: 380 V Power: 55 kW Weight: 1,950 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, Pengering pendingin Pabrikan: KAESER Tipe: TE 121 Tahun pembuatan: 1999 Ffedpfx Aaettwzbsgjw Daya motor nominal: 2,1 kW Perawatan dilakukan oleh perusahaan Kaeser. 24226ä

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, 18,60 m³/menit Fjdpfxoym Ub Ue Aagsfw Tahun pembuatan: 2011

Tahun pembuatan: 2008, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, berat keseluruhan: 400 kg, panjang total: 2.200 mm, tinggi total: 1.500 mm, tekanan berlebih (maks.): 10 batang, kecepatan rotasi (maks.): 4.860 rpm, nomor mesin/kendaraan: 28838, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! Mengajukan penawaran berarti wajib melakukan pengambilan tepat waktu, yaitu antara 11.05.2026 dan 13.05.2026 atau antara 18.05.2026 dan 21.05.2026! Fjdpfxjym Rwfj Aagofw Unit terdiri dari kompresor sekrup dan pengering refrigerasi. DETAIL TEKNIS Tekanan motor: 22 bar Tekanan lebih: 10 bar Kecepatan putar: 4.860 rpm Aliran volume: 3,02 m³/menit DETAIL MESIN Dimensi & bobot Dimensi (P x L x T): 2.200 x 860 x 1.500 mm Berat: 400 kg Referensi eksternal: Pieper - Lot 56

Tahun pembuatan: 2011, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, berat keseluruhan: 500 kg, panjang total: 2.000 mm, lebar total: 1.000 mm, tinggi total: 2.400 mm, tekanan: 12,75 batang, nomor mesin/kendaraan: CAI709141, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Pengajuan penawaran mewajibkan pengambilan tepat waktu baik antara 11.05.2026 dan 13.05.2026 atau antara 18.05.2026 dan 21.05.2026! DETAIL TEKNIS Fsdeym Rqfopfx Aagjfw Tekanan udara maksimum: 12,75 bar DETAIL MESIN Tegangan operasi: 230 V Frekuensi: 50 Hz Tegangan kompresor: 400 V Frekuensi kompresor: 50 Hz Daya terpasang: 3 kW Dimensi & Berat Dimensi (P x L x T): 2.000 x 1.000 x 2.400 mm Berat: 500 kg Referensi eksternal: Pieper - Lot 55