Beli Menjepit Perangkat bekas (6.964)

Kondisi: baru, Tahun pembuatan: 2025, en-Holzkraft sliding table saw with scoring unit Compact sliding table saw with tiltable saw blade and high-quality anodized aluminum sliding table Cutting area of the compact sliding table saw is located directly at the rolling table Precision-guided sliding table made of aluminum, anodized as standard Large-format table extension on telescopic arm, adjustable lengthwise Standard table extension and width extension allow easy handling of larger workpieces The large dimensioned saw assembly made of cast iron is mounted twice to the cast base and guarantees stability, precision, smooth running, and long service life Large working table made of ground cast iron, extremely robust and resistant Smooth operation and precise cuts Aluminum sliding table Tested and proven ball contact system—millions in use Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic fence Extendable aluminum telescopic fence Angle adjustable With two professional folding stops Ek2a0i2ik Parallel fence Standard with fine adjustment and quick release Scope of delivery: Table extension Table width extension Anodized aluminum sliding table Parallel fence with round bar guidance and fine adjustment Model SC 2 classic Item No. 5504215 Technical Data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut capacity: 1660 mm Maximum cutting height at 90° with scorer: 100 mm Maximum cutting height at 45° with scorer: 79 mm Maximum crosscut width left of saw blade: 1270 mm Rip width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scorer: 315 mm Saw blade diameter max. without scorer: 315 mm Scoring blade diameter (optional): 80 mm Main saw blade speed: 4000 rpm Scoring saw blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction nozzle diameter: 120 mm Extraction nozzle diameter on saw blade protector: 60 mm Weight: 295 kg Location: Ex stock 54634 Bitburg - immediately available - Dwodpfjih Dwvsx Aayoc

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, The roller bed is also available for rent (including trial rentals). Maximum load: 400 t per set, consisting of 1x drive unit, 1x idler unit, 2x hydraulic fit-up units Workpiece diameter: 1,000 – 9,000 mm Rotation speed: approx. 70 - 1,400 mm/min Roller material: steel Control: wired handheld control pendant Dsdpeuf R Iljfx Aayswc Available options: additional idler units, synchronized control for 2 drive units

Kondisi: sangat baik (bekas), en Dwsdpfx Asw T Rqxoayec

Kondisi: bekas, Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2010, Berat sekitar 393 kg Kapasitas angkat 325 kg Panjang boom 6.000 mm Tinggi konstruksi hingga tepi bawah boom 2.600 mm Cocok untuk pelat dan permukaan kedap udara Dwodpfx Aaexdmngeysc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Separator material dari produksi ruang bersih. Hanya PP tanpa serat kaca yang diproses! Perangkat dalam kondisi seperti baru. Perangkat! Satu perangkat dengan katup hisap kosong tambahan. Satu perangkat mikro Koch. 4 hopper mesin. Harga baru sekitar €17.000. Dwedpfexdfxwex Aayoc

Kondisi: sangat baik (bekas), The FIVE clamping system consists of a series of height-adjustable columns that serve as workpiece holders. The columns are available in various heights, allowing workpieces to be inspected in their final installation position. An air cushion at the base of the columns ensures smooth movement across the measuring plate. Powerful magnets lock the column in place as soon as the air supply is reduced. The measuring software guides a gripper, mounted on the spindle of the measuring machine, to the correct position. This allows the operator to quickly place the column at the calculated target point. Dsdpfx Aasfd Dr Ioyowc A wide selection of interchangeable support and clamping modules enables the configuration of specific referencing modules for each clamping position. These referencing modules ensure the workpiece can be repeatedly attached to the FIVE column with precision. This makes it possible to remove and remount the workpiece from the measuring table at will. Accessories can be upgraded with new components according to customer requirements. Images are for reference—various sizes and quantities available. Price: on request! Assembly and commissioning possible! We are happy to provide you with a detailed quotation! Note: Our offer is directed exclusively at professional customers! (Subject to change and errors in technical data, information, and prices, as well as prior sale!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Scheppach used extraction unit RG 4000 - dust tested Technical data: Hose length: 2500 mm Dsdpfx Aajwb Hqxjyswc Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 Volt Mobile Extraction drum Availability: immediately Location: 54634 Bitburg

Kondisi: sangat baik (bekas), Mitutoyo Type: QV-L404Z1L-D Item Description: For sale is a CNC image processing measuring device from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurement in manufacturing, quality assurance, and research. Technical Data: Make / Model: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Dwsdpsw Udv Rofx Aayoc Measuring Range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED lighting system Worktable: High-precision glass stage Equipment: - Control PC with QVPAK measuring software - 2 × 22" TFT monitors - Keyboard & mouse - Control panel - Swivel caster chair for comfortable operation Scope of Delivery - Mitutoyo Quick Vision Active 404 measuring device - Control PC with QVPAK - 2× TFT monitors (22") - Keyboard, mouse - Control panel - Swivel caster chair Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications! All information is subject to confirmation.) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Height-adjustable tripod Dedpfx Aod Ey Absayjwc Clamping thread: 1/2" Weight: 5 kg incl. carrying strap

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), de-to-hu_machine_equipment Dwjdpfx Aaoxcx Amoyec

Kondisi: baik (bekas), Details on request Dwedpfsb Eu Nfex Aayoc

Kondisi: siap digunakan (bekas),

Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 1996, Perlengkapan: track baja, Dijual satu set lengkap fasilitas produksi beton pracetak. Terdiri dari: mesin pengaduk beton, lini produksi komponen beton, 44 meja bekisting dan material bekisting (panjang 5,5–7,5 m, lebar 3,2 m), stasiun penerima dan distributor meja untuk pengeringan, instalasi pengeringan, stasiun penerima dan distributor untuk dinding atau lantai beton siap pakai yang telah kering, meja kemiringan untuk menempatkan elemen saat pemuatan. Dsdpfexclfusx Aayswc

Tahun pembuatan: 2018, Kondisi: bekas, 2-vessel brewhouse mounted on a stainless steel frame as a brew block. This setup consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and draining the mash. Independent control of the thermo-oil heated jackets and bottom. The double-walled vessel is clad with insulation and features a polished interior surface. The top-mounted motor drives the cutting and stirring unit with stepless speed regulation. For lautering, there is a multi-piece perforated false bottom and a rectangular side manway for spent grain removal. Additionally, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spraying unit. - Stainless steel wort kettle/whirlpool. The vessel is double-walled and features welded heating zones in both jacket and base, heated with thermo-oil. It is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable locking mechanism, and a tangential wort inlet for knockout. The inner surface is polished. - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. The wort from one brew can thus be cooled within approximately one hour. Plates are made of stainless steel 1.4401 (AISI 316) and seals are EPDM. The wort chiller features a PT1000 temperature sensor. - Thermo-oil heater to heat the laser-welded heating zones of the brew vessels. Approximately 50-65 liters of oil are electrically heated in the thermo-oil tank to a maximum of 150°C. A safety switch automatically stops heating when 160°C is exceeded. The vessel is equipped with temperature and level sensors. A pump circulates the thermo-oil in a closed loop. - 12 hl hot water tank, standing separately on three legs, with a manway on top. The tank is heatable, insulated, and equipped with a hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with a motor power of 0.37 kW and stepless speed control. - Stainless steel piping and manual valves for redirecting product flows. Pipes are orbitally welded with polished inner surfaces. - Control unit with 10” touchscreen and PLC for brewhouse automation, housed in a stainless steel control cabinet. The following processes can be controlled and monitored: 1. On/off of agitator and cutting unit, and speed control. 2. Temperature control of mash/lauter tun. 3. Temperature control for kettle/whirlpool (separate for jacket and base). 4. On/off for product and CIP pump and speed control. 5. Display of inlet water temperature. 6. Display of wort temperature at outlet. 7. Temperature control of the thermo-oil tank. 8. Timer settings. 9. Mash program settings (multi-step mashing with up to 5 rests; adjustable times, temperatures, agitator and pump speeds). 10. Hot water tank temperature. Machine (additional): Compact brew block with hot water tank Dsdpfx Aow Tbmdeayowc Max. wort output: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / control: control cabinet with PLC and touchscreen Material: stainless steel 1.4301 (AISI 304) Base structure: brew block on stainless steel frame, hot water tank separate Equipment: mash/lauter tun; wort kettle/whirl...

Kondisi: bekas, Dressing Arm RA 1, Dressing Range: Internal: 0.5 - 32 mm (104 - 162 mm) Dwodpe Uryzsfx Aayjc External: 0.5 - 22 mm Dressing Arm RA 2, Dressing Range: Internal: 154 - 210 mm External: 10 - 65 mm Dressing Arm RA 3, Dressing Range: Internal: 22 - 70 mm (66 - 120 mm)

Kondisi: hampir baru (bekas), Atlas Xenotest Type: Xenotest Beta+ Dwedpfx Aasw Thykjyec Weathering Test Device XENOTEST BETA+ – Material Testing / Weathering Test Device with Humidification and Spray System For sale is a professional XENOTEST BETA+ weathering tester manufactured by ATLAS Material Testing Technology GmbH. This unit is used to simulate sunlight as well as weather and climate influences, and is utilized worldwide in research, quality control, and material testing applications. Features: - Professional device for UV and weather resistance testing - Ideally suited for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Equipment: - Weathering and lightfastness tester equipped with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spray system (ultrasonic humidifier, spray bars) - Measurement system with XENOSENSIV sensor for irradiance and black standard temperature monitoring - Integrated touch display for operation and programming - Pre-programmed standard tests (e.g. ISO 11341, ISO 4892-2, ISO 105-B02/B06) as well as freely definable test programs - Integrated printer for documentation (paper roll) - Water reservoir (approx. 40 liters for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information provided without guarantee!) For further questions, we are happy to assist you by phone.

Kondisi: baru, Tahun pembuatan: 2025, tekanan: 12 batang, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that collects all dust and removed materials during operation. This not only eliminates the need for extensive cleaning work, but also protects the operator and those nearby from the harmful effects of airborne particles. With a dust-free sandblasting machine, you can clean and prepare surfaces more quickly and efficiently. Thanks to intuitive controls and a user-friendly design, these machines are easy to operate even for sandblasting beginners. ✅ PR 50 Dust-Free Sandblasting Machine With its versatile applications, the PR 50 can treat a wide range of surfaces, from hard metal to delicate glass. Dodpfxoupzn Es Aayewc Our PR 50 is an excellent choice for anyone working in the automotive, construction, or cleaning industries, to name just a few. Thanks to its compact size and handy design, it is easy to operate and transport—even for those new to sandblasting.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Perangkat Motan Dossier Tahun pembuatan sekitar 2006 Tanpa layar Dsdpfx Aasucg Dksyowc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Sistem operasi Windows 14 zona Dwedpfx Aaoxb A H Heyoc

Kondisi: baik (bekas), Tahun pembuatan: 2000, Panel listrik – Unit pendingin, perangkat pendingin panel, panel distribusi, penukar panas, unit pendingin dinding, pendingin panel listrik - Produsen: Siemens, penukar panas/unit pendingin panel dari mesin CNC Milling MAHO MH 800C - Tipe: K1000 Dwedpfxjwcb Dpo Aayoc - Tegangan: 230V - Daya konsumsi: 700 W - Dimensi: 155/1100/T455 mm - Berat: 48 kg

Kondisi: bekas, Drilling device on base plate with three-jaw chuck and dual height-adjustable and horizontally adjustable mount for a drill machine. Comprising: Three-jaw chuck AROWA, 250 mm diameter, horizontally rotatable by 380° with scale, indexing, and clamping. Base frame for accommodating a drilling machine, guided on two columns and spindle height-adjustable design, featuring a horizontally adjustable mount with scale (travel: 120 mm) on the same plane. Above that, a round column provides primary height adjustment on the column with clamping. Mounted on this is a circular guide with rack-and-pinion and lever feed for the drilling procedure (stroke: 100 mm). Dsdpoc U U Udjfx Aayewc Overall space required: 600 x 400 x 850 mm (H) Weight:

Kondisi: sangat baik (bekas), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest-Type Unit Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest-type unit designed for conducting condensation water tests. Ideally suited for laboratories, quality control, or industrial applications. Technical Data & Features Model Variant: Constacon K 1000 M-TR – Condensation Water Test Chambers without Ventilation Chamber volume: approx. 1000 liters Operating mode: Manual (Type M-TR) External dimensions (W × D × H): Dsdpew Tbdpjfx Aayswc 2600 × 1120 × 1210 mm Internal chamber dimensions (W × D × H): 1535–1425 × 800–780 × 660–650 mm Test Standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operating mode are set directly on the unit. Temperature Control: PID-regulated, typical setpoints: Condensation tests: approx. 40 °C (up to max. 50 °C) Heating time: approx. 1 hour Weight: approx. 400 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the data and specifications!) For further questions, we will be happy to answer your call.

Tahun pembuatan: 1965, Kondisi: bekas, nomor mesin/kendaraan: 2383, for pipe diameter: 250 - 530 mm Dedpfxsb Nv Sto Aayewc for material thickness: 3 - 40 mm driven by: manual operation space requirement: 1000 x 800 x 1200 mm weight: approx. 70 kg

Tahun pembuatan: 1983, Kondisi: bekas, nomor mesin/kendaraan: 80295, Payload capacity: 300 kg Dwodpfx Ao Rw Nqsayec Weight: 550 kg Overall height: 1000 mm

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: 8855, Lifting capacity: approx. 300 kg Lift: 1500 mm Fork length: 4 load forks, 600 mm Weight: approx. 80 kg Space requirement: 1500 x 920 x 1340/2070 mm Djdpfx Aasb Nwi Nsyowc