Beli Mafell Erika 85 Ec bekas (10)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, MAFELL Erika table saw with side-adjustable fence Ffjdpfx Asud At Rsbheu

Kondisi: bekas, Exhibition machine Description: The new Zimmerei chainsaw ZSX-TWIN Ec is a practical, solution-oriented tool for processing large wooden structural components. With the development of the twin-motor chainsaw, MAFELL has established a new standard, enabling tasks that were previously almost impossible or time-consuming to be accomplished effortlessly and with precision. With a rated output of 3,000 watts, a single CUprex motor already pushes a 230 V power supply to its performance limit. Operating two CUprex motors simultaneously would overload any single-phase standard power network. By distributing the load across two separate circuits, the twin-motor ZSX receives the power it requires. This is precisely what is offered by a three-phase power supply, where individual phases are protected separately, preventing overloading of the entire system. Benefits: Thanks to the use of single-phase technology, the ZSX TWIN weighs only 20 kg at a rated output of 6,000 watts. This allows for longitudinal cuts up to a cutting depth of 400 mm! In timber construction and for processing solid timber wall elements, corner notches are frequently required. The vertically positioned cutting tool allows for notches and lap joints to be made quickly and precisely. Laborious turning of the workpieces is no longer necessary. The core of the ZSX-TWIN Ec is its two 3,000-watt single-phase motors, which run in parallel on two separate 230 V phases from the three-phase network. The ZSX can be tilted precisely from -15° to 60° based on the scale. Application range: - Rip and cross cuts - Notches Suitable materials, e.g.: - Solid timber - Glued laminated timber Technical specifications: - Maximum cutting depth: 400 mm - Cutting depth at 15°: 386 mm - Cutting depth at 30°: 346 mm - Cutting depth at 45°: 282 mm - Cutting depth at 60°: 199 mm - Tilting both sides: -15° to +60° - Kerf width: 6.8 mm - Rated idle speed: 21,000 rpm - Rated power input: 2 x 3,000 W Ffedpfsvwfy Sex Abhou - Weight: 20.0 kg Scope of delivery: - 1 ZSX TWIN Ec chainsaw - 1 TWIN HM 400 rip chain, Art. no.: 006977 - 1 Fine cut chain HM 400, Art. no.: 006972 - 1 ZSX-Twin Ec transport trolley, Art. no.: 205940 - 1 Guide shoe for use with guide rails, Art. no.: 205934 - 1 Parallel fence, Art. no.: 204591 - 1 Combination screwdriver 6 mm, Art. no.: 093272 - 1 Open-ended spanner 13 mm, Art. no.: 093008 - 1 Power cable, 10 m, complete with 400 V CEE plug, Art. no.: 087906

Kondisi: bekas, Tahun pembuatan: 2017, termasuk 3 mata gergaji HM bekas, kondisi sangat baik, sedikit digunakan Merek: Mafell Tipe: MKS 130 EC Tahun pembuatan: 2017 No. mesin: 122338 Sertifikat CE Motor 2,5 kW Fjdpfxoyclxcj Abhefu Motor rem Tinggi potong 130 mm Diameter mata pisau 330 mm Lokasi stok: 97447 Gerolzhofen, dimuat bebas, tanpa kemasan Penyerahan dalam kondisi aktual seperti dilihat, tanpa garansi atau jaminan apa pun

Kondisi: baru, Machine weight approx. 392 kg Clearance sale of display model – new, immediately available! Description: With the ZAF 250, all tenon shapes can be produced quickly, precisely, efficiently and with perfect fit. Straight tenons, angled tenons, corner and ridge joints – with the compact ZAF 250, you are always on the safe side. An exact longitudinal scale can be set via the adjustable stop. The milling tool, developed specifically for the ZAF 250, can be rapidly adjusted for various tenon lengths as well as for joint milling. The ZAF 250 Vario features precise adjustment options and a clearly laid-out control panel. A built-in laser assists with the accurate positioning of the timber. Result: millimetre-precise milling in any type of wood! After configuring the tenon geometry, the milling head automatically machines the tenon profile and delivers the desired tenon – end-notching, shouldering, and chamfering included. The ZAF 250 Vario comes with adjustable feed speed for hardwood operations. Application areas: Tenon and joint milling up to 60° Material types e.g.: solid wood and glued laminated timber Technical data: Maximum wood dimension (W x H) 90°: 500 x 250 mm Ffsdpfx Absvwgfvehsu Maximum wood dimension (W x H) 60°: 220 x 250 mm Table length with scale: 3,000 mm Feed speed: 0.9 – 2.2 m/min Footprint: 1.5 x 4 m Rated no-load speed: 6,670 rpm Rated power input: 6,000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Scope of delivery: 1x Tenon Milling Machine ZAF 250 Vario

Kondisi: baru, Technical Specifications: Rated voltage: 230 V Rated input: 3050 W Edge height: 10 - 65 mm Swivel range: 0 - 50° Edge thickness: 0.4 - 3.0 mm Heat-up time: 30 s Maximum temperature: 520°C Ffedpfowi Nt Esx Abhou Stepless feed rate: 1 - 5.5 m/min Dimensions (L x W x H): 220 x 160 x 360 mm Compressed air connection: 6 - 10 bar Minimum inner radius: 10 mm Weight: 10.8 kg

Kondisi: bekas, bekas, kondisi prima, sangat jarang digunakan Ffedpfsycxhkjx Abhou Merek Mafell Tipe MKS 165 E CE bersertifikat Motor 2,7 kW Motor dengan rem Tinggi potong 165 mm Diameter mata pisau 410 mm Harga baru sekitar €4.000,00 Lokasi gudang: 97447 Gerolzhofen, bebas dimuat, tanpa kemasan Penyerahan dalam kondisi apa adanya seperti yang dilihat, tanpa jaminan atau garansi.

Kondisi: baik (bekas), Mafell ZAF 160 Tenoning Machine – Professional Tenoning Machine For sale is a Mafell ZAF 160 tenoning machine, ideal for carpentry workshops, timber construction, and restoration businesses. This machine allows for highly precise tenon joints, even with large timber cross-sections and angled machining operations. Fodpex D Az Nsfx Abhofu Technical Data Maximum Timber Dimensions: - Right-angled: 320 × 160 mm - Tenoning at 60° incline: 160 × 160 mm - Flattening (ridge joint/corner joint, etc.), right-angled and up to 45° incline: 230 × 160 mm - Clamping the workpiece: manual - Tenon size adjustment: manual via scale - Variable tenon length: up to 110 mm - Flattening in a single pass: max. 110 mm - Flattening width: max. 160 mm - Working height: 750 mm - Support with scale (length stop): 3 m Motor: - Three-phase 400 V / 50–60 Hz - Power input: 6000 W - Output power (rated load): 4500 W - Cutter head speed: 6670 rpm - Cutting speed: 32.8 m/s - Feed speed: approx. 2.2 m/min Tool Dimensions: - 100 × 110 mm, carbide - 165 × 40 mm, carbide + carbide fibre knives Extraction: - Connection: 2 × 100 mm diameter Space requirement: approx. 400 × 140 cm Weight: approx. 380 kg You will receive an invoice with VAT shown separately. Price: €10,500 net

Jam operasional: 7 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Compact stationary system for producing invisible joints – seamless finish as if made from a single piece Ffodpfx Absd St R Sohju An optional worktable is available - Heat-up time:

Kondisi: siap digunakan (bekas), Caractéristiques techniques Ffedpfxjt Dgape Abhju Puissance et moteurs Dimensions hors tout Poids : 9 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, daya: 6 kW (8,16 hp), Mafell ZAF 250 demonstration machine (used max. 2-3 times for demonstration purposes) Item no.: 991201 Scope of delivery: - 1 milling head, complete with reversible blades; Order no. 202105 - 1 support table, Order no. 205025 Maximum timber dimensions (W x H) 90°: 500 x 250 mm Maximum timber dimensions (W x H) 60°: 220 x 250 mm Support length with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Ffedpfx Aowazn Aebheu Rated power input: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: - With the ZAF 250 Vario, all types of tenons can be produced quickly, precisely, efficiently and accurately. - Straight tenons, angled tenons, corner and ridge joints – with the compact ZAF 250 Vario you are on the safe side. - An exact length scale can be adjusted via the stop. - The milling tool specially developed for the ZAF 250 can be reconfigured in seconds for different tenon lengths and for housing joint milling. - The ZAF 250 Vario features precise adjustment options and a clearly arranged control panel. An integrated laser ensures exact timber positioning. The result: millimetre-accurate milling in any wood! - After adjusting the tenon geometry, the milling head automatically contours the tenon and produces the desired joint – includes shoulder, offset and chamfer operations. - The ZAF 250 Vario offers adjustable feed speed for use with hardwoods. Application area: - Tenon and housing joint milling up to 60° - Materials, e.g.: solid wood and glulam Advantages: - Significant time savings – thanks to simple and rapid adjustment of length, angle, and tenon dimensions. - Maximum timber dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. - Minimal space requirement – the swivelling head keeps the workpiece in the same position at all times. - No offcuts – fully extractable dust collection system.