Beli Lengan Putar Tari bekas (5.984)

Kondisi: bekas, Tahun pembuatan: 1991, Panel kontrol setinggi mata Aigner dengan penghenti integral termasuk feeder dengan kereta dorong (tanpa penggaris penghenti). Penghenti frais dengan indikator digital dan mekanisme swing away. Lokasi penyimpanan: Nattheim. Nodsyi A Tdopfx Alkela

Kondisi: bekas, Tahun pembuatan: 2010, Lengan pengukur mobile / mesin pengukur / alat ukur Produsen: Zett Mess Tipe: AMPG 2400 Precision Nodpfx Aowu E D Rslkjla Tahun pembuatan: 2010 – belum pernah digunakan Ø pengukuran: 2.400 mm

Kondisi: bekas, Tahun pembuatan: 2017, Meja Putar Meja Pembagi Rotary Produsen: Expert Tünkers Tipe: EDX810/0250/8 Tahun pembuatan: 2017 Meja 8 stasiun (langkah 45°) 16426ä Nsdpfxsyl Swwo Alkola

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 500 kg, 3-axis turning and positioning units, available with load capacities of 500, 1000, 2000, or 3000 kg; faceplate diameters of 0.5, 0.65, 0.8, or 1.0 meter. HDL 500: Minimum height: 1000 mm Maximum height: 1500 mm Faceplate diameter: 500 mm Arm reach: 800 mm Rotational speed: 0.1 – 1 rpm Proven in construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. Suitable for welding, assembly, machining, and more. Featuring a stable and robust construction, flexible 3-axis positioning—including overhead operations—and ease of operation, these units significantly facilitate welding, assembly, and handling of large workpieces. Nodpfxoulaxbe Alkjla - Faster production, increased productivity - Optimal workpiece positioning enhances weld quality and allows higher deposition rates - Improved safety: hazardous crane handling significantly reduced - Simultaneous three-axis positioning without complex reclamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular configuration and custom solutions possible Core operating principle: By positioning the arm rotation axis above the clamping plate, the support arm acts as a counterweight to the workpiece. Accordingly, these units are substantially more powerful than tilt-turn tables or tilt-turn positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of the two rotation axes and adjustable height, all workpiece positions—including overhead—are possible. Rotary table speed continuously adjustable: 0.1 – 1.0 rpm (from 2000 kg load capacity: 0.05 – 0.6 rpm) With wireless remote control Rotation range: 360° continuous Tilting range: 360° continuous Stroke: 1000 – 1500 mm, from 2-ton capacity: 1250 – 2000 mm Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 2.000 kg, Perlengkapan: kendali jauh kaki, Meja putar las 3-sumbu, kapasitas angkut 2 ton, kondisi baik termasuk remote control manual (opsional footcontrol) Kemiringan dan kecepatan dapat diatur tanpa langkah 0,05 - 1,0 rpm Diameter piringan penjepit 1,0 meter Tinggi miring ke tengah min. sekitar 0,7 m, posisi horizontal 0,9 m Njdpfsyupgzsx Alksla Tinggi miring ke tengah maks. 1,6 m, posisi horizontal 1,8 m Panjang 2,2 m, lebar 1,35 m

Kondisi: baru, Cantilever rack, new – H: 400 cm, base + 3 storage levels with roof & rear wall Delivery free to your door within Germany, excluding islands Technical data: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever arms: approx. 125 cm - Axle spacing: 290 cm (can be adjusted as per customer requirements) - New product – made in Germany - Delivery time: approx. 6 weeks after commercial clarification - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in a 200 mm grid - Levels: base + 3 storage levels (4 storage levels in total) Rack consists of: - 06 x uprights incl. base, approx. 400 cm, made of IPE 270 - 18 x cantilever arms approx. 125 cm, made of IPE 120 - 06 x roof beams approx. 150 cm, made of IPE 120, roof slope rising 5° - incl. material for roof and rear wall - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities of uprights and arms are statically verifiable at 100% loading - All racking systems are supplied hot-dip galvanized. This allows set-up both indoors and outdoors, and they will not rust like painted systems—consistent appearance for years - We use legally prescribed hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - The upright base and back are welded together for extra safety and reduced assembly time, as there is no need to bolt them together separately - Bracing made from angle steel, eliminating the need for turnbuckles; this reduces installation time - No slotted hole system—no weakening of the upright profile Price: €12,250 net plus statutory VAT. You will receive an invoice with VAT shown separately. Assembly: Our trained staff will gladly assist you with the professional assembly and dismantling of your facility if needed. Our recommendation: Nlodpfxsy Hiu Re Alkja Let us know your requirements... We are happy to support you from planning, ordering, through to assembly.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW equipment immediately available from stock - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized - Cantilever arms are hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) The rack consists of: - 04 x uprights, incl. base, approx. 350 cm made of IPE160 - 12 x cantilever arms, approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are delivered hot-dip galvanized. Therefore, they can be installed indoors or outdoors and do not rust as painted systems do. Consistent appearance for many years. Nlsdpfxjy Hiu Ds Alkoa - We use legally prescribed hot-dip galvanized bolting systems according to DIN EN 15048-1 - Long-term repurchase guarantee - Upright foot and upright back are welded together, providing additional safety and short assembly times as the feet do not need to be bolted separately to the upright back - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, shortening assembly time - No slotted hole system, thus no weakening of the upright profile Price: €2,356.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner shipping company upon request; costs depend on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.

Kondisi: baru, Double-Sided Cantilever Rack, New Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle distance: approx. 131 cm - New stock direct from factory - Double-sided - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 4 storage levels (5 storage levels total) - Delivery time approx. 4 weeks Rack includes: - 15 x double-sided uprights, incl. base, approx. 400 cm made from IPE160 - 120 x cantilever arms, approx. 120 cm, made from IPE80, without deflectors - Includes all necessary connectors and bolts Why BLT cantilever racking? - Certified German manufacturer per DIN EN 1090 – Made in Germany - All specified load capacities of the rack uprights and arms are statically verifiable at 100% load - All racking units are supplied in hot-dip galvanized finish, suitable for both indoor and outdoor installation, and resistant to rusting unlike painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term availability of replacement parts guaranteed - Upright base and back are welded together for extra safety and reduced assembly times (no need to bolt base and back together) - Bracing made from angle steel eliminates the need for turnbuckles, thereby reducing assembly time Nsdpoy Hiukefx Alkela - No slotted hole system, thus no weakening of the upright profile Price: €12,450 net, plus applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our logistics partner upon request. Costs depend on the destination postal code. Assembly: Our trained staff are happy to assist with professional installation and dismantling of your warehouse equipment as needed. Our recommendation: Let us know your requirements... We are happy to help you realize your projects, from planning and ordering to final assembly.

Kondisi: baru, Custom-sized cantilever racking! Ideal for storing your long goods. Easy access to your products thanks to single-sided or double-sided configurations. Modular system allows you to add elements as your storage needs grow. Perfect for offcuts or long goods in metalworking and woodworking operations. Why choose BLT cantilever racking? • Certified German manufacturer according to DIN EN 1090 – Made in Germany • All stated load capacities of uprights and arms are statically tested to withstand 100% loading • All racking systems are supplied hot-dip galvanized—suitable for indoor or outdoor use, and resistant to rust unlike painted systems. Consistent appearance for many years • We use legally required hot-dip galvanized bolt kits according to DIN EN 15048-1 Nlsdpfxsy Hiuds Alksa • We use legally required load signs C4, per DIN EN 15635 / BGR 234 • Long-term availability guarantee for replacement parts • Upright foot and upright spine are welded together for added safety and reduced assembly time—no need to bolt feet separately • Bracing made from angle steel—no tension rods required, which shortens installation time • No slotted hole system—preserves the integrity of the upright profile Transport: Delivery available through our partner freight forwarders on request—costs depend on your postal code Assembly: Our trained staff are available for professional assembly and disassembly of your facility upon request Our recommendation: Let us know your requirements... We are happy to support you in realizing your project—from planning and ordering to installation Interested or have questions? Contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us Monday to Friday, 08:00 - 15:00 Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Kondisi: baru, Tahun pembuatan: 2020, en Nlsdpfx Alsy Hit Tskoa

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 140 kg, tinggi rak: 2.500 mm, panjang total: 3.150 mm, tinggi total: 2.500 mm, jarak gandar: 1.030 mm, kapasitas beban per penyangga: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelves, 60 cm deep, Height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle spacing: 103 cm - NEW stock, available immediately - Load capacity: 140 kg per arm - Load capacity: 1120 kg per upright - Uprights finished in RAL5010 (gentian blue) - Cantilever arms finished in RAL5010 (gentian blue) - Arms are hooked in and secured with safety bolts - Arms adjustable in 70 mm increments - Levels: base + 4 storage levels (5 storage levels in total) Rack consists of: - 04 x uprights, incl. base, approx. 250 cm made of IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and screws -- Available Immediately -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Nsdey Hitmopfx Alkola Transport: Delivery available upon request via our partner freight forwarder. Costs depend on the delivery postcode. Assembly: Our trained staff are available to assist with the professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects, from planning to ordering and installation.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 140 kg, tinggi rak: 2.500 mm, panjang total: 3.150 mm, lebar total: 810 mm, tinggi total: 2.500 mm, jarak gandar: 1.030 mm, kapasitas beban per penyangga: 560 kg, Approx. 3.15 linear meters Cantilever Rack H: 250 cm 140 kg/arm META Multistrong Specifications: - H: approx. 250 cm - D: approx. 81 cm - L: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - BRAND NEW, immediately available from stock. - Load capacity per arm: 140 kg Nljdjy Hitgepfx Alkja - Load capacity per upright: 1120 kg - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking pins. - Arms adjustable in 70 mm increments. - Levels: base + 4 storage levels (5 storage levels total) The rack consists of: - 04 x uprights incl. base, approx. 250 cm, made from IPE120. - 16 x cantilever arms, approx. 60 cm, made from rectangular tube 40 x 30 mm. - Incl. all necessary connecting elements and bolts. -- Immediately Available -- Price: €1,525.00 net €1,814.75 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. are also available from us. Shipping: Delivery can be arranged by our partner forwarding company upon request. Costs depend on postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements ... We are happy to support you with your projects, from planning and ordering to installation.

Kondisi: baru, Tahun pembuatan: 2020, Cantilever Racking – Brand New Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Arm length: approx. 120 cm - Axle spacing: 131 cm - Brand new, available immediately from stock. Nedpsy Hitaefx Alkela - Load capacity: 500 kg per arm - Load capacity: 2,250 kg per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (total 4 storage levels) Racking consists of: - 4 x uprights incl. foot, approx. 416 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE 80 - Includes all necessary connecting elements and bolts. Why BLT Cantilever Racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically verified at 100% load. - All racking systems supplied in hot-dip galvanized finish, suitable for both indoor and outdoor installation, and will not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fasteners per DIN EN 15048-1. - Long-term availability guarantee for spare parts. - Upright base and upright back are welded together for added safety and reduced assembly time, as the base does not need to be bolted separately. - Bracing made from angle steel – no adjustment via turnbuckles required, thus reducing assembly time. - No slotted hole system, so the upright profile is not weakened. Price: €2,578.00 net + statutory VAT. You will receive an invoice showing VAT. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery is available via our partner freight forwarder upon request, costs are based on postal code. Assembly: Our trained staff is available to assist you with the professional assembly and disassembly of your facility as needed. Our Recommendation: Tell us about your requirements... We are happy to support your projects – from planning and ordering to installation.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW immediately available from stock. - Load capacity: 500 kg per arm - Load capacity: 2250 kg per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels in total) Racking system consists of: - 04 x uprights, including base, approx. 300 cm from IPE160 - 12 x cantilever arms, approx. 120 cm from IPE 80 Nlodpfx Aley Hir Nekoa - Including all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities of uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use; unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1. - Long-term repurchase guarantee. - Upright base and upright back are welded together for additional safety and reduced installation times, as feet do not need to be bolted to the upright back. - Bracing made from angle steel, eliminating the need for turnbuckle tensioning. This reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,265.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery available on request by our partner carrier; costs depend on postcode. Assembly: Our trained staff are available to professionally assemble or dismantle your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly.

Kondisi: baru, The double-sided cantilever racking system from BLT, with a height of 315 cm, is ideally suited for the storage of medium-weight long goods such as profiles, pipes, and rods in the warehouse, workshop, or craft business. With an approximate shelf length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack provides clear and easily accessible storage locations for long and bulky goods on both sides. Each cantilever arm can bear up to 500 kg, with each upright carrying up to 1800 kg per side. The bolted cantilever arms with impact guards ensure robust, practical use in everyday operations. Made in Germany – Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with evenly distributed load) - Load per upright: max. 1800 kg per side (without base level, with evenly distributed load) - Levels per side: base + 4 storage levels (5 levels per side in total) - Design: Double-sided, bolted cantilever arms with impact guard - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacture: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3150 mm - 40 × cantilever arms approx. 80 cm long, made from IPE80 Njdpfx Aey Hirpolksla - Incl. fastening materials - Incl. heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design provides usable and easily accessible storage on both sides - Bolted cantilever arms with impact guard - 5 levels per side including base level for optimal use of storage capacity - Up to 500 kg load capacity per arm and up to 1800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany already included Delivery: - Freight within Germany already included - Delivery includes fastening materials - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation service for your bespoke storage solution. Let us know your required dimensions, types of goods to be stored, and available space. Our experienced professional consultants will be happy to provide you with a non-binding offer including tailor-made planning and structural calculation for your custom cantilever rack system. Use our enquiry list or contact us directly by phone. Together, we will plan your bespoke racking solution.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 400 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from warehouse - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 04 x uprights incl. base, approx. 400 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE 80 - Incl. all necessary connectors and bolts Why choose BLT cantilever racking? - Certified German manufacturer to DIN EN 1090 – Made in Germany Nljdpfxjy Hirij Alkja - All stated load capacities for frames and arms are statically verified at 100% load - All racking systems are supplied as hot-dip galvanized units, suitable for indoor and outdoor use without rusting like painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt sets as per DIN EN 15048-1 - Long-term availability guarantee for replacements - Base plates and rear uprights are welded together for added safety and reduced assembly time—bases do not need to be bolted separately - Cross bracing made of angle steel, so no tensioning devices or turnbuckles are necessary, reducing assembly time - No slotted hole system, so the upright profile strength is not compromised Price: €2,462.00 net + statutory VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged upon request by our partner carrier; costs are dependent on postcode. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your workplace equipment if required. Our recommendation: Let us know your requirements... We are happy to assist with your projects, from planning and ordering through to installation.

Kondisi: siap digunakan (bekas), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideally suited for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With a height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly structured and easily accessible storage spaces on both sides. Thanks to 6 storage levels per side, including the base, it offers ample storage space while requiring minimal footprint. Each cantilever arm can support up to 200 kg. Its robust construction ensures reliable performance in everyday operations. Nljdpjy Hircofx Alkoa FREE DELIVERY WITHIN GERMANY IS INCLUDED IN THE PRICE. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Overall height: approx. 2,000 mm - Usable arm depth: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Bay width (upright spacing): approx. 1,250 mm - Load capacity per arm: max. 200 kg (with even load distribution) - Load capacity per upright: max. 1,000 kg (with even load distribution) - Storage levels per side: base + 5 - Specification: double-sided, arms & anti-roll-off stops solidly welded - Colour finish: RAL 7016 (anthracite grey) - Connectors & bracing: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base sections made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, made of RR 50x30x2 mm - Includes all bracing and required bolts - Includes heavy-duty anchors Price: €1,229.00 net incl. delivery. €1,462.51 gross incl. delivery. You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast handling and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our phone number on our company page. We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Kondisi: baru, Tahun pembuatan: 2020, Cantilever Racking NEW Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW stock, immediately available. - 750 kg load capacity per arm - 2250 kg load capacity per column - Columns hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 levels) Rack includes: - 04 x columns including base, approx. 416 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE100 - All necessary connecting elements and bolts included Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities for rack columns and cantilever arms are statically verifiable at 100% load - All racks are supplied hot-dip galvanized, suitable for indoor and outdoor use, no corrosion as with painted systems, maintains appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term spare parts availability Nlsdpfx Aey Hiq Eslkja - Column base and column back are welded together, offering additional safety and reduced installation time, as the bases do not need to be bolted to the column back - Bracing made from angle steel, so no adjustment by turnbuckles is necessary, which reduces assembly time - No slotted hole system, so the column profile is not weakened Price: €2,631.00 net + VAT as applicable You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Our recommendation: Let us know your requirements... We are happy to assist you with your project, from planning and ordering to assembly. Delivery available at attractive rates upon request.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, This single-sided heavy-duty cantilever rack is ideally suited for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden slats, and panel materials. With an overall length of approx. 13.20 m, a height of approx. 4.00 m, and cantilever arms of approx. 120 cm, the rack offers high storage capacity across a total of 4 storage levels (base level + 3 additional levels). Each arm supports up to 500 kg, and each upright can handle up to 2,250 kg. The cantilever arms are bolted and height-adjustable in 200 mm increments thanks to a perforated upright grid. The fully hot-dip galvanized finish ensures long-lasting protection for both indoor and outdoor use – new stock available ex works Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack - Total rack length: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing: approx. 131 cm - Levels: Base level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform load distribution) - Load capacity per upright: max. 2,250 kg (with uniform load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base - Upright perforation grid: approx. 20 cm - First hole above base: approx. 107.5 cm (top of base) - Top hole pair: approx. 50 cm below upright head (top of upright) - Design: single-sided, bolted arms - Surface: fully hot-dip galvanized - Availability: New / Grade 2 (returns) in stock at Wietmarschen SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, incl. base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Includes all connecting elements - Includes all required bolts - 1 x load capacity sign Price: Nodpfxey Hii Ue Alksla €5,660.00 net €6,735.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery in Germany by our partner forwarding agents – freight costs depending on the postal code - Professional installation and removal by trained teams available on request - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide a non-binding offer tailored to your specific requirements. Whether it's new installation, conversion, or expansion – we offer expert advice for your racking configuration. Haven't found the right solution yet? Visit our website for a quick overview of many offers and product versions! INTERESTED OR HAVE QUESTIONS? Contact us via message or phone call. You can find our phone number on our company page. We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, leave us a message with your name and number, and we will get in touch with you as soon as possible.

Kondisi: baru, Machine type: Rotary Dryer Manufacturer: Eurotec Innovation GmbH Nlodef Sqfbepfx Alkja Model: RT27 Year of manufacture: 2026 - New machine Gross volume: approx. 270 liters Usable volume: approx. 140 liters Drive power: approx. 1.6 kW Heating capacity: max. 4 kW Connection: 400V - 16A - 50Hz FIELDS OF APPLICATION: - Component drying immediately after the vibratory finishing process - Polishing of components - Reduction of stains - Fine finishing of particularly intricate contours - Prevention of flash rust through completely dried surfaces - Efficient drying of complex geometries ----- Simply get in touch with us—our team will be happy to advise you, free of charge and without obligation. Europe-wide delivery available! ----- The European Commission provides a platform for online dispute resolution (ODR platform). This offer is solely intended as an online presentation of our products. Contract negotiations are carried out via telecommunications (email, fax, telephone, messaging portal), during which we first submit a non-binding offer. As part of this process, we will also provide information about our general terms and conditions and the right of withdrawal, including company details, before any purchase or contract is concluded.

Kondisi: bekas, jarak tempuh: 500 km, daya: 129 kW (175,39 hp), warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, Tahun pembuatan: 2026, Perlengkapan: ABS, kemudi berkuasa, kunci sentral, pendingin udara,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, Penggerak melalui motor gearbox 0,37 kW Getriebebau-Nord Kecepatan: 1.390 / 13 rpm Nsdpfxow U Tmfj Alkjla

Kondisi: baik (bekas), Execution: • Clamping surface diameter: 400 mm • Overall height: 196 mm Nlodpfey Hdnfex Alkja • 3-jaw chuck, manufacturer: TOS, diameter: 250 mm, in very good condition

Kondisi: baik (bekas), Counterborers, Twist Drills, Drill Bits -Twist Drills: Various sizes available on request Nsdpfx Aljv H D N Rekjla -Different manufacturers -Price: Ø 10 - 30 mm €0.50 per mm (Drill bit Ø 20 mm = €10 net) -Price: Ø 31 - 45 mm €1 per mm (Drill bit Ø 35 mm = €35 net) -Price: Ø 46 - 80 mm €1.60 per mm (Drill bit Ø 50 mm = €80 net) -Two-flute design -Diameter: 10-80 mm -Various lengths -Shanks: MT1 - MT6 -Type: HSS

Kondisi: baik (bekas), jarak tempuh: 767.190 km, daya: 552 kW (750,51 hp), pendaftaran pertama: 08/2015, jenis bahan bakar: diesel, ukuran ban: 385/65R22.5, konfigurasi gandar: 6x2, jarak roda: 4.500 mm, bahan bakar: diesel, rem: retarder, warna: hijau, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: udara, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 13.000 kg, beban gandar yang diizinkan (gandar 3): 7.500 kg, Tahun pembuatan: 2015, Perlengkapan: AdBlue, kunci sentral, pemanas parkir, pendingin udara, retarder, spoiler,