Beli Mash Tangki bekas (2.864)

Kondisi: bekas, jarak tempuh: 382.416 km, daya: 290 kW (394,29 hp), pendaftaran pertama: 10/2007, jenis bahan bakar: diesel, berat kosong: 6.450 kg, berat muatan maksimum: 8.550 kg, ukuran ban: 305 / 70 R 22.5/10mm, konfigurasi gandar: 4x2, inspeksi berikutnya (TÜV): 01/2025, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, kelas emisi: Euro 4, suspensi: baja-udara, jumlah tempat duduk: 2, lebar total: 25.500 mm, ukuran ban depan: 305 / 70 R 22.5/10mm, berat operasi: 15.000 kg, Perlengkapan: pendingin udara,

Kondisi: bekas, jarak tempuh: 686.713 km, daya: 420 kW (571,04 hp), pendaftaran pertama: 07/2015, jenis bahan bakar: diesel, berat kosong: 12.880 kg, berat muatan maksimum: 19.120 kg, ukuran ban: 315 / 80 R 22.5 / 11mm, konfigurasi gandar: 8x2, inspeksi berikutnya (TÜV): 01/2026, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat duduk: 2, panjang total: -2 mm, lebar total: 25.500 mm, ukuran ban depan: 315 / 80 R 22.5 / 11mm, berat operasi: 32.000 kg, Perlengkapan: pendingin udara,

Kondisi: bekas, pendaftaran pertama: 06/1974, lebar total: 25.500 mm, suspensi: baja, ukuran ban: 12 / 22.5 / 10mm, ukuran ban depan: 12 / 22.5 / 10mm, berat operasi: 12.000 kg,

Kondisi: bekas, berat kosong: 2.800 kg, berat muatan maksimum: 9.200 kg, pendaftaran pertama: 08/1995, inspeksi berikutnya (TÜV): 05/2016, lebar total: 25.500 mm, suspensi: baja, ukuran ban: 295 / 80 R 22.5 / 8mm, ukuran ban depan: 295 / 80 R 22.5 / 8mm, berat operasi: 12.000 kg,

Kondisi: bekas, Tahun pembuatan: 2002, Tangki baja tahan karat ganda Roth, 2 x 30,015 liter. Kondisi: Baik Pedpfxozmakmo Adiopw Lokasi Tambahan: E1

Kondisi: baru, Tahun pembuatan: 2026, EN_AIR_TANK_270L_HIGH_QUALITY_PRESSURE_VESSEL_FOR_COMPRESSED_AIR _SYSTEMS Key Advantages of the 270 L Pressure Vessel - Professional-grade pressure vessel – manufactured from high-quality 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Operating pressure of 11 bar – suitable for most pneumatic systems, including those with higher requirements. - High capacity – 270 litres – enables reliable supply to the pneumatic installation and reduces compressor start frequency. - Multi-connection port system – five ports with diameters of 1", 2", and 1/2" allow flexible integration into various systems. - High-quality workmanship – durable anti-corrosion coating on both the interior and exterior surfaces of the tank. - Universal installation position – vertical design saves space at the facility. Design and Technology – Robust Construction for Demanding Applications This compressed air tank is engineered for intensive industrial use. The body is made from structural steel with a 4 mm wall thickness, ensuring resistance to pressures up to 11 bar and long service life. All welds are subject to rigorous quality control, and the tank surfaces are protected by a chemical- and weather-resistant anti-corrosion coating. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for operation in both Polish and European markets. The package includes comprehensive technical documentation, a pressure vessel passport, and material certificates. Standard Equipment - Connection ports: 5 pcs – diameters: 1", 2", 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating Ppedpexbzalefx Adiew

Kondisi: baru, Tahun pembuatan: 2026, AIR RECEIVER TANK 500 L – PREMIUM QUALITY PRESSURE VESSEL FOR COMPRESSED AIR INSTALLATIONS Main advantages of the 500 L pressure vessel: - Professional pressure design – constructed from high-grade 4 mm steel, resistant to both pressure and corrosion. - UDT Certification and CE Marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for the majority of pneumatic systems, including those with increased requirements. - High capacity – 500 litres – enables stable supply to the pneumatic installation and reduces the frequency of compressor start-ups. - Multi-connection system – 6 ports with diameters of 1.1/4", 2", and 1/2" allow for flexible integration with various installations. - High-quality workmanship – durable anti-corrosion coating applied to both the internal and external surfaces. - Universal installation position – vertical design enables space savings in the facility. Construction and technology – robust design for demanding applications This compressed air tank is engineered for heavy-duty use in industrial environments. The body is made of 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and long-term operation. All welds undergo rigorous quality control, and the tank surfaces are protected with an anti-corrosion paint resistant to chemicals and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both Polish and European markets. The delivery includes complete technical documentation, a passport, and material certificates. Precision and work efficiency – stable pressure and optimal compressor usage With its large 500-litre capacity, the tank serves as an air buffer, stabilising pressure throughout the entire pneumatic system. This ensures consistent operation of compressed air-powered equipment and significantly extends compressor lifespan by reducing the number of start/stop cycles. The vertical configuration allows for compact installation, which is particularly important in facilities with limited space. A properly selected tank for the compressor minimises pressure drops and prevents overloading of the pneumatic system, resulting in enhanced efficiency and safety of the entire installation. Standard equipment: Pjdpfoxby D Aex Adispw - Connection ports: 6 pcs – diameters 1.1/4", 2", 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, EN: 200 L COMPRESSED AIR TANK – PREMIUM PRESSURE VESSEL FOR COMPRESSED AIR INSTALLATIONS The CORMAK 200-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, full compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, this tank can act both as a storage buffer and a stabilizer for compressor operating parameters. Main Advantages of the 200 L Pressure Vessel Professional pressure vessel design – manufactured from high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliant with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with increased requirements. High capacity – 200 litres – allows for stable pneumatic system supply and reduces compressor start frequency. Multi-connection system – 6 connections with diameters of 1/2", 1", and 2" enabling flexible tank integration into various systems. Superior workmanship – durable anti-corrosion coating applied inside and outside the tank. Universal installation position – vertical design saves space in the facility. Technical Specifications: Weight (kg): 80 Connections: 6 Connection sizes: 1/2", 1", 2" Dimensions: 166.5 x 45 cm Pjdpoxbzd Refx Adiopw Tank capacity (l): 200 Working pressure (bar): 11 Wall thickness (mm): 4 Diameter (mm): Ø 450 Height (mm): 1665 Standard Equipment: Connection ports: 6 pcs – 1/2", 1", 2" Nameplate with CE mark UDT notified unit number Complete technical documentation and pressure vessel certificate Internal and external anti-corrosion protection

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, AIR RECEIVER TANK 500 L – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key advantages of the 500 L pressure vessel: - Professional pressure design – made of premium-grade 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for most pneumatic systems, including those with higher operational demands. - High capacity – 500 liters – ensures stable supply to pneumatic installations and reduces compressor start frequency. - Multi-connection system – 6 ports with diameters of 1.1/4", 2", 1/2" for flexible connection to various systems. - Robust workmanship – durable anti-corrosion coating inside and outside the vessel. - Universal mounting position – vertical design saves space in industrial facilities. Construction & Technology – robust design for demanding applications This compressed air receiver is engineered for intensive operation in industrial environments. The body is manufactured from structural steel with a 4 mm wall thickness, providing resistance to pressures up to 11 bar and ensuring long service life. All welds undergo stringent quality control, and the vessel surfaces are protected with an anti-corrosive coating resistant to chemical and atmospheric exposure. The tank is equipped with a nameplate featuring the CE symbol and the UDT notified body number, confirming its approval for operation in the Polish and European markets. The set includes complete technical documentation, pressure vessel passport, and material certificates. Standard equipment: - Connection ports: 6 pcs – diameters 1.1/4", 2", 1/2" - Nameplate with CE marking Ppodpjxbzbpefx Adiew - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The tank is used in pneumatic control systems for various devices and serves to dampen compressed air pulsation within the system, protect the optimal operation mode of the compressor, partially remove moisture and oil from compressed air, and create a compressed air reserve. Characteristics of the 1000L Pressure Vessel The compressed air pressure vessel is a cylindrical pressure device composed of two elliptical heads, a shell with nozzles, and valves. Its main function is to dampen pulsations in the compressed air system, which contributes to optimal compressor performance and aids in the removal of moisture and oil from the compressed air. High-quality pressure vessels are particularly effective in demanding working conditions. Our 1000-liter, 11-bar pressure vessel is a robust and capacious device, ideal for storing compressed air and other gases at high pressure. It is engineered to withstand high pressure and ensure safe gas storage. This vessel is suitable for use across various sectors, including industry, construction, automotive, and home workshops. It can be easily connected to an air compressor or other compressed air generation devices, providing a reliable gas source for production processes and service applications. Thanks to its 1000-liter capacity, this tank allows for extended operation without frequent refilling. The 11-bar working pressure means the tank can store gas at high pressure, which is especially useful for applications requiring higher power. Our 11 bar 1000 L pressure vessel is robustly manufactured from high-quality materials, ensuring durability and safety. It is equipped with suitable valves and safeguards to prevent leaks and maintain safe pressure levels. Furthermore, our tank is supplied with complete documentation, certificates, material test reports, and manufacturing traceability. It has also undergone inspection by a Notified Body of the Office of Technical Inspection. It features a nameplate with the CE mark and the Notified Body number for UDT. In summary, the 1000-liter, 11-bar pressure vessel is a reliable device for storing compressed air or other gases under high pressure. Its versatile applications make it a constant gas source for various industrial or utility operations. Our range includes a wide selection of pressure vessels in different capacities, making it easy to select the right model for the specific needs of your facility. Our tanks are manufactured from high-strength steel with increased pressure resistance and are coated with a properly prepared finish on both internal and external surfaces. Models are available for either vertical or horizontal installation, allowing flexible adaptation to site requirements. Our vessels are also widely used in pneumatic control systems for various machinery. Technical Data: Weight (kg): 230.00 Connections: 8 Ppsdsv Axzmspfx Adisw Connection size: 1/2", 2" Dimensions: 222.7 x 85 cm Tank capacity (l): 1000 Working pressure (bar): 11 Wall thickness (mm): 5 Diameter (mm): Ø 850 Height (mm): 2250 Manufacturer: Cormak

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Screw compressors from the Polish brand CORMAK guarantee quality and reliability. Our many years of experience in compressor sales have enabled us to create models that offer an excellent price-to-performance ratio. The presented model is ideal for small workshops or small manufacturing businesses. It is characterized by high efficiency (380 l/min) relative to its compact size, allowing for the simultaneous operation of several devices. The very low noise level (60 dB) ensures that working in the same room is not problematic. Are you looking for an efficient and reliable compressor, suitable for smaller workshops, service points, or hobby applications, while also requiring single-phase power? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive actual performance of up to 400 l/min, it provides a constant supply of compressed air, essential for the effective operation of impact wrenches, blow guns, or spray painting tools. The LUFT 400 stands out with its reliable direct drive system, eliminating vibrations and the need to maintain belt transmissions. This proven solution ensures stable operation and long service life, providing direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the device's operating parameters is ensured by the intuitive MAM series electronic control panel, which provides access to key compressor information, increasing flexibility and process control. Permanent Magnet Motors (PM Motors) are an innovative approach in electric drives, offering significant advantages compared to traditional induction motors. The inverter, also known as a frequency converter, is an advanced electronic device that has revolutionized the operation of screw compressors. Its use allows for smooth adjustment of the compressor motor's speed according to the current demand for compressed air. High-quality Cormak screw compressors, such as the LUFT 400 model, are based on technologically advanced screw modules, which are the foundation of their efficiency and reliability. By combining proven solutions and innovations, Cormak ensures that each module is refined to the smallest detail to meet even the most demanding operational requirements. In Cormak screw compressors like the LUFT 400, a key element ensuring reliability and optimal operation is the advanced MAM series control panel. Designed for effective management of the compressed air system, this controller enables real-time monitoring and rapid response to all working parameters. Technical Specifications Motor power: 3.0 kW / 4 HP Ppedpfjza Al Usx Adiew Voltage: 230V/50Hz Performance at 0-6 bar: approx. 400 L/min Performance at 6 bar: 390 L/min Performance at 8 bar: 380 L/min Performance at 10 bar: 380 L/min Outlet connection diameter (G): 1/2" Dimensions: 1130 x 520 x 1300 mm Weight: 170 kg

Kondisi: baru, Tahun pembuatan: 2026, Screw Compressor CORMAK LUFT 700 VSD+PM Compact with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer. 500 L horizontal compressed air receiver. Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series are equipped with Permanent Magnet (PM) motors. Unlike conventional induction motors: They achieve efficiency levels in accordance with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (where standard motors lose their efficiency outside their nominal range). They are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an ‘all-or-nothing’ (load/unload) mode. If your machine only requires 30% output, the compressor reduces its speed, proportionally lowering energy consumption. Elimination of idle running: Conventional compressors often continue to run idle for several minutes after the receiver is filled, consuming approx. 25–30% of their rated power without producing compressed air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the plant’s electrical installation. Enables frequent starts and stops without risk of winding overheating. 4. Real Savings In practice, using the Energy Saver line can reduce electricity costs by 30% to 50% compared to conventional fixed-speed compressors. Additionally, the system keeps network pressure extremely stable (accuracy up to 0.1 bar), which is essential for precision equipment such as laser cutters. Longer lifespan: The absence of sudden pressure and temperature fluctuations extends the screw element’s operating life. Technical specifications Motor power 5.5 kW / 7.5 HP Voltage 400V/50Hz Output at 0–6 bar average 690 L/min Output at 6 bar 690 L/min Output at 8 bar 650 L/min Output at 10 bar 650 L/min Ppodpfx Adeycg Ryjijw Outlet connection diameter (G) 1/2" Dimensions 1840 x 640 x 1470 mm Weight 320 kg

Kondisi: baru, Tahun pembuatan: 2026, CORMAK LUFT 1500 VSD+PM Compact Screw Compressor with dryer – a compact set for demanding applications - ENERGY SAVER THE SET INCLUDES: LUFT 1500 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer. HORIZONTAL COMPRESSED AIR RECEIVER, 500 L. Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series are equipped with Permanent Magnet motors. Compared to conventional induction motors: They offer efficiency compliant with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (standard motors lose efficiency outside their nominal range). Are more compact, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) The heart of the Energy Saver line is the frequency inverter (variable speed drive). Demand-driven operation: The compressor does not operate in a simple "all-or-nothing" (load/unload) mode. If your machine requires only 30% output, the compressor reduces its speed, consuming proportionally less energy. Elimination of idling: Conventional compressors often continue running for several minutes after the tank is filled, drawing about 25–30% of nominal power while not producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This results in no sudden current surges at startup, which: Protects the electrical installation in your facility. Allows for more frequent starts and stops without the risk of winding overheating. 4. Genuine Energy Savings In practice, implementing the Energy Saver line enables a reduction of electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Moreover, the system maintains extremely stable network pressure (accurate to 0.1 bar), which is crucial for precision equipment such as laser cutters. Extended lifetime: The absence of rapid pressure and temperature fluctuations extends the screw element’s operating life. Technical specifications Motor power: 11 kW / 15 HP Voltage: 400V/50Hz Free air delivery 0-6 bar: 1620 L/min Free air delivery at 6 bar: 1580 L/min Free air delivery at 8 bar: 1350 L/min Free air delivery at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 x 740 x 1750 mm Pjdpfsychbasx Adispw Weight: 500 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: • LUFT 1000 VSD+PM COMPACT screw compressor with integrated dryer. • 500L horizontal compressed air receiver. Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet (PM) motors. Unlike standard induction motors: • They offer efficiency levels at IE4 or even IE5 class. • They maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). • They are smaller, lighter, and produce less heat. 2. Advanced Variable Speed Drive Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). • Demand-based operation: The compressor does not operate in a simple “all or nothing” (load/unload) mode. If your machine only needs 30% output, the compressor reduces speed, consuming proportionally less energy. • Elimination of idle running: Conventional compressors often keep running for several minutes after the tank is filled, using around 25-30% of nominal power without producing air. Energy Saver models virtually eliminate these wasteful losses. 3. Smooth Start (Soft Start) Pedpoycg Ufefx Adijpw Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current spikes at startup, which: • Reduces stress on the facility’s electrical system. • Allows more frequent start/stop cycles without risk of winding overheating. 4. Genuine Energy Savings In practice, using the Energy Saver line can reduce electricity costs by 30% to 50% compared to conventional fixed-speed compressors. The system also maintains highly stable network pressure (accurate to 0.1 bar), which is critical for precision equipment such as laser cutters. Longer lifespan: The absence of sudden pressure and temperature spikes extends the screw stage’s operational life. Technical Specifications Motor power 7.5 kW / 11 HP Voltage 400V/50Hz Free Air Delivery 0–6 bar average 990 L/min FAD @ 6 bar 990 L/min FAD @ 8 bar 950 L/min FAD @ 10 bar 950 L/min Outlet connection diameter (G) 3/4" Dimensions 1495 x 600 x 1600 mm Weight 350 kg

Kondisi: baru, Tahun pembuatan: 2026, CORMAK LUFT 700 VSD+PM Compact Rotary Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Rotary Screw Compressor with integrated dryer 270 L horizontal compressed air receiver tank Key features that distinguish these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency in line with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (standard motors lose efficiency outside their nominal range). Are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) At the heart of the Energy Saver range is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate in an "all or nothing" load/unload system. If your machine only requires 30% output, the compressor reduces speed and uses proportionally less energy. Elimination of idle running: Conventional compressors often continue running for a few minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges at startup, which: Protects your facility’s electrical installation. Ppedeycg I Sjpfx Adisw Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Genuine Savings In practice, using the Energy Saver range allows you to reduce electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains highly stable network pressure (accurate to 0.1 bar), which is crucial for precision equipment such as laser cutters. Increased longevity: No sudden spikes in pressure or temperature, resulting in longer rotary screw unit service life. Technical specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0–6 bar: average 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Kondisi: bekas, jarak tempuh: 158.175 km, daya: 301 kW (409,25 hp), pendaftaran pertama: 09/2004, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: oranye, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, lebar total: 2.550 mm, tinggi total: 3.850 mm, Perlengkapan: ABS, pendingin udara,

Kondisi: bekas, jarak tempuh: 118.000 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 04/2019, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: merah, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, Tahun pembuatan: 2019, Perlengkapan: ABS, pendingin udara,

Kondisi: baru, daya: 184 kW (250,17 hp), pendaftaran pertama: 02/2023, jenis bahan bakar: diesel, ukuran ban: 14.00R20, konfigurasi gandar: 4x4, jarak roda: 4.500 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 300 l, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 4, suspensi: baja, volume ruang muat: 10 m³, Tahun pembuatan: 2023, Perlengkapan: AdBlue, pendingin udara,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WMA06SZZ5CW165056, jarak tempuh: 304.000 km, pendaftaran pertama: 12/2012, jenis bahan bakar: diesel, berat kosong: 9.845 kg, berat muatan maksimum: 9.155 kg, berat keseluruhan: 19.000 kg, konfigurasi gandar: 4x2, jarak roda: 4.200 mm, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, suspensi: baja-udara, jumlah tempat duduk: 2, Tahun pembuatan: 2012, Perlengkapan: ABS, Bluetooth, Tachograph, bantuan mulai menanjak, kemudi berkuasa, kendali jelajah, komputer bawaan, kunci sentral, lampu depan tambahan, lampu kabut, pendaftaran truk, pendingin udara, program stabilitas elektronik (ESP), riwayat servis lengkap, spion elektrik, Freshly imported offer from our long-standing supplier in Norway, specializing in fuel transport within the Oslo area. The truck comes from its first owner, purchased directly from the company that operated it until our acquisition. The GERMAN "Akf Kambo" body provides a maximum capacity of 11,000 liters thanks to its three chambers: 1. 3,000L + 2. 5,000L + 3. 3,000L – This allows for transportation of different fuels or oils. Additionally, it features 3 valves for filling each chamber independently. It is also equipped with a pump that allows both draining and refilling of liquids. The MAN has been regularly serviced, initially at an authorized service center (ASO) and later at the company’s workshop. The price includes a complete set of documents for registration. If required, we also perform UDT inspections quickly and at an additional cost. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With payment by cash or bank transfer, you can drive the vehicle out of the showroom immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – TRY US! We also deliver paid cars and trucks to any address across Europe. For more information about our services, please contact our sales representatives. Weights and dimensions: Gross Vehicle Weight (GVW): 18,000 kg (structurally 19,000 kg) Curb weight: 9,770 kg (with driver 9,845 kg) Payload: 9,155 kg External dimensions: Length: 830 cm Width: 255 cm Height: 340 cm Pjdow Enmcepfx Adiopw Wheelbase: 4,200 mm Emission standard: EURO 5 Equipment: Sleeping cab Auxiliary heating – WEBASTO Automatic air conditioning Cruise control Automatic gearbox Multifunction steering wheel On-board computer Central locking 2 Seats Leather steering wheel Rear air suspension Air-suspended driver's seat Sleeper bed Power windows and mirrors Heated mirrors Reversing camera Original MAN radio CD, USB, AUX Headlamp washers Pump for pumping in and out fuel or oils Additional body lighting Rear axle differential lock Heated driver's seat Tachograph Retarder Manual sunroof Sun visor Daytime running lights Fog lights ABS Condition report: The MAN drove to us from Norway on its own wheels without any issues. The truck still has a valid Norwegian inspection, meaning it is fully operational and roadworthy. We have checked the vehicle mechanically and technically – everything is in good condition, and the vehicle has never been involved in an accident. All body panels are original. Currently, the truck is on winter tires sized: Front tires: 385/65 R 22.5 – tread depth 80% Rear tires: 295/80 R 22.5 – tread depth 70% The listed price is net and applies to export and companies. For private customers, a significant discount is possible – Please contact us directly by phone to obtain your best price :)

Kondisi: baru, jarak tempuh: 2 km, daya: 265 kW (360,30 hp), jenis bahan bakar: diesel, ukuran ban: 13 R 22.5, konfigurasi gandar: 4x4, jarak roda: 4.200 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 290 l, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, suspensi: baja, volume ruang muat: 12.000 m³, Tahun pembuatan: 2026, Perlengkapan: komputer bawaan, pendingin udara,

Kondisi: baru, daya: 294 kW (399,73 hp), jenis bahan bakar: diesel, ukuran ban: 13R22.5, konfigurasi gandar: 6x4, jarak roda: 4.500 mm, bahan bakar: diesel, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: euro2, suspensi: baja, volume ruang muat: 20 m³, Tahun pembuatan: 2023, Perlengkapan: pendingin udara,

Kondisi: bekas, jarak tempuh: 1.001 km, warna: putih, kabin pengemudi: lain, tipe perpindahan gigi: lain,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 235,36 kW (320,00 hp), konfigurasi gandar: 4x4, bahan bakar: diesel, warna: merah, tipe perpindahan gigi: semi-otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2025, Perlengkapan: kantung udara, kopling trailer, kunci diferensial, kunci sentral, pendingin udara, penggerak semua roda,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 375,1 kW (509,99 hp), konfigurasi gandar: 4x4, bahan bakar: diesel, kelas emisi: Euro 6, Tahun pembuatan: 2025, Perlengkapan: kantung udara, kopling trailer, lampu depan tambahan, pemanas parkir,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 34.000 km, daya: 161,81 kW (220,00 hp), konfigurasi gandar: 4x4, bahan bakar: diesel, Tahun pembuatan: 1995, Perlengkapan: kopling trailer, lampu depan tambahan, penggerak semua roda,