Beli Lem Panas Bala bekas (3.128)

Kondisi: bekas, UMUM Luas permukaan pertukaran: 0,99 m² Diameter luar: 200 mm Diameter dalam: 86 mm Panjang keseluruhan: 2.120 mm Isolasi: ada Lain-lain: diameter luar pipa sekitar 10 mm Lokasi: Bremen Plat identifikasi: Kondisi: bekas Penggunaan terakhir: farmasi ISOLASI Bahan mantel isolasi: baja tahan karat RUANG JAKET Volume ruang jaket: 7 liter RUANG PIPA Volume ruang pipa: 3 liter Bahan mantel: AISI316 (V4A) 1.4571 Jumlah pipa: 20 Tekanan kerja maksimum ruang jaket: 6,0 bar Panjang pipa: 1.980 mm Itsdpfx Ajxqchvsa Neb Diameter pipa: 8 mm Suhu kerja maksimum ruang pipa: 144 °C Tekanan kerja maksimum ruang pipa: 7,0 bar

Kondisi: bekas, EN Itedpfx Aaexqcg So Nob

Kondisi: bekas, kapasitas tangki: 2.700 l, EN: GENERAL Equipment: spray head, crane lugs Design: vertical Remarks: Technical drawing includes structural modifications External diameter: 1,600 mm Internal diameter: 1,500 mm Total width: 1,700 mm Total height: 2,900 mm Total length: 2,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 0.5 bar Max. overpressure: 0.99 bar Base design: mobile frame Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 0.50 bar Volume: 2,700 liters Double jacket volume: 90.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,000 mm Last application: transport container for viscous gels VESSEL Max. permissible operating temperature: 50 °C Isdpfx Aoxqcdqea Netb INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on upper head (DN 400) Outlet: 95 mm MATERIAL SPECIFICATION Exterior surface: marbled

Kondisi: bekas, kapasitas tangki: 2.330 l, GENERAL Equipment: crane lugs Design: suspended Remarks: Double jacket made of V2A around the lower cylinder section and the bottom; 3 stainless steel lugs; Parts of the insulation collar were cut off during dismantling; one vessel is not insulated (see photos) Outside diameter: 1,650 mm Inside diameter: 1,400 mm Total height: 2,150 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.2 bar Base type: support lugs Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 2,330 liters Double jacket volume: 165.0 liters Cylinder wall thickness: 6 mm Itedpfx Aexqb T Dja Nsb Double jacket material: V2A 1.4301 (AISI 304) Product-contact surface material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,130 mm Last application: pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Lower bottom temperature control: double jacket INSULATION Insulation jacket: riveted Insulation jacket material: aluminum EQUIPMENT Manway / dome: in top head (DN 400) Outlet: flange DN50 Note: dents on insulation jacket TECHNICAL DATA / DIMENSIONS Lower head wall thickness: 5.8 mm Upper head wall thickness: 7 mm

Kondisi: bekas, kapasitas tangki: 60.000 l, ENGLISH GENERAL Equipment: crane lugs Design: vertical Notes: Cylinder manway NW 600; minor cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Overall length: 12,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating pressure: 6.0 bar Max. overpressure: 1.5 bar Support type: feet Location: Bremen Technical documentation: drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 litres Double jacket volume: 105.0 litres Cylinder wall thickness: 5 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 9,000 mm Last use: rapeseed oil TANK Max. permissible operating temperature: 200 °C Number of feet: 4 Isdpfx Aasxqb Rvj Nstb HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in cylinder, in top head, in top head (DN 600) Outlet: flange DN80 Notes: dents on insulation jacket, manhole cover plated MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top wall thickness: 7 mm

Kondisi: bekas, Tahun pembuatan: 2014, kapasitas tangki: 25.000 l, UMUM Desain: horizontal Tahun pembuatan: 2014 Catatan: Material yang kontak dengan produk: 1.4402 (Aisi 316L); rangka: Fe (dicat); deskripsi teknis tersedia; diameter manhole 500 mm; dokumen teknis lengkap dapat dibeli dari produsen dengan biaya tambahan Lebar total: 2.550 mm Tinggi total: 2.900 mm Panjang total: 6.060 mm Pemanas/pendingin: tersedia Isolasi: tersedia Tekanan operasi maksimum yang diizinkan: 3,0 bar Tekanan maksimum: 3,0 bar Tipe dudukan: rangka Lokasi: Bremen Isdpfjxqb Dvex Aa Nstb Dokumentasi teknis: Sertifikat penerimaan Nameplate: Volume: 25.000 liter Material bersentuhan produk: V4A 1.4402 (AISI316) Kondisi: bekas ISOLASI Material isolasi: Busa PU Ketebalan isolasi: 100 mm PERLENGKAPAN Manhole / Dome: di atas tangki Saluran keluaran: tersedia

Kondisi: bekas, kapasitas tangki: 100.000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Some minor dents in heating coils, slight pitting with low depth at the base of the shell. External diameter: 3,800 mm Internal diameter: 3,600 mm Total height: 11,500 mm Heating/Cooling: present Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 6.0 bar Top head: dished (Klöpper head) Support type: feet Location: outdoor storage Technical documentation: drawing, various documents Cylinder thermal control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 100,000 liters Double jacket volume: 230.0 liters Isdpfx Aexqb Axoa Njtb Shell wall thickness: 18 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 9,870 mm Previous application: chemical industry VESSEL Specific gravity of medium: 2.0 (to/m³) Bottom head: dished (Klöpper head) Number of feet: 4 pcs HEATING/COOLING JACKET Bottom head temperature control: half-pipe coil EQUIPMENT Manhole / Dome: on cylinder, on top head (DN 600) Outlet: 150/50 mm MATERIAL SPECIFICATION Feet material: steel TECHNICAL DATA / MEASUREMENTS Bottom head wall thickness: 25 mm Top head wall thickness: 18 mm

Kondisi: bekas, kapasitas tangki: 630 l, UMUM Desain: tegak Diameter dalam: 800 mm Pemanas/Pendingin: tersedia Isolasi: tersedia Tekanan operasi maksimum yang diizinkan: 1,0 bar Pengaduk: pengaduk bilah miring Bentuk penyangga: kaki Lokasi: Bremen Dokumentasi teknis: gambar teknik Temperatur silinder: jaket ganda Label tipe: Volume: 630 liter Material jaket ganda: V2A 1.4301 (AISI304) Material kontak produk: V2A 1.4301 (AISI304) Kondisi: bekas Tinggi silinder: 1.000 mm Penggunaan terakhir: kimia TANGKI Jumlah kaki: 4 unit JAKET PEMANAS/PENDINGIN Temperatur dasar bawah: jaket ganda ISOLASI Material mantel isolasi: baja tahan karat Isdpsxqbuujfx Aa Nstb PERLENGKAPAN Lubang manusia / Kubah: di bagian atas Keluaran: tersedia MATERIAL KAKI Material kaki: baja tahan karat PENGADUK 1 Penempatan pengaduk: eksentrik di bagian atas

Kondisi: bekas, kapasitas tangki: 5.000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Remarks: 2 vessels (6169-3+5) with broken intermediate flange on the gearbox Speed: 26 - 101 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be checked) Overall height: 4,200 mm Heating/cooling: available Power: 6.8 kW Max. permissible operating temperature: 60 °C Max. permissible operating overpressure: 10.0 bar Shaft sealing: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support type: Ring Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Double jacket volume: 98.0 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4541 (AISI304) Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,750 mm Last intended use: Chemicals Iedpfxjxqbuhj Aa Netb VESSEL Max. permissible operating temperature: 60 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: on the top cover Outlet: Flange DN80 Remark: slight residues/adhesions MATERIAL QUALITY Feet material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 380/660 volts Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.4 mm Agitator arrangement: centered in the top cover Top cover wall thickness: 9.0 mm

Kondisi: bekas, kapasitas tangki: 1.000 l, EN-001 Iedpfx Ajxqbq Asa Njtb

Kondisi: bekas, kapasitas tangki: 3.000 l, de2en-20240623-001 Iodpfxoxqbqcs Aa Njtb

Kondisi: bekas, kapasitas tangki: 3.000 l, 1 Iodsxqbp Eepfx Aa Njtb

Kondisi: bekas, kapasitas tangki: 950 l, GENERAL Design: vertical Remarks: Frame with platform made of steel included in the scope of delivery Speed: 20 - 120 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Total height: 3,350 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Top cover: removable / hinged top cover Agitator: beam agitator Mounting type: frame Location: Bremen Cylinder temperature control: half-pipe coil Volume: 950 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,120 mm Previous use: bitumen HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation material: aluminum EQUIPMENT Manhole / Access: handhole Outlet: flange DN50 Iodexqbpfjpfx Aa Njtb Note: slight residues, dents on the insulation jacket MATERIAL SPECIFICATION Flange material: steel Foot material: steel AGITATOR 1 Voltage: 400 volts Agitator arrangement: centrally mounted in top cover Agitator equipment: 1 agitator pair of blades made of standard steel; 1 coupling piece for shaft is missing (see photos)

Kondisi: bekas, kapasitas tangki: 3.120 l, GENERAL Design: suspended Notes: 1 reflux condenser included in delivery (total height stated includes reflux condenser); lugs made of Fe; ground-off connections in the cylinder (see photos) Speed: 13 - 72 rpm Outer diameter: 1,460 mm Inner diameter: 1,400 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 5,400 mm Heating/Cooling: available Power: 7.5 kW Agitator: beam agitator Stand type: lugs Location: Bremen Technical documentation: Drawing Cylinder temperature control: double jacket Volume: 3,120 liters Double jacket volume: 122.0 liters Cylinder wall thickness: 4 mm Double jacket material: V2A 1.4541 (AISI304) Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,610 mm Last application: adhesive production HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / dome: in top head (DN 400) Outlet: flange DN80 Iodpfx Aexqblgea Nstb Remark: slight residues AGITATOR 1 Voltage: 380/660 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator arrangement: centrally in top head Top head wall thickness: 6 mm

Kondisi: bekas, kapasitas tangki: 1.100 l, GENERAL INFORMATION Design: Suspended Remarks: Former support feet were cut off during dismantling and are no longer present; 1 heating connection was cut off; vessel with heavy residues Isdpfx Ajxqbi Eoa Njtb Speed: 274 rpm Outer diameter: 1,090 mm Inner diameter: 1,040 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,200 mm Heating/Cooling: available Power: 2.2 kW Shaft seal: Mechanical seal with thermosiphon vessel Agitator type: Inclined blade agitator Location: Bremen Cylinder temperature control: Double jacket Volume: 1,100 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,200 mm Last application: adhesive production HEATING/COOLING JACKET Bottom temperature control: Double jacket FEATURES Manhole: in the top head (DN 400) Outlet: flange DN40 Note: manhole cover plated AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 230/400 Volt Agitator position: eccentric in the top head Agitator details: agitator blade partially bent (see photos)

Kondisi: bekas, kapasitas tangki: 4.500 l, EN_GENERAL Equipment: crane lugs Design: vertical Iodpexqbiljfx Aa Netb Remarks: Half-pipe coil only in the lower cylinder area Speed: 1445 rpm Inner diameter: 1,500 mm Ex-protected: Motor is ex-protected (compliance with applicable ATEX regulations under local conditions must be checked) Total height: 4,550 mm Heating/cooling: present Power: 5.5 kW Max. permissible operating overpressure: 6.0 bar Agitator: inclined blade agitator Mounting type: feet Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 4,500 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,390 mm Last application: chemicals VESSEL Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: half-pipe coil FEATURES Manhole/dome: in cylinder Note: slight residues Outlet: 55 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Feet material: stainless steel AGITATOR 1 Voltage: 400 Volts Current interrupter: Agitator arrangement: central on top head

Kondisi: bekas, kapasitas tangki: 586 l, GENERAL Design: vertical Remarks: Manufactured according to ASME guidelines. Internal diameter: 813 mm Total height: 2,093 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 204 °C Max. permissible operating overpressure: 6.5 bar Max. overpressure: 2.75 bar Stationary design: mobile on rollers Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 586 litres Double jacket volume: 136.0 litres Cylinder wall thickness: 10 mm Contact material: enamel Condition: used Last application: pharmaceuticals Ijdpfx Asxqbcxea Njtb VESSEL Max. permissible operating temperature: 204 °C Heads: dished ends (Klöpperboden) Number of feet: 4 pieces HEATING/COOLING JACKET Max. permissible operating underpressure: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manhole / dome: in the top head MATERIAL SPECIFICATION Head material: steel Cylinder material: steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 9.5 mm

Kondisi: bekas, kapasitas tangki: 313 l, 1 Itsdpfexqbbhsx Aa Njb

Kondisi: bekas, kapasitas tangki: 630 l, GENERAL Design: suspended Notes: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: available Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top closure: removable/top-hinged cover Agitator: anchor agitator Stand type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 litres Double jacket volume: 14.5 litres Cylinder wall thickness: 7.8 mm Double jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous use: chemicals VESSEL Max. permissible operating temperature: 300 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole/dome: handhole Outlet: flange DN50 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Itodoxqba Djpfx Aa Nsb AGITATOR 1 Agitator arrangement: centrally mounted in the top cover Agitator equipment: motor/gearbox unit missing Top cover wall thickness: 15.8 mm

Kondisi: bekas, kapasitas tangki: 6.510 l, GENERAL Design: suspended Remarks: Several connections were modified by the previous operator (not listed in TÜV documents); tank sits on 3 lugs made of Fe (not on 4 lugs as shown in the drawing); heating coil for the cylinder only in the lower cylinder section; insulation jacket with sheet metal cutouts and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/cooling: available Insulation: available Power: 5.5 kW Max. permissible operating temperature: 165°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: beam agitator Support type: lugs Location: Bremen Technical documentation: drawing, TÜV certificates Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 liters Double jacket volume: 34.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI 304) Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 1,800 mm Last application: ethanol TANK Max. permissible operating temperature: 165°C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Insulation jacket material: aluminium EQUIPMENT Manhole / dome: on top (DN 600) Outlet: flange DN65 Note: slight residues AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volt Strain relief: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator arrangement: central, in top head Top head wall thickness: 8.0 mm Iedpfjxqbaqex Aa Njtb

Kondisi: bekas, kapasitas tangki: 1.150 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Halar coating on the inside (very good resistance to acids, alkalis, and solvents); no nameplate present; several connections have been modified by the previous operator, including one new outlet welded in place (no coating in the weld area of the bottom or in the new outlet itself; no coating on the manway cover either); 5-legged frame made of Fe (galvanized; one leg slightly bent) Outer diameter: 1,250 mm Inner diameter: 1,100 mm Total width: 1,660 mm Overall height: 2,600 mm Total length: 1,850 mm Heating/cooling: available Insulation: available Max. overpressure: 0.60 bar Top head: bolted cover Agitator: agitator flange Support type: frame Location: Bremen Technical documentation: drawing Ijdpfx Aaoxqbaks Njtb Cylinder temperature control: half-pipe coil Vacuum: 1.00 bar Volume: 1,150 liters Cylinder wall thickness: 4.0 mm Double jacket material: V4A 1.4571 (AISI316) Product-contact material: Halar E-CTFE coating Condition: used Cylindrical height: 870 mm Last application: gasoline VESSEL Max. permissible operating temperature: 120 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation jacket material: aluminum EQUIPMENT Manway / Dome: in the top head (DN 400) Outlet: DN100 flange Note: slight adhesions, dents on the insulation jacket MATERIAL SPECIFICATIONS Head material: AISI316 (V4A) 1.4571 Cylinder material: AISI316 (V4A) 1.4571 TECHNICAL DATA / DIMENSIONS Head wall thickness: 4.0 mm AGITATOR 1 Agitator arrangement: eccentric in top head

Kondisi: bekas, kapasitas tangki: 1.000 l, en Iodpfx Ajxqbadea Nstb

Kondisi: bekas, kapasitas tangki: 2.732 l, 1 Itodpfoxqa U Tjx Aa Nob

Kondisi: bekas, kapasitas tangki: 720 l, GENERAL Equipment: Crane lugs Design: suspended Notes: 3 feet made of Fe; most of the upper head flange bolts are missing Inner diameter: 790 mm Total height: 2,250 mm Heating/Cooling: available Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Top head: bolted lid Agitator: beam agitator Support design: feet Ijdpfx Aaexqa U He Nstb Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 720 liters Jacket volume: 52.0 liters Cylinder wall thickness: 6.2 mm Jacket material: V4A 1.4401 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,220 mm Last use: chemical industry VESSEL Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: available Note: motor/gearbox missing AGITATOR 1 Baffle: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.9 mm Agitator arrangement: centered on top head Top head wall thickness: 8.2 mm

Kondisi: bekas, kapasitas tangki: 3.500 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Armaflex insulation on the lid and upper cylinder area (see photos) Speed: 395 rpm Outer diameter: 1,660 mm Inner diameter: 1,580 mm EX-protected: Motor is Ex-protected (compliance with the applicable ATEX directives under local conditions must be verified) Total height: 4,550 mm Heating/cooling: available Power: 6.8 kW Max. permissible operating temperature: 15°C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 4.00 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Support type: Feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.00 bar Volume: 3,500 liters Double jacket volume: 320.0 liters Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,700 mm Last application: Chemical industry VESSEL Max. permissible operating temperature: 120°C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Double jacket EQUIPMENT Outlet: Flange DN50 Note: slight adhesions MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4541 (AISI304) Feet material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 Volts Agitator arrangement: eccentric in the top cover Agitator equipment: Protective hood over the motor cover is deformed Ijdpsxqa Uysfx Aa Nstb