Beli Lms bekas (508)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, berat bal: 600 kg, Perlengkapan: dokumentasi / manual, dixi_80sls_de_1 Ijdpfxsxx Iq Ej Aaheik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, pl-uhlmann-blistermaschine-2024 Iiedpfxsxyk Uvs Aahsk

Kondisi: bekas, jarak tempuh: 784.324 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 10/2014, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, lebar total: 2.550 mm, tinggi total: 4.000 mm, Perlengkapan: ABS, mengalami kecelakaan, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, Suitable for pre-shredded plastic waste (hard plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW Iodoxgq I Nepfx Aahsik

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), de-001 Isdeqbryxspfx Aahjik

Kondisi: baru, Tahun pembuatan: 2026, TOP storage carousel for 3D film rolls Our film storage carousels (Lagerpaternoster) are suitable for storing all types of film rolls. They can be used as high-bay storage by the membrane press or as a space-saving 3D film roll warehouse. With our paternosters, a large quantity of film rolls can be stored in a minimal area of approx. 2.4m x 1.2m (up to 32 rolls with a diameter of 300mm). The required film is available at the push of a button. Our standard paternosters are available in heights from 2.8 meters up to 6.0 meters. Custom solutions are also available; please contact us to find the right storage solution for your requirements. As optional equipment, we offer centering sleeves, manual or automatic cutting devices, and ionization systems. • Hanging rods, Ø 42.4mm to max. 76mm • Side paneling over the entire construction height • Safety mesh from 2.2m above floor level to top edge of the carousel • Load chain as a hollow pin chain, breaking force 100 kN, 50mm pitch = supporting rod suspension grid, circulation speed approx. 5.5 m/min • Operation via key switch with spring return (dead man's control) for up/down movement • Rated voltage 400V; 3N; 50Hz, supply line with CEKON 16A plug, line protection (customer side) 10A slow-blow Ijdpsff Huwjfx Aahoik • Please note: installation requires a stable, level and solid floor—floating screed is not suitable. Minimum floor load capacity 2.4 kg/cm²

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 5.200 mm, tinggi total: 1.700 mm, lebar total: 1.350 mm, berat keseluruhan: 950 kg, Perlengkapan: penghadang cahaya keselamatan, sk_hu_001 Iiodpfx Aexw Ilgjahjk

Kondisi: bekas, Tahun pembuatan: 2015, Pass-through width: 580 mm Pass-through height: 580 mm Air requirement: 400 – 800 l/min Working pressure: 3.4 – 8.0 bar Extraction capacity: 17.4 m³/h Total power requirement: 1.2 kW Iodpfjw Rrcwjx Aahoik Machine weight: approx. 115 kg Space requirement: approx. 1225 x 935 x 1640 mm Description: - Suitable for various blasting media, e.g. quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts, e.g. engine components, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and work safety during processing thanks to the viewing window with applied protective film - Dust-free operation due to continuous seals on lid and door frames - Stable support grid allows for placement of workpieces inside the cabinet - With drain outlet for easy media change - Suction tube for blasting media is fixed to the bottom of the collection tank - With external compressed air connection - Suitable for glass bead abrasive, corundum abrasive, silicon carbide, plastic abrasives, etc. Features: - Very large, upward-opening front flap with gas struts for quick and easy loading/unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow is controlled via foot pedal - Two fluorescent tubes (230 Volt) in a separate housing with protective cover and replaceable protective film, including five spare films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with manometer

Kondisi: bekas, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2016, inspeksi berikutnya (TÜV): 04/2023, volume ruang muat: 51 m³, lebar total: 2.550 mm, tinggi total: 4.000 mm, Perlengkapan: ABS,

Kondisi: bekas, Screw Press REG-MAC for drying films and fibers, and for compacting foam materials (e.g. Styrofoam, EPS) drive motor 55 kW Iiodpfx Aasxgtd Hjhjk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, saluran warna: 6, jumlah kepala cetak: 24, resolusi (maks.): 1.000 DPI (titik per inci), lebar kertas (maks.): 3.200 mm, Printer dalam kondisi sangat baik, hingga beberapa bulan lalu masih dalam kontrak Durst. Konfigurasi CMYK lc lm, printhead dan semua komponen lainnya berfungsi dengan sempurna, hasil cetak sangat baik bahkan pada mode tercepat. Mesin sangat andal dan bekerja dengan baik. Mesin sudah termasuk Rip Grand Caldera. Unit dapat dilihat dan diuji kapan saja. Iiedsxv Dx Hjpfx Aahjk

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 500 kg, tegangan masuk: 400 V, panjang total: 2.500 mm, lebar total: 1.300 mm, tinggi total: 1.600 mm, tinggi tumpukan: 1.200 mm, en-it-1 Iisdoxwnxgjpfx Aahjk

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Baler BTS-MF75 in stock and immediately available The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into bales of up to 75 kg. With a special pressing insert, it is even suitable for compressing individual metal and plastic containers as well as cans. The baler impresses with its simple and safe operation as well as its large loading opening. By compacting these waste materials/recyclables, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure correct reintegration of the material into the recycling process. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (variable) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Feed opening: 700 W x 698 H mm Pressing cycle time: 24 seconds Motor: 1.5 kW, 13 Amp Power supply: 230 V (single phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy bale removal Retaining claws to minimize material spring-back Holder for strapping bands Iijdpsut Tk Hefx Aahok A quality product “Made in Europe” Suitable for compacting: Cardboard Films Cans and light metal containers Plastic canisters and lightweight plastic containers Clothing Light recyclables Available options: Annual maintenance with UVV safety inspection Custom machine finish to RAL colour Can pressing insert PLC control with automatic pressing cycle, bale-ready indicator, and emergency stop with key Strap bale ejector + PLC (replaces bale trolley) Strapping bands Power supply 380–400 V (3-phase) Baler, paper baler, waste paper baler, carton baler, cardboard baler, film baler, paper bale press, waste baler, waste compactor, refuse press, residual waste press

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Offered on behalf of the owner is the following three-piece packaging line, consisting of: + one semi-automatic L-sealer Welding frame: 900 x 700 mm Product conveyor belt Film separator plate Film roll holder for PO and PE films Mobile machine 230 V, 3 m cable Year of manufacture: 2013, manufacturer unknown + one shrink tunnel Passage height: 250 mm Passage width: 500 mm Chamber length: 1,300 mm Rod spacing: 25 mm Three-phase current, 16 A as well as + one product conveyor belt Iodoxq Hcqopfx Aahjik 1,000 x 400 mm Adjustable side guides Harting connector The machine comes from a demonstration showroom and has correspondingly low operating hours. It is therefore in very good overall condition. The machine location is Salzgitter. The total price of €4,750 is ex works, unpacked, plus VAT. The individual components of the line can also be purchased separately. Then the prices – likewise ex works, unpacked, plus VAT – are as follows: L-sealer: €1,650 Shrink tunnel: €2,500 Product conveyor belt: €600

Kondisi: bekas, jarak tempuh: 486.200 km, daya: 330 kW (448,67 hp), pendaftaran pertama: 03/2018, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: hijau, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang ruang muatan: 7.360 mm, lebar ruang muat: 2.470 mm, tinggi ruang muatan: 2.720 mm, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi, tail lift,

Kondisi: bekas, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. A total of four dryers of this model are available. Iiedsxgr Hgspfx Aahok

Tahun pembuatan: 2023, Kondisi: bekas, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in its original packaging and has not been commissioned Features and Technical Data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: Gear motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material via level lowering to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the processing zone - Support width: approx. 200 mm Blockhouse 4F-SERVO (Main Milling Unit): - Processing dimensions: 140 × 200 mm - Horizontal milling depth, top: max. 60 mm - Horizontal milling depth, bottom: max. 35 mm - Vertical milling depth: max. 95 mm - Milling spindles: Ø 30 mm - Milling tools horizontal: 2 × D = 220 mm × W = 120 mm - Milling tools vertical: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical by SERVODRIVE, steplessly adjustable via software - Milling depth adjustment: spindle, digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: Underfloor hopper Ø 160 mm (pit required on site) - Control: IPC / PLC / IITO software - Machine frame prepared for end-groove or dovetail milling unit, boring device and crosscut saw - Machine enclosure: closed, with swing-up safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable duct 3.0 m Option i (Automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended processing capabilities: - Individual grooves and milling on four component sides - Cut-outs and markings for window and door openings - Double and triple joints - Half corner joints (e.g. for upper and lower wall planks) Tools: - 2 × three-part slot cutters D 220 mm, width 21–65 mm, LM - 2 × three-part slot cutters D 280 mm, width 21–65 mm, LM - 1 × end groove cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination Milling Unit End Groove & Dovetail: - 3-axis milling unit for manufacturing end grooves and dovetail joints - End groove cutter Ø 240 mm × width 30 mm Iodoxavtkopfx Aahoik - Max. end groove milling depth: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, steplessly adjustable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamp: vertical pneumatic - Minimum plank thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, steplessly adjustable - Height adjustment (Z-axis): SERVODRIVE, digital counter - Workpiece clamp: vertical pneumatic

Kondisi: bekas, Tahun pembuatan: 1993, Technical Details: Mould plate – Length / Width: 500 x 400 mm Heating: Two-stage heating 4.6 and 6.0 kW Control system: PLC Operating voltage: 380 V (3x 20A) / 24 V DC Working height adjustable: 870 – 970 mm Total power requirement: 6 + 2.5 kW Machine dimensions approx. LxWxH: 2.8 x 1.1 x 1.3 m Weight: 570 kg Compact L-sealer with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL, COOLING STATION AND SPECIAL COOLING FAN Movable/mobile Operation in automatic mode, but also manual operation possible. Fields of application / Products: - Various brochures, plans or other paper/cardboard materials in DIN A5 / DIN A6 Suitable films: all semi-tubular shrink films up to 0.060 mm Sealing system = impulse sealing, with Teflon-coated separation seam, adjustable Automatic product infeed into the shrink tunnel Further information: Iijdpfx Aaou Nu Hiohsk - Tunnel pass-through width: 450 mm - Tunnel pass-through height adjustable to 100, 200, 300 and 400 mm - Length of heated tunnel hood: 900 mm - Machine output depends on product and film: 5 to 20 cycles/min (manufacturer’s spec) - Max. film width (folded semi-tubular): 550 / 550 mm at 25 - 50 μm - Frame dimensions: 500 x 500 x 290 mm = max. packaging size Heating: - Two-stage heating 4.6 and 6.0 kW - Fan speed continuously adjustable Cooling station: - Discharge 300 mm - with fan Conveyor: - Feed rate 2.5 – 12 m/min - Continuously adjustable in operation.

Kondisi: bekas, jarak tempuh: 486.200 km, daya: 330 kW (448,67 hp), pendaftaran pertama: 03/2018, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: hijau, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang ruang muatan: 7.360 mm, lebar ruang muat: 2.470 mm, tinggi ruang muatan: 2.720 mm, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi, tail lift,

Kondisi: bekas, The HERBOLD Plastcompactor is a system for agglomerating films, fibers, shavings, dust, and flakes. Low-flowability waste is transformed into agglomerate with high bulk density and excellent flow properties, making it suitable for direct feeding into extruders and injection molding machines. Iijdpfx Asxgtx Deahok The plant offered for sale is equipped with a main drive motor rated at 110 kW and achieves a throughput of 600 to 2,000 kg/h, depending on feedstock. All thermoplastic plastics can be processed, including sensitive materials such as PET, PA, and bioplastics, which can be agglomerated without thermal damage or discoloration. The system comprises a feed device with silo, the compactor itself, a downstream granulator with screening unit, and fine material recirculation. Optionally, a pre-shredding unit tailored to your requirements can be offered. Trials for suitability and sampling can be conducted at our in-house technical center. As the manufacturer of this equipment, we provide full service and spare parts support. The plant is available at short notice!

Kondisi: bekas, Manufacturer: Leomotor A/S Type: KC 218B159 - LM 2000 - 12630 Iedpfxedc A Rne Aahoik

Kondisi: bekas, The plant is suitable for the agglomeration of thermoplastic films and fibers. Throughput varies depending on the material and ranges from 500 kg to 1,000 kg/h. The plant consists of: • Feed conveyor • Load-dependent control for the feed conveyor • Metal detector coil • HERBOLD granulator type SMS 45/100-H5-3 • Pneumatic material conveyance to the storage silo • Plastcompactor unit HV-70, consisting of storage silo screw conveyor, plastcompactor, central blower, and cooling circuit • HERBOLD secondary granulator type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Fines recirculation to the compactor silo Iiodjxgtqmjpfx Aahok • Material conveying system type MFT with Big-Bag station and automatic diverter valve to the on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Kondisi: bekas, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. A total of four dryers of this model are available. Iiedpfsxgttzex Aahjk

Kondisi: bekas, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. A total of four dryers of this model are available. Iedpfxexgtrwo Aaheik

Kondisi: bekas,