Beli Maka Hc 57 R bekas (45)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, on request Ledpfxefxgmgj Afisaa

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Used Machine MAKA PM 270 R 5-Axis CNC Machining Centre for processing wood, plastic, and aluminium. Machine in gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) Working areas in 3-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse rate: X/Y-axis 45 m/min; Z-axis 24 m/min; A/B-axis 10 m/min Milling unit: - 1 universal unit for 5-axis milling with a 50° inclined head, maximum power 12.5 kW, infinitely variable speed up to 17,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm. With sorted placement, max. up to 160 mm (occupies three positions). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 control circuits for stop "raise/lower" - 2 control circuits for sliding rail "raise/lower" - 2 control circuits for pneumatic "clamping/release" - 2 vacuum control circuits with push button for clamping, automatic reset via CNC programming Lajdpovmywqefx Afija - 1 chip conveyor integrated in the base frame for removal of chips and small offcuts up to approx. max. 100 x 100 x 100 mm Tools: Tools are not included in the scope of delivery! The system can also be supplied with various tool holders upon agreement. We are happy to prepare a separate offer for this. Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 litres capacity for rapid vacuum build-up - 10 vacuum supports with various suction plates - Various clamping fixtures for posts and steam-bent parts - Stops raising/lowering for component positioning Miscellaneous: - Automatic central lubrication - Control cabinet with air conditioning unit - Projection laser Occupational safety: - Moving safety cabin with safety bumpers on the operator side.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, EN_Gebrauchtmaschine_MAKA_FPM_470R_2024-06-14 Lajdpfxovmpx Ro Afiea

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining centre for 5-axis machining, ideal for aluminium processing and mould making. • MAKA ECM 27 R in gantry design. • Equipped with automatic central lubrication and electrical cabinet with climate control unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable operator panel BWO RC 910. Technical specifications: Working ranges / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 3,000 mm Lajdpfx Ast Dl U Ejfija Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 milling spindle, 11 kW, Infinitely variable speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angle drilling heads (fixed-position coded), SK40. 1 steel table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m³/h, with 250-litre tank. 1 vacuum clamping circuit. Occupational safety: With protective enclosure at the rear of the machine, side access door; the enclosure is open at the top. Slat curtain on the operator side and safety bumper on the front of the table. Repairs / Overhauls before delivery: - Maintenance Electrical requirements: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Installation of an RCD (residual current device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!

Kondisi: bekas, Tahun pembuatan: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 Door processing center for the machining of interior doors (hardware routing, vision panels, peephole milling, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working areas: for door width: 250 – 1,280 mm for door height: max. 2,500 mm for door leaf thickness: max. 80 mm Ledpev S Dn Djfx Afioaa Rapid traverse speeds: X / Y axis: 45 m/min. Z axis: 10 m/min. 1 universal milling unit SK40 with integrated A-tilting axis 190° (+/- 95°), along the X-axis for lock / hinge processing on both sides along the longitudinal edge of the doors directly with the unit. Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, tool holder SK40 for automatic tool changer. 1 chain tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, arranged at the unit’s home position. Maximum tool length 200 mm from spindle clamp. Milling spindle and 2 magazine positions prepared for the reception of angle or feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for processing with edge bander to ensure consistent mortising depth on both sides. 1 set infeed rollers for manual loading, automatically raiseable and lowerable. 1 longitudinal stop with pneumatic insertion stroke, mounted traveling with the unit, for positioning according to door length and thickness. 4 pneumatic stops, laterally swing-in, for doors with veneer/overlay up to max. 15 mm, also selectable height adjustment for varying stop heights for finished doors (single/double rebate doors). 2 vacuum clamping lines, each line with 5 vacuum pods, 130 / 200 x 70 mm, with sensing valve and blow-off device. 3 pods per line lowerable according to door height. 1 vacuum pump approx. 128 m³/h suction capacity, with 250 liter intermediate tank, for fast vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioning unit. Occupational safety: bumpers on both sides of the moving gantry, side safety fence. Various tools and tool holders may be taken over upon agreement. The machine can be inspected in Hermaringen.

Kondisi: sangat baik (bekas), Motor power 2.02 kW Pneumatic clamps Pneumatic depth adjustment Laedpfx Afsh Im S Nsija Shoulder length 220 cm Working depth 16 cm

Tahun pembuatan: 1990, Kondisi: baik (bekas), I'm selling a door manufacturing machine MAKA Year of manufacture: 1990 Lasdegiwl Depfx Afija Combined oscillating slot drilling and drilling machine. Available for immediate sale.

Tahun pembuatan: 1997, Kondisi: perlu perbaikan (bekas), Mortaismaschine Maka Db-6 V Gebraucht 1977 Ljdpfxsfd Rxqj Afisaa Hersteller: Maka Modell: Db-6 V Beschreibung: VERTIKALE SCHLITZMASCHINE MAKA DB-6 V Baujahr: 1977 Maschinenzustand: sehr gut nach Generalüberholung Angebotsart: Gebrauchtmaschinenangebot Standort: Polen Technische Daten: NACH REPARATUREN SEHR WICHTIG, VERTIKAL Baujahr: 1977

Kondisi: bekas, Tahun pembuatan: 1999, Used Machine MAKA KPF 334 RT Lasdpfx Afjv S Ut Dsija 5-Axis CNC Machining Center Year of manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for processing deep-drawn components. Compact design with control cabinet integrated into the machine base. Equipped with automatic central lubrication and control cabinet with air-conditioning unit. Design / Version: Gantry-type machine with 2 aluminum tables Axis Data: Axis: Size / Travel / Speed X-axis: 2,750 mm / 40 m/min Y-/V-axis: 2,400 mm / 40 m/min Z-axis: 700 mm / 15 m/min Rotary axis: 540° / 10,000°/min Swivel axis: 200° / 10,000°/min Machine Connection: Voltage: 400 V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35°C Compressed air pressure: 6 bar Work areas / Workpiece envelope: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm Specifications based on a fixture height of 170 mm / tool length of 60 mm. 1 Equipment 1.1 Table Version 2 aluminum surface tables with threaded inserts for clamping, each 1,000 x 1,000 mm. Tables can be coupled for machining large components. Both tables include additional threaded inserts and locating bushes (or dowel pins) for acceptance of customer-supplied milling fixtures, as specified. 1.2 Vacuum System Machine equipped with vacuum system. 1 vacuum pump 1.3 Clamping System 1 vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Quick-release couplings mounted on the machine table. 1.4 Milling Unit: 1 DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (continuously variable speed), air-cooled. A-axis 540° (rotary axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis Drives Ball screw drives on X / Y / Z-axes; A / B axes with hollow shaft drives. 1.6 Safety Features 1 automatic sliding door per table. Includes safety enclosure. 1.7 Control System 1 machine control BWO 900 with 1 BWO 900C operating unit, mounted on a mobile operator console. 1.8 Mains Voltage Machine is equipped for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz Use of RCDs in the machine power supply is not permitted. 1.9 Country Specification Technical machine documentation in German. Consisting of: - Operator manual for the machine - Operator manual for the control system - Electrical and pneumatic schematics - Control language in German.

Kondisi: baik (bekas), Tahun pembuatan: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact construction with control cabinet integrated into the machine base. CNC control BWO 900C, 1 MB memory, integrated PC. Technical data: Working ranges / working envelope: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm, with fixture height of 120 mm A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 45 m/min. Z-axis: 15 m/min. Ledpfxeir Aq To Afioaa A/B-axis: 10,000°/min. 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed from 2,000 to 24,000 rpm, rated power from 12,000 rpm onwards. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 travelling drum-type tool magazine for 10 tools up to 60 mm diameter and - depending on tool diameter - up to 130 mm length from zero reference. Aluminium worktable 1,000 x 1,000 mm with matrix drilling pattern 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioning unit. Workplace safety: Sliding door for front loading, safety enclosure for the rear of the machine, with side access door, enclosure open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (residual-current device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Kondisi: sangat baik (bekas), Nomor katalog 7266 DATA TEKNIS - Lebar poros: 530 mm - Poros 4 pisau - Sisir peredam suara - Pelindung poros - Panjang meja: 2900 mm - Meja masuk lebih panjang: 1655 mm - Meja dari besi cor - Kedua meja dapat diatur - Pemandu asli dari besi cor, dapat disetel - Rem - Diameter saluran ekstraksi: 140 mm - Motor: 4 kW Lajdpeyz Nntefx Afiea - Dimensi (P/L/T): 2900x1000x1210 mm - Berat: 695 kg KEUNGGULAN – Produksi Jerman – Poros 4 pisau – Rem – Sisir peredam suara – Meja masuk lebih panjang – Tidak dicat ulang – Mesin jointer bekas, kondisi sangat baik Foto asli Video pengoperasian mesin: youtube.com/watch?v=v_3ECkLDWVI Harga netto: 18.900 PLN Harga netto: 4.500 EUR tergantung kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi nilai tukar yang signifikan)

Kondisi: bekas, Tahun pembuatan: 2003, Panjang sled: 3000 mm Lebar potong pada pagar lebar: 1250 mm Lebar potong pada pagar melintang: 2800 mm Kedalaman potong: 125 mm Scorer: tidak Penyesuaian ketinggian mata gergaji: roda tangan Penyesuaian kemiringan mata gergaji: roda tangan Penyesuaian pagar lebar: manual Indikasi sudut mata gergaji: skala Lsdpfx Asy A Hi Dofisaa Indikasi tinggi potong: - Indikasi pagar lebar: skala Indikasi penggaris potong: skala Diameter mata gergaji: 400 mm Kecepatan putar: 3200 / 4000 / 6000 Daya motor: 5,5 kW Rem motor: ya / otomatis Sambungan ekstraksi: 80 mm dan 125 mm Panjang mesin: 3400 mm Lebar mesin: 1800 mm Berat: 820

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 1.645 mm, jarak lintasan sumbu Y: 1.760 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: SIEMENS, model controller: 840D s, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 24, jumlah sumbu: 3, MAKA DC 3 3-sumbu ini diproduksi pada tahun 2016. Mesin ini memiliki rentang kecepatan spindle hingga 18.000 rpm dan perjalanan sumbu yang mengesankan: 1645 mm pada sumbu X, 1760 mm pada sumbu Y, dan 600 mm pada sumbu Z. Mesin ini memiliki ukuran meja 1200 x 1400 mm serta majalah alat dengan kapasitas 24 alat. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal MAKA DC 3 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. Lasdjyycdljpfx Afisa • Ukuran Meja: 1200 × 1400 mm Spesifikasi Teknis Ukuran Tirus SK 40

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Putaran kiri-kanan, 3-1000 rpm, motor rem dengan sistem feeder 3 rol Haffner, 8 kecepatan, kondisi baik. Pengiriman bisa dilakukan dengan biaya tambahan! Lasdpoybv A Asfx Afioa

Kondisi: bekas, Tahun pembuatan: 1973, Lokasi gudang: Nattheim Ljdpsvvkt Usfx Afijaa

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Tahun pembuatan: 1993 Perlengkapan dan data teknis: - Spindel frais tetap; bantalan baru - Dengan perpanjangan meja dan penyangga rangka tarik 2500 mm - Motor 5,5 kW - Kecepatan 3000/4500/6000/8000/10000 rpm - Penghenti frais dengan 2 pengaturan: - penghenti penuh - rahang pelepas belakang - Hood penghisap: 2 x 120 mm - Rem motor otomatis - Putaran kanan-kiri - Dengan feeder Haffner 4 rol Berat sekitar 700 kg Ketersediaan: sesuai kesepakatan Lokasi: Flörsheim Laedpsw I Uinofx Afioa

Kondisi: diremaj di bengkel (bekas), Mortising Machine, Oscillating Chisel Mortising Machine MAKA Type DB 5 with numerous mortising tools, see photos Workpiece stop, 2 pieces Stop rail right / left, 2150 mm Workpiece ejection, 2x Foot pedal Pneumatic side workpiece clamping, 1 piece Pneumatic top workpiece clamping, 2 pieces Extraction connection, Ø 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: Laodpfev Hm Nmex Afija • Technical data subject to change without notice and prior sale reserved. • Prices shown are ex-works, loaded free on truck! • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Kondisi: sangat baik (bekas), Mesin Perata MAKA 530mm 4 pisau tradisional Lodpfx Afoyybv Hsieaa lebar 530 mm panjang meja 2900 mm lis penahan suara pemandu sudut dapat diatur listrik 380V, 4KW rem, mesin kokoh, kondisi sangat baik, sudah diuji

Kondisi: sangat baik (bekas), Very good condition. Lodpfoyxnxlsx Afijaa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, nomor mesin/kendaraan: 8905829, daya: 3 kW (4,08 hp), tegangan masuk: 380 V, lebar perataan: 430 mm, lebar total: 600 mm, tinggi total: 1.200 mm, panjang meja: 2.750 mm, Planing width: max. 430mm, table length 2750mm 4-knife cutterblock with reversible knives, serrated table lips Chip thickness adjustment via handwheel with magnifier display Motor: 3kW, 380V Lajdpjuivw Tsfx Afiea Condition and further details as per photos

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jumlah sumbu: 5, el Lajdpfsx D Ebxox Afisa

Kondisi: bekas, Tahun pembuatan: 1999, Dowel hole drilling device: pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Ljdpfx Ajv S Diuofijaa Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Kondisi: bekas, Tahun pembuatan: 1992, dengan poros pisau Centrofix bekas, kondisi baik, sedikit jam kerja Merek: Maka Tipe: AH 430 tahun produksi: 1992 No. mesin: 9201531 diuji debu kayu GS Motor 3,0 kW Panel kontrol di atas Lodpfxoxuv Rrs Afisaa Lebar penyerutan sekitar 430 mm Panjang meja masuk sekitar 1500 mm Panjang meja keluar sekitar 1200 mm Pelindung ayun Bibir meja ber-slot/peredam suara Jumlah pisau: 4 buah Poros pisau Centro Fix Penyesuaian meja dengan roda tangan Rem otomatis Koneksi ekstraksi D 140 mm Kebutuhan ruang sekitar 2700 mm x 1200 mm x 1400 mm Berat sekitar 800 kg Lokasi penyimpanan: 97447 Gerolzhofen, bebas muat, tanpa kemasan Penyerahan dalam kondisi apa adanya seperti dilihat, tanpa garansi dan jaminan

Kondisi: sangat baik (bekas), Stempelsaggregat: 1 stk Lajdpfx Aeyi Hufjfisa Maks. stempeldybde: ca. 130 mm Tilkoblingseffekt: 2,5 kW Vertikaljustering: 100 mm Svingmeisel-stemme-maskin Maka type STV 170 for stempling eller fræsning af rektangulære huller, f.eks. låsekasser.