Beli Meninju Crucible bekas (184)

Kondisi: bekas, Tahun pembuatan: 1978, nomor mesin/kendaraan: 5042, Pressing force: 25 t Adjustable ram stroke: 13 - 38 mm Ram adjustment: 51 mm Die height (stroke down, adjustment up): 230 - 281 mm Max. tool dimensions: 430 x 360 mm Strokes per minute: 100 - 1,500 min⁻¹ Clamping area of table approx.: 530 x 530 mm Drive power: 18 kW Dimensions (LxWxH): 2,075 x 1,355 x 2,620 mm Machine weight approx.: 4.5 t Feed: Sheet width: 200 mm Additional equipment: Press force monitoring and tool protection Siegfried Hedpfx Aasuqdxvo Nofb Automation: Including Bruderer BBV 202 feeder

Kondisi: bekas, Krause C64-50 Autofeed Die Cutter ini adalah mesin yang kuat, dirancang untuk kerja pemotongan yang presisi dan efisien. Dengan format maksimum 600 x 500 mm, mesin ini menawarkan fleksibilitas untuk memproses berbagai jenis material. Mesin saat ini berada di Belanda dan dalam kondisi berhenti, menjadikannya peluang ideal bagi calon pembeli yang mencari mesin pemotong berkualitas tinggi. Hfedpsvfx Ulsfx Aa Nsb Format: 600 x 500 mm Perlengkapan: Mesin pemotong Krause dengan pengumpanan otomatis Ukuran maksimum: 60 x 50 cm (23 x 19 inci)

Tahun pembuatan: 1985, Kondisi: sangat baik (bekas), Automatic punching machine with coil feed line Table size: 1240 x 1265 mm Shut height: 400 mm Ram adjustment: 150 mm Hsdom Twuvjpfx Aa Nsfb Ram surface: 1060 x 950 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, nomor mesin/kendaraan: 1203697, Translated Used Eccentric Press (Double Connecting Rod) Manufacturer: Haulick & Roos Model: RVD 8/800 NS Press with separate control panel: Haulick & Roos RVD 80-800NS Hfedpjudn Utsfx Aa Nsb Eccentric press with double connecting rods and quadruple-supported eccentric shaft Serial number: 1203697 Year of manufacture: 1990 Press force: 800 kN Stroke rate: 30–300 strokes/min Drive: 26 kW Ram stroke adjustment: 4–60 mm Ram adjustment: 80 mm Table size: 800 x 640 mm Pass-through hole: 780 x 60–160 mm Table height above floor: 1240 mm Upright (frame) width: 780 mm Upright side clearance: 350 mm Shut height (max stroke down/ram up): 300 mm Space requirement for press (L x W x H): 3200 x 1700 x 3000 mm Control cabinet (L x W x H): 1800 x 400 x 1900 mm Weight: 12,000 kg Decoiler: Eigl 2527-90 Powered: No Straightener with loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300 mm Max. thickness: 3 mm Number of rollers: 5 Feeder: Haulick & Roos RS 260/120°/2727 Max. feed length: 260 mm Max. width: 260 mm Max. thickness: 3 mm Feed speed: 40 m/min Material cross-section up to 800 mm? (Please clarify if 800mm refers to width or overall cross section.)

Kondisi: baik (bekas), BRUDERER BSTA 30 Punch Press with 2 Decoilers and Sound Enclosure - Max. pressing force: 30 tons - Stroke rate: 100 to 600 SPM (strokes per minute) - Drive power: 0.96 to 5.5 kW - Width: 1200 mm - Depth: 1160 mm Hodpfxsvb Nm Do Aa Nofb - Height: 2150 mm In good condition, fully operational. The machine can be inspected and tested under power on site. Worldwide shipping available. Inspection: To avoid misunderstandings, I would like to point out that this item can be viewed and tested under power prior to purchase. Please ask any questions you may have before purchasing to avoid confusion. For general queries or to arrange a viewing appointment, you can contact me at any time via the phone number listed below or above. Subject to prior sale and errors excepted. VAT will be shown separately on my invoices. Shipping via freight forwarder.

Kondisi: baik (bekas), Tahun pembuatan: 1997, gaya punching: 350 t, berat keseluruhan: 4.500 kg, tegangan masuk: 380 V, frekuensi input: 50 Hz, Stanztiegel TMZ tipe L122, tahun pembuatan 1997, format 93x126 cm, gaya tekan 350 ton, kecepatan 1400 putaran/jam, rangka penjepit cepat, alas kaki pengaman, dalam kondisi baik, siap tersedia segera. Hsdpfx Aaex Dilhe Nsfb

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 105981, Pressing force: 45 t Adjustable ram stroke: 20 - 80 mm Ram adjustment: 50 mm Die height (bottom stroke, top adjustment): 300 mm Clearance between uprights L-R: 710 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 700 x 360 mm Pass-through opening in table: 600 x 100 mm Hjdpfeuqc Ngjx Aa Njfb Strokes per minute: 80 - 400 min-1 Power requirement: 10 kW Height above floor approx.: 2900 mm Machine weight approx.: 7.2 t Control system: Siemens S7 Standard equipment: With gripper feed Machine was completely overhauled in 2001 with SIEMENS S7 control.

Kondisi: bekas, Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, de Hfedpfx Ajx Ei Tkja Nob

Kondisi: bekas, Tahun pembuatan: 2001, SanGiacomo Press Model: T250 DM Gaya tekan: 2.500 kN Penyesuaian langkah: 21 - 230 mm Penyesuaian ram: 120 mm Jumlah langkah: hingga 75 1/menit Luas ram: 2.300 x 1.090 mm Luas meja: 2.300 x 1.090 mm Hfjdpfx Ajx Ex Dxea Neb Dimensi: 3.550 x 1.910 x 5.200 mm (P x L x T) Berat mesin: 42.000 kg

Tahun pembuatan: 1991, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Punch industri untuk pemrosesan profil aluminium dan PVC. Mesin ini sepenuhnya berfungsi dan cocok untuk berbagai aplikasi dalam konstruksi logam. Spesifikasi teknis: • Produsen: elumatec • Tipe: ST 225 • Gaya potong: 6.000 kp pada 10 bar Hedpew Tcrhsfx Aa Nsfb • Tahun pembuatan: 05/1991 Dimensi: 61 cm x 35 cm x 46 cm (t x l x d)

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, Gaya tekan: 2x200 kN, jumlah langkah: 40 - 300 langkah/menit, langkah: 50 mm, kopling: pneumatik, tegangan: 380 V, berat mesin: 2.200 kg, pelontar tambahan, dengan konstruksi diperkuat dari pabrik. Hfodexx T Hfjpfx Aa Neb

Kondisi: baik (bekas), Table size: 350x350 mm Hedefm A Amspfx Aa Njfb

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: 2177/03/9604014, de-hu-001 Hfsdpfsuqdzdjx Aa Nsb

Jam operasional: 12.000 h, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Line for punching with a Raster press, comprising: 1) Dimeco Alipresse decoiler, type 2330DF, equipped with an SV tracking and speed adjustment system. 2) Dimeco Alipresse powered straightener, type 1645, fitted with an SV tracking and speed adjustment system. 3) Raster eccentric press, type HR 60 SL-4 S, with a soundproof enclosure. Specifications available in the photos. 4) Documentation. Hsdpfjryu Taox Aa Njfb

Tahun pembuatan: 1997, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Stempel industri untuk pemrosesan profil aluminium dan PVC. Mesin ini berfungsi penuh dan cocok untuk berbagai aplikasi di konstruksi logam. Data teknis: • Produsen: elumatec Hsdow Tcpyjpfx Aa Nsfb • Tipe: ST 225 • Gaya potong: 6.000 kp pada 10 bar • Tahun pembuatan: 05/1997 Ukuran: 61 cm x 35 cm x 46 cm (t x l x p)

Kondisi: baik (bekas), Pressure: 25 t Cutting capacity (thickness / width): 1.25 / 140 mm Strokes per minute, min./max.: 250 spm Hfjdsfim Dwepfx Aa Nob Ram stroke, max.: 20 mm Table surface usable (W x D): 440 x 360 mm

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 131 542, Pressing force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 290 mm Distance between uprights L-R: 600 mm Distance between uprights (side): 190 mm Table clamping area approx.: 600 x 500 mm Ram clamping area approx.: 600 x 400 mm Through-hole in table: 500 x 110 mm Strokes per minute: 65 - 400 min⁻¹ Table height above floor: 1100 mm Power requirement: 32 kW Height above floor approx.: 2,800 mm Machine weight approx.: 6.2 t Additional equipment Hedpfx Aeuqc Ezea Nefb In 2002, the machine was retrofitted with a roller feed Model MWVL-200, year of manufacture 2002

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: 130861, Press force: 50 t Ram stroke: 54 mm Ram adjustment: 80 mm Installation height (stroke bottom, adjustment top): 303 mm Table clamping area approx.: 810 x 550 mm Number of strokes per minute: 65 - 400 min⁻¹ Machine weight approx.: 7.5 t Main drive power requirement: 11 kW Standard equipment Hfedpfeuqc Hljx Aa Njb Additional equipment IMCO press force measuring device Automation Gripper feeder, type ZR18ZT1 Max. strip width 180 mm Feed length 150 mm

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: 10870, Pressing force: 50 t Adjustable ram stroke: 16 - 51 mm Ram adjustment: 64 mm Distance between uprights (L-R): 1100 mm Distance between uprights (sideways): 250 mm Table clamping surface approx.: 1080 x 650 mm Hfodpeuqd Abefx Aa Njb Ram clamping surface approx.: 980 x 420 mm Throughhole in table: 1060 x 200 mm Strokes per minute: 100 - 750 min-1 Power requirement: 22 kW Machine operating hours: 16,850 h Overall dimensions (L x W x H) approx.: 2471 x 1278 x 3150 mm Machine weight approx.: 9 t Standard equipment BRUDERER precision roller feed BBV 205 / 120

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 120 4687, Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Installation height (stroke down, adjustment up): 310 mm Distance between uprights (L-R): 800 mm Table height above floor: 1,150 mm Clamping area of table approx.: 780 x 640 mm Clamping area of ram approx.: 800 x 460 mm Pass-through hole in table: 690 x 170 mm Strokes per minute: 30 - 300 min⁻¹ Power requirement: 21 kW Overall height above floor approx.: 2,900 mm Machine weight approx.: 12 t Control: Siemens S5 Standard equipment Roll feed type: WAV - RDS 2E 1125 Max. strip width: 310 mm Strip thickness: 0.3 - 3 mm Strip cross-section: 630 mm² Feed speed: 80 m/min Hfodpfxjuqc I As Aa Nob Roll diameter: 125 mm

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 315 t Hsdeuqd Tmepfx Aa Nsfb Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table clamping area approx.: 1600 x 1100 mm Ram clamping area approx.: 1600 x 1100 mm Passage opening in table: 600 x 180 mm Strokes per minute: 15 - 180 min-1 Table height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard Equipment The press was converted to CE standard in 2015. The press is equipped with a SIEMENS S7 control system. The coil line is still equipped with a SIEMENS S5 control system. Additional Equipment Stroke bars in the press table Automation KEMMERICH coil line comprising: Uncoiler: Load capacity: 5 t Straightening machine: Roller diameter: 70 mm Strip width: 300 mm Roller feeder: Roller diameter: 160 mm Feed length: 0.1 - 9,999.9 mm Strip width: 30 - 350 mm Material thickness: 0.2 - 10 mm Material cross-section: 1,500 mm² Feeding accuracy: +/- 0.05 mm Loading table

Kondisi: bekas, Tahun pembuatan: 1986, nomor mesin/kendaraan: 131234, Presskraft: 63 t Stößelhub verstellbar: 8 - 60 mm Stößelverstellung: 80 mm Einbauhöhe (Hub unten, Verstellung oben): 300 mm Tischaufspannfläche ca.: 810 x 550 mm Stößelaufspannfläche ca.: 700 x 420 mm Durchfallöffnung im Tisch: 550 x 140 mm Abstand zwischen den Ölauffangschalen: 700 mm Tischhöhe über Flur: 920 mm Hubanzahl pro Minute: 65 - 400 min-1 Maschinengewicht ca.: 8 t Abmessungen LxBxH: 2935 x 1170 x 3000 mm Hodsw Tuqpjpfx Aa Nsfb Leistungsbedarf Hauptantrieb: 11 kW Standardausstattung Zusatzausstattung Hubleisten mit Kugeln für WerkzeugwechselIMCO Presskraftmessgerät Automatisierung Zangenvorschub, Typ ZR 250Max. Bandbreite 250 mmVorschublänge 210 mm

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 131 153, Pressing force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 310 mm Distance between uprights L-R: 820 mm Table clamping area approx.: 810 x 450 mm Ram clamping area approx.: 720 x 350 mm Pass-through opening in table: 600 x 110 mm Hedpfsuqc Agjx Aa Nsfb Strokes per minute: 100 - 1,000 min-1 Table height above floor: 1,030 mm Power requirement: 19.5 kW Machine weight approx.: 6.8 t Additional equipment

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 104680, Pressing force: 45 t Adjustable ram stroke: 10 - 40 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 220 - 300 mm Hfodpjuqcwdefx Aa Neb Distance between uprights L-R: 560 mm Table clamping area approx.: 550 x 450 mm Ram clamping area approx.: 550 x 360 mm Pass-through opening in table: 450 x 100 mm Strokes per minute: 100 - 500 min-1 Power requirement: 7.5 kW Machine weight approx.: 6.2 t

Kondisi: bekas, Tahun pembuatan: 2001, nomor mesin/kendaraan: 150204, Press force: 100 t Stroke: 300 mm Slide adjustment: 125 mm Die height (stroke down, adjustment up): 600 mm Distance between uprights (L-R): 2,020 mm Distance between uprights (side-to-side): 620 mm Bolster area approx.: 2,000 x 1,000 mm Slide area approx.: 2,000 x 900 mm Pass-through opening in table: 1,700 x 300 mm Strokes per minute: 10 - 50 min⁻¹ Table height above floor: 1,200 mm Power requirement: 39 kW Height above floor approx.: 4,400 mm Dimensions (LxWxH): 5,166 x 2,500 x 4,400 mm Machine weight approx.: 38 t Hfedpfxjvmfzns Aa Nob Standard equipment Electrical overload protection SIEMENS S7 control Two-hand operation Optional equipment Automation Schleicher straightening machine (650 mm, max. 2.0 mm) Wanzke decoiler (max. 6 t) Helmerding feeder (600 mm, 0.6 - 6.0 mm)