Beli Maka Hc 57 R bekas (49)

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Used Machine MAKA PM 270 R 5-Axis CNC Machining Centre for processing wood, plastic, and aluminium. Machine in gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Lhedpevmywqsfx Agljb Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) Working areas in 3-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse rate: X/Y-axis 45 m/min; Z-axis 24 m/min; A/B-axis 10 m/min Milling unit: - 1 universal unit for 5-axis milling with a 50° inclined head, maximum power 12.5 kW, infinitely variable speed up to 17,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm. With sorted placement, max. up to 160 mm (occupies three positions). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 control circuits for stop "raise/lower" - 2 control circuits for sliding rail "raise/lower" - 2 control circuits for pneumatic "clamping/release" - 2 vacuum control circuits with push button for clamping, automatic reset via CNC programming - 1 chip conveyor integrated in the base frame for removal of chips and small offcuts up to approx. max. 100 x 100 x 100 mm Tools: Tools are not included in the scope of delivery! The system can also be supplied with various tool holders upon agreement. We are happy to prepare a separate offer for this. Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 litres capacity for rapid vacuum build-up - 10 vacuum supports with various suction plates - Various clamping fixtures for posts and steam-bent parts - Stops raising/lowering for component positioning Miscellaneous: - Automatic central lubrication - Control cabinet with air conditioning unit - Projection laser Occupational safety: - Moving safety cabin with safety bumpers on the operator side.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, EN_Gebrauchtmaschine_MAKA_FPM_470R_2024-06-14 Lhsdpevmpx Refx Aglsb

Kondisi: bekas, Tahun pembuatan: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 Door processing center for the machining of interior doors (hardware routing, vision panels, peephole milling, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working areas: for door width: 250 – 1,280 mm for door height: max. 2,500 mm Lhjdpfov S Dn Dsx Aglsb for door leaf thickness: max. 80 mm Rapid traverse speeds: X / Y axis: 45 m/min. Z axis: 10 m/min. 1 universal milling unit SK40 with integrated A-tilting axis 190° (+/- 95°), along the X-axis for lock / hinge processing on both sides along the longitudinal edge of the doors directly with the unit. Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, tool holder SK40 for automatic tool changer. 1 chain tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, arranged at the unit’s home position. Maximum tool length 200 mm from spindle clamp. Milling spindle and 2 magazine positions prepared for the reception of angle or feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for processing with edge bander to ensure consistent mortising depth on both sides. 1 set infeed rollers for manual loading, automatically raiseable and lowerable. 1 longitudinal stop with pneumatic insertion stroke, mounted traveling with the unit, for positioning according to door length and thickness. 4 pneumatic stops, laterally swing-in, for doors with veneer/overlay up to max. 15 mm, also selectable height adjustment for varying stop heights for finished doors (single/double rebate doors). 2 vacuum clamping lines, each line with 5 vacuum pods, 130 / 200 x 70 mm, with sensing valve and blow-off device. 3 pods per line lowerable according to door height. 1 vacuum pump approx. 128 m³/h suction capacity, with 250 liter intermediate tank, for fast vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioning unit. Occupational safety: bumpers on both sides of the moving gantry, side safety fence. Various tools and tool holders may be taken over upon agreement. The machine can be inspected in Hermaringen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995,

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining centre for 5-axis machining, ideal for aluminium processing and mould making. • MAKA ECM 27 R in gantry design. • Equipped with automatic central lubrication and electrical cabinet with climate control unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable operator panel BWO RC 910. Technical specifications: Working ranges / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 milling spindle, 11 kW, Infinitely variable speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angle drilling heads (fixed-position coded), SK40. 1 steel table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m³/h, with 250-litre tank. 1 vacuum clamping circuit. Occupational safety: With protective enclosure at the rear of the machine, side access door; the enclosure is open at the top. Slat curtain on the operator side and safety bumper on the front of the table. Repairs / Overhauls before delivery: - Maintenance Electrical requirements: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Installation of an RCD (residual current device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders or machining tools are included in the scope of delivery. Ljdpfx Ast Dl U Ejglehb Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, on request Ledefxgmgspfx Agljhb

Kondisi: sangat baik (bekas), Motor power 2.02 kW Pneumatic clamps Pneumatic depth adjustment Shoulder length 220 cm Working depth 16 cm Lsdpfxsh Im S Nj Aglshb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, de Lhedpfxsxwux Ts Aglsb

Tahun pembuatan: 1990, Kondisi: baik (bekas), I'm selling a door manufacturing machine MAKA Year of manufacture: 1990 Combined oscillating slot drilling and drilling machine. Lhsdpfx Agegiwl Djleb Available for immediate sale.

Tahun pembuatan: 1997, Kondisi: perlu perbaikan (bekas), Mortaismaschine Maka Db-6 V Gebraucht 1977 Hersteller: Maka Modell: Db-6 V Beschreibung: VERTIKALE SCHLITZMASCHINE MAKA DB-6 V Baujahr: 1977 Maschinenzustand: sehr gut nach Generalüberholung Angebotsart: Gebrauchtmaschinenangebot Lhjdpfx Ajfd Rxqoglsb Standort: Polen Technische Daten: NACH REPARATUREN SEHR WICHTIG, VERTIKAL Baujahr: 1977

Kondisi: bekas, Tahun pembuatan: 1999, Used Machine MAKA KPF 334 RT 5-Axis CNC Machining Center Year of manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for processing deep-drawn components. Compact design with control cabinet integrated into the machine base. Equipped with automatic central lubrication and control cabinet with air-conditioning unit. Design / Version: Gantry-type machine with 2 aluminum tables Axis Data: Axis: Size / Travel / Speed X-axis: 2,750 mm / 40 m/min Y-/V-axis: 2,400 mm / 40 m/min Z-axis: 700 mm / 15 m/min Rotary axis: 540° / 10,000°/min Swivel axis: 200° / 10,000°/min Machine Connection: Voltage: 400 V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35°C Compressed air pressure: 6 bar Work areas / Workpiece envelope: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm Specifications based on a fixture height of 170 mm / tool length of 60 mm. 1 Equipment 1.1 Table Version 2 aluminum surface tables with threaded inserts for clamping, each 1,000 x 1,000 mm. Tables can be coupled for machining large components. Both tables include additional threaded inserts and locating bushes (or dowel pins) for acceptance of customer-supplied milling fixtures, as specified. 1.2 Vacuum System Machine equipped with vacuum system. 1 vacuum pump 1.3 Clamping System 1 vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Quick-release couplings mounted on the machine table. 1.4 Milling Unit: 1 DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (continuously variable speed), air-cooled. A-axis 540° (rotary axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis Drives Ball screw drives on X / Y / Z-axes; A / B axes with hollow shaft drives. 1.6 Safety Features 1 automatic sliding door per table. Includes safety enclosure. 1.7 Control System 1 machine control BWO 900 with 1 BWO 900C operating unit, mounted on a mobile operator console. 1.8 Mains Voltage Machine is equipped for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz Use of RCDs in the machine power supply is not permitted. 1.9 Country Specification Technical machine documentation in German. Consisting of: Ljdpfx Agsv S Ut Delehb - Operator manual for the machine - Operator manual for the control system - Electrical and pneumatic schematics - Control language in German.

Kondisi: baik (bekas), Tahun pembuatan: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact construction with control cabinet integrated into the machine base. CNC control BWO 900C, 1 MB memory, integrated PC. Technical data: Working ranges / working envelope: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm, with fixture height of 120 mm A-axis: 540° B-axis: 200° (+/- 100°) Lodpfx Agsir Aq Tsljhb Rapid traverse speed: X/Y-axis: 45 m/min. Z-axis: 15 m/min. A/B-axis: 10,000°/min. 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed from 2,000 to 24,000 rpm, rated power from 12,000 rpm onwards. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 travelling drum-type tool magazine for 10 tools up to 60 mm diameter and - depending on tool diameter - up to 130 mm length from zero reference. Aluminium worktable 1,000 x 1,000 mm with matrix drilling pattern 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioning unit. Workplace safety: Sliding door for front loading, safety enclosure for the rear of the machine, with side access door, enclosure open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (residual-current device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 21003600, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 650 mm, model controller: BWO 910, jam operasional spindle: 200 h, EN-001 Lhedpfxjv Hnn Do Aglsb

Kondisi: bekas, Tahun pembuatan: 1973, Lokasi gudang: Nattheim Lhsdpfxovvkt Uo Agljb

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Lhedpfx Agew I Uinsljb Tahun pembuatan: 1993 Perlengkapan dan data teknis: - Spindel frais tetap; bantalan baru - Dengan perpanjangan meja dan penyangga rangka tarik 2500 mm - Motor 5,5 kW - Kecepatan 3000/4500/6000/8000/10000 rpm - Penghenti frais dengan 2 pengaturan: - penghenti penuh - rahang pelepas belakang - Hood penghisap: 2 x 120 mm - Rem motor otomatis - Putaran kanan-kiri - Dengan feeder Haffner 4 rol Berat sekitar 700 kg Ketersediaan: sesuai kesepakatan Lokasi: Flörsheim

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Putaran kiri-kanan, 3-1000 rpm, motor rem dengan sistem feeder 3 rol Haffner, 8 kecepatan, kondisi baik. Pengiriman bisa dilakukan dengan biaya tambahan! Lhsdpfx Ageybv A Ajleb

Kondisi: sangat baik (bekas), Nomor katalog 7266 DATA TEKNIS - Lebar poros: 530 mm - Poros 4 pisau - Sisir peredam suara - Pelindung poros - Panjang meja: 2900 mm - Meja masuk lebih panjang: 1655 mm - Meja dari besi cor - Kedua meja dapat diatur - Pemandu asli dari besi cor, dapat disetel - Rem - Diameter saluran ekstraksi: 140 mm - Motor: 4 kW - Dimensi (P/L/T): 2900x1000x1210 mm - Berat: 695 kg KEUNGGULAN – Produksi Jerman – Poros 4 pisau – Rem – Sisir peredam suara – Meja masuk lebih panjang – Tidak dicat ulang – Mesin jointer bekas, kondisi sangat baik Lsdpfox Symbex Agljhb Foto asli Video pengoperasian mesin: youtube.com/watch?v=v_3ECkLDWVI Harga netto: 18.900 PLN Harga netto: 4.500 EUR tergantung kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi nilai tukar yang signifikan)

Kondisi: bekas, Three-phase motor, electric motor, milling motor Maka - Power: 1.3 kW - Speed: 2800 rpm - Shaft: Ø 18 x 40 mm - Design: with dovetail guide Lhodpfx Agsdwhuqsljb - Dimensions: 330/135/H195 mm - Weight: 15.7 kg

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2005, jam operasional: 52.751 h, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 975 mm, jarak lintasan sumbu Y: 9.100 mm, jarak gerak sumbu Z: 575 mm, daya nominal (semu): 12 kVA, produsen pengendali: BWO, model controller: CNC 920, panjang benda kerja (maks.): 8.500 mm, lebar benda kerja (maks.): 450 mm, tinggi benda kerja (maks.): 225 mm, kecepatan rotasi (min.): 1.000 rpm, kecepatan rotasi (maks.): 20.000 rpm, berat keseluruhan: 16.600 kg, jumlah spindel: 1, jumlah slot dalam magazin alat: 32, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, tekanan operasi terus-menerus: 6 batang, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry incl. unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage 400 V / 50 Hz Operating pressure 6 bar Compressed air consumption approx. 2,000 l/h (uncompressed) Control type: BWO CNC 920 Controlled axes + max. travel distances approx.: X - 975 / Y - 9100 / Z - 575 / A - ±270° / B - ±98° Spindle motor: HSK 63F / 12 kW from 12,000 rpm, speed range 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 slots / 160mm Machine table: 2 clamping stations with 6 support beams with clamping / pneumatic clamping devices Workpiece cube dimension: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - ±270° / B - ±98° Currently, the machine is not operational. The spindle including a conversion kit for the latest software needs to be replaced (can be requested through Maka). The machine can be inspected under power in DE94424 Arnstorf by appointment. Lhedpfx Asv Rlpyjglsb All information is provided without guarantee, sale to commercial customers only. Inspection and collection by arrangement in 94424 Arnstorf (Germany).

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 21017403, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 5.900 mm, jarak gerak sumbu Z: 250 mm, produsen pengendali: BWO 900C, berat benda kerja (maks.): 8.000 kg, kecepatan rotasi (min.): 1.000 rpm, kecepatan rotasi (maks.): 17.000 rpm, berat keseluruhan: 8.000 kg, daya motor spindle: 12.500 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 32, diameter pemasangan: 90 mm, diameter alat: 160 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, The machine is fully operational and currently in use; it will be available no earlier than 01.11.2024. The vacuum pump, central lubrication system, tool magazine, and spindle have all been serviced and overhauled. The machine is connected to the power network, allowing for inspection and testing on site. Additionally, the machine comes equipped with software featuring a post-processor for stair production and a laser projector. Training can also be provided if required. Lhsdpfxjuyl Nps Aglob

Kondisi: baik (bekas), Tahun pembuatan: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for Wood and Plastic Processing. Gantry-style machine with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC control BWO 920 for 5-axis machining. 10.4" LCD display 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) Lhodpfjvr A A Tox Aglsb Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y-axis 45 m/min. Z-axis 24 m/min. A-/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power: 7.5 kW (S1), 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine with 20 slots for tools up to D = 90 mm; with sorted placement up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic quick-release system for rapid positioning. - 2 control circuits for stops “raise/lower” - 2 control circuits for sliding rail “raise/lower” - 2 control circuits for pneumatic “clamp/release” - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 integrated chip conveyor in the base frame for extraction of chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine equipped with vacuum system. - 2 vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir. - Vacuum supports with various suction pads. Miscellaneous: - Automatic central lubrication. - Switch cabinet with air conditioning unit. Occupational safety: - Moving safety enclosure with safety bumpers on operator side. Repairs / maintenance before delivery: - Maintenance newly performed. - Lamella curtain on portal new - Sliding window new - Y-axis energy chain new - Z-axis energy chain new - Various cables and air hoses renewed.

Kondisi: diremaj di bengkel (bekas), Mortising Machine, Oscillating Chisel Mortising Machine MAKA Type DB 5 with numerous mortising tools, see photos Workpiece stop, 2 pieces Lsdpfjv Hm Nmjx Agljhb Stop rail right / left, 2150 mm Workpiece ejection, 2x Foot pedal Pneumatic side workpiece clamping, 1 piece Pneumatic top workpiece clamping, 2 pieces Extraction connection, Ø 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical data subject to change without notice and prior sale reserved. • Prices shown are ex-works, loaded free on truck! • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Kondisi: bekas, MAKA feed unit - used - Lhjdpfx Asu R S R Uegljb infinitely variable feed speed ----- Technical data ----- Rollers: 3 units

Kondisi: siap digunakan (bekas), 1.5 kW motor, 2 clamping units. Bore depth: 13 cm. Bore width: 20 cm. Bore height: 15 cm. Lodjt D Evpjpfx Agljhb

Kondisi: bekas, Mesin planer tipe AH 430 Lodpfx Aox Htb Ijglohb - Tahun pembuatan: 1992 - 3 kW - 380 Volt - Panel kontrol di atas - Panjang meja keseluruhan: 2750 mm - Lebar pemotongan: 430 mm - Poros pisau Tersa 4 bilah - Penyesuaian meja dengan roda tangan - Rem motor - Kap hisap serbuk - Dimensi keseluruhan: 2800 x 600 mm